Sometimes we also used `@return` or `@returns`, but `@type` is what
the JSDoc documentation recommends. This also improves the documentation
because before this commit the types were not shown and now they are.
All of these methods have been marked as `deprecated` in *three* releases now, and I'd thus like to (slowly) move towards complete removal.
However rather than just removing the methods right away, which would cause somewhat cryptic failures, this patch tries to implement a hopefully reasonable middle ground by throwing `Error`s with (essentially) the same information as the previous warnings.
While the previous `deprecated` messages could perhaps be seen as optional, with these changes API consumers will now be forced to actually migrate their code.
By default, i.e. with workers enabled, it's *purposely* not possible to send `Dict`s and `Stream`s from the worker-thread. This is achieved by defining a `function` on every `Dict` instance, since that ensures that [the structured clone algoritm](https://developer.mozilla.org/en-US/docs/Web/API/Web_Workers_API/Structured_clone_algorithm) will throw an Error on `postMessage`.
However, with workers *disabled* we fall-back to the `LoopbackPort` implementation which just ignores any `function`s, thus incorrectly allowing sending of data which *should* be unclonable.
With this patch we're finally able to abort worker-thread parsing of the `OperatorList`, rather than *only* aborting the main-thread rendering itself, when the `RenderTask.cancel` method is being called.
This will help improve perceived performance in the default viewer, especially when reading longer and more complex documents, since pages that've been scrolled out-of-view (and thus evicted from the cache) will no longer compete for parsing resources on the worker-thread.
*Please note:* With the implementation in this patch we're *not* aborting worker-thread parsing immediately on `RenderTask.cancel`, since that would lead to *worse* performance in many cases. For example: When zoom/rotation occurs in the viewer, while parsing/rendering is still ongoing, a `cancel` call will usually be (almost) immediately folled by a new `PDFPageProxy.render` call. In that case you obviously don't want to abort parsing on the worker-thread, since that would risk throwing away a partially parsed `OperatorList` and thus force unnecessary re-parsing which will regress perceived performance (especially for more complex documents).
When choosing a reasonable delay, before cancelling `getOperatorList` on the worker-thread when `RenderTask.cancel` is called, two different positions need to be considered:
1. The delay needs to be short enough, since a timeout in the multiple seconds range would essentially make this entire functionality meaningless (by always allowing most/all pages enough time to finish parsing).
2. The delay cannot be *too* short, since that would actually *reduce* performance in the zoom/rotation case outlined above. Furthermore, the time between `RenderTask.cancel` and `PDFPageProxy.render` calls will obviously be affected by both general computer performance and current CPU load.
It's certainly possible that the timeout may require some further tweaks, however the value settled on in this patch was easily *one order* of magnitude larger than the delta between cancel/render in my tests.
With the changes made in PR 11069, it's no longer necessary to include the `pageIndex`/`intent` parameters when sending 'GetOperatorList' data. In the previous implementation these properties were used to associate the `OperatorList` with the correct `RenderTask`, however now that `ReadableStream`s are used that's handled automatically and it's thus dead code at this point.
By transfering, rather than copying, `ArrayBuffer`s between the main- and worker-threads, you can avoid unnecessary allocations by only having *one* copy of the same data.
Hence manually setting `postMessageTransfers: false`, when calling `getDocument`, is a performance footgun[1] which will do nothing but waste memory.
Given that every reasonably modern browser supports `postMessage` transfers[2], I really don't see why it should be possible to force-disable this functionality.
Looking at the browser support, for `postMessage` transfers[2], it's highly unlikely that PDF.js is even usable in browsers without it. However, the feature testing of `postMessage` transfers is kept for the time being just to err on the safe side.
---
[1] This is somewhat similar to the, now removed, `disableWorker` parameter which also provided API users a much too simple way of reducing performance.
[2] See e.g. https://developer.mozilla.org/en-US/docs/Web/API/MessagePort/postMessage#Browser_compatibility and https://developer.mozilla.org/en-US/docs/Web/API/Transferable#Browser_compatibility
Note how the sent values have inconsistent types, with a boolean in one case and an object in the other (normal) case.
Furthermore, explicitly sending a `supportTypedArray: true` property seems superfluous at least to me.
It recently occurred to me that the CMap data should be an excellent candidate for transfering.
This will help reduce peak memory usage for PDF documents using CMaps, since transfering of data avoids duplicating it on both the main- and worker-threads.
Unfortunately it's not possible to actually transfer data when *returning* data through `sendWithPromise`, and another solution had to be used.
Initially I looked at using one message for requesting the data, and another message for returning the actual CMap data. While that should have worked, it would have meant adding a lot more complexity particularly on the worker-thread.
Hence the simplest solution, at least in my opinion, is to utilize `sendWithStream` since that makes it *really* easy to transfer the CMap data. (This required PR 11115 to land first, since otherwise CMap fetch errors won't propagate correctly to the worker-thread.)
Please note that the patch *purposely* only changes the API to Worker communication, and not the API *itself* since changing the interface of `CMapReaderFactory` would be a breaking change.
Furthermore, given the relatively small size of the `.bcmap` files (the largest one is smaller than the default range-request size) streaming doesn't really seem necessary either.
At this point in time it's easy to convert the `MessageHandler.on` call-sites to use arrow functions, and thus let the JavaScript engine handle scopes for us, rather than having to manually keep references to the relevant scopes in `MessageHandler`.[1]
An additional benefit of this is that a couple of `Function.prototype.call()` instances can now be converted into "normal" function calls, which should be a tiny bit more efficient.
All in all, I don't see any compelling reason why it'd be necessary to keep supporting custom `scope`s in the `MessageHandler` implementation.
---
[1] In the event that a custom scope is ever needed, simply using `bind` on the handler function when calling `MessageHandler.on` ought to work as well.
*Please note:* The majority of this patch was written by Yury, and it's simply been rebased and slightly extended to prevent issues when dealing with `RenderingCancelledException`.
By leveraging streams this (finally) provides a simple way in which parsing can be aborted on the worker-thread, which will ultimately help save resources.
With this patch worker-thread parsing will *only* be aborted when the document is destroyed, and not when rendering is cancelled. There's a couple of reasons for this:
- The API currently expects the *entire* OperatorList to be extracted, or an Error to occur, once it's been started. Hence additional re-factoring/re-writing of the API code will be necessary to properly support cancelling and re-starting of OperatorList parsing in cases where the `lastChunk` hasn't yet been seen.
- Even with the above addressed, immediately cancelling when encountering a `RenderingCancelledException` will lead to worse performance in e.g. the default viewer. When zooming and/or rotation of the document occurs it's very likely that `cancel` will be (almost) immediately followed by a new `render` call. In that case you'd obviously *not* want to abort parsing on the worker-thread, since then you'd risk throwing away a partially parsed Page and thus be forced to re-parse it again which will regress perceived performance.
