We must force-fetch standard font data, when `disableFontFace = true` is set in the API, since otherwise rendering in e.g. the viewer is still broken (same as before PR 12726 landed).
*Please note:* We still need to also load standard font data for patterns and/or some text-rendering modes, however that will require larger changes so I figured that it cannot hurt to submit *this* patch right now.
*This implementation is basically a copy of the pre-existing `builtInCMapCache` implementation.*
For some, badly generated, PDF documents it's possible that we'll end up having to fetch the *same* standard font data over and over (which is obviously inefficient).
While not common, it's certainly possible that a PDF document uses *custom* font names where the actual font then references one of the standard fonts; see e.g. issue 11399 for one such example.
Note that I did suggest adding worker-thread caching of standard font data in PR 12726, however it wasn't deemed necessary at the time. Now that we have a real-world example that benefit from caching, I think that we should simply implement this now.
- Some js files contain scale factors for each glyph in order to rescale Liberation to have a final font with the correct width.
- A lot of XFA have some containers where their dimensions are based on their text content, so using default font from browser can lead to an almost unreadable pdf.
- a lot of xfa files are using Myriad pro or Arial fonts without embedding them and some containers have some dimensions based on those font metrics. So not having the exact same font leads to a wrong display.
- since it's pretty hard to find a replacement font with the exact same metrics, this patch gives the possibility to read glyf table, rescale each glyph and then write a new table.
- so once PR #12726 is merged we could rescale for example Helvetica to replace Myriad Pro.
Given that there's no fallback on the worker-thread, it shouldn't be necessary to initialize `CMapReaderFactory`/`StandardFontDataFactory` when `useWorkerFetch = true` is set.
Slightly unrelated, but this patch also ensures that the `useSystemFonts` default value only does the `isNodeJS` check in builds where that's actually necessary.
At this point in time, the `apiCompatibilityParams` is essentially unused with the sole exception of the `disableFontFace` handling for Node.js environments.
Given that `isNodeJS` is a constant now (originally it was a function), we can simply set the correct fallback value for `disableFontFace` directly in the API and clean-up the code a bit here.
This patch uses the new option added in PR 12726 to *also* allow fetching binary CMap data directly in the worker-thread in browsers.
Given that these changes remove the need to transfer data between threads for the default (browser) use-case, we can also revert the changes in PR 11118 since that simplifies the overall implementation.
Given that these factories are being used in *different* files, for Browser respectively Node.js implementations, it seems reasonable to move them into their own file instead.
- some elements weren't displayed because their rotation angle was not taken into account;
- fix box model (XFA concept):
- remove use of outline;
- position correctly border which isn't part of box dimensions;
- fix margins issues (see issue #13474).
- move border on button instead of having it on wrapping div;
Generally, in the `src/display/` folder, we utilize `DOMSVGFactory` rather than manually creating an SVG-element; hence let's do the same thing in `src/display/pattern_helper.js` as well.
While this prevents the error which is currently thrown by the `assert` in the `DOMSVGFactory.create` method, the pattern still doesn't actually render (visibly). However, in the interest of getting rid of some open issues, this patch should make (some) sense and there's already other issues about patterns in the SVG-backend,
Given that, as clearly [outlined in the FAQ](https://github.com/mozilla/pdf.js/wiki/Frequently-Asked-Questions#backends), the SVG-backend is *not* officially supported and that there's currently no development of it; this is probably the most that is reasonable to do here.
This is necessary now, since with the previous patch the /FontBBox potentially depends on the contents of the /CharProcs-streams.
Note that if `getOperatorList` is called *before* `getTextContent`, this patch doesn't matter since the font is already fully loaded/parsed. However, for e.g. the `text` test-cases this is necessary to ensure correct reference images.
For Type3 fonts where the /CharProcs-streams of the individual glyph starts with a `d1` operator, we can use that to build a fallback bounding box for the font and thus improve text-selection in some cases.
While these objects aren't exactly that big and/or complex, they are nonetheless *only* necessary for XFA documents.
However, currently these objects are initialized *eagerly* for all PDF documents. By using the same pattern as elsewhere in the code-base, it's very easy to make these lazily initialized; so let's just do that instead :-)
- attribute 'use' was already implemented but not usehref
- in general, usehref should make reference to current document
- add support for SOM expressions in use and usehref to search a node.
- get prototype for all nodes if any.
For HighlightAnnotations with a built-in appearance stream, we still rely on it to specify the opacity correctly via a suitable blend mode. However, if the Annotation-drawing operators are placed *within* a /XObject of the /Form-type, the /ExtGState won't apply to the final rendering and the result is that the highlighting obscures the underlying text.
