This appears to be consistent with the behaviour in both Adobe Reader and PDFium (in Google Chrome); this is essentially the same approach as used for a single decimal point in PR 9827.
- get original index in using a dichotomic seach instead of a linear one;
- normalize the text in using NFD;
- convert the query string into a RegExp;
- replace whitespaces in the query with \s+;
- handle hyphens at eol use to break a word;
- add some \s* around punctuation signs
With these changes, we'll now *always* replace all whitespaces with standard spaces (0x20). This behaviour is already, since many years, the default in both the viewer and the browser-tests.
- it aims to fix#14502 and bug 1721335;
- Acrobat and Pdfium do the same;
- it'll avoid to have truncated data when printed;
- change the factor to compute font size in using field height: lineHeight = 1.35*fontSize
- this is the value used by Acrobat.
- in order to not have truncated strings on the bottom, add few basic metrics for standard fonts.
- it aims to fix#14497;
- previously, only rotations with an angle 0, 90, 180 or 270 were taken into account;
- so generalize to any angle but keep the fast path for 0, 90, ... because they're likely more common than anything else.
This commit fixes Bug 1743245 (Grided PDF file lines rendered too thick) which was created by a fix for #12868 .
The lineWidth was set to round(1 * this._combinedScaleFactor) when the pixel is drawn as a parallelorgam with a height <1. This fix changes this to floor(1*this._combinedScaleFactor) .
This change shows a visual result comparable to Chrome and Acrobat.
Regarding the last PR 3 statements in canvas.js are affected and will change with this commit (stroke and paintChar).
renaming the reference files to naming comvention
- it aims to fix issue #14307;
- this event has been added recently in Firefox and we can now use it;
- fix few bugs in aform.js or in annotation_layer.js;
- add some integration tests to test keystroke events (see `AFSpecial_Keystroke`);
- make dispatchEvent in the quickjs sandbox async.
- it aims to fix https://bugzilla.mozilla.org/show_bug.cgi?id=1749563;
- use some helper functions to get (u|i)int** values in buffer: it helps to have a clearer code;
- in composite glyphes the translations values with a transformations are signed so consequently get some int8 instead of uint8;
- add few TODOs.
Please refer to https://www.pdfa.org/norm-refs/Type1Fonts.pdf#page=15 for the expected format for the /CharStrings entries.
In the referenced PDF document the /CharStrings are missing the expected end-token, which causes us to swallow the start of the next glyph name.
This patch implements this by looking for the UTF-8 BOM, i.e. `\xEF\xBB\xBF`, in order to determine the encoding.[1]
The actual conversion is done using the `TextDecoder` interface, which should be available in all environments/browsers that we support; please see https://developer.mozilla.org/en-US/docs/Web/API/TextDecoder#browser_compatibility
---
[1] Assuming that everything lacking a UTF-16 BOM would have to be UTF-8 encoded really doesn't seem correct.
In corrupt PDF documents Type3 fonts may introduce circular dependencies, thus resulting in the affected font(s) never loading and parsing/rendering never completing.
Note that I've not seen any real-world examples of this kind of font corruption, but the attached PDF document was rather found in https://github.com/pdf-association/safedocs/tree/main/Miscellaneous%20Targeted%20Test%20PDFs
*Please note:* That repository contains a number of reduced test-cases that are specifically intended to test interoperability (between PDF viewer) and parsing/rendering for various kinds of strange/corrupt PDF documents.
Some of the test-cases found there may thus not make sense to try and "fix" upfront, in my opinion, unless the problems are also found in real-world PDF documents.
While `PageViewport` apparently makes sense in TypeScript environments, given that it's being returned by the `PDFPageProxy.getViewport`-method in the API, we really don't want to extend the *public* API by simply exporting the class directly in `src/pdf.js` since it should never be called/initialized manually.
