This patch avoids the creation of extra arrays when initializing an
array with default (zero) values. Doing this additionally makes the code
more readable by allocating enough space for the number of color
components.
For Arabic characters, the Unicode character codes are mapped to Unicode
character types using the character codes for indexing. However, the
character code 0x061D is undefined (and therefore invalid) in the
Unicode standard. The imported list does not contain this entry, but not
having it in the list breaks indexing for items after it. Therefore, put
an empty string on its position to make indexing work properly and issue
a warning in the unlikely event that we encounter this character.
*This patch fixes something that I noticed while debugging https://bugzilla.mozilla.org/show_bug.cgi?id=1308536.*
The PDF file contains a font called "NuptialScript", which unfortunately is not embedded. Since that is a non-standard font we will not be able to render it entirely correct. However, by adding "NuptialScript" to the `getNonStdFontMap`, we can at least improve the rendering slightly by using an italic (serif) fallback font.
This patch adds support for non-embedded Arial Black fonts, that use a `Arial-Black...` format for the font names.
Also, this patch changes `canvas.js` such that we always render Arial Black fonts with the maximum weight, which actually improves a number of existing test-cases. This should thus explain the test "failures", which are clear improvements compared with e.g. Adobe Reader.
Fixes 7835.
For `PartialEvaluator_getTextContent`, the same `args` Array should be re-used for every `EvaluatorPreprocessor_read` call. Hence we want to ensure that it's not accidentally replaced with `null` in `EvaluatorPreprocessor_read`, since otherwise corrupt PDF files (with too few arguments for certain commands) will cause errors in `PartialEvaluator_getTextContent`.
Perhaps a micro-optimization, but this patch also changes two `!args` comparisons to `args === null`, since that should be a tiny bit more efficient.
By only allowing very specific type of `JavaScript` actions, and also utilizing the existing `URL` validation, this patch shouldn't pose too much risk.
Fixes one of the points in issue 3897 (with the PDF file taken from issue 3438).
Fixes https://bugzilla.mozilla.org/show_bug.cgi?id=843699 (probably, since that bug doesn't contain a test-case).
It seems that certain bad PDF generators can create badly encoded "Prefix" entries for Page Labels, one example being http://ukjewishfilm.org/wp-content/uploads/2015/09/Jewish-Film-Festival-Programme-ONLINE.pdf.
Unfortunately I didn't come across such a PDF file while adding the API support for Page Labels, but with them now being used in the viewer I just found this issue. With this patch, we now display the Page Labels in the same way as Adobe Reader.
The original code is difficult to read and, more importantly, performs
actions that are not described in the specification. It replaces empty
names with a backtick and an index, but this behavior is not described
in the specification. While the specification is not entirely clear
about what should happen in this case, it does specify that the `T`
field is optional and that multiple field dictionaries may have the same
fully qualified name, so to achieve this it makes the most sense to
ignore missing `T` fields during construction of the field name. This is
the most specification-compliant solution and, judging by opened issue #6623, also the required and expected behavior.
In general we neither want, nor can, support arbitrary `Launch` actions. But in practice, all the cases we've seen so far just contains relative URLs to other PDF files. Building on PR 7689, we can thus at least support basic `Launch` actions.
Note that in `FIREFOX/MOZCENTRAL/CHROME` builds of the standard viewer the `docBaseUrl` parameter will be set by default, since in that case it makes sense to use the current URL as a base.
For the `GENERIC` viewer, or the API itself, it doesn't make sense to try and set the `docBaseUrl` by default. However, custom deployments/implementations may still find the parameter useful.
Note that this will automatically reject any relative URL.
To make the API more useful to consumers, URLs that are rejected will be available via the `unsafeUrl` property in the data object returned by `PDFPageProxy_getAnnotations`.
The patch also adds a bit more validation of the data for `Named` actions.
This not only reduces code duplication, but it also allow us to easily support the same kind of URLs we currently do for Link annotations in the Outline as well.
Each well-formed SVG image has the following structure:
SVG element
- Definitions element
- Root group
- Other group 1
- ...
