Note first of all how the `PDFDocumentProxy.getJSActions` method in the API caches the result, which makes repeated lookups cheap enough to not really be an issue.
Secondly, with the previous patch, we're now only dispatching "pageopen"/"pageclose"-events when there's actually a sandbox that listens for them.
All-in-all, with these changes we can thus simplify the default-viewer "pageopen"-event handler a fair bit.
* add a comment to explain how minimal linewidth is computed.
* when context.linewidth < 1 after transform, firefox and chrome
don't render in the same way (issue #12810).
* set lineWidth to 1 after transform and before stroking
- aims fix issue #12295
- a pixel can be transformed into a rectangle with both heights < 1.
A single rescale leads to a rectangle with dim equals to 1 and
the other to something greater than 1.
* change the way to render rectangle with null dimensions:
- right now we rely on the lineWidth set before "re" but
it can be set after "re" and before "S" and in this case the rendering
will be wrong.
- render such rectangles as a single line.
There's built-in ESLint rule, see `sort-imports`, to ensure that all `import`-statements are sorted alphabetically, since that often helps with readability.
Unfortunately there's no corresponding rule to sort `export`-statements alphabetically, however there's an ESLint plugin which does this; please see https://www.npmjs.com/package/eslint-plugin-sort-exports
The only downside here is that it's not automatically fixable, but the re-ordering is a one-time "cost" and the plugin will help maintain a *consistent* ordering of `export`-statements in the future.
*Note:* To reduce the possibility of introducing any errors here, the re-ordering was done by simply selecting the relevant lines and then using the built-in sort-functionality of my editor.
Given that the API will now, after PR 12039, automatically pick the correct factories to use depending on the environment (browser vs. Node.js), we can utilize that in the unit-tests as well. This way we don't have to manually repeat the same initialization code in *multiple* unit-tests.
*Note:* The *official* PDF.js API is defined in `src/pdf.js`, hence the new exports in `src/display/api.js` will not affect that.
Also, updates the unit-test `FileReaderFactory` helpers similarily.
*Drive-by change:* Fix the `CMapReaderFactory` usage in the annotation unit-tests, since the cache should only contain raw data and not a Promise. While this obviously works as-is, having unit-tests that "abuse" the intended data format can easily lead to unnecessary failures if changes are made to the relevant `src/core/` code.
This will, in a very simple way using the existing events, thus allow the viewer to remove the "beforeunload" `window` event listener when the document is closed.
Generally speaking we want to avoid having *global* event listeners for the PDF document instance, which is why the `EventBus` exists, and instead reserve global events for the viewer itself. However, the `AnnotationStorage` "beforeunload" event unfortunately needs to be document-specific and we should thus ensure that it's correctly removed when the document is destroyed.
For DOM events all event names are lower-case, and the newly added PDF.js scripting-events thus "stick out" quite a bit. Even more so, considering that our internal `eventBus`-events follow the same naming convention.
Hence this patch, which changes the "updateFromSandbox"/"dispatchEventInSandbox" events to be lower-case instead.
Furthermore, using DOM events for communication *within* the PDF.js code itself (i.e. between code in `web/app.js` and `src/display/annotation_layer.js/`) feels *really* out of place.
That's exactly the reason that we have the `EventBus` abstraction, since it allowed us to remove prior use of DOM events, and this patch thus re-factors the code to make use of the `EventBus` instead for scripting-related events.
Obviously for events targeting a *specific element* using DOM events is still fine, but the "updatefromsandbox"/"dispatcheventinsandbox" ones should be using the `EventBus` internally.
*Drive-by change:* Use the `BaseViewer.currentScaleValue` setter unconditionally in `PDFViewerApplication._initializeJavaScript`, since it accepts either a string or a number.
- Update the `LinkAnnotationElement._bindJSAction` call-site to actually agree with the JSDocs, by passing in the `data`.
- Prevent the links created by `LinkAnnotationElement._bindJSAction` from being displayed with empty hashes; compare with e.g. `LinkAnnotationElement. _bindNamedAction`.
- The overall indentation-level in `WidgetAnnotationElement._setEventListener` can be reduced slightly by using early returns, which improves the overall readability of this method a bit. (We're also able to avoid unnecessary `in` usage here.)
- The code can also be made *slightly* more efficient overall, by moving the `this.data.actions` check into `WidgetAnnotationElement._setEventListeners` instead. This way we can avoid useless `this._setEventListener`-calls when there are no actions present.
- Actually remove the `isDown` property when destroying the scripting-instance.
- Mark all `mouseState` usage as "private" in the various classes.
- Ensure that the `AnnotationLayer` actually treats the parameter as properly *optional*, the same way that the viewer components do.
- For now remove the `mouseState` parameter from the `PDFPageView` class, and keep it only on the `BaseViewer`, since it's questionable if all of the scripting-functionality will work all that well without e.g. a full `BaseViewer`.
- Append the `mouseState` to the JSDoc for the `AnnotationElement` class, and just move its definition into the base-`AnnotationElement` class.
* the goal is to execute actions like Open or OpenAction
* can be tested with issue6106.pdf (auto-print)
* once #12701 is merged, we can add page actions
I completely missed this previously, but we obviously should remove the scriptElement as well to *really* clean-up everything properly.
Given that there's multiple existing usages of `loadScript` in the code-base, the safest/quickest solution seemed to be to have call-sites opt-in to remove the scriptElement using a new parameter.
Each quadrilateral needs to have its own link element, so the first
quadrilateral can use the already created element, but the next
quadrilaterals need to clone that element.
Not only does this reduce boilerplate since the documentation is the
same for all annotation classes, it also wasn't correct for the
annotation types that support quadpoints since they return an array of
section elements instead of a single one.
*This is a recent regression, which I stumbled upon while working on cleaning-up the gulpfile related to `pdf.sandbox.js` building.*
By placing the `ColorConverters` functionality in the `src/display/display_utils.js` file, you end up including a *significant* chunk of the `pdf.js` file in the built `pdf.scripting.js`/`pdf.sandbox.js` files.
Given that I cannot imagine that this was actually intended, since it inflates the built files with unnecessary/unused code, this moves `ColorConverters` to a new file instead (thus breaking the dependencies).
To hopefully reduce the risk future bugs, along these lines, a big comment is also placed at the top of the new file.
Finally, the `ColorConverters` is converted to a class with static methods, since this felt slightly cleaner overall.
Given that we already include the "Content-Disposition"-header filename, when it exists, it shouldn't hurt to also include the information from the "Content-Length"-header.
For PDF documents opened via a URL, which should be a very common way for the PDF.js library to be used, this will[1] thus provide a way of getting the PDF filesize without having to wait for the `getDownloadInfo`-promise to resolve[2].
With these API improvements, we can also simplify the filesize handling in the `PDFDocumentProperties` class.
---
[1] Assuming that the server is correctly configured, of course.
[2] Since that's not *guaranteed* to happen in general, with e.g. `disableAutoFetch = true` set.
- Add support for logical assignment operators, i.e. `&&=`, `||=`, and `??=`, with a Babel-plugin. Given that these required incrementing the ECMAScript version in the ESLint and Acorn configurations, and that platform/browser support is still fairly limited, always transpiling them seems appropriate for now.
- Cache the `hasJSActions` promise in the API, similar to the existing `getAnnotations` caching. With this implemented, the lookup should now be cheap enough that it can be called unconditionally in the viewer.
- Slightly improve cleanup of resources when destroying the `WorkerTransport`.
- Remove the `annotationStorage`-property from the `PDFPageView` constructor, since it's not necessary and also brings it more inline with the `BaseViewer`.
- Update the `BaseViewer.createAnnotationLayerBuilder` method to actaually agree with the `IPDFAnnotationLayerFactory` interface.[1]
- Slightly tweak a couple of JSDoc comments.
---
[1] We probably ought to re-factor both the `IPDFTextLayerFactory` and `IPDFAnnotationLayerFactory` interfaces to take parameter objects instead, since especially the `IPDFAnnotationLayerFactory` one is becoming quite unwieldy. Given that that would likely be a breaking change for any custom viewer-components implementation, this probably requires careful deprecation.
* remove 1st param of _createPopup (almost useless for a method)
* prepend popup div to avoid to have them on top of some highlights (and so "disable" partially mouse events)
* add a ref test for issue #12504
* in some pdf, there are actions with "event.source.hidden = ..."
* in order to handle visibility when printing, annotationStorage is extended to store multiple properties (value, hidden, editable, ...)
* When no actions then set it to null instead of empty object
* Even if a field has no actions, it needs to listen to events from the sandbox in order to be updated if an action changes something in it.
By using optional chaining, see https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Operators/Optional_chaining, it's possible to reduce unnecessary code-repetition in many cases.
Note that these changes also reduce the size of the *built* `pdf.js` file, when `SKIP_BABEL == true` is set, and for the `MOZCENTRAL` build-target that result in a `0.1%` filesize reduction from a simple and mostly mechanical code change.
The vast majority of the time, unless a Pattern is active, the `strokeColor`-property contains a "simple" colour value represented by a String. Hence it seems somewhat ridiculous to do a `hasOwnProperty` check on a String, and it's should thus be possible to improve things a tiny bit here.
Unfortunately using a simple `instanceof` check would only work for `TilingPattern`s, but not for the `ShadingIRs` given how they are implemented; see `src/display/pattern_helper.js`. (While that file could probably do with some clean-up, given the age of some of its code, that probably shouldn't happen here.)
Finally, the `this.type = "Pattern"`-property of the various Shadings/TilingPatterns were removed, since I cannot see why it's necessary when we can simply check for a `getPattern` method instead. Note that part of this code even pre-dates the main/worker-thread split, which probably in part explains why it looks the way it does.
* it's faster to generate the color code in using a table for components
* it's very likely a way faster to parse (when setting the color in the canvas)
Given that `Object.fromEntries` doesn't seem to *guarantee* that a `null` prototype is used, we thus hack around that by using `Object.assign` with `Object.create(null)`.
Since we no longer use SystemJS to load the unit-tests, there's now nothing that prevents us from using optional chaining and nullish coalescing in the `src/display/` directory.
Ensure that these tooltip-only Annotations are handled as "internalLink"s, to ensure that they behave as expected in PresentationMode (e.g. they should still use a `pointer`-cursor).
Ensure that `PDFLinkService.getDestinationHash` won't create links with empty hashes, since those don't really make a lot of sense in general (this improves things for tooltip-only Annotations).
This PDF file can be used for testing: http://mirrors.ctan.org/macros/latex/contrib/pdfcomment/doc/pdfcomment.pdf#page=14
This modernizes and improves the code, by using `async`/`await` and by extracting the helper function to its own method.
To hopefully avoid confusion, given the next patch, the method is also re-named to `goToDestination` to make is slightly clearer what it actually does.
*This patch is based on a couple of smaller things that I noticed when working on PR 12479.*
- Don't store the /Fields on the `formInfo` getter, since that feels like overloading it with unintended (and too complex) data, and utilize a `hasFields` boolean instead.
This functionality was originally added in PR 12271, to help determine what kind of form data a PDF document contains, and I think that we should ensure that the return value of `formInfo` only consists of "simple" data.
With these changes the `fieldObjects` getter instead has to look-up the /Fields manually, however that shouldn't be a problem since the access is guarded by a `formInfo.hasFields` check which ensures that the data both exists and is valid. Furthermore, most documents doesn't even have any /AcroForm data anyway.
- Determine the `hasFields` property *first*, to ensure that it's always correct even if there's errors when checking e.g. the /XFA or /SigFlags entires, since the `fieldObjects` getter depends on it.
- Simplify a loop in `fieldObjects`, since the object being accessed is a `Map` and those have built-in iteration support.
- Use a higher logging level for errors in the `formInfo` getter, and include the actual error message, since that'd have helped with fixing PR 12479 a lot quicker.
- Update the JSDoc comment in `src/display/api.js` to list the return values correctly, and also slightly extend/improve the description.
This simplifies/consolidates the ESLint configuration slightly in the `src/` folder, and prevents the addition of any new files where `var` is being used.[1]
Hence we no longer need to manually add `/* eslint no-var: error */` in files, which is easy to forget, and can instead disable the rule in the `src/core/` files where `var` is still in use.
---
[1] Obviously the `no-var` rule can, in the same way as every other rule, be disabled on a case-by-case basis where actually necessary.
Previously this rule has been enabled in the `web/` folder, and in select files in the `src/` sub-folders.
Note that a number of the files in the `src/display/` folder were already enforcing the `no-var` rule, and thanks to Prettier the necessary re-writing will be (mostly) handled automatically.
Please find additional details about the ESLint rule at https://eslint.org/docs/rules/no-var
This changes the `transformOrigin` calculations in `AnnotationElement._createContainer` and `PopupAnnotationElement.render`, to ensure that e.g. the clickable area of annotations and/or popups are both positioned correctly.
The problem occurs for *negative* values, since they're not negated correctly because of how the `transformOrigin` strings were build; see issue 12406 for a more in-depth explanation. Previously, for negative values, the `transformOrigin` strings would thus be ignored since they're not valid.
We were correctly finishing the SMask group but not restoring all the extra
transformations applied in stateStack, so if somebody ends up drawing to the
same context after canceling mid-draw we'd get artifacts.
This re-lands #12363 and fixes Mozilla bug 1664178[1].
[1]: https://bugzilla.mozilla.org/show_bug.cgi?id=1664178
This fixes the issue that caused #12363 to get reverted, see #12367.
When we end the SMask group and stateStack.length is zero, nothing updates
this.current to reflect it.
We were correctly finishing the SMask group but not restoring all the extra
transformations applied in stateStack, so if somebody ends up drawing to the
same context after canceling mid-draw we'd get artifacts.
This fixes Mozilla bug 1664178[1].
[1]: https://bugzilla.mozilla.org/show_bug.cgi?id=1664178
* Move display/xml_parser.js in shared to use it in worker
* Save form data in XFA datasets when pdf is a mix of acroforms and xfa
Co-authored-by: Brendan Dahl <brendan.dahl@gmail.com>
*Besides, obviously, adding viewer support:* This patch attempts to improve the general API for Optional Content Groups slightly, by adding a couple of new methods for interacting with the (more complex) data structures of `OptionalContentConfig`-instances. (Thus allowing us to mark some of the data as "private", given that it probably shouldn't be manipulated directly.)
By utilizing not just the "raw" Optional Content Groups, but the data from the `/Order` array when available, we can thus display the Layers in a proper tree-structure with collapsible headings for PDF documents that utilizes that feature.
Note that it's possible to reset all Optional Content Groups to their default visibility state, simply by double-clicking on the Layers-button in the sidebar.
(Currently that's indicated in the Layers-button tooltip, which is obviously easy to overlook, however it's probably the best we can do for now without adding more buttons, or even a dropdown-toolbar, to the sidebar.)
Also, the current Layers-button icons are a little rough around the edges, quite literally, but given that the viewer will soon have its UI modernized anyway they hopefully suffice in the meantime.
To give users *full* control of the visibility of the various Optional Content Groups, even those which according to the `/Order` array should not (by default) be toggleable in the UI, this patch will place those under a *custom* heading which:
- Is collapsed by default, and placed at the bottom of the Layers-tree, to be a bit less obtrusive.
- Uses a slightly different formatting, compared to the "regular" headings.
- Is localizable.
Finally, note that the thumbnails are *purposely* always rendered with all Optional Content Groups at their default visibility state, since that seems the most useful and it's also consistent with other viewers.
To ensure that this works as intended, we'll thus disable the `PDFThumbnailView.setImage` functionality when the Optional Content Groups have been changed in the viewer. (This obviously means that we'll re-render thumbnails instead of using the rendered pages. However, this situation ought to be rare enough for this to not really be a problem.)
The `/Order` array is used to improve the display of Optional Content groups in PDF viewers, and it allows a PDF document to e.g. specify that Optional Content groups should be displayed as a (collapsable) tree-structure rather than as just a list.
Note that not all available Optional Content groups must be present in the `/Order` array, and PDF viewers will often (by default) hide those toggles in the UI.
To allow us to improve the UX around toggling of Optional Content groups, in the default viewer, these hidden-by-default groups are thus appended to the parsed `/Order` array under a *custom* nesting level (with `name == null`).
Finally, the patch also slightly tweaks an `OptionalContentConfig` related JSDoc-comment in the API.