- This patch is already *somewhat* risky, given that it touches fundamentally important/critical code, and trying to keep it somewhat small should hopefully reduce the risk of regressions (and simplify reviewing as well).
Time permitting, once this has landed and been in Nightly for awhile, I'll try to work on the remaining points outlined above.
Co-Authored-By: Yury Delendik <ydelendik@mozilla.com>
Co-Authored-By: Jonas Jenwald <jonas.jenwald@gmail.com>
With the changes to the `StreamType`/`FontType` "enums" in PR 11029, one unfortunate result is that `getStats` now *always* returns empty Arrays. Something that everyone, myself included, apparently missed is that you obviously cannot index an Array with Strings :-)
I wrongly assumed that the unit-tests would catch any bugs, but they apparently suffered from the same issue as the code in `src/core/`.
Another possible option could perhaps be to use `Set`s, rather than objects, but that will require larger changes since `LoopbackPort` (in `src/display/api.js`) doesn't support them.
There's a number of spots in the current code, and tests, where `cancel` methods are not called with appropriate arguments (leading to Promises not being rejected with Errors as intended).
In some cases the cancel `reason` is implicitly set to `undefined`, and in others the cancel `reason` is just a plain String. To address this inconsistency, the patch changes things such that cancelling is done with `AbortException`s everywhere instead.
Note that, in the old code, there was a code-path which could prevent this from happening thus affecting future cleanup.
Furthermore, ensure that we'll always attempt to cleanup when handling the 'PageError' message, similar to the code in e.g. the `PDFPageProxy._renderPageChunk` method.
The `receivingOperatorList` property is currently tracked *twice* in the rendering code, both directly and inversely through the `intentState.operatorList.lastChunk` boolean. This type of double bookkeeping is never a good idea, since it's just too easy for the properties to accidentally fall out of sync.
In this case there's even a `cleanup`-related bug caused by this, which means that `PDFPageProxy._tryCleanup` will never be able to discard any data if there's an error on the worker-thread (as handled through the 'PageError' message).
Hence the simplest solution seems, at least to me, to update `PDFPageProxy._tryCleanup` to replace the `intentState.receivingOperatorList` check with a `!intentState.operatorList.lastChunk` check and completely remove the former property.
Given that `cleanupAfterRender` is already set for large images, when handling 'obj' messages, this patch *should* thus be safe in general (since otherwise there ought be existing bugs related to cleanup and printing).
Calling `someArray = []` will create a new Array, which seems completely unnecessary when it's sufficient to just call `someArray.length = 0` to achieve the same effect.
Even though I cannot imagine these particular cases having any noticeable performance impact, similar changes were made in `core/` code years ago since it's apparently more efficient memory wise.
Please see the specification, https://www.adobe.com/content/dam/acom/en/devnet/acrobat/pdfs/PDF32000_2008.pdf#M11.9.12864.1Heading.71.Viewer.Preferences
Furthermore, note that this patch *only* adds API support and unit-tests but does not attempt to integrate e.g. the `ViewerPreferences -> Direction` property into the viewer (which would be necessary to address issue 10736).
The reason for this is that it's not entirely clear to me exactly if/how that could be implemented; e.g. would it be as simple as setting the `dir` attribute on the `viewerContainer` DOM element, or will it be more complicated?
There's also the question of how the `ViewerPreferences -> Direction` value interacts with the `PageMode`, and this will generally require a fair bit of manual testing. Since the direction of the *entire* viewer depends on the browser locale, there's also a somewhat open question regarding what default value to use for different locales.
Finally, if the viewer supports `ViewerPreferences -> Direction` then I'm assuming that it will be necessary to allow users to override the default value, which will require (most likely) new `SecondaryToolbar` buttons and icons for those etc.
Hence this patch only lays the necessary foundation for eventually addressing issue 10736, but defers the actual implementation until later. (Time permitting, I'll try to look into the viewer part later.)
*Please note:* This patch purposely ignores `src/display/network.js`, since its support for progressive reading depends on the non-standard `moz-chunked-arraybuffer` responseType which is currently in the process of being removed.
With PR 10675 having fixed the completely broken `disableRange=true` setting in the Firefox version of PDF.js, I couldn't help but noticing that loading progress is never reported properly in that case.
Currently loading progress is only reported for the `rangeProgress` chrome-event, which obviously isn't dispatched with `disableRange=true` set. However, the `progressiveRead` chrome-event includes loading progress as well, but this information isn't being used in any way.
Furthermore, the `PDFDataRangeTransport.onDataProgress` method wasn't able to handle "complete" loading information, and neither was `PDFDataTransportStream._onProgress` since that method would only ever attempt to report it through a RangeReader (which won't exist when `disableRange=true` is set).
Note how at https://mozilla.github.io/pdf.js/api/ it's being described as API docs, however `src/core/annotation.js` is not part of the public API.
Furthermore, given that the code residing in the `src/core/` folder is run in a worker-thread, it's not even accessible on the main-thread (since `postMessage` is being used to transfer the data).
Hence the different API methods simply returns a "proxy" to the underlying data, but not actually the same objects and data structures as in the worker-thread itself; thus it doesn't make a whole lot of sense to expose this in API docs as far as I'm concerned.
Finally, the patch fixes a small JSDoc related typo in `src/display/api.js` when referring to the `TextStyle` typedef.
Currently if trying to set `disableRange=true` in the built-in PDF Viewer in Firefox, either through `about:config` or via the URL hash, the PDF document will never load. It appears that this has been broken for a couple of years, without anyone noticing.
Obviously it's not a good idea to set `disableRange=true`, however it seems that this bug affects the PDF Viewer in Firefox even with default settings:
- In the case where `initialData` already contains the *entire* file, we're forced to dispatch a range request to re-fetch already available data just so that file loading may complete.
- (In the case where the data arrives, via streaming, before being specifically requested through `requestDataRange`, we're also forced to re-fetch data unnecessarily.) *This part was removed, to reduce the scope/risk of the patch somewhat.*
In the cases outlined above, we're having to re-fetch already available data thus potentially delaying loading/rendering of PDF files in Firefox (and wasting resources in the process).
Natively supported JPEG images are sent as-is, using a `blob:` or possibly a `data` URL, to the main-thread for loading/decoding.
However there's currently no attempt at releasing these resources, which are held alive by `blob:` URLs, which seems unfortunately given that images can be arbitrarily large.
As mentioned in https://developer.mozilla.org/en-US/docs/Web/API/URL/createObjectURL the lifetime of these URLs are tied to the document, hence they are not being removed when a page is cleaned-up/destroyed (e.g. when being removed from the `PDFPageViewBuffer` in the viewer).