Hence we follow the same pattern as in PR 14013, and also extend the API unit-tests to ensure that `PDFPageProxy.getViewport` always returns a `PageViewport`-instance as expected.
This prevents the `BaseSVGFactory.create`-method from throwing, and thus preventing any remaining Annotations (on the page) from rendering in corrupt documents.
This helper function has never been used in e.g. the worker-thread, hence its placement in `src/shared/util.js` led to a *small* amount of unnecessary duplication.
After the previous patches this helper function is now *only* used in the viewer, hence it no longer seems necessary to expose it through the official API.
*Please note:* It seems somewhat unlikely that third-party users were relying *directly* on this helper function, which is why it's not being exported as part of the viewer components. (If necessary, we can always change this later on.)
I happened to notice that we didn't have *any* unit-tests for either `getFieldObjects` or `getCalculationOrderIds`, on the `PDFDocumentProxy` class, which seems unfortunate since it's API functionality that we depend on in e.g. the viewer.
Besides converting `Catalog.getPageDict` to an `async` method, thus simplifying the code, this patch also allows us to pro-actively fix a existing issue.
Note how we're looking up References in such a way that `MissingDataException`s won't cause trouble, however it's *technically possible* that the entries (i.e. /Count, /Kids, and /Type) in a /Pages Dictionary could actually be indirect objects as well. In the existing code this could lead to *some*, or even all, pages failing to load/render as intended.
In practice that doesn't *appear* to happen in real-world PDF documents, but given all the weird things that PDF software do I'd prefer to fix this pro-actively (rather than waiting for a bug report).
With `Catalog.getPageDict` being `async` this is now really simple to address, however I didn't want to introduce a bunch more *unconditional* asynchronicity in this method if it could be avoided (since that could slow things down). Hence we'll *synchronously* lookup the *raw* data in a /Pages Dictionary, and only fallback to asynchronous data lookup when a Reference was encountered.
In addition to the above, this patch also makes the following notable changes:
- Let `Catalog.getPageDict` *consistently* reject with the actual error, regardless of what data we're fetching. Previously we'd "swallow" the actual errors except when looking up Dictionary entries, which is inconsistent and thus seem unfortunate. As can be seen from the updated unit-tests this change is API-observable, hence why the patch is tagged `[api-minor]`.
- Improve the consistency of the Dictionary /Type-checks in both the `Catalog.getPageDict` and `Catalog.getAllPageDicts` methods.
In `Catalog.getPageDict` there's a fallback code-path where we're *incorrectly* checking the /Page Dictionary for a /Contents-entry, which is wrong since a /Page Dictionary doesn't need to have a /Contents-entry in order to be valid.
For consistency the `Catalog.getAllPageDicts` method is also updated to handle errors in the /Type-lookup correctly.
- Reduce the `PagesCountLimit.PAUSE_EAGER_PAGE_INIT` viewer constant, to further improve loading/rendering performance of the *second* page during initialization of very long documents; PR 14359 follow-up.
Most likely this code predates our use of Node.js, but in Node.js asking
for user confirmation is a solved problem, so we can remove the custom
logic we have for this, which overall makes things much simpler.
This patch circumvents the issues seen when trying to update TypeScript to version `4.5`, by "simply" fixing the broken/missing JSDocs and `typedef`s such that `gulp typestest` now passes.
As always, given that I don't really know anything about TypeScript, I cannot tell if this is a "correct" and/or proper way of doing things; we'll need TypeScript users to help out with testing!
*Please note:* I'm sorry about the size of this patch, but given how intertwined all of this unfortunately is it just didn't seem easy to split this into smaller parts.
However, one good thing about this TypeScript update is that it helped uncover a number of pre-existing bugs in our JSDocs comments.
The size of the `web/ui_utils.js` file has increased over time, as more code has been added to (or moved into) that file. To reduce its size slightly, this patch moves the event-related functionality into a separate file.