The more *correct* and general solution would likely be to somehow modify the implementation in `src/display/canvas.js`, to special-case handling of /Form-type /XObjects when rendering Annotations. Since we can very easily work-around this problem for now by using the "no appearance stream" code-path, doing *something* here ought to be preferable.
This patch is (obviously) merely a work-around, but given that the referenced issue is (as far as I know) the first case we've seen of this problem a simple solution will hopefully suffice for now.
This fixes the colours, by respecting the strokeAlpha/fillAlpha-values, for a couple of Annotations in the PDF document from issue 13447.[1]
---
[1] Some of the annotations still won't render at all, when compared with Adobe Reader, but that could/should probably be handled separately.
- for xfa rendering, fonts are loaded and used in html;
- when printed and saved in pdf, on linux, Firefox uses cairo backend
- when subsetting a font, cairo uses the font postscript name and when this one is empty that leads to a bug
(the append at 63f0d62684/src/cairo-cff-subset.c (L2049) is failing because of null length)
- so this patch adds a postscript name to the font to make cairo happy.
Currently `charsCache` is initialized *lazily*, which considering that it just contains a simple `Object` doesn't seem entirely necessary. This first of all forces us to do repeated exists-checks in the `Font.charsToGlyphs` method, and secondly the similar/related `glyphCache` is already initialized eagerly.
Furthermore, this patch also does a bit of clean-up in the `Font.charsToGlyphs` method since this code is quite old.
- the only goal of this patch is to be able to get synchronously the fake html when printing from firefox:
- in order to print we need to inject some html in beforeprint callback but we cannot block in waiting for all the pages.
- from a memory point of view: it doesn't change anything since the fake HTML is deleted in the worker;
- this way we don't break any assumptions.
- I thought it was possible to rely on browser layout engine to handle layout stuff but it isn't possible
- mainly because when a contentArea overflows, we must continue to layout in the next contentArea
- when no more contentArea is available then we must go to the next page...
- we must handle breakBefore and breakAfter which allows to "break" the layout to go to the next container
- Sometimes some containers don't provide their dimensions so we must compute them in order to know where to put
them in their parents but to compute those dimensions we need to layout the container itself...
- See top of file layout.js for more explanations about layout.
- fix few bugs in other places I met during my work on layout.
Given that `URL`s aren't supported by the structured clone algorithm, see https://developer.mozilla.org/en-US/docs/Web/API/Web_Workers_API/Structured_clone_algorithm, the document in issue 1773 will cause the browser to throw `DataCloneError: The object could not be cloned.`-errors and nothing will render.
To fix this, we'll instead simply send the stringified version of the `URL` to prevent these errors from occuring.
The building of glyph paths, in the `FontRendererFactory`, can fail in various ways for corrupt font data. However, we're currently not attempting to handle any such errors in the evaluator, which means that a single broken glyph *can* prevent an entire page from rendering.
To address this we simply have to pass along, and check, the existing `ignoreErrors` option in `PartialEvaluator.buildFontPaths` similar to the rest of the `PartialEvaluator` code.
According to the specification, see https://web.archive.org/web/20210404042322if_/https://www.adobe.com/content/dam/acom/en/devnet/acrobat/pdfs/PDF32000_2008.pdf#G6.2384179, the keys of a NameTree/NumberTree should be ordered.
For corrupt PDF files, which violate this assumption, it's thus possible that trying to lookup a single entry fails.
Previously, in PR 10274, we implemented a fallback that only applies to the "bottom" node of a NameTree/NumberTree, which in general might not actually help for sufficiently corrupt NameTree/NumberTree data.
Instead we remove the current *limited* fallback from `NameOrNumberTree.get`, and defer to the call-site to handle this case explicitly e.g. by using `NameOrNumberTree.getAll` for data where that makes sense. For well-formed documents, these changes should *not* lead to any additional data fetching/parsing.
Finally, as part of these changes, the validation of named destination data is improved in the `Catalog` and a new unit-test is also added.
To get the maximum benefit from something like Prettier, you obviously don't want to disable the automatic formatting unless absolutely necessary. When we added Prettier there were a number of cases, mostly involving larger Arrays, which required disabling of the automatic formatting for overall readability and/or to not break inline comments.
With changes in Prettier version `2.3.0`, see [the release notes](https://prettier.io/blog/2021/05/09/2.3.0.html#concise-formatting-of-number-only-arrays-10106httpsgithubcomprettierprettierpull10106-10160httpsgithubcomprettierprettierpull10160-by-thorn0httpsgithubcomthorn0), there's now better formatting support for Arrays containing only numbers. Hence we can now remove a number of `// prettier-ignore` comments, and thus get the benefit of automatic formatting in (slightly) more of the code-base.
