This works by making `PartialEvaluator.buildPaintImageXObject` wait for the success/failure of `loadJpegStream` on the API side *before* parsing continues.
Please note that in practice, it should be quite rare for the browser to fail loading/decoding of a JPEG image. In the general case, it should thus not be completely surprising if even `src/core/jpg.js` will fail to decode the image.
This method currently requires a fair number of parameters, which creates quite unwieldy call-sites. When invoking `buildPaintImageXObject`, you have to remember not only which arguments to supply, but also the correct order, to prevent run-time errors.
Please refer to the PDF specification, in particular http://www.adobe.com/content/dam/acom/en/devnet/acrobat/pdfs/PDF32000_2008.pdf#G7.3801570
> A colour space shall be specified in one of two ways:
> - Within a content stream, the CS or cs operator establishes the current colour space parameter in the graphics state. The operand shall always be name object, which either identifies one of the colour spaces that need no additional parameters (DeviceGray, DeviceRGB, DeviceCMYK, or some cases of Pattern) or shall be used as a key in the ColorSpace subdictionary of the current resource dictionary (see 7.8.3, "Resource Dictionaries"). In the latter case, the value of the dictionary entry in turn shall be a colour space array or name. A colour space array shall never be inline within a content stream.
>
> - Outside a content stream, certain objects, such as image XObjects, shall specify a colour space as an explicit parameter, often associated with the key ColorSpace. In this case, the colour space array or name shall always be defined directly as a PDF object, not by an entry in the ColorSpace resource subdictionary. This convention also applies when colour spaces are defined in terms of other colour spaces.
Since multiple empty lines is virtually unused in the code-base, and the few cases that do exist look like "typos", let's enforce greater consistency here; please see https://eslint.org/docs/rules/no-multiple-empty-lines.
In some fonts, the included `ToUnicode` data is incomplete causing text-selection to not work properly. For simple fonts that contain encoding data, we can manually build a `ToUnicode` map to attempt to improve things.
Please note that since we're currently using the `ToUnicode` data during glyph mapping, in an attempt to avoid rendering regressions, I purposely didn't want to amend to original `ToUnicode` data for this text-selection edge-case.
Instead, I opted for the current solution, which will (hopefully) give slightly better text-extraction results in PDF file with incomplete `ToUnicode` data.
According to the PDF specification, see [section 9.10.2](http://www.adobe.com/content/dam/acom/en/devnet/acrobat/pdfs/PDF32000_2008.pdf#G8.1873172):
> A conforming reader can use these methods, in the priority given, to map a character code to a Unicode value.
> ...
Reading that paragraph literally, it doesn't seem too unreasonable to use *different* methods for different charcodes.
Fixes 8229.
This patch makes use of the existing `ignoreErrors` property in `src/core/evaluator.js`, see PRs 8240 and 8441, thus allowing us to attempt to recovery as much as possible of a page even when it contains broken XObjects.
Fixes 8702.
Fixes 8704.
*Follow-up to PR 8909.*
This requires us to pass around `pdfFunctionFactory` to quite a lot of existing code, however I don't see another way of handling this while still guaranteeing that we can access `PDFFunction` as freely as in the old code.
Please note that the patch passes all tests locally (unit, font, reference), and I *very* much hope that we have sufficient test-coverage for the code in question to catch any typos/mistakes in the re-factoring.
The `inline` parameter is passed to a number of methods/functions in `PDFImage`, despite not actually being used. Its value is never checked, nor is it ever assigned to the current `PDFImage` instance (i.e. no `this.inline = inline` exists).
Looking briefly at the history of this code, I was also unable to find a point in time where `inline` was being used.
As far as I'm concerned, `inline` does nothing more than add clutter to already very unwieldy method/function signatures, hence why I'm proposing that we just remove it.
To further simplify call-sites using `PDFImage`/`NativeImageDecoder`, a number of methods/functions are changed to take Objects rather than a bunch of (somewhat) randomly ordered parameters.
Bug 1392647 has a PDF where the default width of the font
is 0. It draws some charcodes that don't have glyphs, but
we were wrongly using the 1000 default width for these
charcodes causing some text to be overlapping.
Currently `PDFFunction` is implemented (basically) like a class with only `static` methods. Since it's used directly in a number of different `src/core/` files, attempting to pass in `isEvalSupported` would result in code that's *very* messy, not to mention difficult to maintain (since *every* single `PDFFunction` method call would need to include a `isEvalSupported` argument).
Rather than having to wait for a possible re-factoring of `PDFFunction` that would avoid the above problems by design, it probably makes sense to at least set `isEvalSupported` globally for `PDFFunction`.