- Other group n
This patch factors out initialization code into a private method in such
as way that the creation of this structure is clear from the code. The
root group is the replacement for the parent group from before. We need
this group as we cannot apply the viewport transform on the SVG element
itself (this caused issues in Chrome). If other code appends groups to
the SVG image, in reality it is appending those groups to the root
group, but this detail is abstracted away by this patch.
This patch ensures that we only create transformation groups when it is
actually required and that we re-use transform groups as much as possible.
It reduces the number of transform groups for the Tracemonkey paper from
2790 to 1271, thereby making the DOM much lighter and rendering/scrolling
smoother. Moreover, it simplifies the code and prevents duplication.
Finally, we issue a warning when an unimplemented graphic state is
encountered. Before, this was ignored silently, making debugging harder.
Let `Parser_makeFilter` pass in the `DecodeParms` data to various image `Stream`s, instead of re-fetching it in various `[...]Stream.prototype.ensureBuffer` methods
In `Parser_filter` the `DecodeParms` data is fetched and passed to `Parser_makeFilter`, where we also make sure that a `Ref` is resolved to a direct object.
We can thus pass this along to the various image `Stream` constructors, to avoid the current situation where we lookup/resolve data that is already available.
Note also that we currently do *not* handle the case where `DecodeParms` is an Array entirely correct in the various image `Stream`s, and this patch fixes that for free.
While the array argument to TJ should only contain strings and numbers, other
unfortunate items are found in PDFs in the wild, e.g.:
[(Grandes) 0.0 Tc
-250.0 (Client\350les,) 0.0 Tc
-250.0 (Financements) 0.0 Tc
-250.0 (et) 0.0 Tc
-250.0 (March\351s) ] TJ
getOperatorList already properly ignores any non-string, non-numeric values in
TJ arrays; without this patch to getTextContent, returned text items can have
NaN widths due to calculations being applied to those non-numeric values.
For PDF files with multiple `/Filter`s, where the `/Length` entry is zero, we fail to render the file correctly. The reason is that `maybeLength` is `null` for the every filter except the first, and `!maybeLength` is thus truthy.
Hence it seems that we should completely ignore the `/Length` entry and also explicitly check `maybeLength === 0`.
Note that I've not (yet) come across a PDF file with this issue in the wild, but given all the stupid things PDF generators do I wouldn't be surprised if such a file actually exists. In order to prevent a possible future bug, I'm submitting this patch which includes a hand-edited PDF file that we currently cannot render correctly (but e.g. Adobe Reader can).
Directly use the hexadecimal representation, just like the
`AnnotationFlags`, to avoid calculations and to improve readability.
This allows us to simplify the unit tests for text widget annotations as
well.
When debugging issue 7643, I noticed that the `forms` tests currently doesn't look like the rendering in the viewer (with `renderInteractiveForms = true` set).
After scratching my head for a little while, I realized that PR 7633 make the implicit assumption that `Page_getOperatorList` (in `core/document.js`) is called *before* fetching the annotation with `PDFPageProxy_getAnnotations` (in `display/api.js`).
Hence this patch, that changes it so that we instead pass in the `renderInteractiveForms` parameter to `Annotation_appendToOperatorList` to ensure that it's always correctly set.
If interactive forms are enabled, then the display layer takes care of
rendering the form elements. There is no need to draw them on the canvas
as well. This also leads to issues when values are prefilled, because
the text fields are transparent, so the contents that have been rendered
onto the canvas will be visible too.
We address this issue by passing the `renderInteractiveForms` parameter
to the render task and handling it when the page is rendered (i.e., when
the canvas is rendered).
This patch improves the unit tests by testing the support for read-only
and multiline fields. Moreover, we add a reference test to ensure that
the text widgets are not only rendered, but also that their contents are
styled properly.
Finally, we perform minor improvements in `src/core/annotation.js`, for
example adding missing comments.
For embedded Type1 fonts without included `ToUnicode`/`Encoding` data, attempt to improve text selection by using the `builtInEncoding` to amend the `toUnicode` map (issue 6901, issue 7182, issue 7217, bug 917796, bug 1242142)
I intended to provide proper benchmarking results here, as outlined in https://github.com/mozilla/pdf.js/wiki/Benchmarking-your-changes, but after wasting a couple of hours over the weekend getting weird results I gave up.
