By preserving the exception type, more fine-grained error handling can be performed via client-side logic (e.g. redirect to a search page if a PDF is not found, or to a ticket system in case of invalid PDF files).
The original exception is now re-thrown.
Fixes#11658
Somewhat surprisingly, despite the GENERIC viewer implementing "openfile" support, there's never been a keyboard shortcut available. Similar to the previous patch, this utilizes the `EventBus` for consistency with the `Toolbar`/`SecondaryToolbar` buttons.
*Please note:* This patch should NOT be construed as carte blanche to simply convert all of the code in `webViewerKeyDown`, or elsewhere, to make use of the `EventBus` instead of direct function calls.
Any further changes, along the lines in this patch, would need to be evaluated on a case-by-case basis to determine if they are actually wanted, given that many/most existing cases in `webViewerKeyDown` should already be *indirectly* observable through the `EventBus` instance.
This improves the consistency of the "download" handling, in the default viewer, such that the `Toolbar`/`SecondaryToolbar` buttons *and* the keyboard shortcut are now handled in the same way (using the `EventBus`).
Given that the "download" keyboard shortcut handling is limited to GENERIC/CHROME builds and that the issue does raise a valid point about only being able to observe *some* downloads, these changes seem acceptable in this particular case.
Finally the pre-processor condition is adjusted to *explicitly*, rather than implicitly, list the affected build targets.
*Please note:* This patch should NOT be construed as carte blanche to simply convert all of the code in `webViewerKeyDown`, or elsewhere, to make use of the `EventBus` instead of direct function calls.
Any further changes, along the lines in this patch, would need to be evaluated on a case-by-case basis to determine if they are actually wanted, given that many/most existing cases in `webViewerKeyDown` should already be *indirectly* observable through the `EventBus` instance.
These two `AppOptions` are only defined in GENERIC builds, hence it's completely unnecessary to check them in the extension builds (e.g. MOZCENTRAL and CHROME).
Also, simply let the "printResolution" option be defined in all builds since it's being accessed in `web/firefox_print_service.js` as well.
*Please note:* These changes were done automatically, using the `gulp lint --fix` command.
This rule is already enabled in mozilla-central, see https://searchfox.org/mozilla-central/rev/567b68b8ff4b6d607ba34a6f1926873d21a7b4d7/tools/lint/eslint/eslint-plugin-mozilla/lib/configs/recommended.js#103-104
The main advantage, besides improved consistency, of this rule is that it reduces the size of the code (by 3 bytes for each case). In the PDF.js code-base there's close to 8000 instances being fixed by the `dot-notation` ESLint rule, which end up reducing the size of even the *built* files significantly; the total size of the `gulp mozcentral` build target changes from `3 247 456` to `3 224 278` bytes, which is a *reduction* of `23 178` bytes (or ~0.7%) for a completely mechanical change.
A large number of these changes affect the (large) lookup tables used on the worker-thread, but given that they are still initialized lazily I don't *think* that the new formatting this patch introduces should undo any of the improvements from PR 6915.
Please find additional details about the ESLint rule at https://eslint.org/docs/rules/dot-notation
Please note that these changes were done automatically, using `gulp lint --fix`.
Given that the major version number was increased, there's a fair number of (primarily whitespace) changes; please see https://prettier.io/blog/2020/03/21/2.0.0.html
In order to reduce the size of these changes somewhat, this patch maintains the old "arrowParens" style for now (once mozilla-central updates Prettier we can simply choose the same formatting, assuming it will differ here).
*Please note:* Most of the necessary API work was done in PR 10033, and the only remaining thing to do here was to implement it in the viewer.
The new preference should thus allow e.g. enterprise users to disable copying in the viewer, for PDF documents whose permissions specify that.
In order to simplify things the "copy"-permission was implemented using CSS, as suggested in https://bugzilla.mozilla.org/show_bug.cgi?id=792816#c55, which should hopefully suffice.[1]
The advantage of this approach, as opposed to e.g. disabling the `textLayer` completely, is first of all that it ensures that searching still works correctly even in copy-protected documents. Secondly this also greatly simplifies the overall implementation, since it doesn't require a lot of code for something that's disabled by default.