In `display/canvas.js` the accent offsets must be multiplied by `fontSize` to make the offsets large enough. Another problem is in `core/type1_parser.js` when the Type1 command `seac` is handled. There is an error in the Adobe Type1 spec. See chapter 6 in Type1 Font Format Supplement, which provides an errata: The arguments of `seac` specify the offset of the left side bearing (LSB) points, not the offset of origins. This can be fixed in `core/type1_parser.js` by adding the difference of the LSB values.
Obviously it doesn't make sense to call that method without providing an `AnnotationStorage`-instance, however we should ensure that doing so won't cause errors.
Hence we need to check that `annotationStorage` is actually defined, before attempting to call its `resetModified` method.
This commit makes the following improvements:
- The code is similar to the other interactive form widgets now, with a
clear note for the only difference.
- Calling `getOrCreateValue` unconditionally ensures that choice widgets
always have a value in the annotation storage. Previously we only
inserted a value in the annotation storage when an option matched or
when a selection was changed. However, this causes breakage when
saving/printing because comboboxes, which we don't fully support yet
but are rendered, might not have a value in storage at all. Their
field value might not match any option since it allows the user to
enter a custom value.
- Calling `getOrCreateValue` unconditionally ensures that forms with
choice widgets no longer always trigger a warning when the user
navigates away from the page. This fixes
https://github.com/mozilla/pdf.js/pull/12241#discussion_r474279654
Given that `renderInteractiveForms` is now enabled by default in "full" viewer, it seems reasonable to enable it by default in the viewer components as well.
Especially considering that it's simple to disable, when creating the affected components, for anyone implementing their own viewer.
The export value is used when the document is saved, so it should also
be used when the document is opened to determine which choice widget
option is selected. The display value is, as the name implies, only to
be used for viewer display purposes and not for other logic.
This makes sure that in the document from #12233 the "Favourite colour"
choice widget is correctly initialized with "Red" instead of "Black"
because the field value is equal to the export value (always the case),
but not the display value (not always the case). Moreover, saving now
also correctly uses the export value and not the display value.
Related to https://bugzilla.mozilla.org/show_bug.cgi?id=1659753
This allows Firefox trigger a "save" event from ctrl/cmd+s or the "Save
Page As" context menu, which in turn lets pdf.js generate a new PDF if
there is form data to save.
I also now use `sourceEventType` on downloads so Firefox can determine if
it should launch the "open with" dialog or "save as" dialog.
This is *similar* to the existing transfer function support for SMasks, but extended to simple image data.
Please note that the extra amount of data now being sent to the worker-thread, for affected /ExtGState entries, is limited to *at most* 4 `Uint8Array`s each with a length of 256 elements.
Refer to https://www.adobe.com/content/dam/acom/en/devnet/acrobat/pdfs/PDF32000_2008.pdf#G9.1658137 for additional details.
- Initialize the `AnnotationStorage`-instance, on `PDFDocumentProxy`, lazily.
- Change the `AnnotationStorage` to use a `Map` internally, rather than a regular Object (simplifies the following points).
- Let `AnnotationStorage.getAll` return `null` when there's no data stored, to avoid unnecessary parsing on the worker-thread. This ought to "just work", since the worker-thread code *should* already handle the `!annotationStorage` case everywhere.
- Add a new `AnnotationStorage.size` getter, to be able to easily tell if there's any data stored.
While the parameter name (clearly) suggests that an `AnnotationStorage`-instance is expected, looking at the only call-sites that include the parameter (i.e. the `PDFPrintServiceFactory` instances) it actually contains just a normal Object.
Hence it seems much more reasonable to actually pass a valid `AnnotationStorage`-instance, as the name suggests, and simply have `PDFPageProxy.render` do the `annotationStorage.getAll()` call. (Since we cannot send an `AnnotationStorage`-instance as-is to the worker-thread, given the "structured clone algorithm".)
Over time we used multiple different formats for JSDoc comments. This
commit standardizes those formats to the one we used most often.
Moreover, this removes the example in the outline endpoint documentation
since it now has a proper type definition and it didn't render correctly
in JSDoc.
This commit:
- formats the documentation block according to the standards;
- replaces the callback definitions with the `function` type (we have
that for other definitions already and the callback type was not
rendered correctly by JSDoc);
- synchronizes the type documentation and the class documentation;
- fixes the documentation by making it easier to read and making sure
that all optional properties are indicated as such;
- uses the `@link` tag to indicate links to other code.
The `typestest` still passes and JSDoc now renders this class correctly.
Add a new method to the API to get the optional content configuration. Add
a new render task param that accepts the above configuration.
For now, the optional content is not controllable by the user in
the viewer, but renders with the default configuration in the PDF.
All of the test files added exhibit different uses of optional content.
Fixes#269.
Fix test to work with optional content.
- Change the stopAtErrors test to ensure the operator list has something,
instead of asserting the exact number of operators.
These errors can/will occur if data is still loading when the document is destroyed, which is the case in the API unit-tests that load the `tracemonkey.pdf` file.
While this patch prevents these kind of problems, and thus allows us to update Jasmine again, I cannot help but thinking that it's slightly "hacky". Basically, we'll simply catch and ignore (some) rejected promises once the document is destroyed and/or its data loading is aborted. However, I don't *think* that these changes should cause issues in general, since we don't really care about errors once document destruction has started (note e.g. the fair number of `catch` handlers ignoring `AbortException`s already).
*The [api-minor] label probably ought to have been added to the original PR, given the changes to the `createAnnotationLayerBuilder` signature (if nothing else).*
This patch fixes the following things:
- Let the `AnnotationLayer.render` method create an `AnnotationStorage`-instance if none was provided, thus making the parameter *properly* optional. This not only fixes the reference tests, it also prevents issues when the viewer components are used.
- Stop exporting `AnnotationStorage` in the official API, i.e. the `src/pdf.js` file, since it's no longer necessary given the change above. Generally speaking, unless absolutely necessary we probably shouldn't export unused things in the API.
- Fix a number of JSDocs `typedef`s, in `src/display/` and `web/` code, to actually account for the new `annotationStorage` parameter.
- Update `web/interfaces.js` to account for the changes in `createAnnotationLayerBuilder`.
- Initialize the storage, in `AnnotationStorage`, using `Object.create(null)` rather than `{}` (which is the PDF.js default).
This PR adds typescript definitions from the JSDoc already present.
It adds a new gulp-target 'types' that calls 'tsc', the typescript
compiler, to create the definitions.
To use the definitions, users can simply do the following:
```
import {getDocument, GlobalWorkerOptions} from "pdfjs-dist";
import pdfjsWorker from "pdfjs-dist/build/pdf.worker.entry";
GlobalWorkerOptions.workerSrc = pdfjsWorker;
const pdf = await getDocument("file:///some.pdf").promise;
```
Co-authored-by: @oBusk
Co-authored-by: @tamuratak
Besides making general sense, as far as I can tell, this patch should also prevent *one* source of `Uncaught (in promise) ...` exceptions.
Unfortunately `reason instanceof AbortError` doesn't work here, since `AbortError` isn't actually defined in browsers; note how even the DOM specification contains an example using the `name` property: https://dom.spec.whatwg.org/#aborting-ongoing-activities
This patch prevents the following errors from being logged in the console, when the unit-tests are running:
- Firefox: `Uncaught (in promise) DOMException: The operation was aborted.`
- Chrome: `Uncaught (in promise) DOMException: The user aborted a request.`
There's quite frankly no particular reason to special-case Type3-fonts with image resources, which are very rare anyway, now that we have a general mechanism for sending/receiving images globally.
Originally there weren't any (generally) good ways to handle errors gracefully, on the worker-side, however that's no longer the case and we can simply fallback to the existing `ignoreErrors` functionality instead.
Also, please note that the "no `/XObject` found"-scenario should be *extremely* unlikely in practice and would only occur in corrupt/broken documents.
Note that the `PartialEvaluator.getOperatorList` case is especially bad currently, since we'll simply (attempt to) send the data as-is to the main-thread. This is quite bad, since in a corrupt/broken document the data *could* contain anything and e.g. be unclonable (which would cause breaking errors).
Also, we're (obviously) not attempting to do anything with this "raw" `OPS.paintXObject` data on the main-thread and simply ensuring that we never send it definately seems like the correct approach.
This moves, and slightly simplifies, code that's currently residing in the unit-test utils into the actual library, such that it's bundled with `GENERIC`-builds and used in e.g. the API-code.
As an added bonus, this also brings out-of-the-box support for CMaps in e.g. the Node.js examples.
Tweak the `QueueOptimizer` to recognize `OPS.paintImageMaskXObject` operators as *repeated* when the "skew" transformation matrix elements are non-zero (issue 8078)
As can be seen in the code there's a handful of places where this structure needs to be iterated, something that becomes cumbersome when dealing with `Object`s. Hence, by changing this to a `Map` instead we can both simplify the code and avoid creating unnecessary closures.
Particularily the `PDFPageProxy._tryCleanup` method becomes a lot more readable, at least in my opinion.
Finally, since this property is intended to be "private" the name is adjusted to reflect that.
This patch aims to simplify the `PDFPageProxy._destroy` method, by:
- Replacing the unnecessary `forEach` with a "regular" `for`-loop instead.
- Use a more appropriate variable name, since `intentState.renderTasks` contain instances of `InternalRenderTask`.
- Move the "is rendering completed"-handling to a new `InternalRenderTask.completed` getter, to abstract away some (mostly) internal `InternalRenderTask` state.
*First of all, I should mention that my understanding of the finer details of the `QueueOptimizer` (and its related `CanvasGraphics` methods) is somewhat limited.*
Hence I'm not sure if there's actually a very good reason for *only* considering ImageMasks where the "skew" transformation matrix elements are zero as *repeated*, however simply looking at the code I just don't see why these elements cannot be non-zero as long as they are *all identical* for the ImageMasks.
Furthermore, looking at the *group* case (which is what we're currently falling back to), there's no particular limitation placed upon the transformation matrix elements.
While this patch obviously isn't enough to *completely* fix the issue, since there should be a visible Pattern rendered as well[1], it seem (at least to me) like enough of an improvement that submitting this is justified.
With these changes the referenced PDF document will no longer hang the *entire* browser, and rendering also finishes in a *reasonable* time (< 10 seconds for me) which seem fine given the *huge* number of identical inline images present.[2]
---
[1] Temporarily changing the Pattern to a solid color *does* render the correct/expected area, which suggests that the remaining problem is a pre-existing issue related to the Pattern-handling itself rather than the `QueueOptimizer` functionality.
[2] The document isn't exactly rendered immediately in e.g. Adobe Reader either.
Since there's (essentially) no tests for the SVG-backend, these changes didn't make in into PR 11912 when the code in the `src/display/canvas.js` file was modified.
Both of the removed methods were added in PR 2719, however they are no longer used:
- It appears that `hasPendingRequests` was never used at all, even from the beginning.
- The only general PDF.js library usage of `abortAllRequests` was removed in PR 6879, which is now four years ago. (Originally the Firefox-specific network implementation, see https://searchfox.org/mozilla-central/source/browser/extensions/pdfjs/content/PdfJsNetwork.jsm, was shared with the `src/display/network.js` file and *there* this method is used. However, since all of the Firefox-specific code now lives directly in mozilla-central, that's not relevant for the removal in this patch.)
In the PDF file from the issue below, the fill alpha (`ca`) is set
before drawing the circles using the `setGState` operator. Doing so
causes the global alpha to be set on the canvas' context for the canvas
back-end, but this was not handled in the SVG back-end. This patch fixes
that by taking the fill opacity into account when drawing shading
patterns in the same way as done elsewhere so it is only included if the
value is non-default.
Fixes#11812.
With the changes in previous patches, the `disableCreateObjectURL` option/functionality is no longer used for anything in the API and/or in the Worker code.
Note however that there's some functionality, mainly related to file loading/downloading, in the GENERIC version of the default viewer which still depends on this option.
Hence the `disableCreateObjectURL` option (and related compatibility code) is moved into the viewer, see e.g. `web/app_options.js`, such that it's still available in the default viewer.
Currently some JPEG images are decoded by the built-in PDF.js decoder in `src/core/jpg.js`, while others attempt to use the browser JPEG decoder. This inconsistency seem unfortunate for a number of reasons:
- It adds, compared to the other image formats supported in the PDF specification, a fair amount of code/complexity to the image handling in the PDF.js library.
- The PDF specification support JPEG images with features, e.g. certain ColorSpaces, that browsers are unable to decode natively. Hence, determining if a JPEG image is possible to decode natively in the browser require a non-trivial amount of parsing. In particular, we're parsing (part of) the raw JPEG data to extract certain marker data and we also need to parse the ColorSpace for the JPEG image.
- While some JPEG images may, for all intents and purposes, appear to be natively supported there's still cases where the browser may fail to decode some JPEG images. In order to support those cases, we've had to implement a fallback to the PDF.js JPEG decoder if there's any issues during the native decoding. This also means that it's no longer possible to simply send the JPEG image to the main-thread and continue parsing, but you now need to actually wait for the main-thread to indicate success/failure first.
In practice this means that there's a code-path where the worker-thread is forced to wait for the main-thread, while the reverse should *always* be the case.
- The native decoding, for anything except the *simplest* of JPEG images, result in increased peak memory usage because there's a handful of short-lived copies of the JPEG data (see PR 11707).
Furthermore this also leads to data being *parsed* on the main-thread, rather than the worker-thread, which you usually want to avoid for e.g. performance and UI-reponsiveness reasons.
- Not all environments, e.g. Node.js, fully support native JPEG decoding. This has, historically, lead to some issues and support requests.
- Different browsers may use different JPEG decoders, possibly leading to images being rendered slightly differently depending on the platform/browser where the PDF.js library is used.
Originally the implementation in `src/core/jpg.js` were unable to handle all of the JPEG images in the test-suite, but over the last couple of years I've fixed (hopefully) all of those issues.
At this point in time, there's two kinds of failure with this patch:
- Changes which are basically imperceivable to the naked eye, where some pixels in the images are essentially off-by-one (in all components), which could probably be attributed to things such as different rounding behaviour in the browser/PDF.js JPEG decoder.
This type of "failure" accounts for the *vast* majority of the total number of changes in the reference tests.
- Changes where the JPEG images now looks *ever so slightly* blurrier than with the native browser decoder. For quite some time I've just assumed that this pointed to a general deficiency in the `src/core/jpg.js` implementation, however I've discovered when comparing two viewers side-by-side that the differences vanish at higher zoom levels (usually around 200% is enough).
Basically if you disable [this downscaling in canvas.js](8fb82e939c/src/display/canvas.js (L2356-L2395)), which is what happens when zooming in, the differences simply vanish!
Hence I'm pretty satisfied that there's no significant problems with the `src/core/jpg.js` implementation, and the problems are rather tied to the general quality of the downscaling algorithm used. It could even be seen as a positive that *all* images now share the same downscaling behaviour, since this actually fixes one old bug; see issue 7041.
Currently image resources, as opposed to e.g. font resources, are handled exclusively on a page-specific basis. Generally speaking this makes sense, since pages are separate from each other, however there's PDF documents where many (or even all) pages actually references exactly the same image resources (through the XRef table). Hence, in some cases, we're decoding the *same* images over and over for every page which is obviously slow and wasting both CPU and memory resources better used elsewhere.[1]
Obviously we cannot simply treat all image resources as-if they're used throughout the entire PDF document, since that would end up increasing memory usage too much.[2]
However, by introducing a `GlobalImageCache` in the worker we can track image resources that appear on more than one page. Hence we can switch image resources from being page-specific to being document-specific, once the image resource has been seen on more than a certain number of pages.
In many cases, such as e.g. the referenced issue, this patch will thus lead to reduced memory usage for image resources. Scrolling through all pages of the document, there's now only a few main-thread copies of the same image data, as opposed to one for each rendered page (i.e. there could theoretically be *twenty* copies of the image data).
While this obviously benefit both CPU and memory usage in this case, for *very* large image data this patch *may* possibly increase persistent main-thread memory usage a tiny bit. Thus to avoid negatively affecting memory usage too much in general, particularly on the main-thread, the `GlobalImageCache` will *only* cache a certain number of image resources at the document level and simply fallback to the default behaviour.
Unfortunately the asynchronous nature of the code, with ranged/streamed loading of data, actually makes all of this much more complicated than if all data could be assumed to be immediately available.[3]
*Please note:* The patch will lead to *small* movement in some existing test-cases, since we're now using the built-in PDF.js JPEG decoder more. This was done in order to simplify the overall implementation, especially on the main-thread, by limiting it to only the `OPS.paintImageXObject` operator.