It appears that there's a lot of, i.e. way too much, variance between subsequent runs of `text` tests for the results to be meaningful.
(Previously I've only benchmarked `eq` tests, so I don't know if the `text` tests has never worked well or if it's a newer problem. For reference, please see the results of back-to-back benchmark runs on the current `master` with a *very* simple manifest file: [link here].)
Instead I used `console.time/timeEnd` in `appendText` and `expandTextDivs` to be able to compare the performance with/without the patch. The entire viewer was (skip-cache) reloaded between measurements, and the result are available here: [link here].
Given the troubles I've had with benchmarking, I've not yet computed any statistics on the results (e.g. mean, variance, confidence intervals, and so on).
However, just by looking at the data I think it's safe to say that this patch first of all doesn't seem to regress the current performance. Secondly it certainly looks *very* likely that this patch actually improves the performance, especially for the one-glyph-per-text-div case (cf. issue 7224).
Re: issue 7584.
Even though this patch passes all tests (unit/font/reference) locally, including the new ones that I added in PR 7621, I'm still a bit nervous about modifying the code that choose the fallback encoding for fonts without an `/Encoding` entry.
Note that over the years this code has been changed on a number of occasions, see a possibly incomplete [list here], to deal with various cases of incorrect font data.
According to the PDF specification, see http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/PDF32000_2008.pdf#G8.1904184, it seems that we should fallback to the `StandardEncoding` for Nonsymbolic fonts.
There's obviously a risk that fixing this particular issue *could* break other PDF files for which we don't have tests. However I've tried to change the logic as little as possible in this patch, to hopefully reduce possible breakage.
Based on debugging numerous font issue, it seems that a lot of fonts actually set the Symbolic flag, even when they are in fact *not* Symbolic. Fonts actually marked as Nonsymbolic seem to be somewhat less common, which I hope should reduce the risk of the patch somewhat.
Fixes 7580.
Note that in `parseCodestream` I purposly left the `throw new Error` instances inside of the `try` block, since we don't want to throw any `Errors` while in recovery mode.
Finally somewhat unrelated to the rest of the patch, but I moved the `doNotRecover` variable declaration outside of the `try` block to avoid variable hoisting given that it's accessed inside the `catch` block.
Note that in order to prevent any possible issues, this patch does *not* try to amend the `toUnicode` data for Type1 fonts that contain either `ToUnicode` or `Encoding` entries in the font dictionary.
Fixes, or at least improves, issues/bugs such as e.g. 6658, 6901, 7182, 7217, bug 917796, bug 1242142.
Moreover, we refactor the code a bit to extract code that is shared
between the two branches and we only apply text alignment (and create
the array) when it is actually defined, since it's optional and left is
already the default.
This patch is the first step towards implementing support for
interactive forms (AcroForms). It makes it possible to render text
widget annotations exactly like Adobe Reader/Acrobat.
Everything we implement for AcroForms is disabled by default using a
preference, mainly because it is not ready to use yet, but has to
implemented in many steps to avoid complexity. The preference allows us
to work with the code while not exposing the behavior by default. Mainly
storing entered values and printing them is still absent, which would be
minimal requirements for enabling this by default.
This patch is yet another instalment in the (never ending) series of patches for PDF files that specify completely incorrect Type/Subtype for its fonts. In this case Type1/Type1C, when in fact OpenType would have been correct.
Fixes 7598.
Currently, we only support text widget annotations (field type 'Tx')
partially. However, the current code does not make this entirely clear
and does not provide a warning when an unsupported field type is
encountered, making it harder to determine why rendering fails.
Moreover, in the display layer we make no distinction between the
various types of widget annotations, causing the code for text widget
annotations to also be executed for other types of widget annotations in
a fallback situation.
This patch improves the structure of the widget annotation code. In the
core layer, we use the same structure we use for non-widget annotations
in the factory and provide a clear warning when an unsupported type is
encountered. In the display layer, we do the same and split the
`WidgetAnnotationElement` class into two classes, namely
`TextWidgetAnnotationElement` for text widget annotations and
`WidgetAnnotationElement` for other unsupported annotations as a
fallback. From this it clear that we only support text widget
annotations and nothing else.