---
[1] As the discussion in the bug shows, this kind of copy-protection is not very strong and is also generally easy to remove/circumvent in various ways. Hence a simple solution, targeting "regular"-users rather than "power"-users is hopefully deemed acceptable here.
For years now, the `Font.exportData` method has (because of its previous implementation) been exporting many properties despite them being completely unused on the main-thread and/or in the API.
This is unfortunate, since among those properties there's a number of potentially very large data-structures, containing e.g. Arrays and Objects, which thus have to be first structured cloned and then stored on the main-thread.
With the changes in this patch, we'll thus by default save memory for *every* `Font` instance created (there can be a lot in longer documents). The memory savings obviously depends a lot on the actual font data, but some approximate figures are: For non-embedded fonts it can save a couple of kilobytes, for simple embedded fonts a handful of kilobytes, and for composite fonts the size of this auxiliary can even be larger than the actual font program itself.
All-in-all, there's no good reason to keep exporting these properties by default when they're unused. However, since we cannot be sure that every property is unused in custom implementations of the PDF.js library, this patch adds a new `getDocument` option (named `fontExtraProperties`) that still allows access to the following properties:
- "cMap": An internal data structure, only used with composite fonts and never really intended to be exposed on the main-thread and/or in the API.
Note also that the `CMap`/`IdentityCMap` classes are a lot more complex than simple Objects, but only their "internal" properties survive the structured cloning used to send data to the main-thread. Given that CMaps can often be *very* large, not exporting them can also save a fair bit of memory.
- "defaultEncoding": An internal property used with simple fonts, and used when building the glyph mapping on the worker-thread. Considering how complex that topic is, and given that not all font types are handled identically, exposing this on the main-thread and/or in the API most likely isn't useful.
- "differences": An internal property used with simple fonts, and used when building the glyph mapping on the worker-thread. Considering how complex that topic is, and given that not all font types are handled identically, exposing this on the main-thread and/or in the API most likely isn't useful.
- "isSymbolicFont": An internal property, used during font parsing and building of the glyph mapping on the worker-thread.
- "seacMap": An internal map, only potentially used with *some* Type1/CFF fonts and never intended to be exposed in the API. The existing `Font.{charToGlyph, charToGlyphs}` functionality already takes this data into account when handling text.
- "toFontChar": The glyph map, necessary for mapping characters to glyphs in the font, which is built upon the various encoding information contained in the font dictionary and/or font program. This is not directly used on the main-thread and/or in the API.
- "toUnicode": The unicode map, necessary for text-extraction to work correctly, which is built upon the ToUnicode/CMap information contained in the font dictionary, but not directly used on the main-thread and/or in the API.
- "vmetrics": An array of width data used with fonts which are composite *and* vertical, but not directly used on the main-thread and/or in the API.
- "widths": An array of width data used with most fonts, but not directly used on the main-thread and/or in the API.
- Use template strings when printing document/viewer information in `_initializeMetadata`, since the old format feels overly verbose.
Also, get the WebGL state from the `BaseViewer` instance[1] rather than the `AppOptions`. Since the `AppOptions` value could theoretically have been changed (by the user) after the viewer components were initialized, it seems much more useful to print the *actual* value that'll be used during rendering.
- Change `_initializePdfHistory` to actually do the "is embedded"-check first, in accordance with the comment and given that the "disableHistory" option usually shouldn't be set.
---
[1] Admittedly reaching into the `BaseViewer` instance and just grabbing the value perhaps isn't a great approach overall, but given that the WebGL-backend isn't even on by default this probably doesn't matter too much.
Over time, with more and more API-functionality added, the `PDFViewerApplication.load` method has become quite large and complex. In an attempt to improve the current situation somewhat, this patch moves the fetching and initialization of "auto print" out into its own (private) helper method instead.
Over time, with more and more API-functionality added, the `PDFViewerApplication.load` method has become quite large and complex. In an attempt to improve the current situation somewhat, this patch moves the fetching and initialization of "metadata" out into its own (private) helper method instead.
Over time, with more and more API-functionality added, the `PDFViewerApplication.load` method has become quite large and complex. In an attempt to improve the current situation somewhat, this patch moves the fetching and initialization of "page labels" out into its own (private) helper method instead.