---
[1] There's e.g. PDF documents that use the same image as background on all pages.
[2] Given that data stored in the `commonObjs`, on the main-thread, are only cleared manually through `PDFDocumentProxy.cleanup`. This as opposed to data stored in the `objs` of each page, which is automatically removed when the page is cleaned-up e.g. by being evicted from the cache in the default viewer.
[3] If the latter case were true, we could simply check for repeat images *before* parsing started and thus avoid handling *any* duplicate image resources.
With these changes SystemJS is now only used, during development, on the worker-thread and in the unit/font-tests, since Firefox is currently missing support for worker modules; please see https://bugzilla.mozilla.org/show_bug.cgi?id=1247687
Hence all the JavaScript files in the `web/` and `src/display/` folders are now loaded *natively* by the browser (during development) using standard `import` statements/calls, thanks to a nice `import-maps` polyfill.
*Please note:* As soon as https://bugzilla.mozilla.org/show_bug.cgi?id=1247687 is fixed in Firefox, we should be able to remove all traces of SystemJS and thus finally be able to use every possible modern JavaScript feature.
As part of trying to reduce the usage of SystemJS in the development viewer, this patch is a necessary step that will allow removal of some `require` statements.
Currently this uses `SystemJS.import` in non-PRODUCTION mode, but it should be possible to replace those with standard *dynamic* `import` calls in the future.
This replaces some additional `require`/`exports` usage with standard `import`/`export` statements instead.
Hence another, small, part in the effort to reduce the reliance on SystemJS-specific functionality in the development viewer.
Having `assert` calls without a message string isn't very helpful when debugging, and it turns out that it's easy enough to make use of ESLint to enforce better `assert` call-sites.
In a couple of cases the `assert` calls were changed to "regular" throwing of errors instead, since that seemed more appropriate.
Please find additional details about the ESLint rule at https://eslint.org/docs/rules/no-restricted-syntax
We already rendered the name for radio buttons, but it was missing for
all other interactive form elements. This commit adds that so that
values entered in form elements can be read based on the element name.
*This patch implements https://github.com/mozilla/pdf.js/pull/11777#issuecomment-609741348*
This extends the work from PR 11773 and 11777 further, by immediately releasing the `font.data` property once the font been attached to the DOM. By not unnecessarily holding onto this data on the main-thread, we'll thus reduce the memory usage of fonts even further (especially beneficial in longer documents with composite fonts).
The new behaviour is controlled by the recently added `fontExtraProperties` API option (adding a new option just for this patch didn't seem necessary), since there's one edge-case in the SVG renderer where the `font.data` property is necessary (see the `pdf2svg` example).
Note that while the default viewer does run clean-up with an idle timeout, that timeout will be reset whenever rendering occurs *or* when scrolling happens in the viewer. In practice this means that unless the user doesn't interact with the viewer in *any* way during an extended period of time, currently set to 30 seconds, the `PDFDocumentProxy.cleanup` method will never be called and font resources will thus not be cleaned-up.
As evident from the code, `PageViewport` only supports[1] `rotation` values which are a multiple of 90 degrees. Besides it being somewhat difficult to imagine meaningful use-cases for a non-multiple of 90 degrees `rotation`, the code also becomes both simpler and more efficient by not having to consider arbitrary `rotation` values.
However, any invalid rotation will *silently* fallback to assume zero `rotation` which probably isn't great for e.g. `PDFPageProxy.getViewport` in the API. Hence this patch, which will now enforce that only valid `rotation` values are accepted.
---
[1] As far as I can tell, from looking through the history, nothing else has ever been supported either.
*Please note:* These changes were done automatically, using the `gulp lint --fix` command.
This rule is already enabled in mozilla-central, see https://searchfox.org/mozilla-central/rev/567b68b8ff4b6d607ba34a6f1926873d21a7b4d7/tools/lint/eslint/eslint-plugin-mozilla/lib/configs/recommended.js#103-104
The main advantage, besides improved consistency, of this rule is that it reduces the size of the code (by 3 bytes for each case). In the PDF.js code-base there's close to 8000 instances being fixed by the `dot-notation` ESLint rule, which end up reducing the size of even the *built* files significantly; the total size of the `gulp mozcentral` build target changes from `3 247 456` to `3 224 278` bytes, which is a *reduction* of `23 178` bytes (or ~0.7%) for a completely mechanical change.
A large number of these changes affect the (large) lookup tables used on the worker-thread, but given that they are still initialized lazily I don't *think* that the new formatting this patch introduces should undo any of the improvements from PR 6915.
Please find additional details about the ESLint rule at https://eslint.org/docs/rules/dot-notation
This patch fixes yet another instalment in the never-ending series of "what the *bleep* was I thinking", by changing the `PDFDocumentProxy.getViewerPreferences` method to return `null` by default.
Not only is this method now consistent with many other API methods, for the data not present case, but it also avoids having to e.g. loop through an object to check if it's actually empty (note the old unit-test).
Please note that these changes were done automatically, using `gulp lint --fix`.
Given that the major version number was increased, there's a fair number of (primarily whitespace) changes; please see https://prettier.io/blog/2020/03/21/2.0.0.html
In order to reduce the size of these changes somewhat, this patch maintains the old "arrowParens" style for now (once mozilla-central updates Prettier we can simply choose the same formatting, assuming it will differ here).
At this point in time, compared to when the "ignore single-char" code was added, we *should* generally be doing a much better job of combining text into as few chunks as possible.
However, there's still bad cases where we're not able to combine text as much as one would like, which is why I'm *not* proposing to simply measure/scale all text. Instead this patch will to only measure/scale single-char text in cases where the horizontal/vertical scale is off significantly, since that's were you'd expect bad text-selection behaviour otherwise.
Note that most of the movement caused by this patch is with Type3 fonts, which is a somewhat special font type and one where our current text-selection behaviour is probably the least good.
For years now, the `Font.exportData` method has (because of its previous implementation) been exporting many properties despite them being completely unused on the main-thread and/or in the API.
This is unfortunate, since among those properties there's a number of potentially very large data-structures, containing e.g. Arrays and Objects, which thus have to be first structured cloned and then stored on the main-thread.
With the changes in this patch, we'll thus by default save memory for *every* `Font` instance created (there can be a lot in longer documents). The memory savings obviously depends a lot on the actual font data, but some approximate figures are: For non-embedded fonts it can save a couple of kilobytes, for simple embedded fonts a handful of kilobytes, and for composite fonts the size of this auxiliary can even be larger than the actual font program itself.
All-in-all, there's no good reason to keep exporting these properties by default when they're unused. However, since we cannot be sure that every property is unused in custom implementations of the PDF.js library, this patch adds a new `getDocument` option (named `fontExtraProperties`) that still allows access to the following properties:
- "cMap": An internal data structure, only used with composite fonts and never really intended to be exposed on the main-thread and/or in the API.
Note also that the `CMap`/`IdentityCMap` classes are a lot more complex than simple Objects, but only their "internal" properties survive the structured cloning used to send data to the main-thread. Given that CMaps can often be *very* large, not exporting them can also save a fair bit of memory.
- "defaultEncoding": An internal property used with simple fonts, and used when building the glyph mapping on the worker-thread. Considering how complex that topic is, and given that not all font types are handled identically, exposing this on the main-thread and/or in the API most likely isn't useful.
- "differences": An internal property used with simple fonts, and used when building the glyph mapping on the worker-thread. Considering how complex that topic is, and given that not all font types are handled identically, exposing this on the main-thread and/or in the API most likely isn't useful.
- "isSymbolicFont": An internal property, used during font parsing and building of the glyph mapping on the worker-thread.
- "seacMap": An internal map, only potentially used with *some* Type1/CFF fonts and never intended to be exposed in the API. The existing `Font.{charToGlyph, charToGlyphs}` functionality already takes this data into account when handling text.
- "toFontChar": The glyph map, necessary for mapping characters to glyphs in the font, which is built upon the various encoding information contained in the font dictionary and/or font program. This is not directly used on the main-thread and/or in the API.
- "toUnicode": The unicode map, necessary for text-extraction to work correctly, which is built upon the ToUnicode/CMap information contained in the font dictionary, but not directly used on the main-thread and/or in the API.
- "vmetrics": An array of width data used with fonts which are composite *and* vertical, but not directly used on the main-thread and/or in the API.
- "widths": An array of width data used with most fonts, but not directly used on the main-thread and/or in the API.
Given the way that "classes" were previously implemented in PDF.js, using regular functions and closures, there's a fair number of false positives when the `no-shadow` ESLint rule was enabled.
Note that while *some* of these `eslint-disable` statements can be removed if/when the relevant code is converted to proper `class`es, we'll probably never be able to get rid of all of them given our naming/coding conventions (however I don't really see this being a problem).
Please note that the `setPDFNetworkStreamFactory` functionality isn't exposed in the public API, i.e. not listed among the exports in the `src/pdf.js` file, and that even if it were it wouldn't really be useful considering that none of the `PDFNetworkStream`/`PDFFetchStream`/`PDFNodeStream` classes are exported either.
These methods were deprecated already in PDF.js version `2.1.266`, see PRs 10246 and 10369, and were converted to throw `Error`s upon invocation in PDF.js version `2.4.456`, see PR 11219.
Hence it ought to be possible to remove these methods now.
*This is part of a series of patches that will try to split PR 11566 into smaller chunks, to make reviewing more feasible.*
Once all the code has been fixed, we'll be able to eventually enable the ESLint no-shadow rule; see https://eslint.org/docs/rules/no-shadow
This property has never been documented and/or *intentionally* exposed through the API, instead the `PDFPageProxy.pageNumber` property is the documented/intended API to use here.
Hence pageIndex is changed to a "private" property on `PDFPageProxy` instances, and internal API functionality is also updated to *consistently* use `this._pageIndex` rather than a mix of formats.
Rather than duplicating the lookup and caching in multiple files, it seems easier to simply move all of this functionality into `src/shared/util.js` instead.
This will also help avoid a bunch of ESLint errors once the `no-shadow` rule is eventually enabled.
The only reason for the `return undefined;` lines was to appease the ESLint `consistent-return` rule, but that's not actually necessary if you make use of the fact that the method is `async` and that we can thus await the Promise rather than returning it.
This patch deprecates the existing `getOpenActionDestination` API method, in favor of a better and more general `getOpenAction` method instead. (For now JavaScript actions, related to printing, are still handled as before.)
By clearly separating "regular" Print actions from the JavaScript handling, it's thus possible to get rid of the somewhat annoying and strictly incorrect warning when the viewer loads.
It's no longer necessary to special-case this getter in the `GenericFontLoader` case, since the GENERIC build hasn't been using `mozPrintCallback` for years now (furthermore Firefox 63 is really old as well).
Please note that these changes do *not* affect the *public* interface of the `Metadata` class, but only touches internal structures.[1]
These changes were prompted by looking at the `getAll` method, which simply returns the "private" metadata object to the consumer. This seems wrong conceptually, since it allows way too easy/accidental changes to the internal parsed metadata.
As part of fixing this, the internal metadata was changed to use a `Map` rather than a plain Object.
---
[1] Basically, we shouldn't need to worry about someone depending on internal implementation details.
- Remove the "capturing group" in the regular expression that removes leading "junk" from the raw metadata, since it's not necessary here (it's simply a case of too much copy-pasting in a prior patch).
According to [MDN](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Guide/Regular_Expressions/Cheatsheet#Groups_and_ranges) you want to, for performance reasons, avoid "capturing groups" unless actually needed.
- Add inline comments to document a bunch of magic values in the code.
Given that all `TypedArray` polyfills were removed in PDF.js version `2.0`, since native support is now required, this branch has been dead code for awhile.
In practice it's extremely rare[1] for the padding to be zero in *all* components, hence it seems better to just set it directly rather than creating a temporary variable and checking for the "no padding"-case.
---
[1] In the `tracemonkey.pdf` file that only happens with `0.08%` of all text elements.
This patch makes the following changes, to improve these API methods:
- Let `PDFPageProxy.cleanup` return a boolean indicating if clean-up actually happened, since ongoing rendering will block clean-up.
Besides being used in other parts of this patch, it seems that an API user may also be interested in the return value given that clean-up isn't *guaranteed* to happen.
- Let `PDFDocumentProxy.cleanup` return the promise indicating when clean-up is finished.
- Improve the JSDoc comment for `PDFDocumentProxy.cleanup` to mention that clean-up is triggered on *both* threads (without going into unnecessary specifics regarding what *exactly* said data actually is).
Add a note in the JSDoc comment about not calling this method when rendering is ongoing.
- Change `WorkerTransport.startCleanup` to throw an `Error` if it's called when rendering is ongoing, to prevent rendering from breaking.
Please note that this won't stop *worker-thread* clean-up from happening (since there's no general "something is rendering"-flag), however I'm not sure if that's really a problem; but please don't quote me on that :-)
All of the caches that's being cleared in `Catalog.cleanup`, on the worker-thread, *should* be re-filled automatically even if cleared *during* parsing/rendering, and the only thing that probably happens is that e.g. font data would have to be re-parsed.
On the main-thread, on the other hand, clearing the caches is more-or-less guaranteed to cause rendering errors, since the rendering code in `src/display/canvas.js` isn't able to re-request any image/font data that's suddenly being pulled out from under it.
- Last, but not least, add a couple of basic unit-tests for the clean-up functionality.
This should hopefully be useful in environments where restrictive CSPs are in effect.
In most cases the replacement is entirely straighforward, and there's only a couple of special cases:
- For the `src/display/font_loader.js` and `web/pdf_outline_viewer.js `cases, since the elements aren't appended to the document yet, it shouldn't matter if the style properties are set one-by-one rather than all at once.
- For the `web/debugger.js` case, there's really no need to set the `padding` inline at all and the definition was simply moved to `web/viewer.css` instead.
*Please note:* There's still *a single* case left, in `web/toolbar.js` for setting the width of the zoom dropdown, which is left intact for now.
The reasons are that this particular case shouldn't matter for users of the general PDF.js library, and that it'd make a lot more sense to just try and re-factor that very old code anyway (thus fixing the `setAttribute` usage in the process).
Based on the PDF spec, with `v` operator, current point should be used as the first control point of the curve.
Do not overwrite current point before an SVG curve is built, so it can b actually used as first control point.
In the current `AnnotationLayer` implementation, Popup annotations require that the parent annotation have already been rendered (otherwise they're simply ignored).
Usually the annotations are ordered, in the `/Annots` array, in such a way that this isn't a problem, however there's obviously no guarantee that all PDF generators actually do so. Hence we simply ensure, when rendering the `AnnotationLayer`, that the Popup annotations are handled last.
Interestingly the viewer already seem to work correctly as-is, with workers disabled and a non-standard `verbosity` level.
Hence this is possibly Node.js specific, but given that the issue is lacking *both* the PDF file in question and a runnable test-case, so this patch is essentially a best-effort guess at what the problem could be.
This covers cases that the `--fix` command couldn't deal with, and in a few cases (notably `src/core/jbig2.js`) the code was changed to use block-scoped variables instead.
Please find additional details about the ESLint rule at https://eslint.org/docs/rules/prefer-const
With the recent introduction of Prettier this sort of mass enabling of ESLint rules becomes a lot easier, since the code will be automatically reformatted as necessary to account for e.g. changed line lengths.
Note that this patch is generated automatically, by using the ESLint `--fix` argument, and will thus require some additional clean-up (which is done separately).
This removes a couple of, thanks to preceeding code, unnecessary `typeof PDFJSDev` checks, and also fixes a couple of incorrectly implemented (my fault) checks intended for `TESTING` builds.
After PR 9566, which removed all of the old Firefox extension code, the `FIREFOX` build flag is no longer used for anything.
It thus seems to me that it should be removed, for a couple of reasons:
- It's simply dead code now, which only serves to add confusion when looking at the `PDFJSDev` calls.
- It used to be that `MOZCENTRAL` and `FIREFOX` was *almost* always used together. However, ever since PR 9566 there's obviously been no effort put into keeping the `FIREFOX` build flags up to date.
- In the event that a new, Webextension based, Firefox addon is created in the future you'd still need to audit all `MOZCENTRAL` (and possibly `CHROME`) build flags to see what'd make sense for the addon.
This particular JSDoc comment is fairly old and it also contains some now unrelated/confusing information.
The only way to *guarantee* that the PDF.js library works as expected is to correctly set the global `workerSrc`[1], hence giving the impression that the option isn't strictly necessary is thus incorrect.