This is easy to test with the help of `about:memory` (in Firefox), which clearly shows the number of `blob:` URLs becomming arbitrarily large *without* this patch. With this patch however the `blob:` URLs are immediately release upon clean-up as expected, and the memory consumption should thus be considerably reduced for long documents with (simple) JPEG images.
Note how `PDFDocumentProxy.destroy` is a nothing more than an alias for `PDFDocumentLoadingTask.destroy`. While removing the latter method would be a breaking API change, there's still room for at least some clean-up here.
The main changes in this patch are:
- Stop providing a `PDFDocumentLoadingTask` instance *separately* when creating a `PDFDocumentProxy`, since the loadingTask is already available through the `WorkerTransport` instance.
- Stop tracking the `PDFDocumentProxy` instance on the `WorkerTransport`, since that property is completely unused.
- Simplify the 'Multiple `getDocument` instances' unit-tests by only destroying *once*, rather than twice, for each document.
Given that the function is (purposely) independent of the verbosity level and that its message is worded to only apply on the main-thread, there's no reason to duplicate this across the built `pdf.js`/`pdf.worker.js` files.
Currently for every single parsed/rendered page there's no less than *four* `Date.now()` calls being made on the worker-side. This seems totally unnecessary, since the result of these calls are, by default, not used for anything *unless* the verbosity level is set to `INFO`.
This file (currently) contains not only DOM-specific helper functions/classes, but is used generally for various helper code relevant for main-thread functionality.
After PR 9340 all glyphs are now re-mapped to a Private Use Area (PUA) which means that if a font fails to load, for whatever reason[1], all glyphs in the font will now render as Unicode glyph outlines.
This obviously doesn't look good, to say the least, and might be seen as a "regression" since previously many glyphs were left in their original positions which provided a slightly better fallback[2].
Hence this patch, which implements a *general* fallback to the PDF.js built-in font renderer for fonts that fail to load (i.e. are rejected by the sanitizer). One caveat here is that this only works for the Font Loading API, since it's easy to handle errors in that case[3].
The solution implemented in this patch does *not* in any way delay the loading of valid fonts, which was the problem with my previous attempt at a solution, and will only require a bit of extra work/waiting for those fonts that actually fail to load.
*Please note:* This patch doesn't fix any of the underlying PDF.js font conversion bugs that's responsible for creating corrupt font files, however it does *improve* rendering in a number of cases; refer to this possibly incomplete list:
[Bug 1524888](https://bugzilla.mozilla.org/show_bug.cgi?id=1524888)
Issue 10175
Issue 10232
---
[1] Usually because the PDF.js font conversion code wasn't able to parse the font file correctly.
[2] Glyphs fell back to some default font, which while not accurate was more useful than the current state.
[3] Furthermore I'm not sure how to implement this generally, assuming that's even possible, and don't really have time/interest to look into it either.
- The only existing call-site, of this method, is never passing more than *one* font at a time anyway.
- As far as I can remember, this functionality has never actually been used (caveat: I didn't check the git history).
- This allows simplification of the method, especially by making use of the fact that it's now asynchronous.
- It should be just as easy to call `BaseFontLoader.bind` from within a loop, rather than having the loop in the method itself.
Currently all fonts are using the `_queueLoadingCallback` method to determine when they have been loaded[1]. However in most cases this is just adding unnecessary overhead, especially with `BaseFontLoader.bind` now being asynchronous, given how fonts are loaded:
- For fonts loaded using the Font Loading API, it's already possible to easily tell when a font has been loaded simply by checking the `loaded` promise on the FontFace object itself.
- For browsers, e.g. Firefox, which support synchronous font loading it's already assumed that fonts are immediately available.
Hence the `_queueLoadingCallback` method is moved into the `GenericFontLoader`, such that it's only utilized for fonts which are loaded using CSS.
---
[1] In the "fonts loaded using CSS" case, this is already a hack anyway as outlined in the comments.
This polyfill is currently used in only *one* file, i.e. `src/display/api.js`, and only when trying to build a *fallback* `workerSrc` path.
Given that the global `workerSrc` should *always* be set[1] when using the PDF.js library[2], and that the fallback `workerSrc` should only be regarded as a best-effort solution anyway, there isn't a particularily strong reason to keep the compatibility code in my opinion.
---
[1] Other supported options include setting the global `workerPort`, or passing in a `PDFWorker` instance as part of the `getDocument` call.
[2] Which is clearly mentioned in the JSDocs in `src/display/worker_options.js`.
This piggybacks of the existing `cancel` functionality, to ensure that any pending operations are closed *and* that any temporary canvases are actually being removed.
Also simplifies `finishPaintTask` in `PDFPageView.draw` slightly, by converting it to an async function.
If, as PR 10368 suggests, more parameters should be added to `getViewport` I think that it would be a mistake to not change the signature *first* to avoid needlessly unwieldy call-sites.
To not break any existing code and third-party use-cases, this is obviously implemented with a deprecation warning *and* with a working fallback[1] for the old method signature.
---
[1] This is limited to `GENERIC` builds, which should be sufficient.
Note that the OpenAction dictionary may contain other information besides just a destination array, e.g. instructions for auto-printing[1].
Given first of all that an arbitrary `Dict` cannot be sent from the Worker (since cloning would fail), and second of all that the data obviously needs to be validated, this patch purposely only adds support for fetching a destination from the OpenAction entry[2].
---
[1] This information is, currently in PDF.js, being included through the `getJavaScript` API method.
[2] This significantly reduces the complexity of the implementation, which seems fine for now. If there's ever need for other kinds of OpenAction to be fetched, additional API methods could/should be implemented as necessary (could e.g. follow the `getOpenActionWhatever` naming scheme).
This changes all occurrences of `var` to `let`/`const` in this code, and updates the signature of the constructor to use object destructuring for better readability (and self documentation).
Also, `useRequestAnimationFrame` is changed to a parameter and the `typeof window` check is now done *once* rather than at every `_scheduleNext` call.
This changes all occurrences of `var` to `let`/`const` in this code, and updates the signatures of a couple of methods to use object destructuring.
Finally, when creating `InternalRenderTask` instances *only* the necessary parameter are now provided, since passing through the `RenderParameters` as-is seems completely unnecessary.
First of all, note how there's currently *two* methods for checking if a certain object exists, which seems completely unwarranted.
Furthermore, the rarely used `getData` method was removed and its only callsite changed to use a combination of `PDFObjects.{has, get}` instead.
Finally, the methods were rearranged slightly, to bring the most important ones (for an API user) to the top of the class.
Note how nowhere in the code `canvasInRendering.get()` is ever called, and that this structure is really only used to store references to `<canvas>` DOM elements.
The reason for this being a `WeakMap` is probably because at the time we weren't using `core-js` polyfills yet, and since there already existed a manually implemented `WeakMap` polyfill it was probably simpler to use that.