In the case where the document was destroyed, we were rejecting the `Promise` in `JpegDecode` with a string instead of an `Error`. The patch also brings the wording more inline with other such rejections.
Use the `isInt` utility function when validating the `pageNumber` parameter in `WorkerTransport_getPage`, to make it more obvious what's actually happening. There's also a couple more unit-tests added, to ensure that we always fail in the expected way.
Finally, we can simplify the rejection handling in `WorkerTransport_getPageIndexByRef` somewhat. (Note that the only reason for using `catch` here is that since the promise is rejected on the worker side, the `reason` becomes a string instead of an `Error` which is why we "re-reject" on the display side.)
This patch avoids having to calculate the scale twice by saving it in
the properties object.
Moreover, we remove a temporary variable and place parentheses around a
calculation inside a string concatenation.
This allows us to remove the `try/catch` statements used in `src/core/stream.js` when parsing JPEG images.
As far as I can tell, the only reason for the current usage of plain `throw` is that `jpg.js` originally was external code. Given that this code now lives in our repo, this patch brings the JPEG code more in line with e.g. `src/core/jpx.js` and `src/core/jbig2.js`.
Assign the `quantizationTables` after parsing the entire JPEG image, to prevent issues when the DQT (Define Quantization Tables) marker is encountered after SOF{n} (Start of Frame) markers (issue 7406)
This patch improves performance by avoiding unnecessary type
conversions, which also help the JIT for optimizations.
Moreover, this patch fixes issues with the div expansion code where
`textScale` would be undefined in a division. Because of the `dataset`
usage, other comparisons evaluated to `true` while `false` would have
been correct. This makes the expansion mode now work correctly for cases
with, for example, each glyph in one div.
The polyfill for `WeakMap` has been provided by @yurydelendik.
We pass many parameters to `appendText` while we might as well pass the
`task` object that contains them. This saves a few lines of code and
makes the signature of `appendText` more clear. We do the same for
`expand`, which is useful for the next commit in which we replace
`div.dataset` with a `WeakMap`.
Furthermore, this patch adds a missing parameter to a comment block to
make it clear which parameters remain.
1. Expanding divs to improve text selection. (Yury)
2. Adding enhanceTextSelection as an option.
3. Moving feature functionality from text_layer_builder.js to text_layer.js.
4. Added expandTextDivs method to only load expanded divs on first click, and only show on subsequent clicks
When adding new entries to `ProblematicCharRanges`, you have to be careful to not make any mistakes since that could cause glyph mapping issues.
Currently the existing reference tests should probably help catch any errors, but based on experience I think that having a unit-test which specifically checks `ProblematicCharRanges` would be both helpful and timesaving when modifying/reviewing changes to this code.
Hence this patch which adds a function (and unit-test) that is used to validate the entries in `ProblematicCharRanges`, and also checks that we don't accidentally add more character ranges than the Private Use Area can actually contain.
The way that the validation code, and thus the unit-test, is implemented also means that we have an easy way to tell how much of the Private Use Area is potentially utilized by re-mapped characters.
Instead of having `Parser_getObj` fail unconditionally for the referenced PDF file, this patch attempts to let searching for the main trailer continue even if there are errors.
Fixes https://bugzilla.mozilla.org/show_bug.cgi?id=1250079.
This is similar to the existing `isCmd` and `isDict` functions, which already support similar kind of checks.
With the updated `isName` function, we'll be able to simplify many callsites from: `isName(someVariable) && someVariable.name === 'someName'` to: `isName(someVariable, 'someName')`.
This patch improves the performance of issue 5808, but I'm not sure if it's enough to call it fixed. On average, this patch reduces the number of textLayer div's by a factor of 3, and it also reduces the time spend in `getTextContent` by a factor of ~2.
The PDF file is generated by `Scribus PDF`, which for reasons I cannot understand is placing redundant `Tf` commands before *every* showText command.
Note how the PDF file also contains lots of (basically) identical fonts, but with slightly different names, which causes unnecessary font-switching. This causes some unnecessary breaking of textLayer div's, but this issue cannot be easily worked around.