We use string arguments in all other places, so these two places are a
bit inconsistent in that sense. Moreover, it's just one argument now,
which makes it a bit easier to read and see what it does because we
don't have to pass the always-empty options argument anymore. Finally,
doing it like this ensures it works in all Puppeteer versions given
https://github.com/puppeteer/puppeteer/issues/7836.
Once the upstream bug is fixed it can be enabled again because it's
causing way too much noise now. This is tracked in issue #14293. Note
that I deliberately added a new block so we can easily remove it later
on and because the other block is about another bug.
Given that [bug 1336591](https://bugzilla.mozilla.org/show_bug.cgi?id=1336591) was just closed as fixed, thus fixing issue 8022 in Firefox, let's add a test-case to enable us to catch any future regressions either in PDF.js or in browsers themselves.
Currently the `Catalog.metadata` getter only handles errors during parsing, however in a *corrupt* PDF document fetching of the raw /Metadata can obviously fail as well.
Without this patch the `PDFDocumentProxy.getMetadata` method, in the API, can thus fail which it *never* should and this will cause the viewer to not initialize all state as expected.
Fixes one of the documents in issue 14305.
Given that [bug 1336572](https://bugzilla.mozilla.org/show_bug.cgi?id=1336572) was just closed as fixed, thus fixing issue 8019 in Firefox[1], let's add a test-case to enable us to catch any future regressions either in PDF.js or in browsers themselves.
---
[1] It also seems to be working in Google Chrome, although I'm having a slightly difficult time deciphering *exactly* what configurations were affected when looking through issue 8019.
*This patch improves handling of a couple of PDF documents from issue 14303.*
- Update `XRef.indexObjects` to actually clear *all* XRef-caches. Invalid XRef tables *usually* cause issues early enough during parsing that we've not populated the XRef-cache, however to prevent any issues we obviously need to clear that one as well.
- Improve the /Root dictionary validation in `XRef.parse` (PR 9827 follow-up). In addition to checking that a /Pages entry exists, we'll now also check that it can be successfully fetched *and* that it's of the correct type. There's really no point trying to use a /Root dictionary that e.g. `Catalog.toplevelPagesDict` will reject, and this way we'll be able to fallback to indexing the objects in corrupt documents.
- Throw an `InvalidPDFException`, rather than a general `FormatError`, in `XRef.parse` when no usable /Root dictionary could be found. That really seems more appropriate overall, since all attempts at parsing/recovery have failed. (This part of the patch is API-observable, hence the tag.)
With these changes, two existing test-cases are improved and the unit-tests are updated/re-factored to highlight that. In particular `GHOSTSCRIPT-698804-1-fuzzed.pdf` will now both load and "render" correctly, whereas `poppler-395-0-fuzzed.pdf` will now fail immediately upon loading (rather than *appearing* to work).
*Please note:* This is similar to the method that existed prior to PR 3848, but the new method will *only* be used as a fallback when parsing of corrupt PDF documents.
The implementation in PR 14311 unfortunately turned out to be *way* too simplistic, as evident by the recently added test-files in issue 14303, since it may *cause* infinite loops in `PDFDocument.checkLastPage` for some corrupt PDF documents.[1]
To avoid this, the easiest solution that I could come up with was to fallback to eagerly parsing the *entire* /Pages-tree when the /Count-entry validation fails during document initialization.
Fixes *at least* two of the issues listed in issue 14303, namely the `poppler-395-0.pdf...` and `GHOSTSCRIPT-698804-1.pdf...` documents.
---
[1] The whole point of PR 14311 was obviously to *get rid of* infinte loops during document initialization, not to introduce any more of those.
Given that we're able to "render" this document, let's extend the unit-test to actually check that we're able to obtain the operatorList; although given the overall issues in the document it'll be empty.
This only applies to severely corrupt documents, where it's possible that the `Parser` throws when we try to access e.g. a /Kids-entry in the /Pages-tree.