- in charstring specs at page 21 (section 4.2): "Also, it may appear in the charstring as the difference from nominalWidthX" so the number we've on the stack doesn't have to be positive.
- currently this bug has probably no visible effect
- but when the font is loaded to be used with XFA, then the rendering is incorrect.
As can be seen in PR 13371, some of the `no-var` changes in the `PartialEvaluator.{getOperatorList, getTextContent}` methods caused errors in `gulp server`-mode.
However, there's a handful of instances of `var` in other methods which should be completely *safe* to convert since there's no strange scope-issues present in that code.
With modern JavaScript modules, where only *explicitly* exported properties are visible to the outside, the `QueueOptimizerClosure` should no longer be necessary.
Furthermore, to reduce the possibility of `NullOptimizer` and `QueueOptimizer` getting out of sync (note e.g. the inconsistency fixed in PR 10784), we now let the latter extend the former one.
This patch replaces the old structure with an abstract base-class, which the new ShadingPattern classes then inherit from.
The old `createMeshCanvasClosure` can now be removed, since it's not necessary any more with modern JavaScript, and the `createMeshCanvas` function is now instead a method on the new `MeshShadingPattern` class (avoids unnecessary parameter passing).
With the changes in PR 13361, we're now using the `CanvasPattern.setTransform()` method when rendering certain Shadings/Patterns.
Note that while `CanvasPattern` itself has been supported since basically "forever", its `setTransform` method is a slightly newer addition to the specification; please refer to https://developer.mozilla.org/en-US/docs/Web/API/CanvasPattern#browser_compatibility
Rather than trying to re-write PR 13361 to not use, or possibly spending time/effort (if possible) polyfilling, `CanvasPattern.setTransform()` this patch thus suggests that we simply update the *minimum* supported browser versions instead.
According to the compatibility data linked above, the *minimum* supported browser versions in the PDF.js library are now as follows:
- Chrome >= 68, which was released on 2018-07-24.[1]
- Firefox ESR, see https://wiki.mozilla.org/Release_Management/Calendar.
- Safari >= 11.1, which was release on 2018-03-29.[2]
(Given that the PDF.js contributors cannot realistically test a bunch of old browsers, it's not unimaginable that some older browser versions are already not working with the PDF.js library.)
Based on these changes, which we should ensure are reflected in the Wiki as well, we can also remove a number of now redundant polyfills. Furthermore we'll no longer "claim" to support Windows XP, note the `gulpfile.js` changes, which should definitely *not* be an issue given that it's no longer officially supported.[3]
---
[1] According to https://en.wikipedia.org/wiki/Google_Chrome_version_history
[2] According to https://en.wikipedia.org/wiki/Safari_version_history#Safari_11
[3] According to https://en.wikipedia.org/wiki/Windows_XP#End_of_support
This patch replaces the old structure with a abstract base-class, which the new RadialAxial/Mesh-shading classes then inherit from.[1]
The old `MeshClosure` can now be removed, since it's not necessary any more, and most of the functions inside of it are now instead methods on the new `MeshShading` class. This is particularly nice, in my opinion, since we previously were *manually* passing around a reference to the current `Mesh`-instance.
---
[1] If we want/need to, in the future, split e.g. the Mesh-handling into multiple classes that should now be easy to do.
Neither the `type` or the `cs` properties are used outside of the "constructors", and we can thus remove them.[1]
Note that a lot of this code is very old, and that it actually predates the main/worker-thread split before which the *same* file was used on both the main- *and* worker-threads.
---
[1] On the main-thread, a similar `type` property was removed in PR 12591.
- Right now, a glyph with an erroneous outline is replaced by an empty glyph
if the error is far enough from the start there's likely something to render
so the idea is to replace a command with args by an endchar when no args are
on the stack: this way OTS is likely happy (no remaining args on stack) and we
can draw something which is likely better than nothing.
First of all, by using `Dict.getArray` in the `Page.content` getter we remove the need to manually iterate through and fetch the sub-streams (when they exist) in the `Page.getContentStream` method.
Secondly, we can simplify the code in `Page.{getOperatorList, extractTextContent}` by letting `Page.getContentStream` ensure that `content` is available and returning a Promise instead.
Similar to the `get`/`getAsync` methods, this should be a *tiny* bit more efficient which cannot hurt considering that `getArray` is now used a lot more than when initially added.
This reverts commit 0ef9b5aafc, since it cases a lot of warnings (see below) *locally* with e.g. the document from issue 9627.
Strangely enough, this only occurs with `gulp server`-mode and the actual builds are apparently fine. It seems that this *may* be some unfortunate interaction with the old Babel-plugin that's used together with SystemJS.
```
Warning: getTextContent - ignoring ExtGState: "FormatError: ExtGState should be a dictionary.".