This functionality was only added to the default viewer for backwards compatibility and to support the various PDF viewer tests in mozilla-central, with the intention to eventually remove it completely.
While the different mozilla-central tests cannot be *easily* converted from DOM events, it's however possible to limit that functionality to only MOZCENTRAL builds *and* when tests are running.
Rather than depending of the re-dispatching of internal events to the DOM, the default viewer can instead be used in e.g. the following way:
```javascript
document.addEventListener("webviewerloaded", function() {
PDFViewerApplication.initializedPromise.then(function() {
// The viewer has now been initialized, and its properties can be accessed.
PDFViewerApplication.eventBus.on("pagerendered", function(event) {
console.log("Has rendered page number: " + event.pageNumber);
});
});
});
```
The `BaseViewer.setDocument` method in particular is necessary for rendering to start when the viewer loads, hence you obviously want that to happen as soon as possible and without any unnecessary delays.
Unfortunately *some* API calls need to be done before that, note existing comments, however the `ViewHistory` initialization (and subsequent fetching of data) in particular can be moved slightly without any adverse effects.
As part of testing I've used logging with `performance.now()` inserted in various parts of this code, and there's *obviously* no discernible changes between `master` and this patch for e.g. rendering starting in the viewer.
*Note:* The vast majority of this patch is simple indentation changes, which were forced by Prettier (and done automatically with `gulp lint --fix`).
The viewer doesn't currently support executing of any JavaScript, as found in some PDF documents, for security reasons. (Although there's a small hack to at least provide basic support for automatic printing on document load, without running scripts.)
However, in the event that the browser doesn't support printing we're not run *any* of this code. In particular that means that we're also not displaying the "Warning: JavaScript is not supported" message, which seems strange since JavaScript found in a PDF document can really contain *anything* (and not only printing instructions).
It thus seem reasonable, as far as I'm concerned, to always display the JavaScript-warning *even* if printing happens to be unsupported.
*This is part of a series of patches that will try to split PR 11566 into smaller chunks, to make reviewing more feasible.*
Once all the code has been fixed, we'll be able to eventually enable the ESLint `no-shadow` rule; see https://eslint.org/docs/rules/no-shadow
There's a couple of issues with this functionality:
- The respective `PromiseCapability` instances are not being reset, in `BaseViewer._resetView`, when the document is closed which is inconsistent with all other state.
- While the default viewer depends on these promises, and they thus ought to be considered part of e.g. the `PDFViewer` API-surface, they're not really defined in a particularily user-visible way (being that they're attached to the `BaseViewer` instance *inline* in `BaseViewer.setDocument`).
- There's some internal `BaseViewer` state, e.g. `BaseViewer._pageViewsReady`, which is tracked manually and could instead be tracked indirectly via the relevant `PromiseCapability`, thus reducing the need to track state *twice* since that's always best to avoid.
*Please note:* In the existing implementation, these promises are not defined *until* the `BaseViewer.setDocument` method has been called.
While it would've been simple to lift that restriction in this patch, I'm purposely choosing *not* to do so since this ensures that any Promise handlers added inside of `BaseViewer.setDocument` are always invoked *before* any external ones (and keeping that behaviour seems generally reasonable).
This patch deprecates the existing `getOpenActionDestination` API method, in favor of a better and more general `getOpenAction` method instead. (For now JavaScript actions, related to printing, are still handled as before.)
By clearly separating "regular" Print actions from the JavaScript handling, it's thus possible to get rid of the somewhat annoying and strictly incorrect warning when the viewer loads.
Since the goal has always been, essentially since the `EventBus` abstraction was added, to remove all dispatching of DOM events[1] from the viewer components this patch tries to address one thing that came up when updating the examples:
The DOM events are always dispatched last, and it's thus guaranteed that all internal event listeners have been invoked first.
However, there's no such guarantees with the general `EventBus` functionality and the order in which event listeners are invoked is *not* specified. With the promotion of the `EventBus` in the examples, over DOM events, it seems like a good idea to at least *try* to keep this ordering invariant[2] intact.