---
[1] Since advertising the fallbackWorkerSrc functionality definitely seems like the *wrong* thing to do.
This rule is already enabled in mozilla-central, and helps avoid some confusing formatting, see https://searchfox.org/mozilla-central/rev/9e45d74b956be046e5021a746b0c8912f1c27318/tools/lint/eslint/eslint-plugin-mozilla/lib/configs/recommended.js#209-210
With the recent introduction of Prettier some of the existing nested ternary statements became even more difficult to read, since any possibly helpful indentation was removed.
This particular ESLint rule wasn't entirely straightforward to enable, and I do recognize that there's a certain amount of subjectivity in the changes being made. Generally, the changes in this patch fall into three categories:
- Cases where a value is only clamped to a certain range (the easiest ones to update).
- Cases where the values involved are "simple", such as Numbers and Strings, which are re-factored to initialize the variable with the *default* value and only update it when necessary by using `if`/`else if` statements.
- Cases with more complex and/or larger values, such as TypedArrays, which are re-factored to let the variable be (implicitly) undefined and where all values are then set through `if`/`else if`/`else` statements.
Please find additional details about the ESLint rule at https://eslint.org/docs/rules/no-nested-ternary
In order to eventually get rid of SystemJS and start using native `import`s instead, we'll need to provide "complete" file identifiers since otherwise there'll be MIME type errors when attempting to use `import`.
This patch makes the follow changes:
- Remove no longer necessary inline `// eslint-disable-...` comments.
- Fix `// eslint-disable-...` comments that Prettier moved down, thus causing new linting errors.
- Concatenate strings which now fit on just one line.
- Fix comments that are now too long.
- Finally, and most importantly, adjust comments that Prettier moved down, since the new positions often is confusing or outright wrong.
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
There's a fair number of (primarily) `Array`s/`TypedArray`s whose formatting we don't want disturb, since in many cases that would lead to the code becoming much more difficult to read and/or break existing inline comments.
*Please note:* It may be a good idea to look through these cases individually, and possibly re-write some of the them (especially the `String` ones) to reduce the need for all of these ignore commands.
Since bundlers, such as Webpack, cannot be told to leave `require` statements alone we are thus forced to jump through hoops in order to prevent these warnings in third-party deployments of the PDF.js library; please see [Webpack issue 8826](https://github.com/webpack/webpack) and libraries such as [require-fool-webpack](https://github.com/sindresorhus/require-fool-webpack).
*Please note:* This is based on the assumption that code running in Node.js won't ever be affected by e.g. Content Security Policies that prevent use of `eval`. If that ever occurs, we should revert to a normal `require` statement and simply document the Webpack warnings instead.
This patch reduces some duplication, by moving *all* fake worker loader code into the `setupFakeWorkerGlobal` function. Furthermore, the functions are simplified further by using `async`/`await` where appropriate.
There's no particularily good reason, as far as I can tell, to not support a custom worker path in Node.js environments (even if workers aren't supported). This patch thus make the Node.js fake worker loader code-path consistent with the fallback code-path used with *browser* fake worker loader.
Finally, this patch also deprecates[1] the `fallbackWorkerSrc` functionality, except in Node.js, since the user should *always* provide correct worker options since the fallback is nothing more than a best-effort solution.
---
[1] Although it probably shouldn't be removed until the next major version.
For performance reasons, and to avoid hanging the browser UI, the PDF.js library should *always* be used with web workers enabled.
At this point in time all of the supported browsers should have proper worker support, and Node.js is thus the only environment where workers aren't supported. Hence it no longer seems relevant/necessary to provide, by default, fake worker loaders for various JS builders/bundlers/frameworks in the PDF.js code itself.[1]
In order to simplify things, the fake worker loader code is thus simplified to now *only* support Node.js usage respectively "normal" browser usage out-of-the-box.[2]
*Please note:* The officially intended way of using the PDF.js library is with workers enabled, which can be done by setting `GlobalWorkerOptions.workerSrc`, `GlobalWorkerOptions.workerPort`, or manually providing a `PDFWorker` instance when calling `getDocument`.
---
[1] Note that it's still possible to *manually* disable workers, simply my manually loading the built `pdf.worker.js` file into the (current) global scope, however this's mostly intended for testing/debugging purposes.
[2] Unfortunately some bundlers such as Webpack, when used with third-party deployments of the PDF.js library, will start to print `Critical dependency: ...` warnings when run against the built `pdf.js` file from this patch. The reason is that despite the `require` calls being protected by *runtime* `isNodeJS` checks, it's not possible to simply tell Webpack to just ignore the `require`; please see [Webpack issue 8826](https://github.com/webpack/webpack) and libraries such as [require-fool-webpack](https://github.com/sindresorhus/require-fool-webpack).
Note that most (reasonably) modern browsers have supported this for a while now, see https://developer.mozilla.org/en-US/docs/Web/API/ReadableStream#Browser_compatibility
By moving the polyfill into `src/shared/compatibility.js` we can thus get rid of the need to manually export/import `ReadableStream` and simply use it directly instead.
The only change here which *could* possibly lead to a difference in behavior is in the `isFetchSupported` function. Previously we attempted to check for the existence of a global `ReadableStream` implementation, which could now pass (assuming obviously that the preceding checks also succeeded).
However I'm not sure if that's a problem, since the previous check only confirmed the existence of a native `ReadableStream` implementation and not that it actually worked correctly. Finally it *could* just as well have been a globally registered polyfill from an application embedding the PDF.js library.
For Popup annotation trigger elements consisting of an arbitrary polyline, you need to ensure that the 'stroke-width' is always non-zero since otherwise it's impossible to actually open/close the popup.
Unfortunately I don't believe that any of the test-suites can be used to test this, hence why no tests are included in the patch.
For certain canvas-related errors (and probably others), the browser rendering exceptions may be propagated "as-is" to the PDF.js code. In this case, the exceptions are of the somewhat cryptic `NS_ERROR_FAILURE` type.
Unfortunately these aren't actual `Error`s, which thus ends up unintentionally triggering the `assert` in `PDFPageProxy._abortOperatorList`; sorry about that!
I happened to look at this code and the way that the link target is set seems unecessarily convoluted, since we're using `Object.values` and `Array.prototype.includes` for *every* link being parsed.
Given that the number of link targets are so few, the easist solution honestly seem to be to just use a `switch` statement to do the link target mapping.
The code in question is *only* relevant in non-`PRODUCTION` mode, i.e. the *development* version of the viewer run with `gulp server`, and has been completely unused at least since SystemJS was added.
I really cannot see any reason to keep this, since it's code which first of all isn't shipping and secondly isn't even being used in the development viewer.
This argument is a left-over from older API code, where we unconditionally initialized `StatTimer` instances for every page. For quite some time that's only been done when `pdfBug` is set, hence it seems unnecessary to keep this functionality.
Even though the currect situation only results in six unnecessary function calls per page, it nonetheless seems completely unnecessary to call dummy functions when `pdfBug` is *not* set (i.e. the default behaviour).
As can be seen in the API, there's a number of document loading Exception handlers which are both really simple and highly similar. Hence these are changed such that all the relevant Exceptions are sent via *one* message instead.
Furthermore, the patch also avoids unnecessarily re-creating `UnknownErrorException`s at the worker side and removes an unnecessary `bind` call.
Sometimes we also used `@return`, but `@returns` is what the JSDoc
documentation recommends. Even though `@return` works as an alias, it's
good to use the recommended syntax and to be consistent within the
project.
Sometimes we also used `@return` or `@returns`, but `@type` is what
the JSDoc documentation recommends. This also improves the documentation
because before this commit the types were not shown and now they are.
All of these methods have been marked as `deprecated` in *three* releases now, and I'd thus like to (slowly) move towards complete removal.
However rather than just removing the methods right away, which would cause somewhat cryptic failures, this patch tries to implement a hopefully reasonable middle ground by throwing `Error`s with (essentially) the same information as the previous warnings.
While the previous `deprecated` messages could perhaps be seen as optional, with these changes API consumers will now be forced to actually migrate their code.
By utilizing a base "class", things become significantly simpler. Unfortunately the new `BaseException` cannot be a proper ES6 class and just extend `Error`, since the SystemJS dependency doesn't seem to play well with that.
Note also that we (generally) need to keep the `name` property on the actual `...Exception` object, rather than on its prototype, since the property will otherwise be dropped during the structured cloning used with `postMessage`.
By default, i.e. with workers enabled, it's *purposely* not possible to send `Dict`s and `Stream`s from the worker-thread. This is achieved by defining a `function` on every `Dict` instance, since that ensures that [the structured clone algoritm](https://developer.mozilla.org/en-US/docs/Web/API/Web_Workers_API/Structured_clone_algorithm) will throw an Error on `postMessage`.
However, with workers *disabled* we fall-back to the `LoopbackPort` implementation which just ignores any `function`s, thus incorrectly allowing sending of data which *should* be unclonable.
With this patch we're finally able to abort worker-thread parsing of the `OperatorList`, rather than *only* aborting the main-thread rendering itself, when the `RenderTask.cancel` method is being called.
This will help improve perceived performance in the default viewer, especially when reading longer and more complex documents, since pages that've been scrolled out-of-view (and thus evicted from the cache) will no longer compete for parsing resources on the worker-thread.
*Please note:* With the implementation in this patch we're *not* aborting worker-thread parsing immediately on `RenderTask.cancel`, since that would lead to *worse* performance in many cases. For example: When zoom/rotation occurs in the viewer, while parsing/rendering is still ongoing, a `cancel` call will usually be (almost) immediately folled by a new `PDFPageProxy.render` call. In that case you obviously don't want to abort parsing on the worker-thread, since that would risk throwing away a partially parsed `OperatorList` and thus force unnecessary re-parsing which will regress perceived performance (especially for more complex documents).
When choosing a reasonable delay, before cancelling `getOperatorList` on the worker-thread when `RenderTask.cancel` is called, two different positions need to be considered:
1. The delay needs to be short enough, since a timeout in the multiple seconds range would essentially make this entire functionality meaningless (by always allowing most/all pages enough time to finish parsing).
2. The delay cannot be *too* short, since that would actually *reduce* performance in the zoom/rotation case outlined above. Furthermore, the time between `RenderTask.cancel` and `PDFPageProxy.render` calls will obviously be affected by both general computer performance and current CPU load.
It's certainly possible that the timeout may require some further tweaks, however the value settled on in this patch was easily *one order* of magnitude larger than the delta between cancel/render in my tests.
There's no good reason for calling this helper function without a `url` parameter, and this way we can prevent that from happening.
Note how the `PDFOutlineViewer` call-site was already doing the right thing here, and only the `LinkAnnotationElement` call-site needed a small adjustment to make it work.
With the changes made in PR 11069, it's no longer necessary to include the `pageIndex`/`intent` parameters when sending 'GetOperatorList' data. In the previous implementation these properties were used to associate the `OperatorList` with the correct `RenderTask`, however now that `ReadableStream`s are used that's handled automatically and it's thus dead code at this point.
By transfering, rather than copying, `ArrayBuffer`s between the main- and worker-threads, you can avoid unnecessary allocations by only having *one* copy of the same data.
Hence manually setting `postMessageTransfers: false`, when calling `getDocument`, is a performance footgun[1] which will do nothing but waste memory.
Given that every reasonably modern browser supports `postMessage` transfers[2], I really don't see why it should be possible to force-disable this functionality.
Looking at the browser support, for `postMessage` transfers[2], it's highly unlikely that PDF.js is even usable in browsers without it. However, the feature testing of `postMessage` transfers is kept for the time being just to err on the safe side.
---
[1] This is somewhat similar to the, now removed, `disableWorker` parameter which also provided API users a much too simple way of reducing performance.
[2] See e.g. https://developer.mozilla.org/en-US/docs/Web/API/MessagePort/postMessage#Browser_compatibility and https://developer.mozilla.org/en-US/docs/Web/API/Transferable#Browser_compatibility
Note how the sent values have inconsistent types, with a boolean in one case and an object in the other (normal) case.
Furthermore, explicitly sending a `supportTypedArray: true` property seems superfluous at least to me.
It recently occurred to me that the CMap data should be an excellent candidate for transfering.
This will help reduce peak memory usage for PDF documents using CMaps, since transfering of data avoids duplicating it on both the main- and worker-threads.
Unfortunately it's not possible to actually transfer data when *returning* data through `sendWithPromise`, and another solution had to be used.
Initially I looked at using one message for requesting the data, and another message for returning the actual CMap data. While that should have worked, it would have meant adding a lot more complexity particularly on the worker-thread.
Hence the simplest solution, at least in my opinion, is to utilize `sendWithStream` since that makes it *really* easy to transfer the CMap data. (This required PR 11115 to land first, since otherwise CMap fetch errors won't propagate correctly to the worker-thread.)
Please note that the patch *purposely* only changes the API to Worker communication, and not the API *itself* since changing the interface of `CMapReaderFactory` would be a breaking change.
Furthermore, given the relatively small size of the `.bcmap` files (the largest one is smaller than the default range-request size) streaming doesn't really seem necessary either.
At this point in time it's easy to convert the `MessageHandler.on` call-sites to use arrow functions, and thus let the JavaScript engine handle scopes for us, rather than having to manually keep references to the relevant scopes in `MessageHandler`.[1]
An additional benefit of this is that a couple of `Function.prototype.call()` instances can now be converted into "normal" function calls, which should be a tiny bit more efficient.
All in all, I don't see any compelling reason why it'd be necessary to keep supporting custom `scope`s in the `MessageHandler` implementation.
---
[1] In the event that a custom scope is ever needed, simply using `bind` on the handler function when calling `MessageHandler.on` ought to work as well.
One of the motivations for using `setAttribute` in the first place was to support more efficient DOM updates in the `expandTextDivs` method, since performance of the `enhanceTextSelection` mode can be somewhat bad when there's a lot of `textDivs` on the page.
With recent `TextLayer` changes/optimizations it's no longer necessary to store a complete `style`-string for every `textDiv`, and we can thus re-visit the `setAttribute` usage.
Note that with the current code, in `appendText`, there's only *one* string per `textDiv` which avoids a bunch of temporary strings. While the changes in this patch means that there's now *three* strings per `textDiv` instead, the total length of these strings are now quite a bit shorter (42 characters to be exact).
*This should obviously have been done in PR 11097, but for some reason I completely overlooked it; sorry about that.*
There's no good reason to update the font unless you're actually going to measure the width of the textContent. This can reduce unnecessary font switching a fair bit, even for documents which are somewhat simple/short (in e.g. the `tracemonkey.pdf` file this cuts the amount of font switches almost in half).
For performance reasons single-char text divs aren't being scaled, as outlined in a comment in `appendText`. Hence it doesn't seem necessary, or even a good idea, to unconditionally measuring the width of the text in `_layoutText`.
*Please note:* The majority of this patch was written by Yury, and it's simply been rebased and slightly extended to prevent issues when dealing with `RenderingCancelledException`.
By leveraging streams this (finally) provides a simple way in which parsing can be aborted on the worker-thread, which will ultimately help save resources.
With this patch worker-thread parsing will *only* be aborted when the document is destroyed, and not when rendering is cancelled. There's a couple of reasons for this:
- The API currently expects the *entire* OperatorList to be extracted, or an Error to occur, once it's been started. Hence additional re-factoring/re-writing of the API code will be necessary to properly support cancelling and re-starting of OperatorList parsing in cases where the `lastChunk` hasn't yet been seen.
- Even with the above addressed, immediately cancelling when encountering a `RenderingCancelledException` will lead to worse performance in e.g. the default viewer. When zooming and/or rotation of the document occurs it's very likely that `cancel` will be (almost) immediately followed by a new `render` call. In that case you'd obviously *not* want to abort parsing on the worker-thread, since then you'd risk throwing away a partially parsed Page and thus be forced to re-parse it again which will regress perceived performance.
- This patch is already *somewhat* risky, given that it touches fundamentally important/critical code, and trying to keep it somewhat small should hopefully reduce the risk of regressions (and simplify reviewing as well).
Time permitting, once this has landed and been in Nightly for awhile, I'll try to work on the remaining points outlined above.
Co-Authored-By: Yury Delendik <ydelendik@mozilla.com>
Co-Authored-By: Jonas Jenwald <jonas.jenwald@gmail.com>
Furthermore, it's possible to re-use the same Array for all `textDiv`s on the page and the resulting padding string also becomes a lot more compact.