```
Rather than taking the risk that this could actually cover a more serious bug, and since I cannot immediately figure out what's wrong, it thus seem safest to revert this for now and we can (carefully) revisit this once SystemJS has been removed (see PR 12563).
This patch was tested using the PDF file from issue 2618, i.e. https://bug570667.bugzilla-attachments.gnome.org/attachment.cgi?id=226471, with the following manifest file:
```
[
{ "id": "issue2618",
"file": "../web/pdfs/issue2618.pdf",
"md5": "",
"rounds": 50,
"type": "eq"
}
]
```
which gave the following results when comparing this patch against the `master` branch:
```
-- Grouped By browser, stat --
browser | stat | Count | Baseline(ms) | Current(ms) | +/- | % | Result(P<.05)
------- | ------------ | ----- | ------------ | ----------- | --- | ---- | -------------
firefox | Overall | 50 | 3417 | 3426 | 9 | 0.27 |
firefox | Page Request | 50 | 1 | 1 | 0 | 5.41 |
firefox | Rendering | 50 | 3416 | 3426 | 9 | 0.27 |
```
Based on these results, there's no significant performance regression from using standard classes and this patch should thus be OK.
Previously, we set the base transformation and pattern matrix
directly to the main rendering ctx of the page, however doing this
caused the current transform to be lost. This would cause issues
with things like shear missing so the pattern was misaligned or when
stroke was used the scale of the line width or dash would be wrong.
Instead we should leave the current transform and use setTransfrom
on the pattern so it is applied correctly. For axial and radial shadings I had
to create a temporary canvas to draw the shading so I could in turn
use setTransform.
Fixes: #13325, #6769, #7847, #11018, #11597, #11473
The following already in the corpus are improved:
issue8078-page1
issue1877-page1
This patch moves the `PDFJSDev`-checks *inline*, similar to the rest of the code-base, such that the code in question is actually being removed from the *built* files in e.g. the official releases.
After PR 13117 it's now (finally) possible for *different* build targets to specify individual options/preferences, and we can utilize that to only expose the `renderer`-preference in builds where `SVGGraphics` is actually defined.
Note that for e.g. `MOZCENTRAL`-builds, trying to enable SVG-rendering will throw immediately and the preference thus doesn't make sense to include there.
Also, update the dummy `SVGGraphics` to use a class, tweak the `PDFJSDev`-check in `src/display/svg.js` to agree fully with the option/preference, and remove an unnecessary `eslint-disable`.
Reasons for the removal include:
- This functionality was always somewhat experimental and has never been enabled by default, partly because of worries about rendering bugs caused by e.g. bad/outdated graphics drivers.
- After the initial implementation, in PR 4286 (back in 2014), no additional functionality has been added to the WebGL implementation.
- The vast majority of all documents do not benefit from WebGL rendering, since only a couple of *specific* features are supported (e.g. some Soft Masks and Patterns).
- There is, and has always been, *zero* test-coverage for the WebGL implementation.
- Overall performance, in the PDF.js library, has improved since the experimental WebGL implementation was added.
Rather than shipping unused *and* untested code, it seems reasonable to simply remove the WebGL implementation for now; thanks to version control it's always possible to bring back the code should the need ever arise.
Compared to other data-structures, such as e.g. `Dict`s, we're purposely *not* caching Streams on the `XRef`-instance.[1]
The, somewhat unfortunate, effect of Streams not being cached is that repeatedly getting the *same* Stream-data requires re-parsing/re-initializing of a bunch of data; see `XRef.fetch` and related methods.
For the font-parsing in particular we're currently fetching the `toUnicode`-data, which is very often a Stream, in `PartialEvaluator.preEvaluateFont` and then *again* in `PartialEvaluator.extractDataStructures` soon afterwards.
By instead letting `PartialEvaluator.preEvaluateFont` export the "raw" `toUnicode`-data, we can avoid *some* unnecessary re-parsing/re-initializing when handling fonts.
*Please note:* In this particular case, given that `PartialEvaluator.preEvaluateFont` only accesses the "raw" `toUnicode` data, exporting a Stream should be safe.
---
[1] The reasons for this include:
- Streams, especially `DecodeStream`-instances, can become *very* large once read. Hence caching them really isn't a good idea simply because of the (potential) memory impact of doing so.
- Attempting to read from the *same* Stream-instance more than once won't work, unless it's `reset` in between, since using any method such as e.g. `getBytes` always starts at the current data position.
- Given that parsing, even in the worker-thread, is now fairly asynchronous it's generally impossible to assert that any one Stream-instance isn't being accessed "concurrently" by e.g. different `getOperatorList` calls. Hence `reset`-ing a cached Stream-instance isn't going to work in the general case.