Obviously this won't prevent anyone from manually calling the new *internal* viewer component methods on the `EventBus`, but hopefully that won't be too common since any existing third-party code would obviously use the `on`/`off` methods and that all of the examples shows the *correct* usage (which should be similarily documented on the "Third party viewer usage" Wiki-page).
---
[1] Looking at the various Firefox-tests, I'm not sure that it'll be possible to (easily) re-write all of them to not rely on DOM events (since getting access to `PDFViewerApplication` might be generally difficult/messy depending on scopes).
In any case, even if technically feasible, it would most likely add *a lot* of complication that may not be desireable in the various Firefox-tests. All-in-all, I'd be fine with keeping the DOM events only for the `MOZCENTRAL` target and gated on `Cu.isInAutomation` (or similar) rather than a preference.
[2] I wouldn't expect any *real* bugs in a custom implementation, simply based on event ordering, but it nonetheless seem like a good idea if any "external" events are still handled last.
To avoid outright breaking third-party usages of the "viewer components" the `getGlobalEventBus` functionality is left intact, but a deprecation message is printed if the function is invoked.
The various examples are updated to *explicitly* initialize an `EventBus` instance, and provide that when initializing the relevant viewer components.
This complements the existing `PDFViewerApplication.initialized` boolean property, and may be helpful for custom implementations of the default viewer. This will thus provide users of the default viewer an alternative to setting the preference to dispatch events to the DOM (and listen for the "localized" event), since they can instead use:
```javascript
document.addEventListener("webviewerloaded", function() {
PDFViewerApplication.initializedPromise.then(function() {
// The viewer has now been initialized.
})
});
```
Note that in order to avoid manually tracking the initialization state *twice*, this implementation purposely uses the `PromiseCapability` functionality to handle both `PDFViewerApplication.initialized` and `PDFViewerApplication.initializedPromise` internally.
There's no particular reason for using the PDF.js helper function `createObjectURL`[1] in the debugger, instead of the native `URL.createObjectURL` directly, for a couple of reasons:
- The relevant code-path only applies to fonts loaded with the Font Loading API, and this isn't supported in IE anyway.
- The debugger can, since quite some time, not even be loaded in IE any more.
- General support for IE is now limited, and there's no guaratee that everything actually works.
---
[1] It provides a fallback for browsers with broken `Blob` support, which as usual means Internet Explorer :-P
The debugging hash parameters[1] are intended to facilitate access to various tools/settings in PRODUCTION builds, protected by the `pdfBugEnabled` preference.
At this point, the remaining debugging hash parameters are mainly intended to allow access to the `PDFBug` tools and/or to quickly toggle certain larger features.
The "useOnlyCssZoom" functionality doesn't really seem to fit in with the rest of these hash parameters, since:
- This is, comparatively speaking, a minor viewer-specific feature.
- The zooming implementation will (almost) always fallback to CSS-only zooming, for any document, once the canvases becomes large enough. Hence, the majority of the CSS zooming feature can still be tested *directly* in any build of the viewer.
- After the initial implementation, years ago, the CSS-only zooming code in question hasn't changed much (or even at all), i.e. it doesn't seem like an active development target.[2]
- If the "useOnlyCssZoom" functionality was added today, it's unlikely that a hash parameter would've been added.
- Last, but not least, there's also a `useOnlyCssZoom` preference hence toggling this functionality shouldn't be too difficult (e.g. if someone needs to hack on it).
All in all, I'm thus suggesting that we remove the "useOnlyCssZoom" hash parameter.
---
[1] Originally these hash parameters could be used directly in any build, which was bad since it would allow any link to potentially disable functionality and/or reduce performance.
[2] If it had seen active development over the years, I'd be *much* more inclined to keep the hash parameter.
For people running e.g. Firefox with the `pdfBugEnabled` preference set, to allow quick access to debugging tools, this method will obviously run for every opened PDF file. However, in most cases the URL hash is empty and we can thus skip most of the parsing and simply return early instead.
This removes a couple of, thanks to preceeding code, unnecessary `typeof PDFJSDev` checks, and also fixes a couple of incorrectly implemented (my fault) checks intended for `TESTING` builds.
After PR 9566, which removed all of the old Firefox extension code, the `FIREFOX` build flag is no longer used for anything.