Please note that the `paddingLeft` branch was moved, since the padding values need to be ordered as `top, right, bottom, left`.
Finally, with this re-factoring it's no longer necessary to cache the original `style` string for every `textDiv` when `enhanceTextSelection` is enabled.
Given that browsers will reject padding values smaller than zero (which may be caused by limited numerical precision during calculations in the `expand` code), it makes no sense to include those when expanding the `textDiv`s.
With the changes to the `StreamType`/`FontType` "enums" in PR 11029, one unfortunate result is that `getStats` now *always* returns empty Arrays. Something that everyone, myself included, apparently missed is that you obviously cannot index an Array with Strings :-)
I wrongly assumed that the unit-tests would catch any bugs, but they apparently suffered from the same issue as the code in `src/core/`.
Another possible option could perhaps be to use `Set`s, rather than objects, but that will require larger changes since `LoopbackPort` (in `src/display/api.js`) doesn't support them.
There's a number of spots in the current code, and tests, where `cancel` methods are not called with appropriate arguments (leading to Promises not being rejected with Errors as intended).
In some cases the cancel `reason` is implicitly set to `undefined`, and in others the cancel `reason` is just a plain String. To address this inconsistency, the patch changes things such that cancelling is done with `AbortException`s everywhere instead.
Note that, in the old code, there was a code-path which could prevent this from happening thus affecting future cleanup.
Furthermore, ensure that we'll always attempt to cleanup when handling the 'PageError' message, similar to the code in e.g. the `PDFPageProxy._renderPageChunk` method.
The `receivingOperatorList` property is currently tracked *twice* in the rendering code, both directly and inversely through the `intentState.operatorList.lastChunk` boolean. This type of double bookkeeping is never a good idea, since it's just too easy for the properties to accidentally fall out of sync.
In this case there's even a `cleanup`-related bug caused by this, which means that `PDFPageProxy._tryCleanup` will never be able to discard any data if there's an error on the worker-thread (as handled through the 'PageError' message).
Hence the simplest solution seems, at least to me, to update `PDFPageProxy._tryCleanup` to replace the `intentState.receivingOperatorList` check with a `!intentState.operatorList.lastChunk` check and completely remove the former property.
Given that `cleanupAfterRender` is already set for large images, when handling 'obj' messages, this patch *should* thus be safe in general (since otherwise there ought be existing bugs related to cleanup and printing).
Calling `someArray = []` will create a new Array, which seems completely unnecessary when it's sufficient to just call `someArray.length = 0` to achieve the same effect.
Even though I cannot imagine these particular cases having any noticeable performance impact, similar changes were made in `core/` code years ago since it's apparently more efficient memory wise.
This includes the information in the core and display layers. The
date parsing logic from the document properties is rewritten according
to the specification and now includes unit tests.
Moreover, missing unit tests for the color of a popup annotation have
been added.
Finally the styling of the popup is changed slightly to make the text a
bit smaller (it's currently quite large in comparison to other viewers)
and to make the drop shadow a bit more subtle. The former is done to be
able to easily include the modification date in the popup similar to how
other viewers do this.
While PR 10714 did address the `disableRange=true` case, it also managed to "break" the `disableStream=true` case instead since the indeterminate loadingBar is now displayed when it shouldn't; sorry about that!
The solution is simple enough though, don't attempt to fallback to `_fullRequestReader.onProgress` when handling "incomplete" loading information.
Please see the specification, https://www.adobe.com/content/dam/acom/en/devnet/acrobat/pdfs/PDF32000_2008.pdf#M11.9.12864.1Heading.71.Viewer.Preferences
Furthermore, note that this patch *only* adds API support and unit-tests but does not attempt to integrate e.g. the `ViewerPreferences -> Direction` property into the viewer (which would be necessary to address issue 10736).
The reason for this is that it's not entirely clear to me exactly if/how that could be implemented; e.g. would it be as simple as setting the `dir` attribute on the `viewerContainer` DOM element, or will it be more complicated?
There's also the question of how the `ViewerPreferences -> Direction` value interacts with the `PageMode`, and this will generally require a fair bit of manual testing. Since the direction of the *entire* viewer depends on the browser locale, there's also a somewhat open question regarding what default value to use for different locales.
Finally, if the viewer supports `ViewerPreferences -> Direction` then I'm assuming that it will be necessary to allow users to override the default value, which will require (most likely) new `SecondaryToolbar` buttons and icons for those etc.
Hence this patch only lays the necessary foundation for eventually addressing issue 10736, but defers the actual implementation until later. (Time permitting, I'll try to look into the viewer part later.)
*Please note:* This patch purposely ignores `src/display/network.js`, since its support for progressive reading depends on the non-standard `moz-chunked-arraybuffer` responseType which is currently in the process of being removed.
The file `test/pdfs/annotation-caret-ink.pdf` is already available in
the repository as a reference test for this since I supplied it for
another patch that implemented ink annotations.
This mirrors the canvas implementation where we ignore these operators.
This avoids console spam regarding unimplemented operators we're not
interested in.
For the Tracemonkey paper, we're now down to one warning about tiling
patterns which is in fact a valid one.
In particular, this should reduce intermediate string creation by using
template strings and reduce variable lookup times by removing unneeded
variables and caching `this.current` in more places.
With PR 10675 having fixed the completely broken `disableRange=true` setting in the Firefox version of PDF.js, I couldn't help but noticing that loading progress is never reported properly in that case.
Currently loading progress is only reported for the `rangeProgress` chrome-event, which obviously isn't dispatched with `disableRange=true` set. However, the `progressiveRead` chrome-event includes loading progress as well, but this information isn't being used in any way.
Furthermore, the `PDFDataRangeTransport.onDataProgress` method wasn't able to handle "complete" loading information, and neither was `PDFDataTransportStream._onProgress` since that method would only ever attempt to report it through a RangeReader (which won't exist when `disableRange=true` is set).
Note how at https://mozilla.github.io/pdf.js/api/ it's being described as API docs, however `src/core/annotation.js` is not part of the public API.
Furthermore, given that the code residing in the `src/core/` folder is run in a worker-thread, it's not even accessible on the main-thread (since `postMessage` is being used to transfer the data).
Hence the different API methods simply returns a "proxy" to the underlying data, but not actually the same objects and data structures as in the worker-thread itself; thus it doesn't make a whole lot of sense to expose this in API docs as far as I'm concerned.
Finally, the patch fixes a small JSDoc related typo in `src/display/api.js` when referring to the `TextStyle` typedef.
The `moz-chunked-arraybuffer` responseType is a non-standard property, which has been subsumed by the Fetch API, and it's in the process of being removed from Firefox; please see https://bugzilla.mozilla.org/show_bug.cgi?id=1120171 and https://bugzilla.mozilla.org/show_bug.cgi?id=1411865
*Please note:* Rather than waiting for both `Fetch` *and* `ReadableStream` to be available in e.g. a Firefox ESR version (which is probably going to be 68 at the earliest), let's just decide that PDF.js release `2.1.266` will be the last one with `moz-chunked-arraybuffer` support and land this patch (since nothing should outright break without it anyway).
This transform resulted in an incorrectly positioned object when the
bounding box's upper-left corner did not start at (0,0), because
the translation was not reverted. This patch adds the missing transform.
The test file (tiling-pattern-box.pdf) is based on the PDF from #2825.
All but the first cube (including the PDF data) have been removed.
To trigger the bug that is fixed by this commit, I changed the BBox of
the first pattern from "[ 0 0 596 842]" to "[90 0 596 842]". Without
this patch, the dashed vertical line that intersects the corners at A
and E would disappear.
The new test file (tiling-pattern-large-steps.pdf) was manually created,
to have the following characteristics:
- Large xstep and ystep (90000)
- Page width is 4000 (which is larger than MAX_PATTERN_SIZE)
- Visually, the page consists of a red rectangle with a black border,
surrounded by a 50 unit white padding.
- Before patch: blurry; After patch: sharp
Fixes#6496Fixes#5698Fixes#1434Fixes#2825
Currently if trying to set `disableRange=true` in the built-in PDF Viewer in Firefox, either through `about:config` or via the URL hash, the PDF document will never load. It appears that this has been broken for a couple of years, without anyone noticing.
Obviously it's not a good idea to set `disableRange=true`, however it seems that this bug affects the PDF Viewer in Firefox even with default settings:
- In the case where `initialData` already contains the *entire* file, we're forced to dispatch a range request to re-fetch already available data just so that file loading may complete.
- (In the case where the data arrives, via streaming, before being specifically requested through `requestDataRange`, we're also forced to re-fetch data unnecessarily.) *This part was removed, to reduce the scope/risk of the patch somewhat.*
In the cases outlined above, we're having to re-fetch already available data thus potentially delaying loading/rendering of PDF files in Firefox (and wasting resources in the process).
This will further help reduce the amount of image data that's currently being held alive, by explicitly removing the `src` attribute.
Please note that this is mostly relevant for browsers which do not support `URL.createObjectURL`, or where `disableCreateObjectURL` was manually set by the user, since `blob:` URLs will be revoked (see the previous patch).
However, using `about:memory` (in Firefox) it does seem that this may also be generally helpful, given that calling `URL.revokeObjectURL` won't invalidate the image data itself (as far as I can tell).
Natively supported JPEG images are sent as-is, using a `blob:` or possibly a `data` URL, to the main-thread for loading/decoding.
However there's currently no attempt at releasing these resources, which are held alive by `blob:` URLs, which seems unfortunately given that images can be arbitrarily large.
As mentioned in https://developer.mozilla.org/en-US/docs/Web/API/URL/createObjectURL the lifetime of these URLs are tied to the document, hence they are not being removed when a page is cleaned-up/destroyed (e.g. when being removed from the `PDFPageViewBuffer` in the viewer).
This is easy to test with the help of `about:memory` (in Firefox), which clearly shows the number of `blob:` URLs becomming arbitrarily large *without* this patch. With this patch however the `blob:` URLs are immediately release upon clean-up as expected, and the memory consumption should thus be considerably reduced for long documents with (simple) JPEG images.
Note how `PDFDocumentProxy.destroy` is a nothing more than an alias for `PDFDocumentLoadingTask.destroy`. While removing the latter method would be a breaking API change, there's still room for at least some clean-up here.
The main changes in this patch are:
- Stop providing a `PDFDocumentLoadingTask` instance *separately* when creating a `PDFDocumentProxy`, since the loadingTask is already available through the `WorkerTransport` instance.
- Stop tracking the `PDFDocumentProxy` instance on the `WorkerTransport`, since that property is completely unused.
- Simplify the 'Multiple `getDocument` instances' unit-tests by only destroying *once*, rather than twice, for each document.
Given that the function is (purposely) independent of the verbosity level and that its message is worded to only apply on the main-thread, there's no reason to duplicate this across the built `pdf.js`/`pdf.worker.js` files.
Currently for every single parsed/rendered page there's no less than *four* `Date.now()` calls being made on the worker-side. This seems totally unnecessary, since the result of these calls are, by default, not used for anything *unless* the verbosity level is set to `INFO`.
The default size of these canvases seem to be `300 x 150` (two orders of magnitude larger than the ones in PR 10597), which probably is sufficient enough to matter since there's one such canvas for each textLayer that's rendered in the viewer.
Also fixes the incorrect rejection reason, i.e. one using a string rather than an `Error`, in the `TextLayerRenderTask.cancel` method.
While this particular canvas may be small, there can still be an arbitrarily large number of them (one per page rendered), which can/will eventually add up memory wise. This can be easily avoided by using the `cachedCanvases` abstraction instead, which will ensure that the `isFontSubpixelAAEnabled` canvas is removed together with other temporary canvases in `CanvasGraphics.endDrawing`.
This file (currently) contains not only DOM-specific helper functions/classes, but is used generally for various helper code relevant for main-thread functionality.
*Hopefully this patch makes sense, since I cannot claim to fully understand this function.*
With the changes made in PR 3354 *some* Type3 glyph outlines are no longer rendering correctly, since the final paths were being accidentally ignored.
The fact that Type3 fonts are not very common in PDF documents, and that most Type3 glyphs are unaffected by this regression, probably explains why this has gone unnoticed since 2013.
After PR 9340 all glyphs are now re-mapped to a Private Use Area (PUA) which means that if a font fails to load, for whatever reason[1], all glyphs in the font will now render as Unicode glyph outlines.
This obviously doesn't look good, to say the least, and might be seen as a "regression" since previously many glyphs were left in their original positions which provided a slightly better fallback[2].
Hence this patch, which implements a *general* fallback to the PDF.js built-in font renderer for fonts that fail to load (i.e. are rejected by the sanitizer). One caveat here is that this only works for the Font Loading API, since it's easy to handle errors in that case[3].
The solution implemented in this patch does *not* in any way delay the loading of valid fonts, which was the problem with my previous attempt at a solution, and will only require a bit of extra work/waiting for those fonts that actually fail to load.
*Please note:* This patch doesn't fix any of the underlying PDF.js font conversion bugs that's responsible for creating corrupt font files, however it does *improve* rendering in a number of cases; refer to this possibly incomplete list:
[Bug 1524888](https://bugzilla.mozilla.org/show_bug.cgi?id=1524888)
Issue 10175
Issue 10232
---
[1] Usually because the PDF.js font conversion code wasn't able to parse the font file correctly.
[2] Glyphs fell back to some default font, which while not accurate was more useful than the current state.
[3] Furthermore I'm not sure how to implement this generally, assuming that's even possible, and don't really have time/interest to look into it either.
- The only existing call-site, of this method, is never passing more than *one* font at a time anyway.
- As far as I can remember, this functionality has never actually been used (caveat: I didn't check the git history).
- This allows simplification of the method, especially by making use of the fact that it's now asynchronous.
- It should be just as easy to call `BaseFontLoader.bind` from within a loop, rather than having the loop in the method itself.
Currently all fonts are using the `_queueLoadingCallback` method to determine when they have been loaded[1]. However in most cases this is just adding unnecessary overhead, especially with `BaseFontLoader.bind` now being asynchronous, given how fonts are loaded:
- For fonts loaded using the Font Loading API, it's already possible to easily tell when a font has been loaded simply by checking the `loaded` promise on the FontFace object itself.
- For browsers, e.g. Firefox, which support synchronous font loading it's already assumed that fonts are immediately available.
Hence the `_queueLoadingCallback` method is moved into the `GenericFontLoader`, such that it's only utilized for fonts which are loaded using CSS.
---
[1] In the "fonts loaded using CSS" case, this is already a hack anyway as outlined in the comments.
This polyfill is currently used in only *one* file, i.e. `src/display/api.js`, and only when trying to build a *fallback* `workerSrc` path.
Given that the global `workerSrc` should *always* be set[1] when using the PDF.js library[2], and that the fallback `workerSrc` should only be regarded as a best-effort solution anyway, there isn't a particularily strong reason to keep the compatibility code in my opinion.
---
[1] Other supported options include setting the global `workerPort`, or passing in a `PDFWorker` instance as part of the `getDocument` call.
[2] Which is clearly mentioned in the JSDocs in `src/display/worker_options.js`.
This piggybacks of the existing `cancel` functionality, to ensure that any pending operations are closed *and* that any temporary canvases are actually being removed.
Also simplifies `finishPaintTask` in `PDFPageView.draw` slightly, by converting it to an async function.
This will allow the Metadata to be successfully extracted from the PDF file in issue 10395.
Furthermore, this patch also fixes a bug in `Metadata.get` which causes the method to return `null` rather than an empty string or zero (since either ought to be allowed).
The error was triggered for a particular set of metadata, where an end tag was encountered without the corresponding begin tag being present in the data.
(The patch also fixes a minor oversight, from a recent PR, in the `SimpleDOMNode.nextSibling` method.)
Given that the issue, as filed, is incomplete since no PDF file was provided for debugging, this patch is really the best that we can do here. *Please note:* This patch will *not* enable the Metadata to be successfully parsed, but it should at least prevent the errors.
This method creates quite a few intermediate strings on each call and
it's called often, even for smaller documents like the Tracemonkey
document. Scrolling from top to bottom in that document resulted in
14126 strings being created in this method. With this commit applied,
this is reduced to 2018 strings.
This method creates quite a few intermediate strings on each call and
it's called often, even for smaller documents like the Tracemonkey
document. Scrolling from top to bottom in that document resulted in
12936 strings being created in this method. With this commit applied,
this is reduced to 3610 strings.