Rather than re-fetching/re-parsing these properties immediately in `PartialEvaluator.translateFont`, we can simply export them instead. (Obviously the effect will be really tiny, but there is less parsing overall this way.)
*Please note:* While I don't have a document that this patches fixes, the current code is however not entirely correct as far as I can tell.
Looking at how the `Widths` array is parsed in `PartialEvaluator.extractWidths`, it's clear that the implementation in `PartialEvaluator.preEvaluateFont` is a bit too simplistic. In particular, by only wrapping the data into a TypedArray, there's no attempt to handle *indirect* objects which could potentially lead to colliding `hash`es being computed.
To hopefully help prevent any future bugs, make sure that composite/non-composite fonts cannot accidentally get matching `hash`es. Given the differences between those font types, that's very unlikely to be useful or even correct in general.
Without this some *composite* fonts may incorrectly end up with matching `hash`es, thus breaking rendering since we'll not actually try to load/parse some of the fonts.
*Please note:* Given that the document, in the referenced issue, doesn't embed *any* of its fonts there's no guarantee that it renders correctly in all configurations even with this patch.
With modern JavaScript modules, where you explicitly list the properties that should be exported, it's no longer necessary to wrap *all* of the code within one file into a top-level closure.[1]
This patch reduces the size, of even the *built* `pdf.worker.js` file, since there's now a lot less unnecessary whitespace.
---
[1] For files which contain *different* functionality, some closures may however still make sense in order to separate the code.
It might be possible to remove some of those cases later, e.g. once private class fields becomes generally available/usable in browsers.
With modern JavaScript modules, where you explicitly list the properties that should be exported, it's no longer necessary to wrap all of the code in a closure.[1]
This patch also tries to clean-up/improve a couple of the existing JSDoc-comments.
---
[1] This reduces the size, even of the *built* `pdf.js` file, since there's now a lot less unnecessary whitespace.
*My apologies for breaking this; thankfully PR 13303 hasn't reach mozilla-central yet.*
It's (obviously) necessary to initialize a `PredictorStream`-instance fully, since otherwise breakage may occur if there's errors during the actual stream parsing.
To reproduce this issue, try opening the PDF document from issue 13051 locally and observe the following message in the console:
```
Warning: Invalid stream: "ReferenceError: this hasn't been initialised - super() hasn't been called"
```
- app.alert and few other function can use an object as parameter ({cMsg: ...});
- support app.alert with a question and a yes/no answer;
- update field siblings when one is changed in an action;
- stop calculation if calculate is set to false in the middle of calculations;
- get a boolean for checkboxes when they've been set through annotationStorage instead of a string.
It shouldn't be possible for the `getBytes`-call to throw a `MissingDataException`, since all resources are loaded *before* e.g. font-parsing ever starts; see f0817015bd/src/core/object_loader.js (L111-L126)
Furthermore, even if we'd *somehow* re-throw a `MissingDataException` here that still won't help considering where the `Type1Font`-instance is created. Note how in the `Font`-constructor we simply catch any errors and fallback to a standard font, which means that a `MissingDataException` would just lead to rendering errors anyway; see f0817015bd/src/core/fonts.js (L648-L691)
All-in-all, it's not possible for a `MissingDataException` to be thrown in `getHeaderBlock` and this code-path can thus be removed.
Obviously the `Font`-class is still *very* large, given particularly how TrueType fonts are handled, however this patch-series at least improves things by moving a number of functions/classes into their own files.
As a follow-up it might make sense to try and re-factor/extract the TrueType parsing into its own file, since all of this code is quite old, however that's probably best left for another time.
For e.g. `gulp mozcentral`, the *built* `pdf.worker.js` files decreases from `1 620 332` to `1 617 466` bytes with this patch-series.
These changes were made automatically, using `gulp lint --fix`.
Given the large size of this patch, the manual fixes are done separately in the next commit.
These changes were made *mostly* automatically, using `gulp lint --fix`, with the following manual changes:
```diff
diff --git a/src/core/fonts_utils.js b/src/core/fonts_utils.js
index f88ce4a8c..c4b3f3808 100644
--- a/src/core/fonts_utils.js
+++ b/src/core/fonts_utils.js
@@ -167,8 +167,8 @@ function type1FontGlyphMapping(properties, builtInEncoding,
glyphNames) {
}
// Lastly, merge in the differences.
- let differences = properties.differences,
- glyphsUnicodeMap;
+ const differences = properties.differences;
+ let glyphsUnicodeMap;
if (differences) {
for (charCode in differences) {
const glyphName = differences[charCode];
```
- `FontFlags`, is used in both `src/core/fonts.js` and `src/core/evaluator.js`.
- `getFontType`, same as the above.
- `MacStandardGlyphOrdering`, is a fairly large data-structure and `src/core/fonts.js` is already a *very* large file.