Please note that there's one caveat with this solution: If `PDFJS.getDocument` is used to open multiple files simultaneously, with *different* `PDFJS.isEvalSupported` values set before each call, then the last one will always win.
However, that seems like enough of an edge-case that we shouldn't have to worry about it. Besides, since we'll also test that `eval` is actually supported, it should be fine.
Fixes 5573.
This appears to simply have been forgotten in the re-factoring in PR 4815, where the `coded` property was renamed to the *much* more descriptive `isType3Font` property.
From looking at blame, it seems that these checks became obsolete with PR 692 (which landed close to six years ago). Note how, after that PR, there's no longer anything being assigned to the `code` property of an Object.
This replaces `assert` calls with `throw new FormatError()`/`throw new Error()`.
In a few places, throwing an `Error` (which is what `assert` meant) isn't correct since the enclosing function is supposed to return a `Promise`, hence some cases were changed to `Promise.reject(...)` and similarily for `createPromiseCapability` instances.
This patch adds Streams API support in getTextContent
so that we can stream data in chunks instead of fetching
whole data from worker thread to main thread. This patch
supports Streams API without changing the core functionality
of getTextContent.
Enqueue textContent directly at getTextContent in partialEvaluator.
Adds desiredSize and ready property in streamSink.
Please note that the `glyphlist.js` and `unicode.js` files are converted to CommonJS modules instead, since Babel cannot handle files that large and they are thus excluded from transpilation.
For some reason, we're putting all kind of images *except* JPEG into the `imageCache` in `evaluator.js`.[1]
This means that in the PDF file in issue 8380, we'll keep sending the *same* two small images[2] to the main-thread and decoding them over and over. This is obviously hugely inefficient!
As can be seen from the discussion in the issue, the performance becomes *extremely* bad if the user has the addon "Adblock Plus" installed. However, even in a clean Firefox profile, the performance isn't that great.
This patch not only addresses the performance implications of the "Adblock Plus" addon together with that particular PDF file, but it *also* improves the rendering times considerably for *all* users.
Locally, with a clean profile, the rendering times are reduced from `~2000 ms` to `~500 ms` for my setup!
Obviously, the general structure of the PDF file and its operator sequence is still hugely inefficient, however I'd say that the performance with this patch is good enough to consider the issue (as it stands) resolved.[3]
Fixes 8380.
---
[1] Not technically true, since inline images are cached from `parser.js`, but whatever :-)
[2] The two JPEG images have dimensions 1x2, respectively 4x2.
[3] To make this even more efficient, a new state would have to be added to the `QueueOptimizer`. Given that PDF files this stupid fortunately aren't too common, I'm not convinced that it's worth doing.
Currently these methods accept a large number of parameters, which creates quite unwieldy call-sites. When invoking them, you have to remember not only what arguments to supply, but also the correct order, to avoid runtime errors.
Furthermore, since some of the parameters are optional, you also have to remember to pass e.g. `null` or `undefined` for those ones.
Also, adding new parameters to these methods (which happens occasionally), often becomes unnecessarily tedious (based on personal experience).
Please note that I do *not* think that we need/should convert *every* single method in `evaluator.js` (or elsewhere in `/core` files) to take parameter objects. However, in my opinion, once a method starts relying on approximately five parameter (or even more), passing them in individually becomes quite cumbersome.
With these changes, I obviously needed to update the `evaluator_spec.js` unit-tests. The main change there, except the new method signatures[1], is that it's now re-using *one* `PartialEvalutor` instance, since I couldn't see any compelling reason for creating a new one in every single test.
*Note:* If this patch is accepted, my intention is to (time permitting) see if it makes sense to convert additional methods in `evaluator.js` (and other `/core` files) in a similar fashion, but I figured that it'd be a good idea to limit the initial scope somewhat.
---
[1] A fun fact here, note how the `PartialEvaluator` signature used in `evaluator_spec.js` wasn't even correct in the current `master`.
Note that by using `let` instead of `var` in `PartialEvaluator.setGState` and `TranslatedFont.loadType3Data`, we can get rid of further `bind` usages since `let` is block-scoped.
Also, the fact that `bind` wasn't used in the `Font` case inside of `setGState` is actually a bug which has been present ever since PR 5205, where a closure was replaced by a standard loop.[1]
---
[1] I'm not aware of any bugs caused by this, but that is probably more a happy accident than anything else, since e.g. just removing the `bind` from the `SMask` case without using block-scoped variables causes test failures.
Please see http://eslint.org/docs/rules/object-shorthand.
For the most part, these changes are of the search-and-replace kind, and the previously enabled `no-undef` rule should complement the tests in helping ensure that no stupid errors crept into to the patch.
Other PDF readers, e.g. Adobe Reader and PDFium (in Chrome), will attempt to render as much of a page as possible even if there are errors present.