Please note that, given the lack of a runnable example, I'm not totally sure if this first of all is enough to *completely* address the issue as filed and second of all if we actually want this new behaviour.
*Please note:* I'm totally fine with this patch being rejected, and the issue closed as WONTFIX; however these changes should address the issue if that's desired.
From a conceptual point of view, reporting loading progress doesn't really make a lot of sense for PDF files opened by passing raw binary data directly to `getDocument` (since obviously *all* data was loaded).
This is compared to PDF files loaded via e.g. `XMLHttpRequest` or the Fetch API, where the entire PDF file isn't available from the start and knowing the loading progress makes total sense.
However I can certainly see why the current API could be considered inconsistent, which isn't great, since a registered `onProgress` callback will never be called for certain `getDocument` calls.
The simplest solution to this inconsistency thus seem to be to ensure that `onProgress` is always called when handling the `DataLoaded` message, since that will *always* be dispatched[1] from the worker-thread.
---
[1] Note that this isn't guaranteed to happen, since setting `disableAutoFetch = true` often prevents the *entire* file from ever loading. However, this isn't relevant for the issue at hand, and is a well-known consequence of using `disableAutoFetch = true`; note how the default viewer even has a specialized code-path for hiding the loadingBar.
*This should have been part of PR 10139.*
In the event that a user has attempted to manually load the worker file on the main-thread, but somehow failed to do that correctly, there's a possibility that `getMainThreadWorkerMessageHandler` could throw. Considering how/where that helper function is being called, an error could still prevent `PDFDocumentLoadingTask` from completing (regardless if it's being resolved/rejected).
With the way that the `getWorkerSrc()` helper function is implemented now, there's no longer a particularly strong reason for keeping the global `pdfjsFilePath` variable around.
With this patch the fallback `workerSrc` will thus, assuming is wasn't already set, be set to the "pdfjsFilePath" which simplifies the `getWorkerSrc()` function and reduces the amount of global state.
Finally, the global `workerSrc` variable was renamed to prevent shadowing.
This should, hopefully, cover all the possible ways[1] in which "fake workers" are loaded. Given the different code-paths, adding unit-tests might not be that simple.
Note that in order to make this work, the various `fakeWorkerFilesLoader` functions were converted to return `Promises`.
---
[1] Unfortunately there's lots of them, for various build targets and configurations.
This moves/exposes the `URL` polyfill similarily to the existing `ReadableStream` polyfill, rather than exposing it globally, to avoid interfering with any "outside" code.
Both the `URL` and `ReadableStream` polyfills are now exposed on the `pdfjsLib` object, such that they are accessible to the viewer components.
Furthermore, the `no-restricted-globals` ESLint rule is also enabled to prevent accidental usage of the native `URL`/`ReadableStream` implementations directly in the `src/` and `web/` folders; see also https://eslint.org/docs/rules/no-restricted-globals
Addresses the remaining TODO in https://github.com/mozilla/pdf.js/projects/6
Currently if `RenderTask.cancel` is called *immediately* after rendering was started, then by the time that `InternalRenderTask.initializeGraphics` is called rendering will already have been cancelled.
However, we're still inserting the canvas into the `canvasInRendering` map, thus breaking any future attempts at re-rendering using the same canvas. Considering that `InternalRenderTask.cancel` always removes the canvas from the map, I cannot imagine that we'd ever want to re-add it *after* rendering was cancelled (it was likely just a simple oversight in PR 8519).
Fixes 9456.
This wasn't included in PR 9245, since all the API options were still global at that time.
Writing the unit-tests also uncovered an issue with `getOperatorList` not starting the "Page Request" timer.
Obviously it's still not possible to render non-embedded fonts as paths, but in this way the rest of the page will at least be allowed to continue rendering.
*Please note:* Including the 14 standard fonts in PDF.js probably wouldn't be *that* difficult to implement. (I'm not a lawyer, but the fonts from PDFium could probably be used given their BSD license.)
However, the main blocker ought to be the total size of the necessary font data, since I cannot imagine people being OK with shipping ~5 MB of (additional) font data with Firefox. (Based on the reactions when the CMap files were added, and those are only ~1 MB in size.)
The built-in image decoders are already using `Uint8ClampedArray` when returning data, and this patch simply extends that to the rest of the image/colorspace code.
As far as I can tell, the only reason for using manual clamping/rounding in the first place was because TypedArrays used to be polyfilled (using regular arrays). And trying to polyfill the native clamping/rounding would probably have been had too much overhead, but given that TypedArray support is required in PDF.js version `2.0` that's no longer a concern.
*Please note:* Because of different rounding behaviour, basically `Math.round` in `Uint8ClampedArray` respectively `Math.floor` in the old code, there will be very slight movement in quite a few existing test-cases. However, the changes should be imperceivable to the naked eye, given that the absolute difference is *at most* `1` for each RGB component when comparing `master` and this patch (see also the updated expectation values in the unit-tests).
Not only is the `Util.loadScript` helper function unused on the Worker side, even trying to use it there would throw an Error (since `document` isn't defined/available in Workers).
Hence this helper function is moved, and its code modernized slightly by having it return a Promise rather than needing a callback function.
Finally, to reduced code duplication, the "new" loadScript function is exported and used in the viewer.
This special handling was added in PR 8567, but was made redundant in PR 8721 which stopped sending everything but the kitchen sink to the Worker side.
Since `PDFPageProxy` already provide getters for all the data returned by `GetPage` (in the Worker), there isn't any compelling reason for accessing the `pageInfo` directly on `PDFPageProxy`.
The patch also changes the `GetPage` handler, in `src/core/worker.js`, to use modern JavaScript features.
Since `PDFDocumentProxy` already provide getters for all the data returned by `GetDoc` (in the Worker), there isn't any compelling reason for accessing the `pdfInfo` directly on `PDFDocumentProxy`.
After PR 8617 the `PDFManagerReady` message handler function, in `src/display/api.js`, is now a no-op. Hence it seems completely unnecessary to keep sending this message from `src/core/worker.js`.
With native typed array support now being mandatory in PDF.js, since version 2.0, this probably isn't a huge problem even though the current code seems wrong (it was changed in PR 6571).
Note how in the `!(data instanceof Uint8Array)` case we're currently attempting to send `handler.send('test', 'main', false);` to the main-thread, which doesn't really make any sense since the signature of the method reads `send(actionName, data, transfers) {`.
Hence the data that's *actually* being sent here is `'main'`, with `false` as the transferList, which just seems weird. On the main-thread, this means that we're in this case checking `data && data.supportTypedArray`, where `data` contains the string `'main'` rather than being falsy. Since a string doesn't have a `supportTypedArray` property, that check still fails as expected but it doesn't seem great nonetheless.