[api-minor] Add a parameter to `PDFPageProxy_getTextContent` that controls whether `PartialEvaluator_getTextContent` will attempt to combine same line text items
Note that I used a separate warning message for this case, instead of utilizing the same one as in the unsupported subtype case, to more clearly indicate that the PDF file itself is to blame rather than PDF.js.
Fixes 7446.
Fonts that are not referenced by `Ref`s are very uncommon in practice, but it can unfortunately happen. In this case, we're currently not caching them in the usual way, i.e. by `Ref`, which leads to failures when a page is rendered after `cleanup` has run.
The simplest solution would have been to remove the `font.translated` workaround, but since this would have meant loading these kind of fonts over and over, the patch attempts to be a bit clever about this situation.
Note that if we instead loaded fonts per *page*, instead of per document, this issue wouldn't have existed.
Originally, I was just going to change this code to use `Ref_toString` in a couple more places. When I started reading the code, I figured that it wouldn't hurt to clean up a couple of comments. While doing this, I noticed that the logic for the (rare) `isDict(fontRef)` case could do with a few improvements.
There should be no functional changes with this patch, but given the added reference checks, we will now avoid bogus `Ref`s when resolving font aliases. In practice, as issue 7403 shows, the current code can break certain PDF files even if it's very rare.
Note that the only thing that this patch will change, is the `font.loadedName` in the case where a `fontRef` is a reference *and* the font doesn't have a descriptor. Previously for `fontRef = Ref(4, 0)` we'd get `font.loadedName = 'g_d0_f4_0'`, and with this patch `font.loadedName = g_d0_f4R`, which is actually one character shorted in most cases. (Given that `Ref_toString` contains an optimization for the `gen === 0` case, which is by far the most common `gen` value.)
In the already existing fallback case, where the `fontName` is used to when creating the `font.loadedName`, we allow any alphanumeric character. Hence I don't see how (as mentioned above) e.g. `font.loadedName = g_d0_f4R` would be an issue here.
From the discussion in issue 7445, it seems that there may be cases where an API consumer would want to get the text content as is, without combined text items.
After PR 7039, the PDF file in issue 7492 no longer renders at all, but note that text selection wasn't working correctly previously.
The problem with the PDF file in issue 7492 is that the `cMap`, in the `toUnicode` entry in the font, contains an invalid name:
```
/CMapName /-usr-share-fonts-truetype-Panton-Panton Family-Fontfabric - Panton.otf,000-UTF16 def
```
When we parse that line, things obviously break because there are spaces present in the wrong places.
To avoid that issue, the patch simply lets `parseCMap` continue when errors are encountered, to try and recover usable data. Note that by not aborting immediatly when an error is encountered, we are also able to fix the text selection.
Obviously, it could be argued that we should just immediatly reject a corrupt `cMap`. But given that they usually are correct, it seems that trying to recover as much data as possible from corrupt one can only be a good thing for both glyph mapping and text selection.
Fixes 7492.
In the PDF file in the issue, some of the glyphs end up being mapped to the Lepcha Unicode block; see https://en.wikipedia.org/wiki/Lepcha_(Unicode_block).
This didn't use to matter, but after HarfBuzz updates that improved support for Lepcha fonts, in particular https://bugzilla.mozilla.org/show_bug.cgi?id=1249861, some glyphs are now moved horizontally.
To avoid that, this patch adds the Lepcha block to the list of Unicode ranges that we skip when building the glyph mapping.
Fixes 7426.
After PR 7441, where `recoverGlyphName` is used a lot more than before, many PDF files will generate a lot of warnings the console. For normal usage, compared to debugging/development, this is probably more annoying than helpful.
Fallback to attempt to recover standard glyph names when amending the `charCodeToGlyphId` with entries from the `differences` array in `type1FontGlyphMapping` (issue 7439)
In fonts with only upper-case glyphs, that are also missing a space glyph, `get spaceWidth` won't be able to return anything useful.
By adding upper-case `I` as a fallback, we can thus improve text-selection in some PDF files.
Note that locally, the patch causes slight movement in a few existing `text` tests, but in my opinion this actually looks like slight improvements.