Currently we just bail as soon the first error is hit, which means that we'll usually not render anything in these cases and just display a blank page instead.
NOTE: This patch changes the default behaviour of the PDF.js API to always attempt to recover as much data as possible, even when encountering errors during e.g. `getOperatorList`/`getTextContent`, which thus improve our handling of corrupt PDF files and allow the default viewer to handle errors slightly more gracefully.
In the event that an API consumer wishes to use the old behaviour, where we stop parsing as soon as an error is encountered, the `stopAtErrors` parameter can be set at `getDocument`.
Fixes, inasmuch it's possible since the PDF files are corrupt, e.g. issue 6342, issue 3795, and [bug 1130815](https://bugzilla.mozilla.org/show_bug.cgi?id=1130815) (and probably others too).
For reasons I don't pretend to understand, we're passing around `xref` arguments to a bunch of methods despite `this.xref` being available in `PartialEvaluator`.
This patch is a small first small step towards cleaning up the, often unwieldy, signatures of methods in `PartialEvaluator`.
I happened to notice that some inequalities had the wrong order, and was surprised since I thought that the `yoda` rule should have caught that.
However, reading http://eslint.org/docs/rules/yoda#options a bit more closely than previously, it's quite obvious that the `onlyEquality` option does *exactly* what its name suggests. Hence I think that it makes sense to adjust the options such that only ranges are allowed instead.
Currently the built-in CMap files are loaded in `src/core/cmap.js` using `XMLHttpRequest` directly. For some environments that might be a problem, hence this patch refactors that to instead use a factory to load built-in CMaps on the main thread and message the data to the worker thread.
This is inspired by other recent work, e.g. the addition of the `CanvasFactory`, and to a large extent on the IRC discussion starting at http://logs.glob.uno/?c=mozilla%23pdfjs&s=12+Oct+2016&e=12+Oct+2016#c53010.
Note that I initially tried to add this as a parameter to the `PDFPageProxy.render` method, such that it could be passed to `PartialEvaluator.getOperatorList`.
However, given all the different code-paths that call `getOperatorList` (there's a bunch only in `annotation.js`), this seemed to very quickly become unwieldy and thus difficult to maintain compared to simply using the existing `evaluatorOptions`.
Please see http://eslint.org/docs/rules/no-unused-vars; note that this patch purposely uses the same rule options as in `mozilla-central`, such that it fixes part of issue 7957.
It wasn't, in my opinion, entirely straightforward to enable this rule compared to the already existing rules. In many cases a `var descriptiveName = ...` format was used (more or less) to document the code, and I choose to place the old variable name in a trailing comment to not lose that information.
I welcome feedback on these changes, since it wasn't always entirely easy to know what changes made the most sense in every situation.
Given the nature of `EOF` and `isEOF`, it seems to me that they really ought to be placed in `core/primitives.js` instead.
In general, it doesn't seem great to have to depend on the entire `core/parser.js` file for such simple primitives/helper functions.
In particular, while `core/ps_parser.js` is completely separate from `core/parser.js` with regards to its function, it still depends on the latter for just *one* primitive.
Note that compared to e.g. PR 7389, this will not reduce the number of dependencies for `core/ps_parser`, however the new dependency IMHO makes more sense.
We're currently making use of `uniquePrefix`/`idCounters` in multiple files, to create unique object id's, and adding a new occurrence of them requires some care to ensure that an object id isn't accidentally reused.
Furthermore, having to pass around multiple parameters as we currently do seem like something you want to avoid.
Instead, this patch adds a factory which means that there's only *one* thing that needs to be passed around. And since it's now only necessary to call a method in order to obtain a unique object id, the details are thus abstracted away at the call-sites which avoids accidental reuse of object id's.
To test that this works as expected a very simple `Page` unit-test is added, and the existing `Annotation layer` tests are also adjusted slightly.
Using `else` after `return` is not necessary, and can often lead to unnecessarily cluttered code. By using the `no-else-return` rule in ESLint we can avoid this pattern, see http://eslint.org/docs/rules/no-else-return.
I recently happened to look at the code I wrote for PR 5964, which fixed [bug 1157493](https://bugzilla.mozilla.org/show_bug.cgi?id=1157493), and I quickly realized that the solution is way too simplistic.
The fact that only using the `length` of a `Differences` array worked seems more like a happy accident for a particular set of font data, but could just as easily be incorrect for other PDF files.
Note that in practice, the case where the `Encoding` entry is a regular `Dict` (and not a `Ref` or `Name`) is very rare, hence I don't think that we really need to worry about having to reparse this data.
Also, the performance of this code-block is quite a bit better by updating the `hash` with the data from the *entire* `Differences` array, instead of at every loop iteration.