Since all the built-in PDF.js image decoders now return their data as `Uint8ClampedArray`, for consistency `JpegDecode` on the main-thread should be doing the same thing; follow-up to PR 8778.
The signature of the `PDFWorker.fromPort` method, in addition to the `PDFWorker` constructor, was changed in PR 9480.
Hence it's probably a good idea to add a bit more validation to `PDFWorker.fromPort`, to ensure that it won't fail silently for an API consumer that updates to version 2.0 of the PDF.js library.
With version 2.0, native support for typed arrays is now a requirement for using the PDF.js library; see PR 9094 where the old polyfills were removed.
Hence the `isTypedArraysPresent` check, when setting up fake workers, no longer serves any purpose here and can thus be removed.
There's no good reason, as far as I can tell, to duplicate the functionality of the `LoopbackPort` in the unit-tests. The only difference between the implementations is that `LoopbackPort` mimics the (native) structured cloning, however that shouldn't matter here since the tests are only sending "simple" data (strings respectively arrays with numbers).
Furthermore the patch also changes `LoopbackPort` to default to using "structured cloning" and deferred invocation of the listeners, since native typed array support is now a requirement for using the PDF.js library.
The `MessageHandler` itself, and its assorted helper functions, are currently the single largest[1] piece of code in the `src/shared/util.js` file. By moving this code into its own file, `src/shared/util.js` thus becomes smaller and more manageable.
Please note that while the current code works, both in the viewer and the unit-tests, it can leave the `WorkerTransport._passwordCapability` Promise in a pending state.
In the `PasswordRequest` handler, in src/display/api.js, we're returning the Promise from a `capability` object (rather than just a "plain" Promise). While an error thrown anywhere within this handler was fortunately enough to propagate it to the Worker side, it won't cause the Promise (in `WorkerTransport._passwordCapability`) to actually be rejected.
Finally note that while we're now catching errors in the `PasswordRequest` handler, those errors are still propagated to the Worker side via the (now) rejected Promise and the existing `return this._passwordCapability.promise;` line.
This prevents warnings about uncaught Promises, with messages such as "Error: Worker was destroyed during onPassword callback", when running the unit-tests both in browsers *and* in Node.js/Travis.
This should provide a better out-of-the-box experience when using PDF.js in a Node.js environment, since it's missing native support for both `@font-face` and `Image`.
Please note that this change *only* affects the default values, hence it's still possible for an API consumer to override those values when calling `getDocument`.
Also, prevents "ReferenceError: document is not defined" errors, when running the unit-tests in Node.js/Travis.
*This is a final piece of clean-up of code that I recently wrote, after which I'm done :-)*
When the `getMainThreadWorkerMessageHandler` function was added, in PR 9385, it did so by basically introducing a `web/app.js` dependency in `src/display/api.js` through the `window.pdfjsNonProductionPdfWorker` property[1]. Even though this is limited to non-`PRODUCTION` mode, i.e. `gulp server`, it still seems unfortunate to have that sort of viewer dependency in the API code itself.
With the new, much nicer and shorter, names introduced in PR 9565 we can remove this non-`PRODUCTION` hack and just use `window.pdfjsWorker` in both the viewer and the API regardless of the build mode.
---
[1] It didn't seem correct to piggy-back on the `window.pdfjsDistBuildPdfWorker` property in non-`PRODUCTION` mode.
The `getPageSizeInches` method was implemented on `PDFDocumentProxy`, which seems conceptually wrong since the size property isn't global to the document but rather specific to each page. Hence the method is moved into `PDFPageProxy`, as `get pageSizeInches` instead to address this.
Despite the fact that new API functionality was implemented, no unit-tests were added. To prevent issues later on, we should *always* ensure that new functionality has at least some test-coverage; something that this patch also takes care of.
The new `PDFDocumentProperties._parsePageSize` method seemed unnecessary convoluted. Furthermore, in the "no data provided"-case it even returned incorrect data (an array, rather than the expected object).
Finally, the fallback strings didn't actually agree with the `en-US` locale. This inconsistency doesn't look too great, and it's thus addressed here as well.
With options being moved from the global `PDFJS` object and into `getDocument`, a side-effect is that we're now passing in a fair number of useless parameters to the various transport/network streams.
Even though this doesn't *currently* cause any problems, it nonetheless seem like a good idea to explicitly provide the parameters that are actually necessary.
One additional complication with removing this option from the global `PDFJS` object, is that the viewer currently needs to check `disableAutoFetch` in a couple of places. To address this I'm thus proposing adding a getter in `PDFDocumentProxy`, to allow checking the *actually* used values for a particular `getDocument` invocation.
In order to simplify things, the undocumented `enableStats` option was removed and `pdfBug` is now instead used to enabled general debugging *and* page request/rendering stats.
Considering that in the default viewer the `stats` was only used when debugging was also enabled, this simplification (code wise) definitely seem worthwhile to me.
Fallback to the built-in JPEG decoder when browser decoding fails, and attempt to handle JPEG images with DNL (Define Number of Lines) markers (issue 8614)
This works by making `PartialEvaluator.buildPaintImageXObject` wait for the success/failure of `loadJpegStream` on the API side *before* parsing continues.
Please note that in practice, it should be quite rare for the browser to fail loading/decoding of a JPEG image. In the general case, it should thus not be completely surprising if even `src/core/jpg.js` will fail to decode the image.
Since `loadJpegStream` is only used at a *single* spot in the code-base, and given that it's very heavily tailored to the calling code (since it relies on the data structure of `PDFObjects`), this patch simply inlines the code in `src/display/api.js` instead.
Despite this patch removing the `disableWorker` option itself, please note that we'll still fallback to loading the worker file(s) on the main-thread when running in environments without proper Web Worker support.
Furthermore it's still possible, even with this patch, to force the use of fake workers by manually loading the necessary file using a `<script>` tag on the main-thread.[1]
That way, the functionality of the now removed `SINGLE_FILE` build target and the resulting `build/pdf.combined.js` file can still be achieved simply by adding e.g. `<script src="build/pdf.worker.js"></script>` to the HTML (obviously with the path adjusted as needed).
Finally note that the `disableWorker` option is a performance footgun, and unfortunately many existing third-party examples actually use it without providing any sort of warning/justification.
---
[1] This approach is used in the default viewer, since certain kind of debugging may be easier if the code is running directly on the main-thread.
This method returns the currently used `workerSrc`, which thus allows obtaining the fallback `workerSrc` value (e.g. when the option wasn't set by the user).
Please note that this build target, and the resulting `build/pdf.combined.js` file, is equivalent to setting the `PDFJS.disableWorker` option to `true` which is a performance footgun.
It turns out that PR 9245 unfortunately broke benchmarking completely, sorry about that!