Fixes two of the issues listed in issue 14303, namely the `poppler-742-0.pdf...` and `poppler-937-0.pdf...` documents.
In Puppeteer 11 we noticed that Firefox doesn't shut down once the tests
are done anymore. I tracked this down to the `page.goto` call, in
`startBrowser`, never resolving anymore. I can only assume that
something changed in Puppeteer, possibly in combination with recent
Firefox Nightly versions, that caused this, but haven't been able to
fully track it down.
However, I did find that the problem is that the `load` event no longer
triggers, so fortunately we can fix the problem by explicitly waiting
for the `domcontentloaded` event instead. In general this change might
even be better since we now wait until the test framework is fully
loaded before we continue. Note that this also still works for the
current Puppeteer version.
I did find two upstream references that appear to track this issue, both
on the Puppeteer side and on the Firefox side, making me further suspect
that the issue is partly on both sides:
- https://github.com/puppeteer/puppeteer/issues/5806
- https://bugzilla.mozilla.org/show_bug.cgi?id=1706353
If a browser cannot be started, we currently get the following log:
`Error while starting firefox: [object Object]`. This is simply an
oversight from the initial Puppeteer integration work since we never got
into this code path before. With this fix the error log becomes more
useful: `Error while starting firefox: connect ECONNREFUSED ::1:45387`
*Please note:* While this patch on its own is sufficient to prevent the worker-thread from hanging, however in combination with PR 14311 these PDF documents will both load *and* render correctly.
Rather than focusing on the particular structure of these PDF documents, it seemed (at least to me) to make sense to try and prevent all circular references when fetching/looking-up data using the XRef table.
To avoid a solution that required tracking the references manually everywhere, the implementation settled on here instead handles that internally in the `XRef.fetch`-method. This should work, since that method *and* the `Parser`/`Lexer`-implementations are completely synchronous.
Note also that the existing `XRef`-caching, used for all data-types *except* Streams, should hopefully help to lessen the performance impact of these changes.
One *potential* problem with these changes could be certain *browser* exceptions, since those are generally not catchable in JavaScript code, however those would most likely "stop" worker-thread parsing anyway (at least I hope so).
Finally, note that I settled on returning dummy-data rather than throwing an exception. This was done to allow parsing, for the rest of the document, to continue such that *one* bad reference doesn't prevent an entire document from loading.
Fixes two of the issues listed in issue 14303, namely the `poppler-91414-0.zip-2.gz-53.pdf` and `poppler-91414-0.zip-2.gz-54.pdf` documents.
*This patch basically extends the approach from PR 10392, by also checking the last page.*
Currently, in e.g. the `Catalog.numPages`-getter, we're simply assuming that if the /Pages-tree has an *integer* /Count entry it must also be correct/valid.
As can be seen in the referenced PDF documents, that entry may be completely bogus which causes general parsing to breaking down elsewhere in the worker-thread (and hanging the browser).
Rather than hoping that the /Count entry is correct, similar to all other data found in PDF documents, we obviously need to validate it. This turns out to be a little less straightforward than one would like, since the only way to do this (as far as I know) is to parse the *entire* /Pages-tree and essentially counting the pages.
To avoid doing that for all documents, this patch tries to take a short-cut by checking if the last page (based on the /Count entry) can be successfully fetched. If so, we assume that the /Count entry is correct and use it as-is, otherwise we'll iterate through (potentially) the *entire* /Pages-tree to determine the number of pages.
Unfortunately these changes will have a number of *somewhat* negative side-effects, please see a possibly incomplete list below, however I cannot see a better way to address this bug.
- This will slow down initial loading/rendering of all documents, at least by some amount, since we now need to fetch/parse more of the /Pages-tree in order to be able to access the *last* page of the PDF documents.