If, as PR 10368 suggests, more parameters should be added to `getViewport` I think that it would be a mistake to not change the signature *first* to avoid needlessly unwieldy call-sites.
To not break any existing code and third-party use-cases, this is obviously implemented with a deprecation warning *and* with a working fallback[1] for the old method signature.
---
[1] This is limited to `GENERIC` builds, which should be sufficient.
Note that the OpenAction dictionary may contain other information besides just a destination array, e.g. instructions for auto-printing[1].
Given first of all that an arbitrary `Dict` cannot be sent from the Worker (since cloning would fail), and second of all that the data obviously needs to be validated, this patch purposely only adds support for fetching a destination from the OpenAction entry[2].
---
[1] This information is, currently in PDF.js, being included through the `getJavaScript` API method.
[2] This significantly reduces the complexity of the implementation, which seems fine for now. If there's ever need for other kinds of OpenAction to be fetched, additional API methods could/should be implemented as necessary (could e.g. follow the `getOpenActionWhatever` naming scheme).
This changes all occurrences of `var` to `let`/`const` in this code, and updates the signature of the constructor to use object destructuring for better readability (and self documentation).
Also, `useRequestAnimationFrame` is changed to a parameter and the `typeof window` check is now done *once* rather than at every `_scheduleNext` call.
This changes all occurrences of `var` to `let`/`const` in this code, and updates the signatures of a couple of methods to use object destructuring.
Finally, when creating `InternalRenderTask` instances *only* the necessary parameter are now provided, since passing through the `RenderParameters` as-is seems completely unnecessary.
First of all, note how there's currently *two* methods for checking if a certain object exists, which seems completely unwarranted.
Furthermore, the rarely used `getData` method was removed and its only callsite changed to use a combination of `PDFObjects.{has, get}` instead.
Finally, the methods were rearranged slightly, to bring the most important ones (for an API user) to the top of the class.
Note how nowhere in the code `canvasInRendering.get()` is ever called, and that this structure is really only used to store references to `<canvas>` DOM elements.
The reason for this being a `WeakMap` is probably because at the time we weren't using `core-js` polyfills yet, and since there already existed a manually implemented `WeakMap` polyfill it was probably simpler to use that.
Please note that, given the lack of a runnable example, I'm not totally sure if this first of all is enough to *completely* address the issue as filed and second of all if we actually want this new behaviour.
*Please note:* I'm totally fine with this patch being rejected, and the issue closed as WONTFIX; however these changes should address the issue if that's desired.
From a conceptual point of view, reporting loading progress doesn't really make a lot of sense for PDF files opened by passing raw binary data directly to `getDocument` (since obviously *all* data was loaded).
This is compared to PDF files loaded via e.g. `XMLHttpRequest` or the Fetch API, where the entire PDF file isn't available from the start and knowing the loading progress makes total sense.
However I can certainly see why the current API could be considered inconsistent, which isn't great, since a registered `onProgress` callback will never be called for certain `getDocument` calls.
The simplest solution to this inconsistency thus seem to be to ensure that `onProgress` is always called when handling the `DataLoaded` message, since that will *always* be dispatched[1] from the worker-thread.
---
[1] Note that this isn't guaranteed to happen, since setting `disableAutoFetch = true` often prevents the *entire* file from ever loading. However, this isn't relevant for the issue at hand, and is a well-known consequence of using `disableAutoFetch = true`; note how the default viewer even has a specialized code-path for hiding the loadingBar.
*This should have been part of PR 10139.*
In the event that a user has attempted to manually load the worker file on the main-thread, but somehow failed to do that correctly, there's a possibility that `getMainThreadWorkerMessageHandler` could throw. Considering how/where that helper function is being called, an error could still prevent `PDFDocumentLoadingTask` from completing (regardless if it's being resolved/rejected).
With the way that the `getWorkerSrc()` helper function is implemented now, there's no longer a particularly strong reason for keeping the global `pdfjsFilePath` variable around.
With this patch the fallback `workerSrc` will thus, assuming is wasn't already set, be set to the "pdfjsFilePath" which simplifies the `getWorkerSrc()` function and reduces the amount of global state.
Finally, the global `workerSrc` variable was renamed to prevent shadowing.
This should, hopefully, cover all the possible ways[1] in which "fake workers" are loaded. Given the different code-paths, adding unit-tests might not be that simple.
Note that in order to make this work, the various `fakeWorkerFilesLoader` functions were converted to return `Promises`.
---
[1] Unfortunately there's lots of them, for various build targets and configurations.
This attempts to reduced the level of indirection, and the amount of code, when dispatching `fileattachmentannotation` events, by removing the `PDFLinkService.onFileAttachmentAnnotation` method and just accessing `PDFLinkService.eventBus` directly in the `FileAttachmentAnnotationElement` constructor.
Given that other properties, such as `externalLinkTarget`/`externalLinkRel`, are already being accessed directly this pattern seems fine here as well.
The `started` timestamp is completely usused, and the `end` timestamp is currently[1] being used essentially like a boolean value.
Hence this code can be simplified to use an actual boolean value instead, which avoids potentially hundreds (or even thousands) of unnecessary `Date.now()` calls.
---
[1] Looking briefly at the history of this code, I cannot tell if the timestamps themselves were ever used for anything (except for tracking "boolean" state).
The `Font.loading` property is only ever used *once* in the code, whereas `Font.missingFile` is more widely used. Furthermore the name `loading` feels, at least to me, slight less clear than `missingFile`. Finally, note that these two properties are the inverse of each other.
It's no longer necessary since https://bugzilla.mozilla.org/show_bug.cgi?id=1305963 is fixed quite some time ago.
While we're here, mark the `cachedGetSinglePixelWidth` member as being
private and use ES6 syntax in the `getSinglePixelWidth` method.
For proof-of-concept, this patch converts a couple of `Promise` returning methods to use `async` instead.
Please note that the `generic` build, based on this patch, has been successfully testing in IE11 (i.e. the viewer loads and nothing is obviously broken).
Being able to use modern JavaScript features like `async`/`await` is a huge plus, but there's one (obvious) side-effect: The size of the built files will increase slightly (unless `SKIP_BABEL == true`). That's unavoidable, but seems like a small price to pay in the grand scheme of things.
Finally, note that the `chromium` build target was changed to no longer skip Babel translation, since the Chrome extension still supports version `49` of the browser (where native `async` support isn't available).
With the new XML parser, see PR 9573, the referenced PDF file now causes `getMetadata` to fail when incomplete XML tags are encountered. This provides a simple, and hopefully generally useful, work-around that may also help prevent future bugs.
(Without being able to reproduce nor even understand the other (non XML) errors mentioned in issue 8884, I'd say that this patch is enough to close that one as fixed.)
This moves/exposes the `URL` polyfill similarily to the existing `ReadableStream` polyfill, rather than exposing it globally, to avoid interfering with any "outside" code.
Both the `URL` and `ReadableStream` polyfills are now exposed on the `pdfjsLib` object, such that they are accessible to the viewer components.
Furthermore, the `no-restricted-globals` ESLint rule is also enabled to prevent accidental usage of the native `URL`/`ReadableStream` implementations directly in the `src/` and `web/` folders; see also https://eslint.org/docs/rules/no-restricted-globals
Addresses the remaining TODO in https://github.com/mozilla/pdf.js/projects/6
Currently if `RenderTask.cancel` is called *immediately* after rendering was started, then by the time that `InternalRenderTask.initializeGraphics` is called rendering will already have been cancelled.
However, we're still inserting the canvas into the `canvasInRendering` map, thus breaking any future attempts at re-rendering using the same canvas. Considering that `InternalRenderTask.cancel` always removes the canvas from the map, I cannot imagine that we'd ever want to re-add it *after* rendering was cancelled (it was likely just a simple oversight in PR 8519).
Fixes 9456.
This wasn't included in PR 9245, since all the API options were still global at that time.
Writing the unit-tests also uncovered an issue with `getOperatorList` not starting the "Page Request" timer.
Obviously it's still not possible to render non-embedded fonts as paths, but in this way the rest of the page will at least be allowed to continue rendering.
*Please note:* Including the 14 standard fonts in PDF.js probably wouldn't be *that* difficult to implement. (I'm not a lawyer, but the fonts from PDFium could probably be used given their BSD license.)
However, the main blocker ought to be the total size of the necessary font data, since I cannot imagine people being OK with shipping ~5 MB of (additional) font data with Firefox. (Based on the reactions when the CMap files were added, and those are only ~1 MB in size.)
The built-in image decoders are already using `Uint8ClampedArray` when returning data, and this patch simply extends that to the rest of the image/colorspace code.
As far as I can tell, the only reason for using manual clamping/rounding in the first place was because TypedArrays used to be polyfilled (using regular arrays). And trying to polyfill the native clamping/rounding would probably have been had too much overhead, but given that TypedArray support is required in PDF.js version `2.0` that's no longer a concern.
*Please note:* Because of different rounding behaviour, basically `Math.round` in `Uint8ClampedArray` respectively `Math.floor` in the old code, there will be very slight movement in quite a few existing test-cases. However, the changes should be imperceivable to the naked eye, given that the absolute difference is *at most* `1` for each RGB component when comparing `master` and this patch (see also the updated expectation values in the unit-tests).
Not only is the `Util.loadScript` helper function unused on the Worker side, even trying to use it there would throw an Error (since `document` isn't defined/available in Workers).
Hence this helper function is moved, and its code modernized slightly by having it return a Promise rather than needing a callback function.
Finally, to reduced code duplication, the "new" loadScript function is exported and used in the viewer.
The various classes have `this._errored` and `this._reason` properties, where the first one is a boolean indicating if an error was encountered and the second one contains the actual `Error` (or `null` initially).
In practice this means that errors are basically tracked *twice*, rather than just once. This kind of double-bookkeeping is generally a bad idea, since it's quite easy for the properties to (accidentally) get into an inconsistent state whenever the relevant code is modified.
Rather than using a separate boolean, we can just as well check the "error" property directly (since `null` is falsy).
---
Somewhat unrelated to this patch, but `src/display/node_stream.js` is currently *not* handling errors in a consistent or even correct way; compared with `src/display/network.js` and `src/display/fetch_stream.js`.
Obviously using the `createResponseStatusError` utility function, from `src/display/network_utils.js`, might not make much sense in a Node.js environment. However at the *very* least it seems that `MissingPDFException`, or `UnknownErrorException` when one cannot tell that the PDF file is "missing", should be manually thrown.
As is, the API (i.e. `getDocument`) is not returning the *expected* errors when loading fails in Node.js environments (as evident from the `pending` API unit-test).
This special handling was added in PR 8567, but was made redundant in PR 8721 which stopped sending everything but the kitchen sink to the Worker side.
Since `PDFPageProxy` already provide getters for all the data returned by `GetPage` (in the Worker), there isn't any compelling reason for accessing the `pageInfo` directly on `PDFPageProxy`.
The patch also changes the `GetPage` handler, in `src/core/worker.js`, to use modern JavaScript features.
Since `PDFDocumentProxy` already provide getters for all the data returned by `GetDoc` (in the Worker), there isn't any compelling reason for accessing the `pdfInfo` directly on `PDFDocumentProxy`.
After PR 8617 the `PDFManagerReady` message handler function, in `src/display/api.js`, is now a no-op. Hence it seems completely unnecessary to keep sending this message from `src/core/worker.js`.
With native typed array support now being mandatory in PDF.js, since version 2.0, this probably isn't a huge problem even though the current code seems wrong (it was changed in PR 6571).
Note how in the `!(data instanceof Uint8Array)` case we're currently attempting to send `handler.send('test', 'main', false);` to the main-thread, which doesn't really make any sense since the signature of the method reads `send(actionName, data, transfers) {`.
Hence the data that's *actually* being sent here is `'main'`, with `false` as the transferList, which just seems weird. On the main-thread, this means that we're in this case checking `data && data.supportTypedArray`, where `data` contains the string `'main'` rather than being falsy. Since a string doesn't have a `supportTypedArray` property, that check still fails as expected but it doesn't seem great nonetheless.
Since all the built-in PDF.js image decoders now return their data as `Uint8ClampedArray`, for consistency `JpegDecode` on the main-thread should be doing the same thing; follow-up to PR 8778.
The signature of the `PDFWorker.fromPort` method, in addition to the `PDFWorker` constructor, was changed in PR 9480.
Hence it's probably a good idea to add a bit more validation to `PDFWorker.fromPort`, to ensure that it won't fail silently for an API consumer that updates to version 2.0 of the PDF.js library.
With version 2.0, native support for typed arrays is now a requirement for using the PDF.js library; see PR 9094 where the old polyfills were removed.
Hence the `isTypedArraysPresent` check, when setting up fake workers, no longer serves any purpose here and can thus be removed.
There's no good reason, as far as I can tell, to duplicate the functionality of the `LoopbackPort` in the unit-tests. The only difference between the implementations is that `LoopbackPort` mimics the (native) structured cloning, however that shouldn't matter here since the tests are only sending "simple" data (strings respectively arrays with numbers).
Furthermore the patch also changes `LoopbackPort` to default to using "structured cloning" and deferred invocation of the listeners, since native typed array support is now a requirement for using the PDF.js library.
The `MessageHandler` itself, and its assorted helper functions, are currently the single largest[1] piece of code in the `src/shared/util.js` file. By moving this code into its own file, `src/shared/util.js` thus becomes smaller and more manageable.
The `fontScale` property was added in PR 1531, see commit b312719d7e in particular, apparently for the sole purpose of supporting the "acroforms" example.
However, the `fontScale` property was never used anywhere else in the code-base, and after the modernization of the "acroforms" example in PR 8030 it's been completely unused.
Finally, note that there's also a (more suitably named) `scale` property on `PageViewport` instances, which contains the exact same information as the property being removed here.
I made some mistakes when trying to make the content_disposition.js
compatible with non-modern browsers (IE/Edge).
Notably, text decoding was usually skipped because of the inverted
logical check at the top of `textdecode`.
I verified that this new version works as expected, as follows:
1. Visit 55c71eb44e/test/
and get test-content-disposition.js
also get test-content-disposition.node.js if using Node.js,
or get test-content-disposition.html if you use a browser.
2. Modify `test-content-disposition.node.js` (or the HTML file) and
change `../extension/content-disposition.js` to `PDFJS-content_disposition.js`
3. Copy the `getFilenameFromContentDispositionHeader` function from
`content_disposition.js` (i.e. the file without the trailing exports)
and save it as `PDFJS-content_disposition.js`.
4. Run the tests (`node test-content-disposition.node.js` or by opening
`test-content-disposition.html` in a browser).
5. Confirm that there are no failures: "Finished all tests (0 failures)"
The code has a best-efforts fallback for Microsoft Edge, which lacks the
TextDecoder API. The fallback only supports the common UTF-8 encoding.
To simulate this in a test, modify `PDFJS-content_disposition.js` and
deliberately throw an error before `new TextDecoder`. There will be two
failures because we don't want to include too much code to support text
decoding for non-UTF-8 encodings in Edge
```
test-content-disposition.js:265 Assertion failed: Input: attachment; filename*=ISO-8859-1''%c3%a4
Expected: "ä"
Actual : "ä"
test-content-disposition.js:268 Assertion failed: Input: attachment; filename*=ISO-8859-1''%e2%82%ac
Expected: "€"
Actual : "€"
```
Please note that while the current code works, both in the viewer and the unit-tests, it can leave the `WorkerTransport._passwordCapability` Promise in a pending state.
In the `PasswordRequest` handler, in src/display/api.js, we're returning the Promise from a `capability` object (rather than just a "plain" Promise). While an error thrown anywhere within this handler was fortunately enough to propagate it to the Worker side, it won't cause the Promise (in `WorkerTransport._passwordCapability`) to actually be rejected.
Finally note that while we're now catching errors in the `PasswordRequest` handler, those errors are still propagated to the Worker side via the (now) rejected Promise and the existing `return this._passwordCapability.promise;` line.
This prevents warnings about uncaught Promises, with messages such as "Error: Worker was destroyed during onPassword callback", when running the unit-tests both in browsers *and* in Node.js/Travis.
This should provide a better out-of-the-box experience when using PDF.js in a Node.js environment, since it's missing native support for both `@font-face` and `Image`.
Please note that this change *only* affects the default values, hence it's still possible for an API consumer to override those values when calling `getDocument`.
Also, prevents "ReferenceError: document is not defined" errors, when running the unit-tests in Node.js/Travis.