- `recoverGlyphName`, a dependency of `type1FontGlyphMapping`; please see below.
- `SEAC_ANALYSIS_ENABLED`, is used by both `Type1Font`, `CFFFont`, and unit-tests; please see below.
- `type1FontGlyphMapping`, is used by both `Type1Font` and `CFFFont` which a later patch will move to their own files.
This is done automatically with `gulp lint --fix` and the following
manual changes:
```diff
diff --git a/src/core/function.js b/src/core/function.js
index 878001057..b7e3e6ccf 100644
--- a/src/core/function.js
+++ b/src/core/function.js
@@ -131,7 +131,7 @@ function toNumberArray(arr) {
return arr;
}
-var PDFFunction = (function PDFFunctionClosure() {
+const PDFFunction = (function PDFFunctionClosure() {
const CONSTRUCT_SAMPLED = 0;
const CONSTRUCT_INTERPOLATED = 2;
const CONSTRUCT_STICHED = 3;
@@ -484,7 +484,9 @@ var PDFFunction = (function PDFFunctionClosure() {
// clip to domain
const v = clip(src[srcOffset], domain[0], domain[1]);
// calculate which bound the value is in
- for (var i = 0, ii = bounds.length; i < ii; ++i) {
+ const length = bounds.length;
+ let i;
+ for (i = 0; i < length; ++i) {
if (v < bounds[i]) {
break;
}
@@ -673,23 +675,21 @@ const PostScriptStack = (function PostScriptStackClosure() {
roll(n, p) {
const stack = this.stack;
const l = stack.length - n;
- let r = stack.length - 1,
- c = l + (p - Math.floor(p / n) * n),
- i,
- j,
- t;
- for (i = l, j = r; i < j; i++, j--) {
- t = stack[i];
+ const r = stack.length - 1;
+ const c = l + (p - Math.floor(p / n) * n);
+
+ for (let i = l, j = r; i < j; i++, j--) {
+ const t = stack[i];
stack[i] = stack[j];
stack[j] = t;
}
- for (i = l, j = c - 1; i < j; i++, j--) {
- t = stack[i];
+ for (let i = l, j = c - 1; i < j; i++, j--) {
+ const t = stack[i];
stack[i] = stack[j];
stack[j] = t;
}
- for (i = c, j = r; i < j; i++, j--) {
- t = stack[i];
+ for (let i = c, j = r; i < j; i++, j--) {
+ const t = stack[i];
stack[i] = stack[j];
stack[j] = t;
}
@@ -939,7 +939,7 @@ class PostScriptEvaluator {
// We can compile most of such programs, and at the same moment, we can
// optimize some expressions using basic math properties. Keeping track of
// min/max values will allow us to avoid extra Math.min/Math.max calls.
-var PostScriptCompiler = (function PostScriptCompilerClosure() {
+const PostScriptCompiler = (function PostScriptCompilerClosure() {
class AstNode {
constructor(type) {
this.type = type;
```
The `this.data` property is, when defined, sent from the worker-thread as a `Uint8Array` and there's thus no reason to re-initialize the TypedArray here.
Note also the `FontFaceObject.createNativeFontFace` method just above, where we simply use `this.data` as-is.
The explanation for this code looking like it does is, as is often the case, for historical reasons. Originally we only supported `@font-face`, before the Font Loading API existed, and back then we also polyfilled TypedArrays (using regular Arrays) which should explain this particular line of code.
Given that the `bytesToString(BaseStream.getBytes(...))` pattern is somewhat common throughout the `src/core/` code, it cannot hurt to add a new `BaseStream`-method which handles that case internally.
- Improve chunking in order to fix some bugs where the spaces aren't here:
* track the last position where a glyph has been drawn;
* when a new glyph (first glyph in a chunk) is added then compare its position with the last saved one and add a space or break:
- there are multiple ways to move the glyphs and to avoid to have to deal with all the different possibilities it's a way easier to just compare positions;
- and so there is now one function (i.e. "compareWithLastPosition") where all the job is done.
- Add some breaks in order to get lines;
- Remove the multiple whites spaces:
* some spaces were filled with several whites spaces and so it makes harder to find some sequences of words using the search tool;
* other pdf readers replace spaces by one white space.
Update src/core/evaluator.js
Co-authored-by: Jonas Jenwald <jonas.jenwald@gmail.com>
Co-authored-by: Jonas Jenwald <jonas.jenwald@gmail.com>
Looking at the `ChunkedStream` implementation, it's basically a "regular" `Stream` but with added functionality in order to deal with fetching/loading of missing data.
Hence, by letting `ChunkedStream` extend `Stream`, we can remove some duplicate methods from the `ChunkedStream` class.