Fixes 7180.
Currently the `isSpace` utility function is a member of `Lexer`, which seems suboptimal, given that it's placed in `core/parser.js`. In practice, this means that in a number of `core/*.js` files we thus have an *otherwise* completely unnecessary dependency on `core/parser.js` for a one-line function.
Instead, this patch moves `isSpace` into `shared/util.js` which seems more appropriate for this kind of utility function. Not to mention that since all the affected `core/*.js` files already depends on `shared/util.js`, this doesn't incur any more file dependencies.
Currently `setGState` is completely broken, and looking through the history of that code, it seems to me that this may never have worked correctly.
This patch fixes the text-selection in `extgstate.pdf` in the test-suite, which is also added as a `text` test.
Fixes http://www.pdf-archive.com/2013/09/30/file2/file2.pdf.
Note how it's not possible to show the various Popup Annotations in the above document.
To fix that, this patch lets the Popup inherit the flags of the parent, in the special case where the parent is `viewable` *and* the Popup is not.
In general, I don't think that a Popup must have the same flags set as the parent. However, it seems very strange to have a `viewable` parent annotation, and then not being able to view the Popup.
Annoyingly the PDF specification doesn't, as far as I can find, mention anything about how this case should be handled, but this patch seem consistent with the actual behaviour in Adobe Reader.
Currently for explicit destinations, compared to named destinations, we manually try to build a hash that often times is a quite poor representation of the *actual* destination. (Currently this only, kind of, works for `\XYZ` destinations.)
For PDF files using explicit destinations, this can make it difficult/impossible to obtain a link to a specific section of the document through the URL.
Note that in practice most PDF files, especially newer ones, use named destinations and these are thus unnaffected by this patch.
This patch also fixes an existing issue in `PDFLinkService_getDestinationHash`, where a named destination consisting of only a number would not be handled correctly.
With the added, and already existing, type checks in place for destinations, I really don't think that this patch exposes any "sensitive" internal destination code not already accessible through normal hash parameters.
*Please note:* Just trying to improve the algorithm that generates the hash is unfortunately not possible in general, since there are a number of cases where it will simply never work well.
- First of all, note that `getDestinationHash` currently relies on the `_pagesRefCache`, hence it's possible that the hash returned is empty during e.g. ranged/streamed loading of a PDF file.
- Second of all, the currently computed hash is actually dependent on the document rotation. With named destinations, the fetched internal destination array is rotational invariant (as it should be), but this will not hold in general for the hash. We can easily avoid this issue by using a stringified destination array.
- Third of all, note that according to the PDF specification[1], `GoToR` destinations may actually contain explicit destination arrays. Since we cannot really construct a hash in `annotation.js`, we currently have no good way to support those. Even though this case seems *very* rare in practice (I've not actually seen such a PDF file), it's in the specification, and this patch allows us to support that for "free".
---
[1] http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/PDF32000_2008.pdf#G11.1951685
Currently the `getPageIndex` method will happily return `0`, even if the `Ref` parameter doesn't actually point to a proper /Page dictionary.
Having the API trust that the consumer is doing the right thing seems error-prone, hence this patch which adds a check for this case.
Given that the `Catalog_getPageIndex` method isn't used in any hot part of the codebase, this extra check shouldn't be a problem.
(Note: in the standard viewer, it is only ever used from `PDFLinkService_navigateTo` if a destination needs to be resolved during document loading, which isn't common enough to be an issue IMHO.)
These have been found using `gulp lint` in combination with the `unused:
true` parameter for JSHint. Unfortunately there are too many false
positives to enable this feature, but now that most globals have been
removed because of the conversion to UMD the results are much more
useful than before.
In the font in question, there are a couple of `topDict` entries that have invalid values (`0xF 0xF`, i.e. just eof markers without any actual numbers).
This causes the `parseFloatOperand` function, inside `CFFParser_parseDict`, to return `NaN`. Currently we pass this broken font onto the browser, which OTS unsurprisingly rejects.
Fixes https://bugzilla.mozilla.org/show_bug.cgi?id=1068432.