- For poorly generated PDF documents, where the entire /Pages-tree only has *one* level, we'll unfortunately need to fetch/parse the *entire* /Pages-tree to get to the last page. While there's a cache to help reduce repeated data lookups, this will affect initial loading/rendering of *some* long PDF documents,
- This will affect the `disableAutoFetch = true` mode negatively, since we now need to fetch/parse more data during document initialization. While the `disableAutoFetch = true` mode should still be helpful in larger/longer PDF documents, for smaller ones the effect/usefulness may unfortunately be lost.
As one *small* additional bonus, we should now also be able to support opening PDF documents where the /Pages-tree /Count entry is completely invalid (e.g. contains a non-integer value).
Fixes two of the issues listed in issue 14303, namely the `poppler-67295-0.pdf` and `poppler-85140-0.pdf` documents.
For this particular PDF document, we have `/W [1 2 166666666666666666666666666]` which obviously makes no sense.
While this patch makes no attempt at actually validating the entries in the /W-array, we'll now simply abort all processing when the end of the PDF document has been reached (thus preventing hanging the browser).
Please note that this patch doesn't enable the PDF document to be loaded/rendered, but at least it fails "correctly" now.
Fixes one of the issues listed in issue 14303, namely the `REDHAT-1531897-0.pdf`document.
This bug was surprisingly difficult to track down, since it didn't just depend on range-requests being used but also on how quickly the document was loaded. To even be able to reproduce this locally, I had to use a very small `rangeChunkSize`-value (note the unit-test).
The cause of this bug is a bogus entry in the XRef-table, causing us to attempt to request data from *beyond* the actual document size and thus getting into an infinite loop.
Fixes *one* of the issues listed in issue 14303, namely the `PDFBOX-4352-0.pdf` document.
In the `BaseViewer` this cache is mostly relevant in the `disableAutoFetch = true` mode, since the pages are being initialized *lazily* in that case.
In the `PDFThumbnailViewer` this cache is mostly used for thumbnails that are actually being rendered, as opposed to those created directly from the "regular" pages.
Please note that I'm not suggesting that we remove these caches because they're only used in some situations, but rather because they're for all intents and purposes actually *redundant*. In the API itself, we're already caching both the page-promises and the actual pages themselves on the `WorkerTransport`-instance.
Hence these viewer-caches aren't really necessary in practice, and adds what to me mostly seems like an unnecessary level of indirection.[1]
Given that the viewer now relies on caching in the API itself, this patch also adds a new unit-test to ensure that page-caching works (and keep working) as expected.
---
[1] In the `WorkerTransport.getPage`-method the parameter is being validated on every call, but that's hardly enough code to warrant keeping the "duplicate" caches in the viewer in my opinion.
*Please note:* These changes will primarily benefit longer documents, somewhat at the expense of e.g. one-page documents.
The existing `PDFDocumentProxy.getStats` function, which in the default viewer is called for each rendered page, requires a round-trip to the worker-thread in order to obtain the current document stats. In the default viewer, we currently make one such API-call for *every rendered* page.
This patch proposes replacing that method with a *synchronous* `PDFDocumentProxy.stats` getter instead, combined with re-factoring the worker-thread code by adding a `DocStats`-class to track Stream/Font-types and *only send* them to the main-thread *the first time* that a type is encountered.
Note that in practice most PDF documents only use a fairly limited number of Stream/Font-types, which means that in longer documents most of the `PDFDocumentProxy.getStats`-calls will return the same data.[1]
This re-factoring will obviously benefit longer document the most[2], and could actually be seen as a regression for one-page documents, since in practice there'll usually be a couple of "DocStats" messages sent during the parsing of the first page. However, if the user zooms/rotates the document (which causes re-rendering), note that even a one-page document would start to benefit from these changes.
Another benefit of having the data available/cached in the API is that unless the document stats change during parsing, repeated `PDFDocumentProxy.stats`-calls will return *the same identical* object.
This is something that we can easily take advantage of in the default viewer, by now *only* reporting "documentStats" telemetry[3] when the data actually have changed rather than once per rendered page (again beneficial in longer documents).