For all of the other `DecodeStream`s we're not passing in a `Dict`-instance manually, but instead get it from the `stream`-parameter. Hence there's no particularly good reason, as far as I can tell, to not do the same thing in `Jbig2Stream`/`JpegStream`/`JpxStream` as well.
The way that `getBaseStreams` is currently handled has bothered me from time to time, especially how we're checking if the method exists before calling it.
By adding a dummy `BaseStream.getBaseStreams` method, and having the call-sites simply check the return value, we can improve some of the relevant code.
Note in particular how the `ObjectLoader._walk` method didn't actually check that the data in question is a Stream instance, and instead only checked the `currentNode` (which could be anything) for the existence of a `getBaseStreams` property.
By having an abstract base-class, it becomes a lot clearer exactly which methods/getters are expected to exist on all Stream instances.
Furthermore, since a number of the methods are *identical* for all Stream implementations, this reduces unnecessary code duplication in the `Stream`, `DecodeStream`, and `ChunkedStream` classes.
For e.g. `gulp mozcentral`, the *built* `pdf.worker.js` files decreases from `1 619 329` to `1 616 115` bytes with this patch-series.
Given that we're using modules, meaning that only explicitly `export`ed things are visible to the outside, it's no longer necessary to wrap all of the code in a closure.
This gets rid of *a lot* of boilerplate that stems from our old way of simulating classes, and it actually reduces the filesize noticeably.
For e.g. `gulp mozcentral`, the *built* `pdf.js` files decreases from `318 404` to `314 722` bytes (~1 percent) with this patch.
This is done automatically with `gulp lint --fix` and the following
manual changes:
```diff
diff --git a/src/core/image.js b/src/core/image.js
index 35c06b8ab..e718b9937 100644
--- a/src/core/image.js
+++ b/src/core/image.js
@@ -97,7 +97,7 @@ class PDFImage {
if (isName(filter)) {
switch (filter.name) {
case "JPXDecode":
- var jpxImage = new JpxImage();
+ const jpxImage = new JpxImage();
jpxImage.parseImageProperties(image.stream);
image.stream.reset();
```
Using `for...of` is a modern and generally much nicer pattern, since it gets rid of unnecessary callback-functions. (In a couple of spots, a "regular" `for` loop had to be used.)
- In case of large string the sandbox initialization failed because of an OOM
* so allocate a new string in the heap
* and free it after use.
- it requires a quickjs update since we need to export some symbols (stringToNewUTF8 and free).
This patch first of all moves all checking/validation into the `appendIfJavaScriptDict` function, to avoid duplicating it in multiple places. Secondly, also removes what's now an outdated/incorrect comment since we have implemented scripting support.
Given that we're (almost) always iterating through the result of the `getAll`-calls, using a `Map` seems nicer overall since it's more suited to iteration compared to a regular Object.
Also, add a couple of `Dict`-checks in existing code touched by this patch, since it really cannot hurt to prevent *potential* errors in a corrupt PDF document.
First of all, while it should be very unlikely that the /ID-entry is an *indirect* object, note how we're using `Dict.get` when parsing it e.g. in `PDFDocument.fingerprint`. Hence we definitely should be consistent here, since if the /ID-entry is an *indirect* object the existing code in `src/core/writer.js` would already fail.
Secondly, to fix the referenced issue, we also need to check that the /ID-entry actually is an Array before attempting to access its contents in `src/core/writer.js`.
*Drive-by change:* In the `xrefInfo` object passed to the `incrementalUpdate` function, re-name the `encrypt` property to `encryptRef` since its data is fetched using `Dict.getRaw` (given the names of the other properties fetched similarly).
For CFF fonts without proper `ToUnicode`/`Encoding` data, utilize the "charset"/"Encoding"-data from the font file to improve text-selection (issue 13260)
Keeps screen readers from pausing on every span so
paragraphs are read more naturally. Note: this only seems
to affect Firefox, Chrome automatically combines the spans.
By not waiting for the /Properties to load, before parsing of the operatorList/textContent starts, there's a very real risk that a `MissingDataException` will be thrown when trying to access the data in the `PartialEvaluator.parseMarkedContentProps` method.
If this ever happens it will thus lead to incomplete and/or outright broken rendering, and with e.g. `disableAutoFetch=true` set the likelihood of this occuring would increase quite a bit.
*Please note:* While I've not yet seen this error in an actual PDF document, it can happen during loading if you're unlucky enough with e.g. the structure of the PDF document and/or the download speed offered by the server.
- Use `PDFManager.ensureDoc`, rather than `PDFManager.ensure`, in a couple of spots in the code. If there exists a short-hand format, we should obviously use it whenever possible.