As evident from e.g. PRs 6485 and 7118, some bad PDF generators unfortunately create Arrays where *some* elements are indirect objects (i.e. `Ref`s). This seems to mostly affect Arrays that contain numbers, such as e.g. `Matrix/FontMatrix/BBox/FontBBox/Rect/Color/...`, and has manifested itself in PDF files that fail to render correctly (some elements are missing).
The problem in both the cases above, besides broken rendering, was that there were *no* errors/warnings that indicated what the problem was, making it difficult to pinpoint the issue.
Hence this patch, where I've audited all usages of `Dict_get` in `src/core/` files, and replaced it with `Dict_getArray` where appropriate to try and prevent unnecessary future bugs.
This naming issue has been present since PR 3529, but at least I cannot find any issues/bugs that seem to have been caused by it, which is good.
The patch also removes an unnecessary `else` branch, since an already existing `break` means that it's redundant.
Fixes 7232.
- Add support for the 'NewWindow' property.
- Ensure that destinations are applied to the *remote* document, instead of the current one.
- Handle the `F` entry being a standard string, instead of a dictionary.
Using `new {Name,Cmd}` should be avoided, since it creates a new object on *every* call, whereas `{Name,Cmd}.get` uses caches to only create *one* object regardless of how many times they are called.
Most of these are found in the unit-tests, where increased memory usage probably doesn't matter very much. But it still seems good to get rid of those cases, since no part of the codebase ought to advertise that usage.
Given the small size of the patch, I'm also tweaking a few comments and class names.
Some browsers render certain special characters with width 0, others with strictly positive width. (For example, the Greek Delta, Δ, has width 0 in Google Chrome, and a positive width in Firefox.) The `if` clause in operation so far results in different text layer DOM trees for different browsers.
This commit fixes that by adding the elements independently of their width.
Note that in the PDF files provided by the reporter, this issue was limited to `Rect` arrays in AcroForm entries (which we currently don't support).
However, since a bad PDF generator could create this problem in *any* kind of annotation, the reduced test-case included here uses a simple LinkAnnotation instead.
Fixes 7115.
According to "The table directory" under https://developer.apple.com/fonts/TrueType-Reference-Manual/RM06/Chap6.html#Directory, TrueType font tables should have `uint32` checksums.
This is something that I noticed, and was initially confused about, while debugging a TrueType issue.
As far as I can tell, the current (`int32`) checksums we use doesn't cause any issues in practice. However, I do think that this should be addressed to agree with the specification, and to reduce possible confusion when reading the font code.
Currently there's a lot of duplicate code for non-embedded `toFontChar`, which this patch simplifies by extracting the code into a helper function instead.
This patch adds a `getUnicodeForGlyph` helper function, which is used to recover Unicode values for non-standard glyph names.
Some PDF generators, e.g. Scribus PDF, use improper `uniXXXX` glyph names which breaks the glyph mapping. We can avoid this by converting them to "standard" glyph names instead.
Fixes https://bugzilla.mozilla.org/show_bug.cgi?id=1132849.
Fixes 6893.
Fixes 6894.
In the PDF file in question, some of the 'name' table entries have `record.length === 0`. This becomes problematic in the non-unicode case, since `font.getBytes(0)` will fetch the *entire* stream.
Given that OTS rejects 'name' entries larger than `2^16`, this thus explain the sanitizer errors.
Fixes 7020.
This is required to be able to use it in the annotation display code,
where we now apply it to sanitize the filename of the FileAttachment
annotation. The PDF file from https://bugzilla.mozilla.org/show_bug.cgi?id=1230933 has shown that some PDF generators include the path of the file rather than the filename, which causes filenames with weird initial characters. PDF viewers handle this differently (for example Foxit Reader just replaces forward slashes with spaces), but we think it's better to only show the filename as intended.
Additionally we add unit tests for the `getFilenameFromUrl` helper
function.
*A more robust solution for issue 6066.*
As a temporary work-around for (the upstream) [bug 1164199](https://bugzilla.mozilla.org/show_bug.cgi?id=1164199), we parsed *all* images in the Firefox addon during a short time.
Doing so uncovered an issue with our image handling (see 6066), for JPEG images with a `DeviceGray` ColorSpace *and* `bpc !== 1` (bits per component).