The bug is that we were attempting to reset the current instance of `StatTimer`, instead of creating a new one as was previously done. By resetting the current instance, the `StatTimer` data fetched in `test/driver.js` is now wiped out since it points to the *same* underlying object.
This re-use of a `StatTimer` instance was asked for during review, and unfortunately I didn't test this thoroughly enough before submitting the final version of the PR.[1]
---
[1] Note that while I did test the benchmarking scripts with that PR *before* initially submitting it, I did however forget to do that after addressing the review comments which might explain why this problem went unnoticed.
This patch updates the `IPDFStreamReader` interface and ensures that the interface/implementation of `network.js`, `fetch_stream.js`, `node_stream.js`, and `transport_stream.js` all match properly.
The unit-tests are also adjusted, to more closely replicate the actual behaviour of the various actual `IPDFStreamReader` implementations.
Finally, this patch adjusts the use of the Content-Disposition filename when setting the title in the viewer, and adds `PDFDocumentProperties` support as well.
The `fetch` API is only supported for http(s), even in Chrome extensions.
Because of this limitation, we should use the XMLHttpRequest API when the
requested URL is not a http(s) URL.
Fixes#9361
I recall being confused as to the purpose of the `encrypted` property all the way back when working on PR 4750.
Looking at the history, this property was added in PR 1698 when password support was added to the API/viewer. However, its only purpose seem to have been to facilitate the addition of a `isEncrypted` function in the API. That function never, as far as I can tell, saw any use and was unceremoniously removed in PR 4144.
Since we want to avoid sending all non-essential data early during initial document loading (e.g. PR 4750), it seems correct to get rid of the `encrypted` property. Especially since it hasn't even been exposed in the API for over three years, with no complaints that I'm aware of.
Finally note that the `encrypt` property on the `XRef` instance isn't tied to the code that's being removed here. Given that we're calling `PDFDocument.parse` during `createDocumentHandler` in the worker which, via `PDFDocument.setup`, calls `XRef.parse` where the `Encrypt` data (if it exists) is always parsed.
Unless the debugging tools (i.e. `PDFBug`) are enabled, or the `browsertest` is running, the `PDFPageProxy.stats` aren't actually used for anything.
Rather than initializing unnecessary `StatTimer` instances, we can simply re-use *one* dummy class (with static methods) for every page. Note that by using a dummy `StatTimer` in this way, rather than letting `PDFPageProxy.stats` be undefined, we don't need to guard *every* single stats collection callsite.
Since it wouldn't make much sense to attempt to use `PDFPageProxy.stats` when stat collection is disabled, it was instead changed to a "private" property (i.e. `PDFPageProxy._stats`) and a getter was added for accessing `PDFPageProxy.stats`. This getter will now return `null` when stat collection is disabled, making that case easy to handle.
For benchmarking purposes, the test-suite used to re-create the `StatTimer` after loading/rendering each page. However, modifying properties on various API code from the outside in this way seems very error-prone, and is an anti-pattern that we really should avoid at all cost. Hence the `PDFPageProxy.cleanup` method was modified to accept an optional parameter, which will take care of resetting `this.stats` when necessary, and `test/driver.js` was updated accordingly.
Finally, a tiny bit more validation was added on the viewer side, to ensure that all the code we're attempting to access is defined when handling `PDFPageProxy` stats.
*This patch is the result of me starting to look into moving parameters from `PDFJS` into `getDocument` and other API methods.*
When familiarizing myself with the code, the signatures of the various network streams seemed to be unnecessarily cumbersome since `disableRange` is currently handled separately from other parameters.
I'm assuming that the explanation for this is probably "for historical reasons", as is often the case. Hence I'd like to clean this up *before* we start the larger, and more invasive, `PDFJS` parameter re-factoring.
I don't have a good example at hand right know, but I recall seeing custom deployments of PDF.js that bundle a *specific* version of the `build/pdf.js` file and then set `PDFJS.workerSrc` to point to https://mozilla.github.io/pdf.js/build/pdf.worker.js.
That practice seems really bad since, besides (obviously) causing unnecessary server load, it will very quickly result in a version mismatch between the `pdf.js` and `pdf.worker.js` files in those PDF.js deployments.
Such a version mismatch could easily lead to either breaking errors, or even worse slightly inconsistent behaviour for an API call (if the API -> Worker interface changes, which does happen from time to time).
To avoid the problems described above, I'm thus proposing that we enforce that the versions of the `pdf.js` and `pdf.worker.js` files must always match.
Currently `PDFFunction` is implemented (basically) like a class with only `static` methods. Since it's used directly in a number of different `src/core/` files, attempting to pass in `isEvalSupported` would result in code that's *very* messy, not to mention difficult to maintain (since *every* single `PDFFunction` method call would need to include a `isEvalSupported` argument).
Rather than having to wait for a possible re-factoring of `PDFFunction` that would avoid the above problems by design, it probably makes sense to at least set `isEvalSupported` globally for `PDFFunction`.
Please note that there's one caveat with this solution: If `PDFJS.getDocument` is used to open multiple files simultaneously, with *different* `PDFJS.isEvalSupported` values set before each call, then the last one will always win.
However, that seems like enough of an edge-case that we shouldn't have to worry about it. Besides, since we'll also test that `eval` is actually supported, it should be fine.
Fixes 5573.
`__pdfjsdev_webpack__` was used to skip evaluating part of an AST,
in order to not mangle some `require` symbols.
This commit removes `__pdfjsdev_webpack__`, and:
- Uses `__non_webpack_require__` when one wants the output to
contain `require` instead of `__webpack_require__`.
- Adds options to the webpack config to prevent "polyfills" for
some Node.js-specific APIs to be added.
- Use `// eslint-disable-next-line no-undef` instead of `/* globals ... */`
for variables that are not meant to be used globally.
This patch adds Streams API support in getTextContent
so that we can stream data in chunks instead of fetching
whole data from worker thread to main thread. This patch
supports Streams API without changing the core functionality
of getTextContent.
Enqueue textContent directly at getTextContent in partialEvaluator.
Adds desiredSize and ready property in streamSink.
http://eslint.org/docs/rules/comma-danglehttp://eslint.org/docs/rules/object-curly-spacing
Given that we currently have quite inconsistent object formatting, fixing this in *one* big patch probably wouldn't be feasible (since I cannot imagine anyone wanting to review that); hence I've opted to try and do this piecewise instead.
Please note: This patch was created automatically, using the ESLint `--fix` command line option. In a couple of places this caused lines to become too long, and I've fixed those manually; please refer to the interdiff below for the only hand-edits in this patch.