It thus seems to me that it should be removed, for a couple of reasons:
- It's simply dead code now, which only serves to add confusion when looking at the `PDFJSDev` calls.
- It used to be that `MOZCENTRAL` and `FIREFOX` was *almost* always used together. However, ever since PR 9566 there's obviously been no effort put into keeping the `FIREFOX` build flags up to date.
- In the event that a new, Webextension based, Firefox addon is created in the future you'd still need to audit all `MOZCENTRAL` (and possibly `CHROME`) build flags to see what'd make sense for the addon.
While only the `MOZCENTRAL` builds will actually do anything meaningful with the telemetry data, none of the code in question actually runs *at all* in e.g. development mode.[1]
This seems bad since it essentially means that this code is completely untested, despite being quite important for the built-in Firefox PDF viewer, and this thus ought to be fixed.
In this case, the explanation for the current state of the code should be "for historical reasons". Before the viewer was split into the current components and before the pre-processor was improved, back when all code resided in the `web/viewer.js` file, the telemetry reporting was done with *direct* `FirefoxCom` calls. However, with the dummy `DefaultExternalServices.reportTelemetry` method there's nothing actually preventing attempting to report telemetry in any type of build.
NOTE: By running this code in GENERIC builds as well, in addition to just locally, the *viewer* part of telemetry reporting becomes tested e.g. in preview builds too which should help with reviewing.
---
[1] When fixing bug 1606566, I had to edit the relevant `PDFJSDev` checks to be able to actually test the changes locally.
With https://bugzilla.mozilla.org/show_bug.cgi?id=844349 now being fixed in Firefox, the textLayer will now actually stay hidden as intended regardless of the browser settings.
Hence it should no longer be necessary to display the fallback bar, nor print a warning in the console, for documents which contains a textLayer.
Besides removing the `supportsDocumentColors` methods in the default viewer, we can also remove a now unused l10n string.
In order to eventually get rid of SystemJS and start using native `import`s instead, we'll need to provide "complete" file identifiers since otherwise there'll be MIME type errors when attempting to use `import`.
When working on PR 11463 I couldn't help thinking that the `Array.prototype.some` callback function, used when determining the generator, was somewhat difficult to read with its partly unused and strangely named parameters.
This covers the handful of cases that the `--fix` command couldn't deal with, and the changes aren't just fixing the linting errors but attempt to slightly improve the relevant code.
Please find additional details about the ESLint rule at https://eslint.org/docs/rules/prefer-const
Note that this patch is generated automatically, by using the ESLint `--fix` argument, and will thus require some additional clean-up (which is done separately).
Rather than having a copy of this regular expression in the `test/unit/api_spec.js` file, with a comment about keeping it up-to-date with the code in the viewer (note the incorrect file reference as well), we can just import it instead to simplify all of this.
This patch makes the follow changes:
- Remove no longer necessary inline `// eslint-disable-...` comments.
- Fix `// eslint-disable-...` comments that Prettier moved down, thus causing new linting errors.
- Concatenate strings which now fit on just one line.
- Fix comments that are now too long.
- Finally, and most importantly, adjust comments that Prettier moved down, since the new positions often is confusing or outright wrong.
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
Apparently Ghostscript can, in some cases, generate/include `Metadata` with incorrectly encoded characters.[1] This results in the viewer title looking wrong, which we thus attempt to avoid by falling back to the `Info` entry instead.
*Please note:* Obviously it would be better if this was fixed in the `Metadata` parser instead, rather than using a viewer work-around, but I'm just not sure how or even *if* that could actually be done given that the `Metadata` stream contains no trace of the *original* character.
Fixes https://bugzilla.mozilla.org/show_bug.cgi?id=1605526
---
[1] The problematic characters are from the Specials Unicode block, see https://en.wikipedia.org/wiki/Specials_(Unicode_block)
With these changes we'll always set the `pdfTitle` to the `Info` dictionary entry *first* (assuming it exists and isn't empty), before attempting to override it with the `Metadata` stream entry (assuming it exists, is non-empty *and* valid).
There should be no functional changes with this patch, but it will simplify the following patch somewhat.