As long as we let the browser handle image decoding in this case, this isn't going to be an issue, but I do think that we should proactively fix this to avoid future issues if we change where the images are decoded (in `jpg.js` vs in browser).
Also, we currently don't seem to have a test-case for that kind of image data.
Currently the `C` entry in an outline item is returned as is, which is neither particularly useful nor what the API documentation claims.
This patch also adds unit-tests for both the color handling, and the `F` entry (bold/italic flags).
`Dict_getAll` is problematic for a number of reasons. First of all, as issue 6961 shows, it can be really bad for performance, since it dereferences all indirect objects.
Second of all, all the derefencing can lead to data being unncessarily requested when ranged/chunked loading is used, thus unnecessarily delaying rendering.
Note: For cases where `Dict_getAll` was previously used, `Dict_getKeys` in combination with `Dict_get` can be used instead. This has the advantage that data isn't requested until it's actually needed.
For the operators that we currently support, the arguments are not `Dict`s, which means that it's not really necessary to use `Dict_getAll` in `EvaluatorPreprocessor_read`.
Also, I do think that if/when we support operators that use `Dict`s as arguments, that should be dealt with in the corresponding `case` in `PartialEvaluator_getOperatorList` which handles the operator.
The only reason that I can find for using `Dict_getAll` like that, is that prior to PR 6550 we would just append certain (currently unsupported) operators without doing any further processing/checking. But as issue 6549 showed, that can lead to issues in practice, which is why it was changed.
In an effort to prevent possible issue with unsupported operators, this patch simply ignores operators with `Dict` arguments in `PartialEvaluator_getOperatorList`.
For the `CalGray`/`CalRGB`/`Lab` colour spaces, we're currently using `getAll` to retrieve the parameters. However that's not really necessary, since we may just as well explicitly `get` the needed parameters instead.
Some bad PDF generators, in particular "Scribus PDF", duplicates resources *a lot* at various levels of the PDF files. This can lead to `PartialEvaluator_hasBlendModes` taking an unreasonable amount of time to complete.
The reason is that the current code is using `Dict_getAll`, which recursively dereferences *all* indirect objects, which can be really slow. This patch instead uses `Dict_getKeys`, and then manually looks up only the necessary indirect objects.
I've added the PDF file as a `load` test. The most important thing here is probably to ensure that the file remains available in the repo, and the comment should help reduced the chance of regressions. (Note that locally, the `load` test times out without this patch, but we cannot really assume that that always happens.)
Fixes 6961.
Reverts "Hack to avoid intermidiate Chrome failures during tests."
(2b2c521213).
require.js uses importScript asynchronously, which activates the worker
GC bug in WebKit. This patch works around a bug in a way that is similar
in the upcoming (but not yet released) require.js 2.1.23
The advantage of the new work-around is that it allows the runtime to
garbage-collect idle Workers.
References:
- https://crbug.com/572225
- https://webkit.org/b/153317
*This patch is based on something I noticed while debugging some of the PDF files in issue 6931.*
In a number of the cases in `setGState`, we're implicitly assuming that we're not dealing with indirect objects (i.e. `Ref`s). See e.g. the 'Font' case, or the various cases where we simply do `gStateObj.push([key, value]);` (since the code in `canvas.js` won't be able to deal with a `Ref` for those cases).
The reason that I didn't use `Dict_forEach` instead, is that it would re-introduce the unncessary closures that PR 5205 removed.
The intention of PR 5192 was to avoid adding empty `setGState` ops to the operatorList. But the patch accidentally used `>=`, which means that it's not actually working as intended, since empty arrays always have `length === 0`.
Even though the currently known test-cases render correctly without this patch, that seems more like a lucky coincidence, given that there's no guarantee that `transferMap[255] === 0` for every possible transfer function.
This patch fixes an issue that I inadvertently introduced in PR 5815, where we accidentally modify the `Differences` array in the encoding dictionary for indirect objects.
Instead of this change, we could also have used the now existing `Dict_getArray`. However in this case I don't think that would have been a good idea, since it would mean iterating through the array *twice*.