```diff
diff --git a/src/display/canvas.js b/src/display/canvas.js
index 5739f6f2..4216b2d2 100644
--- a/src/display/canvas.js
+++ b/src/display/canvas.js
@@ -2071,7 +2071,7 @@ var CanvasGraphics = (function CanvasGraphicsClosure() {
var map = [];
for (var i = 0, ii = positions.length; i < ii; i += 2) {
map.push({ transform: [scaleX, 0, 0, scaleY, positions[i],
- positions[i + 1]], x: 0, y: 0, w: width, h: height, });
+ positions[i + 1]], x: 0, y: 0, w: width, h: height, });
}
this.paintInlineImageXObjectGroup(imgData, map);
},
diff --git a/src/display/svg.js b/src/display/svg.js
index 9eb05dfa..2aa21482 100644
--- a/src/display/svg.js
+++ b/src/display/svg.js
@@ -458,7 +458,11 @@ SVGGraphics = (function SVGGraphicsClosure() {
for (var x = 0; x < fnArrayLen; x++) {
var fnId = fnArray[x];
- opList.push({ 'fnId': fnId, 'fn': REVOPS[fnId], 'args': argsArray[x], });
+ opList.push({
+ 'fnId': fnId,
+ 'fn': REVOPS[fnId],
+ 'args': argsArray[x],
+ });
}
return opListToTree(opList);
},
```
Please see http://eslint.org/docs/rules/object-shorthand.
For the most part, these changes are of the search-and-replace kind, and the previously enabled `no-undef` rule should complement the tests in helping ensure that no stupid errors crept into to the patch.
[api-minor] Always allow e.g. rendering to continue even if there are errors, and add a `stopAtErrors` parameter to `getDocument` to opt-out of this behaviour (issue 6342, issue 3795, bug 1130815)
Other PDF readers, e.g. Adobe Reader and PDFium (in Chrome), will attempt to render as much of a page as possible even if there are errors present.
Currently we just bail as soon the first error is hit, which means that we'll usually not render anything in these cases and just display a blank page instead.
NOTE: This patch changes the default behaviour of the PDF.js API to always attempt to recover as much data as possible, even when encountering errors during e.g. `getOperatorList`/`getTextContent`, which thus improve our handling of corrupt PDF files and allow the default viewer to handle errors slightly more gracefully.
In the event that an API consumer wishes to use the old behaviour, where we stop parsing as soon as an error is encountered, the `stopAtErrors` parameter can be set at `getDocument`.
Fixes, inasmuch it's possible since the PDF files are corrupt, e.g. issue 6342, issue 3795, and [bug 1130815](https://bugzilla.mozilla.org/show_bug.cgi?id=1130815) (and probably others too).
- When the minified version is used the resolver of the worker can not find it properly and throws 404 error.
- The problem was that:
- It was getting the current name of the file.
- It was replacing **.js** by **.worker.js**
- When it was loading the unminified version it was working fine because:
- *pdf.js - .js + .worker.js* = **pdf.worker.js**
- When it was loading the minified version it didtn't work because:
- *pdf.min.js - .js + .worker.js* = **pdf.min.worker.js**
- **pdf.min.worker.js** doesn't exist the real file name is **pdf.worker.min.js**
This patch gets rid of the only case in the code-base where we're throwing a plain `string`, rather than an `Error`, which besides better/more consistent error handling also allows us to enable the [`no-throw-literal`](http://eslint.org/docs/rules/no-throw-literal) ESLint rule.
Currently the built-in CMap files are loaded in `src/core/cmap.js` using `XMLHttpRequest` directly. For some environments that might be a problem, hence this patch refactors that to instead use a factory to load built-in CMaps on the main thread and message the data to the worker thread.
This is inspired by other recent work, e.g. the addition of the `CanvasFactory`, and to a large extent on the IRC discussion starting at http://logs.glob.uno/?c=mozilla%23pdfjs&s=12+Oct+2016&e=12+Oct+2016#c53010.
Note that I initially tried to add this as a parameter to the `PDFPageProxy.render` method, such that it could be passed to `PartialEvaluator.getOperatorList`.
However, given all the different code-paths that call `getOperatorList` (there's a bunch only in `annotation.js`), this seemed to very quickly become unwieldy and thus difficult to maintain compared to simply using the existing `evaluatorOptions`.
Fixes extra canvas create calls.
Fixes unnecessary call of `new DOMCanvasFactory`.
Fixes undefined error of DOMCanvasFactory.
Fixes failures in some of the tests.
Fixes expected behaviour.
Remove unused vars.
Please see http://eslint.org/docs/rules/no-unused-vars; note that this patch purposely uses the same rule options as in `mozilla-central`, such that it fixes part of issue 7957.
It wasn't, in my opinion, entirely straightforward to enable this rule compared to the already existing rules. In many cases a `var descriptiveName = ...` format was used (more or less) to document the code, and I choose to place the old variable name in a trailing comment to not lose that information.
I welcome feedback on these changes, since it wasn't always entirely easy to know what changes made the most sense in every situation.
Using `else` after `return` is not necessary, and can often lead to unnecessarily cluttered code. By using the `no-else-return` rule in ESLint we can avoid this pattern, see http://eslint.org/docs/rules/no-else-return.
This patch also removes the `UpdatePassword` message, in favour of using the `sendWithPromise` method of `MessageHandler`.
Furthermore, the patch also refactors the `BasePdfManager_updatePassword`/`BasePdfManager_passwordChanged` methods (in pdf_manager.js), and the `pdfManagerReady` function (in worker.js).
*Please note that most of the necessary code adjustments were made in PR 7890.*
ESLint has a number of advantageous properties, compared to JSHint. Among those are:
- The ability to find subtle bugs, thanks to more rules (e.g. PR 7881).
- Much more customizable in general, and many rules allow fine-tuned behaviour rather than the just the on/off rules in JSHint.
- Many more rules that can help developers avoid bugs, and a lot of rules that can be used to enforce a consistent coding style. The latter should be particularily useful for new contributors (and reduce the amount of stylistic review comments necessary).
- The ability to easily specify exactly what rules to use/not to use, as opposed to JSHint which has a default set. *Note:* in future JSHint version some of the rules we depend on will be removed, according to warnings in http://jshint.com/docs/options/, so we wouldn't be able to update without losing lint coverage.
- More easily disable one, or more, rules temporarily. In JSHint this requires using a numeric code, which isn't very user friendly, whereas in ESLint the rule name is simply used instead.
By default there's no rules enabled in ESLint, but there are some default rule sets available. However, to prevent linting failures if we update ESLint in the future, it seemed easier to just explicitly specify what rules we want.
Obviously this makes the ESLint config file somewhat bigger than the old JSHint config file, but given how rarely that one has been updated over the years I don't think that matters too much.
I've tried, to the best of my ability, to ensure that we enable the same rules for ESLint that we had for JSHint. Furthermore, I've also enabled a number of rules that seemed to make sense, both to catch possible errors *and* various style guide violations.