*This is a final piece of clean-up of code that I recently wrote, after which I'm done :-)*
When the `getMainThreadWorkerMessageHandler` function was added, in PR 9385, it did so by basically introducing a `web/app.js` dependency in `src/display/api.js` through the `window.pdfjsNonProductionPdfWorker` property[1]. Even though this is limited to non-`PRODUCTION` mode, i.e. `gulp server`, it still seems unfortunate to have that sort of viewer dependency in the API code itself.
With the new, much nicer and shorter, names introduced in PR 9565 we can remove this non-`PRODUCTION` hack and just use `window.pdfjsWorker` in both the viewer and the API regardless of the build mode.
---
[1] It didn't seem correct to piggy-back on the `window.pdfjsDistBuildPdfWorker` property in non-`PRODUCTION` mode.
The `getPageSizeInches` method was implemented on `PDFDocumentProxy`, which seems conceptually wrong since the size property isn't global to the document but rather specific to each page. Hence the method is moved into `PDFPageProxy`, as `get pageSizeInches` instead to address this.
Despite the fact that new API functionality was implemented, no unit-tests were added. To prevent issues later on, we should *always* ensure that new functionality has at least some test-coverage; something that this patch also takes care of.
The new `PDFDocumentProperties._parsePageSize` method seemed unnecessary convoluted. Furthermore, in the "no data provided"-case it even returned incorrect data (an array, rather than the expected object).
Finally, the fallback strings didn't actually agree with the `en-US` locale. This inconsistency doesn't look too great, and it's thus addressed here as well.
With options being moved from the global `PDFJS` object and into `getDocument`, a side-effect is that we're now passing in a fair number of useless parameters to the various transport/network streams.
Even though this doesn't *currently* cause any problems, it nonetheless seem like a good idea to explicitly provide the parameters that are actually necessary.
One additional complication with removing this option from the global `PDFJS` object, is that the viewer currently needs to check `disableAutoFetch` in a couple of places. To address this I'm thus proposing adding a getter in `PDFDocumentProxy`, to allow checking the *actually* used values for a particular `getDocument` invocation.
Unfortunately, as far as I can tell, we still need the ability to adjust certain API options depending on the browser environment in PDF.js version `2.0`. However, we should be able to separate this from the general compatibility code in the `src/shared/compatibility.js` file.
Compared to most other options currently/previously residing on the global `PDFJS` object, some of the Worker specific ones (e.g. `workerPort`/`workerSrc`) probably cannot be moved into options provided directly when initializing e.g. `PDFWorker`.
The reason is that in some cases, e.g. the Webpack examples, we try to provide Worker auto-configuration and I cannot see a good solution for that use-case if we completely remove the globally available Worker configuration.
However inline with previous patches for PDF.js version `2.0`, it does seem like a worthwhile goal to move away from storing options directly on the global `PDFJS` object, since that is a pattern we should avoid going forward. Especially since one of the (eventual) goals is to attempt to *completely* remove the global `PDFJS` object, and rely solely on exporting/importing the needed functionality.
By introducing the `GlobalWorkerOptions` we thus have larger flexibility in the future, if/when the global `PDFJS` object will be removed.
In order to simplify things, the undocumented `enableStats` option was removed and `pdfBug` is now instead used to enabled general debugging *and* page request/rendering stats.
Considering that in the default viewer the `stats` was only used when debugging was also enabled, this simplification (code wise) definitely seem worthwhile to me.
This removes the `PDFJS.externalLinkTarget`/`PDFJS.externalLinkRel` dependency from the viewer components, but please note that as a *temporary* solution the default viewer still uses it.
This removes the `PDFJS.imageResourcesPath` dependency from the viewer components and the test-suite, but please note that as a *temporary* solution the default viewer still uses it.
Fallback to the built-in JPEG decoder when browser decoding fails, and attempt to handle JPEG images with DNL (Define Number of Lines) markers (issue 8614)
First of all, note how in both `fetch_stream.js` and `node_stream.js` we always overwrite the `this._contentLength` property even when the response headers doesn't actually contain any (valid) length information. This could thus result in the `length` parameter, as passed to the network stream, being completely ignored despite having no better information available.
Secondly, in `node_stream.js` the `this._isRangeSupported` property wasn't always updated correctly based on the response headers.
This works by making `PartialEvaluator.buildPaintImageXObject` wait for the success/failure of `loadJpegStream` on the API side *before* parsing continues.
Please note that in practice, it should be quite rare for the browser to fail loading/decoding of a JPEG image. In the general case, it should thus not be completely surprising if even `src/core/jpg.js` will fail to decode the image.
Since `loadJpegStream` is only used at a *single* spot in the code-base, and given that it's very heavily tailored to the calling code (since it relies on the data structure of `PDFObjects`), this patch simply inlines the code in `src/display/api.js` instead.
Despite this patch removing the `disableWorker` option itself, please note that we'll still fallback to loading the worker file(s) on the main-thread when running in environments without proper Web Worker support.
Furthermore it's still possible, even with this patch, to force the use of fake workers by manually loading the necessary file using a `<script>` tag on the main-thread.[1]
That way, the functionality of the now removed `SINGLE_FILE` build target and the resulting `build/pdf.combined.js` file can still be achieved simply by adding e.g. `<script src="build/pdf.worker.js"></script>` to the HTML (obviously with the path adjusted as needed).
Finally note that the `disableWorker` option is a performance footgun, and unfortunately many existing third-party examples actually use it without providing any sort of warning/justification.
---
[1] This approach is used in the default viewer, since certain kind of debugging may be easier if the code is running directly on the main-thread.
This method returns the currently used `workerSrc`, which thus allows obtaining the fallback `workerSrc` value (e.g. when the option wasn't set by the user).
Please note that this build target, and the resulting `build/pdf.combined.js` file, is equivalent to setting the `PDFJS.disableWorker` option to `true` which is a performance footgun.
It turns out that PR 9245 unfortunately broke benchmarking completely, sorry about that!
The bug is that we were attempting to reset the current instance of `StatTimer`, instead of creating a new one as was previously done. By resetting the current instance, the `StatTimer` data fetched in `test/driver.js` is now wiped out since it points to the *same* underlying object.
This re-use of a `StatTimer` instance was asked for during review, and unfortunately I didn't test this thoroughly enough before submitting the final version of the PR.[1]
---
[1] Note that while I did test the benchmarking scripts with that PR *before* initially submitting it, I did however forget to do that after addressing the review comments which might explain why this problem went unnoticed.
This patch updates the `IPDFStreamReader` interface and ensures that the interface/implementation of `network.js`, `fetch_stream.js`, `node_stream.js`, and `transport_stream.js` all match properly.
The unit-tests are also adjusted, to more closely replicate the actual behaviour of the various actual `IPDFStreamReader` implementations.
Finally, this patch adjusts the use of the Content-Disposition filename when setting the title in the viewer, and adds `PDFDocumentProperties` support as well.
The `fetch` API is only supported for http(s), even in Chrome extensions.
Because of this limitation, we should use the XMLHttpRequest API when the
requested URL is not a http(s) URL.
Fixes#9361
These were removed in PR 9170, since they were unused in the browsers that we'll support in PDF.js version `2.0`.
However looking at the output of Travis, where a subset of the unit-tests are run using Node.js, there's warnings about `btoa` being undefined. This doesn't appear to cause any errors, which probably explains why we didn't notice this before (despite PR 9201).
Since multiple empty lines is virtually unused in the code-base, and the few cases that do exist look like "typos", let's enforce greater consistency here; please see https://eslint.org/docs/rules/no-multiple-empty-lines.
It is only used in a few places to handle prefixing style properties if
necessary. However, we used it only for `transform`, `transformOrigin`
and `borderRadius`, which according to Can I Use are supported natively
(unprefixed) in the browsers that PDF.js 2.0 supports. Therefore, we can
remove this class, which should help performance too since this avoids
extra function calls in parts of the code that are called often.
This was an oversight in PR 9095, which unfortunately breaks rendering in some PDF files (e.g. the one from issue 6737).
It thus appears that we don't have any test-coverage for this code-path, and given the relative complexity of the PDF files affected by this bug I wasn't able to easily create a reduced test-case.
*Please note:* The linked test-case included in this patch is currently *not* rendered correctly (that'd be the PR 6606), but it at least gives us some test-coverage here.
I recall being confused as to the purpose of the `encrypted` property all the way back when working on PR 4750.
Looking at the history, this property was added in PR 1698 when password support was added to the API/viewer. However, its only purpose seem to have been to facilitate the addition of a `isEncrypted` function in the API. That function never, as far as I can tell, saw any use and was unceremoniously removed in PR 4144.
Since we want to avoid sending all non-essential data early during initial document loading (e.g. PR 4750), it seems correct to get rid of the `encrypted` property. Especially since it hasn't even been exposed in the API for over three years, with no complaints that I'm aware of.
Finally note that the `encrypt` property on the `XRef` instance isn't tied to the code that's being removed here. Given that we're calling `PDFDocument.parse` during `createDocumentHandler` in the worker which, via `PDFDocument.setup`, calls `XRef.parse` where the `Encrypt` data (if it exists) is always parsed.
Please note that while this could be considered a regression in user-facing behaviour, I'm not convinced that it's really a regression as such since prior to PR 8912 the Metadata would fail to parse (with an XML error) and thus be ignored when setting the viewer title.
With the refactored Metadata parsing we're now able to parse this, which uncovered issues with a subset of broken Ghostscript Metadata that uses HTML character names.
Fixes https://bugzilla.mozilla.org/show_bug.cgi?id=1424938
Unless the debugging tools (i.e. `PDFBug`) are enabled, or the `browsertest` is running, the `PDFPageProxy.stats` aren't actually used for anything.
Rather than initializing unnecessary `StatTimer` instances, we can simply re-use *one* dummy class (with static methods) for every page. Note that by using a dummy `StatTimer` in this way, rather than letting `PDFPageProxy.stats` be undefined, we don't need to guard *every* single stats collection callsite.
Since it wouldn't make much sense to attempt to use `PDFPageProxy.stats` when stat collection is disabled, it was instead changed to a "private" property (i.e. `PDFPageProxy._stats`) and a getter was added for accessing `PDFPageProxy.stats`. This getter will now return `null` when stat collection is disabled, making that case easy to handle.
For benchmarking purposes, the test-suite used to re-create the `StatTimer` after loading/rendering each page. However, modifying properties on various API code from the outside in this way seems very error-prone, and is an anti-pattern that we really should avoid at all cost. Hence the `PDFPageProxy.cleanup` method was modified to accept an optional parameter, which will take care of resetting `this.stats` when necessary, and `test/driver.js` was updated accordingly.
Finally, a tiny bit more validation was added on the viewer side, to ensure that all the code we're attempting to access is defined when handling `PDFPageProxy` stats.
*This patch is the result of me starting to look into moving parameters from `PDFJS` into `getDocument` and other API methods.*
When familiarizing myself with the code, the signatures of the various network streams seemed to be unnecessarily cumbersome since `disableRange` is currently handled separately from other parameters.
I'm assuming that the explanation for this is probably "for historical reasons", as is often the case. Hence I'd like to clean this up *before* we start the larger, and more invasive, `PDFJS` parameter re-factoring.
Nothing uses this option anymore, so setting it is a no-op now. We can
safely remove it.
Use `SKIP_BABEL` (instead of `PDFJS_NEXT`) now if you want to skip Babel
translation for a build.
I don't have a good example at hand right know, but I recall seeing custom deployments of PDF.js that bundle a *specific* version of the `build/pdf.js` file and then set `PDFJS.workerSrc` to point to https://mozilla.github.io/pdf.js/build/pdf.worker.js.
That practice seems really bad since, besides (obviously) causing unnecessary server load, it will very quickly result in a version mismatch between the `pdf.js` and `pdf.worker.js` files in those PDF.js deployments.
Such a version mismatch could easily lead to either breaking errors, or even worse slightly inconsistent behaviour for an API call (if the API -> Worker interface changes, which does happen from time to time).
To avoid the problems described above, I'm thus proposing that we enforce that the versions of the `pdf.js` and `pdf.worker.js` files must always match.
The `DOMParser` is most likely overkill and may be less secure.
Moreover, it is not supported in Node.js environments.
This patch replaces the `DOMParser` with a simple XML parser. This
should be faster and gives us Node.js support for free. The simple XML
parser is a port of the one that existed in the examples folder with a
small regex fix to make the parsing work correctly.
The unit tests are extended for increased test coverage of the metadata
code. The new method `getAll` is provided so the example does not have
to access internal properties of the object anymore.
Currently `PDFFunction` is implemented (basically) like a class with only `static` methods. Since it's used directly in a number of different `src/core/` files, attempting to pass in `isEvalSupported` would result in code that's *very* messy, not to mention difficult to maintain (since *every* single `PDFFunction` method call would need to include a `isEvalSupported` argument).
Rather than having to wait for a possible re-factoring of `PDFFunction` that would avoid the above problems by design, it probably makes sense to at least set `isEvalSupported` globally for `PDFFunction`.
Please note that there's one caveat with this solution: If `PDFJS.getDocument` is used to open multiple files simultaneously, with *different* `PDFJS.isEvalSupported` values set before each call, then the last one will always win.
However, that seems like enough of an edge-case that we shouldn't have to worry about it. Besides, since we'll also test that `eval` is actually supported, it should be fine.
Fixes 5573.
This patch provides a new unit tested factory for creating SVG
containers and elements. This code is duplicated twice in the
codebase, but with upcoming changes this would need to be duplicated
even more. Moreover, consolidating this code in one factory allows
us to replace it easily for e.g., supporting Node.js. Therefore, move
this to a central place and update/ES6-ify the related code.
Finally, we replace `setAttributeNS` with `setAttribute` because no
namespace is provided.
Rather than displaying links that does *nothing* when clicked, it probably makes more sense to simply not render them instead. Especially since it turns out that, at least at this point in time, this is *very* easy to both implement and test.
Fixes 3897.
It seems that the status check, for non-HTTP loads, causes the default viewer to *refuse* to open local PDF files.
***STR:***
1. Make sure that fetch support is enabled in the browser. In Firefox Nightly, set `dom.streams.enabled = true` and `javascript.options.streams = true` in `about:config`.
2. Open https://mozilla.github.io/pdf.js/web/viewer.html.
3. Click on the "Open file" button, and open a new PDF file.
***ER:***
A new PDF file should open in the viewer.
***AR:***
The PDF file fails to open, with an error message of the following format:
`Message: Unexpected server response (200) while retrieving PDF "blob:https://mozilla.github.io/a4fc455f-bc05-45b5-b6aa-2ecff3cb45ce".`
The property and the setter for text rise were already present, but they
were never used or called. This patch completes the implementation by
calling the setter when the operator is encountered and by using the
text rise value when rendering text.
This bug is similar to the canvas bug of #6721.
I found this bug when I tried to run pdf2svg on a SVG file, and the generated
SVG could not be viewed in Chrome due to a SVG/XML parsing error:
"PCDATA invalid Char value 3"
Reduced test case:
- https://github.com/mozilla/pdf.js/files/1229507/pcdatainvalidchar.pdf
- expected: "hardware performance"
- Actual SVG source: "hardware\x03performance"
(where "\x03" is a non-printable character, and invalid XML).
In terms of rendering, this bug is similar to #6721, where an unexpected glyph
appeared in the canvas renderer. This was fixed by #7023, which skips over
missing glyphs. This commit follows a similar logic.
The test case from #6721 can be used here too:
- https://github.com/mozilla/pdf.js/files/52205/issue6721_reduced.pdf
expected: "Issue 6721"
actual (before this patch): "Issue ààà6721"
This replaces `assert` calls with `throw new FormatError()`/`throw new Error()`.
In a few places, throwing an `Error` (which is what `assert` meant) isn't correct since the enclosing function is supposed to return a `Promise`, hence some cases were changed to `Promise.reject(...)` and similarily for `createPromiseCapability` instances.
Use the environment's zlib implementation if available to get
reasonably-sized SVG files when an XObject image is converted to PNG.
The generated PNG is not optimal because we do not use a PNG predictor.
Futher, when our SVG backend is run in a browser, the generated PNG
images will still be unnecessarily large (though the use of blob:-URLs
when available should reduce the impact on memory usage). If we want to
optimize PNG images in browsers too, we can either try to use a DEFLATE
library such as pako, or re-use our XObject image painting logic in
src/display/canvas.js. This potential improvement is not implemented by
this commit
Tested with:
- Node.js 8.1.3 (uses zlib)
- Node.js 0.11.12 (uses zlib)
- Node.js 0.10.48 (falls back to inferior existing implementation).