- Fix a unit-test helper, to account for the previous changes. (Also, converts a function to be `async` instead.)
- Add one more exists-check in `PDFDocument.loadXfaFonts`, which I missed to suggest in PR 13146, to prevent any possible errors if the method is ever called in a situation where it shouldn't be.
Also, print a warning if the actual font-loading fails since that could help future debugging. (Finally, reduce overall indentation in the loop.)
- Slightly unrelated, but make a small tweak of a comment in `src/core/fonts.js` to reduce possible confusion.
- Different fonts can be used in xfa and some of them are embedded in the pdf.
- Load all the fonts in window.document.
Update src/core/document.js
Co-authored-by: Jonas Jenwald <jonas.jenwald@gmail.com>
Update src/core/worker.js
Co-authored-by: Jonas Jenwald <jonas.jenwald@gmail.com>
The size of the `src/core/obj.js` file has increased slowly over the years, and it also contains a fair amount of *distinct* functionality.
In order to improve readability and make it easier to navigate through the code, this patch moves the `XRef` into its own file.
The size of the `src/core/obj.js` file has increased slowly over the years, and it also contains a fair amount of *distinct* functionality.
In order to improve readability and make it easier to navigate through the code, this patch moves `NameTree`/`NumberTree` into its own file.
The size of the `src/core/obj.js` file has increased slowly over the years, and it also contains a fair amount of *distinct* functionality.
In order to improve readability and make it easier to navigate through the code, this patch moves the `FileSpec` into its own file.
The size of the `src/core/obj.js` file has increased slowly over the years, and it also contains a fair amount of *distinct* functionality.
In order to improve readability and make it easier to navigate through the code, this patch moves the `ObjectLoader` into its own file.
`setSelectionRange(0, 0)` added in 44b24fcc29 for #12359, required only by Firefox ([bug](https://bugzilla.mozilla.org/show_bug.cgi?id=860329)), causes issues mozilla#13191, mozilla#12592 in Safari.
`scrollLeft = 0` is a fix that breaks the focus trap in Safari while **keeping Firefox behavior same for #12359**.
Remove the unused "GetIsPureXfa" message handler; and avoid unnecessary parsing when no structTree is available (PR 13069 follow-up, PR 13221 follow-up)
With the current implementation of `PDFDocument.hasJSActions`, in the worker-thread, we're not actually handling not-yet-loaded data correctly. This can thus fail in *two* different ways:
- The `PDFDocument.fieldObjects` getter (and its helper method), while it may *return* a Promise, still fetches all of its data synchronously and it can thus throw a `MissingDataException` during parsing.
- The `Catalog.jsActions` getter, which is completely synchronous, can obviously throw a `MissingDataException` during parsing.
If either of these cases occur currently, the `PDFDocumentProxy.hasJSActions` method in the API can either return a *rejected* Promise (which it never should) or possibly "hang" and never resolve.
*Please note:* While I've not *yet* seen this error in an actual PDF document, it can happen during loading if you're unlucky enough with e.g. the structure of the PDF document and/or the download speed offered by the server.
This patch is thus based on code-inspection *and* on manually throwing a `MissingDataException` on the first access of `Catalog.jsActions` to simulate this situation.
Finally, this patch adds a couple of *API* unit-tests for this (since none existed).
Given that this only an internal helper method, used by the `Catalog.{javaScript, jsActions}` getters, this change simplifies iteration of the returned data.
We can also (slightly) re-factor the code of the `jsActions` getter, and remove an obsolete[1] JSDoc-comment from the `openAction` getter.
---
[1] Not really relevant now that we've got proper scripting support.
Similar to all other data accesses, note e.g. the "GetDocJSActions" handler just above, we need to ensure that a `MissingDataException` isn't propagated to the main-thread if this data is accessed while the PDF document is still loading.
It's obviously (a bit) more efficient to return early in `Page.getStructTree`, rather than trying to first "parse" an *empty* structTree-root.
*Somehow I didn't think of this yesterday, but this feels like a much better solution overall; sorry about the churn here!*
Looking at the API, there's no code which actually sends this message. Most likely it's a left-over from a previous version of PR 13069, since the `isPureXfa` parameter is being included in the "GetDoc" message.
This is first of all consistent with existing API-methods, where we return `null` when the data in question doesn't exist. Secondly, it should also be (slightly) more efficient since there's less dummy-data that we need to transfer between threads.
Finally, this prevents us from adding an empty/unnecessary span to *every* single page even in documents without any structure tree data.
- but don't validate them for now;
- Firefox will display a bar to warn that the signature validation is not supported (see https://bugzilla.mozilla.org/show_bug.cgi?id=854315)
- almost all (all ?) pdf readers display signatures;
- validation is done in edge but for now it's behind a pref.