Despite the ESLint README claiming that it's slower that JSHint, https://github.com/eslint/eslint#how-does-eslint-performance-compare-to-jshint, locally this patch actually reduces the runtime for `gulp` lint (by approximately 20-25%).
A couple of stylistic rules that would have been nice to enable, but where our code currently differs to much to make it feasible:
- `comma-dangle`, controls trailing commas in Objects and Arrays (among others).
- `object-curly-spacing`, controls spacing inside of Objects.
- `spaced-comment`, used to enforce spaces after `//` and `/*. (This is made difficult by the fact that there's still some usage of the old preprocessor left.)
Rules that I indend to look into possibly enabling in follow-ups, if it seems to make sense: `no-else-return`, `no-lonely-if`, `brace-style` with the `allowSingleLine` parameter removed.
Useful links:
- http://eslint.org/docs/user-guide/configuring
- http://eslint.org/docs/rules/
Note that in `FIREFOX/MOZCENTRAL/CHROME` builds of the standard viewer the `docBaseUrl` parameter will be set by default, since in that case it makes sense to use the current URL as a base.
For the `GENERIC` viewer, or the API itself, it doesn't make sense to try and set the `docBaseUrl` by default. However, custom deployments/implementations may still find the parameter useful.
If interactive forms are enabled, then the display layer takes care of
rendering the form elements. There is no need to draw them on the canvas
as well. This also leads to issues when values are prefilled, because
the text fields are transparent, so the contents that have been rendered
onto the canvas will be visible too.
We address this issue by passing the `renderInteractiveForms` parameter
to the render task and handling it when the page is rendered (i.e., when
the canvas is rendered).
In the case where the document was destroyed, we were rejecting the `Promise` in `JpegDecode` with a string instead of an `Error`. The patch also brings the wording more inline with other such rejections.
Use the `isInt` utility function when validating the `pageNumber` parameter in `WorkerTransport_getPage`, to make it more obvious what's actually happening. There's also a couple more unit-tests added, to ensure that we always fail in the expected way.
Finally, we can simplify the rejection handling in `WorkerTransport_getPageIndexByRef` somewhat. (Note that the only reason for using `catch` here is that since the promise is rejected on the worker side, the `reason` becomes a string instead of an `Error` which is why we "re-reject" on the display side.)
From the discussion in issue 7445, it seems that there may be cases where an API consumer would want to get the text content as is, without combined text items.
Currently the `getPageIndex` method will happily return `0`, even if the `Ref` parameter doesn't actually point to a proper /Page dictionary.
Having the API trust that the consumer is doing the right thing seems error-prone, hence this patch which adds a check for this case.
Given that the `Catalog_getPageIndex` method isn't used in any hot part of the codebase, this extra check shouldn't be a problem.
(Note: in the standard viewer, it is only ever used from `PDFLinkService_navigateTo` if a destination needs to be resolved during document loading, which isn't common enough to be an issue IMHO.)
This naming issue has been present since PR 3529, but at least I cannot find any issues/bugs that seem to have been caused by it, which is good.
The patch also removes an unnecessary `else` branch, since an already existing `break` means that it's redundant.
Fixes 7232.
Currently the `C` entry in an outline item is returned as is, which is neither particularly useful nor what the API documentation claims.
This patch also adds unit-tests for both the color handling, and the `F` entry (bold/italic flags).
Reverts "Hack to avoid intermidiate Chrome failures during tests."
(2b2c521213).
require.js uses importScript asynchronously, which activates the worker
GC bug in WebKit. This patch works around a bug in a way that is similar
in the upcoming (but not yet released) require.js 2.1.23
The advantage of the new work-around is that it allows the runtime to
garbage-collect idle Workers.
References:
- https://crbug.com/572225
- https://webkit.org/b/153317
Re: issue 5089.
(Note that since there are other outline features that we currently don't support, e.g. bold/italic text and custom colours, I thus think we can keep the referenced issue open.)
This patch goes a bit further than issue 6612 requires, and replaces all kinds of whitespace with standard spaces.
When testing this locally, it actually seemed to slightly improve two existing test-cases (`tracemonkey-text` and `taro-text`).
Fixes 6612.
This patch:
- Updates the JSDoc comment in `api.js`, to more clearly point out that `PDFJS.openExternalLinksInNewWindow` is deprecated, and explains what to use instead.
- Changes the `warn`, in `isExternalLinkTargetSet()`, to use the new `deprecated` function instead. Also updates the message with more detailed information about what to use instead.
- Changes the pre-processor tag to ensure the deprecation warning is seen in all build types where it could possibly matter (in case people are using `PDFJS.openExternalLinksInNewWindow` in e.g. custom-built extensions).
These changes were prompted by seeing http://stackoverflow.com/questions/33813373/pdf-js-how-to-open-hyperlinks-in-a-new-tab-window, since it seems to me that the current comments/warnings might not be worded well enough.
Currently `getAnnotations` will *only* fetch annotations that are either `viewable` or `printable`. This is "hidden" inside the `core.js` file, meaning that API consumers might be confused as to why they are not recieving *all* the annotations present for a page.
I thus think that the API should, by default, return *all* available annotations unless specifically told otherwise. In e.g. the default viewer, we obviously only want to display annotations that are `viewable`, hence this patch adds an `intent` parameter to `getAnnotations` that makes it possible to decide if only `viewable` or `printable` annotations should be fetched.
*Follow-up to PR 6546.*
If rendering has already started when the document is destroyed, then `this.pageCache[data.pageIndex]` may already have been cleared when the `StartRenderingPage`/`RenderPageChunk` messages are recieved in `api.js`, which results in `TypeError`s being thrown.
Replaces `PDFJS.openExternalLinksInNewWindow` with a more generic configuration option.
*Note:* `PDFJS.openExternalLinksInNewWindow = true;` is equal to `PDFJS.externalLinkTarget = PDFJS.LinkTarget.BLANK;`.
In some cases, such as in use with a CSP header, constructing a function with a
string of javascript is not allowed. However, compiling the various commands
that need to be done on the canvas element is faster than interpreting them.
This patch changes the font renderer to instead emit commands that are compiled
by the font loader. If, during compilation, we receive an EvalError, we instead
interpret them.
Instead of trying to hack around various browser defects, let's just disable PresentationMode in the affected browsers. This patch:
- Disables PresentationMode in IE11+ when the viewer is embedded; fixes 4711.
After PR 5263, setting `disableAutoFetch = true` in the generic viewer no longer works correctly, since the entire file loads even with `disableStream = true`.
Currently when an exception is thrown, we try to reject `workerReadyCapability` with multiple arguments in src/core/api.js. This obviously doesn't work, hence this patch changes that to instead reject with the exception object as is.
In src/core/worker.js the exception is currently (unncessarily) wrapped in an object, so this patch also simplifies that to directly send the exception object instead.