- Chrome 59.0.3071.86
- Firefox 54.0
Tests:
Unit test on Node.js:
```
$ gulp lib
$ JASMINE_CONFIG_PATH=test/unit/clitests.json node ./node_modules/.bin/jasmine --filter=SVG
```
Unit test in browser: Run `gulp server` and open
http://localhost:8888/test/unit/unit_test.html?spec=SVGGraphics
To verify that the patch works as desired,
```
$ node examples/node/pdf2svg.js test/pdfs/xobject-image.pdf
$ du -b svgdump/xobject-image-1.svg
# ^ Calculates the file size. Confirm that the size is small
# (784 instead of 80664 bytes).
```
Move the DEFLATE logic in convertImgDataToPng to a separate function.
A later commit will introduce a more efficient deflate algorithm,
and fall back to the existing, naive algorithm if needed.
`__pdfjsdev_webpack__` was used to skip evaluating part of an AST,
in order to not mangle some `require` symbols.
This commit removes `__pdfjsdev_webpack__`, and:
- Uses `__non_webpack_require__` when one wants the output to
contain `require` instead of `__webpack_require__`.
- Adds options to the webpack config to prevent "polyfills" for
some Node.js-specific APIs to be added.
- Use `// eslint-disable-next-line no-undef` instead of `/* globals ... */`
for variables that are not meant to be used globally.
In general, we may not know the stroke properties when path construction
happens. Since we must know the properties when we apply the stroke, we
should set the properties at that point. Note that we already do that
for the color and opacity, but not yet for the other properties.
In the PDF from issue 8527, the clip operator (W) shows up before a path
is defined. The current SVG backend however expects a path to exist
before generating a `<svg:clipPath>` element.
In the example, the path was defined after the clip, followed by a
endPath operator (n).
So this commit fixes the bug by moving the path generation logic from
clip to endPath.
Our canvas backend appears to use similar logic:
`CanvasGraphics_endPath` calls `consumePath`, which in turn draws the
clip and resets the `pendingClip` state. The canvas backend calls
`consumePath` from multiple other places, so we probably need to check
whether doing so is also necessary for the SVG backend.
I scanned our corpus of PDF files in test/pdfs, and found that in every
instance (except for one), the "W" PDF operator (clip) is immediately
followed by "n" (endPath). The new test from this commit (clippath.pdf)
starts with "W", followed by a path definition and then "n".
# Commands used to find some of the clipping commands:
grep -ra '^W$' -C7 | less -S
grep -ra '^W ' -C7 | less -S
grep -ra ' W$' -C7 | less -S
test/pdfs/issue6413.pdf is the only file where "W" (a tline 55) is not
followed by "n". In fact, the "W" is the last operation of a series of
XObject painting operations, and removing it does not have any effect
on the rendered PDF (confirmed by looking at the output of PDF.js's
canvas backend, and ImageMagick's convert command).
This patch adds Streams API support in getTextContent
so that we can stream data in chunks instead of fetching
whole data from worker thread to main thread. This patch
supports Streams API without changing the core functionality
of getTextContent.
Enqueue textContent directly at getTextContent in partialEvaluator.
Adds desiredSize and ready property in streamSink.
http://eslint.org/docs/rules/comma-danglehttp://eslint.org/docs/rules/object-curly-spacing
Given that we currently have quite inconsistent object formatting, fixing this in *one* big patch probably wouldn't be feasible (since I cannot imagine anyone wanting to review that); hence I've opted to try and do this piecewise instead.
Please note: This patch was created automatically, using the ESLint `--fix` command line option. In a couple of places this caused lines to become too long, and I've fixed those manually; please refer to the interdiff below for the only hand-edits in this patch.
```diff
diff --git a/src/display/canvas.js b/src/display/canvas.js
index 5739f6f2..4216b2d2 100644
--- a/src/display/canvas.js
+++ b/src/display/canvas.js
@@ -2071,7 +2071,7 @@ var CanvasGraphics = (function CanvasGraphicsClosure() {
var map = [];
for (var i = 0, ii = positions.length; i < ii; i += 2) {
map.push({ transform: [scaleX, 0, 0, scaleY, positions[i],
- positions[i + 1]], x: 0, y: 0, w: width, h: height, });
+ positions[i + 1]], x: 0, y: 0, w: width, h: height, });
}
this.paintInlineImageXObjectGroup(imgData, map);
},
diff --git a/src/display/svg.js b/src/display/svg.js
index 9eb05dfa..2aa21482 100644
--- a/src/display/svg.js
+++ b/src/display/svg.js
@@ -458,7 +458,11 @@ SVGGraphics = (function SVGGraphicsClosure() {
for (var x = 0; x < fnArrayLen; x++) {
var fnId = fnArray[x];
- opList.push({ 'fnId': fnId, 'fn': REVOPS[fnId], 'args': argsArray[x], });
+ opList.push({
+ 'fnId': fnId,
+ 'fn': REVOPS[fnId],
+ 'args': argsArray[x],
+ });
}
return opListToTree(opList);
},
```
Note that by using `let` instead of `var` in `PartialEvaluator.setGState` and `TranslatedFont.loadType3Data`, we can get rid of further `bind` usages since `let` is block-scoped.
Also, the fact that `bind` wasn't used in the `Font` case inside of `setGState` is actually a bug which has been present ever since PR 5205, where a closure was replaced by a standard loop.[1]
---
[1] I'm not aware of any bugs caused by this, but that is probably more a happy accident than anything else, since e.g. just removing the `bind` from the `SMask` case without using block-scoped variables causes test failures.
Please see http://eslint.org/docs/rules/object-shorthand.
For the most part, these changes are of the search-and-replace kind, and the previously enabled `no-undef` rule should complement the tests in helping ensure that no stupid errors crept into to the patch.
[api-minor] Always allow e.g. rendering to continue even if there are errors, and add a `stopAtErrors` parameter to `getDocument` to opt-out of this behaviour (issue 6342, issue 3795, bug 1130815)
This patch implements support for line annotations. Other viewers only
show the popup annotation when hovering over the line, which may have
any orientation. To make this possible, we render an invisible line (SVG
element) over the line on the canvas that acts as the trigger for the
popup annotation. This invisible line has the same starting coordinates,
ending coordinates and width of the line on the canvas.
Other PDF readers, e.g. Adobe Reader and PDFium (in Chrome), will attempt to render as much of a page as possible even if there are errors present.
Currently we just bail as soon the first error is hit, which means that we'll usually not render anything in these cases and just display a blank page instead.
NOTE: This patch changes the default behaviour of the PDF.js API to always attempt to recover as much data as possible, even when encountering errors during e.g. `getOperatorList`/`getTextContent`, which thus improve our handling of corrupt PDF files and allow the default viewer to handle errors slightly more gracefully.
In the event that an API consumer wishes to use the old behaviour, where we stop parsing as soon as an error is encountered, the `stopAtErrors` parameter can be set at `getDocument`.
Fixes, inasmuch it's possible since the PDF files are corrupt, e.g. issue 6342, issue 3795, and [bug 1130815](https://bugzilla.mozilla.org/show_bug.cgi?id=1130815) (and probably others too).
- When the minified version is used the resolver of the worker can not find it properly and throws 404 error.
- The problem was that:
- It was getting the current name of the file.
- It was replacing **.js** by **.worker.js**
- When it was loading the unminified version it was working fine because:
- *pdf.js - .js + .worker.js* = **pdf.worker.js**
- When it was loading the minified version it didtn't work because:
- *pdf.min.js - .js + .worker.js* = **pdf.min.worker.js**
- **pdf.min.worker.js** doesn't exist the real file name is **pdf.worker.min.js**
The display layer is responsible for creating the HTML elements for the
annotations from the core layer. If we need to ignore border styling for
the containers of certain elements, the display layer should do so and
not the core layer. I noticed this during the implementation of line
annotations, for which we actually need the original border width in the
display layer, even though we ignore it for the container. If we set the
border style to zero in the core layer, this becomes impossible.
To prevent this, this patch moves the container border removal code from
the core layer to the display layer. This makes the core layer output
the unchanged annotation data and lets the display layer remove any
border styling if necessary.
I happened to notice that the error handling wasn't that great, which I missed previously since there were no unit-tests for failure to load built-in CMap files.
Hence this patch, which improves the error handling *and* adds tests.
I really cannot understand why this change is necessary, since modern browsers such as Firefox and Chrome work just fine with the old code.
Hence this is patch is yet another "hack" that's needed just because IE apparently cannot just work like you'd expect.
For consistency, the Node factory used in the CMap unit-tests is changed as well.
Fixes 8193.
This patch gets rid of the only case in the code-base where we're throwing a plain `string`, rather than an `Error`, which besides better/more consistent error handling also allows us to enable the [`no-throw-literal`](http://eslint.org/docs/rules/no-throw-literal) ESLint rule.
Currently the built-in CMap files are loaded in `src/core/cmap.js` using `XMLHttpRequest` directly. For some environments that might be a problem, hence this patch refactors that to instead use a factory to load built-in CMaps on the main thread and message the data to the worker thread.
This is inspired by other recent work, e.g. the addition of the `CanvasFactory`, and to a large extent on the IRC discussion starting at http://logs.glob.uno/?c=mozilla%23pdfjs&s=12+Oct+2016&e=12+Oct+2016#c53010.
Note that I initially tried to add this as a parameter to the `PDFPageProxy.render` method, such that it could be passed to `PartialEvaluator.getOperatorList`.
However, given all the different code-paths that call `getOperatorList` (there's a bunch only in `annotation.js`), this seemed to very quickly become unwieldy and thus difficult to maintain compared to simply using the existing `evaluatorOptions`.
Fixes extra canvas create calls.
Fixes unnecessary call of `new DOMCanvasFactory`.
Fixes undefined error of DOMCanvasFactory.
Fixes failures in some of the tests.
Fixes expected behaviour.
Remove unused vars.
The `Driver._cleanup` method is removing all stylesheets between test runs, which causes "TypeError: styleElement.parentNode is null" console errors in `FontLoader.clear`.
As can also be seen during various tests, some of the changes I made in PR 7972 unfortunately causes console errors.
It seems that I didn't test this properly, since it *should* have been obvious to me that while tests are triggered using Node.js, the files in question are run within the *browser*.
My apologies for not testing this thoroughly, and for causing unnecessary churn in the code!
See http://eslint.org/docs/rules/brace-style.
Having the opening/closing braces on the same line can often make the code slightly more difficult to read, in particular for `if`/`else if` statements, compared to using new lines.
This patch also, for consistency with `mozilla-central`, enables the [`no-iterator`](http://eslint.org/docs/rules/no-iterator) rule. Note that this rule didn't require a single code change.
Other PDF viewers, e.g. Adobe Reader, seem to append `FileAttachment`s to their attachments views.
One obvious difference in PDF.js is that we cannot append all the annotations on document load, since that would require parsing *every* page. Despite that, it still seems like a good idea to add `FileAttachment`s, since it's thus possible to access all the various types of attachments from a single place.
*Note:* With the previous patch we display a notification when a `FileAttachment` is added to the sidebar, which thus makes appending the contents of these annotations to the sidebar slightly more visible/useful.
Please see http://eslint.org/docs/rules/no-unused-vars; note that this patch purposely uses the same rule options as in `mozilla-central`, such that it fixes part of issue 7957.
It wasn't, in my opinion, entirely straightforward to enable this rule compared to the already existing rules. In many cases a `var descriptiveName = ...` format was used (more or less) to document the code, and I choose to place the old variable name in a trailing comment to not lose that information.
I welcome feedback on these changes, since it wasn't always entirely easy to know what changes made the most sense in every situation.
Please see http://eslint.org/docs/rules/spaced-comment.
Note that the exceptions added for `line` comments are intended to still allow use of the old preprocessor without linting errors.
Also, I took the opportunity to improve the grammar slightly (w.r.t. capitalization and punctuation) for comments touched in the patch.
Using `else` after `return` is not necessary, and can often lead to unnecessarily cluttered code. By using the `no-else-return` rule in ESLint we can avoid this pattern, see http://eslint.org/docs/rules/no-else-return.
This patch also removes the `UpdatePassword` message, in favour of using the `sendWithPromise` method of `MessageHandler`.
Furthermore, the patch also refactors the `BasePdfManager_updatePassword`/`BasePdfManager_passwordChanged` methods (in pdf_manager.js), and the `pdfManagerReady` function (in worker.js).
Modern browsers support styling radio buttons and checkboxes with CSS.
This makes the implementation much easier, and the fallback for older
browsers is still decent.
*Please note that most of the necessary code adjustments were made in PR 7890.*
ESLint has a number of advantageous properties, compared to JSHint. Among those are:
- The ability to find subtle bugs, thanks to more rules (e.g. PR 7881).
- Much more customizable in general, and many rules allow fine-tuned behaviour rather than the just the on/off rules in JSHint.
- Many more rules that can help developers avoid bugs, and a lot of rules that can be used to enforce a consistent coding style. The latter should be particularily useful for new contributors (and reduce the amount of stylistic review comments necessary).
- The ability to easily specify exactly what rules to use/not to use, as opposed to JSHint which has a default set. *Note:* in future JSHint version some of the rules we depend on will be removed, according to warnings in http://jshint.com/docs/options/, so we wouldn't be able to update without losing lint coverage.
- More easily disable one, or more, rules temporarily. In JSHint this requires using a numeric code, which isn't very user friendly, whereas in ESLint the rule name is simply used instead.
By default there's no rules enabled in ESLint, but there are some default rule sets available. However, to prevent linting failures if we update ESLint in the future, it seemed easier to just explicitly specify what rules we want.
Obviously this makes the ESLint config file somewhat bigger than the old JSHint config file, but given how rarely that one has been updated over the years I don't think that matters too much.
I've tried, to the best of my ability, to ensure that we enable the same rules for ESLint that we had for JSHint. Furthermore, I've also enabled a number of rules that seemed to make sense, both to catch possible errors *and* various style guide violations.
Despite the ESLint README claiming that it's slower that JSHint, https://github.com/eslint/eslint#how-does-eslint-performance-compare-to-jshint, locally this patch actually reduces the runtime for `gulp` lint (by approximately 20-25%).
A couple of stylistic rules that would have been nice to enable, but where our code currently differs to much to make it feasible:
- `comma-dangle`, controls trailing commas in Objects and Arrays (among others).
- `object-curly-spacing`, controls spacing inside of Objects.
- `spaced-comment`, used to enforce spaces after `//` and `/*. (This is made difficult by the fact that there's still some usage of the old preprocessor left.)
Rules that I indend to look into possibly enabling in follow-ups, if it seems to make sense: `no-else-return`, `no-lonely-if`, `brace-style` with the `allowSingleLine` parameter removed.
Useful links:
- http://eslint.org/docs/user-guide/configuring
- http://eslint.org/docs/rules/
This patch adds support for non-embedded Arial Black fonts, that use a `Arial-Black...` format for the font names.
Also, this patch changes `canvas.js` such that we always render Arial Black fonts with the maximum weight, which actually improves a number of existing test-cases. This should thus explain the test "failures", which are clear improvements compared with e.g. Adobe Reader.
Fixes 7835.
Note that in `FIREFOX/MOZCENTRAL/CHROME` builds of the standard viewer the `docBaseUrl` parameter will be set by default, since in that case it makes sense to use the current URL as a base.
For the `GENERIC` viewer, or the API itself, it doesn't make sense to try and set the `docBaseUrl` by default. However, custom deployments/implementations may still find the parameter useful.
Each well-formed SVG image has the following structure:
SVG element
- Definitions element
- Root group
- Other group 1
- ...
- Other group n
This patch factors out initialization code into a private method in such
as way that the creation of this structure is clear from the code. The
root group is the replacement for the parent group from before. We need
this group as we cannot apply the viewport transform on the SVG element
itself (this caused issues in Chrome). If other code appends groups to
the SVG image, in reality it is appending those groups to the root
group, but this detail is abstracted away by this patch.
This patch ensures that we only create transformation groups when it is
actually required and that we re-use transform groups as much as possible.
It reduces the number of transform groups for the Tracemonkey paper from
2790 to 1271, thereby making the DOM much lighter and rendering/scrolling
smoother. Moreover, it simplifies the code and prevents duplication.
Finally, we issue a warning when an unimplemented graphic state is
encountered. Before, this was ignored silently, making debugging harder.