---
[1] Furthermore, the maximium number of `StreamType`/`FontType` are `10` respectively `12`, which means that regardless of the complexity and page count in a PDF document there'll never be more than twenty-two "DocStats" messages sent; see 41ac3f0c07/src/shared/util.js (L206-L232)
[2] One example is the `pdf.pdf` document in the test-suite, where rendering all of its 1310 pages only result in a total of seven "DocStats" messages being sent from the worker-thread.
[3] Reporting telemetry, in Firefox, includes using `JSON.stringify` on the data and then sending an event to the `PdfStreamConverter.jsm`-code.
In that code the event is handled and `JSON.parse` is used to retrieve the data, and in the "documentStats"-case we'll then iterate through the data to avoid double-reporting telemetry; see https://searchfox.org/mozilla-central/rev/8f4c180b87e52f3345ef8a3432d6e54bd1eb18dc/toolkit/components/pdfjs/content/PdfStreamConverter.jsm#515-549
On the main thread call `driver.log` and the message will output in the
terminal with the pdf id and the message.
I've been using this a lot when trying to find certain PDFs or logging
stats.
There's obviously no guarantee that this will work in general, if the document is sufficiently corrupt, but it should hopefully be better than just throwing `InvalidPDFException` as currently happens.
Please note that, as is often the case with corrupt documents, it's somewhat difficult to know if we're rendering the document "correctly" with this patch[1]. In this case even Adobe Reader cannot open the document, which is always a good sign that it's *really* corrupt, however we're at least able to render *something* with this patch.
---
[1] Whatever "correct" even means when dealing with corrupt PDF documents, where often times different PDF viewers won't agree completely.
- it aims to fix https://bugzilla.mozilla.org/show_bug.cgi?id=931481;
- real space chars are pushed in the chunk but when there is an extra spacing, the next char position must be compared with the previous one;
- for example, an extra spacing can cancel a space so visually there are no space.
- First step to fix https://bugzilla.mozilla.org/show_bug.cgi?id=1737260;
- several interactive pdfs use the possibility to hide/show buttons to show different icons;
- render pushbuttons on their own canvas and then insert it the annotation_layer;
- update test/driver.js in order to convert canvases for pushbuttons into images.
With the previous patch, this helper function is no longer used and keeping it around will simply increase the size of the builds.
This removal is purposely done *separately*, to make it easy to revert the patch in the future if this helper function would become useful again.
This small change will help validate an important part of the upcoming re-factoring, regarding the *correct* iteration of the `Set` in the `PDFPageViewBuffer.resize` method in particular.
In `beginGroup` we create a new canvas that is the size of the
bounding box and we translate it to the offset. This means we don't need to
also apply the bounding box during `paintFormXObjectBegin`.
This improves #6961 quite a bit, but it still is missing the indention
in the ruler.
The `PDFPageViewBuffer`-code is very important for the correct function of the viewer, but it's currently not tested at all.
While the `PDFPageViewBuffer` is obviously intended to be used with `PDFPageView`-instances, it only accesses a couple of `PDFPageView` properties/methods and consequently it's fairly easy to unit-test this code with dummy-data.
These unit-tests should help improve our confidence in this code, and will also come in handy with other changes that I'm working on (regarding modernizing and re-factoring the `PDFPageViewBuffer`-code).
- it aims to fix https://bugzilla.mozilla.org/show_bug.cgi?id=1739502;
- when the target area was the current content area, everything was pushed in it instead of creating a new one (and consequently a new pageArea is created).
- the pdf shows an alignment issue on page 4:
- the hAlign is "center" but the subform was the width of its parent, so compute the real width of the subform with tb layout;
- there is an extra empty page at the end of the pdf:
- there is a subform with some hidden elements which are not rendered for now (since there is no plugged JS engine it isn't possible to draw them in changing their visibility).
- so in case a subform is empty and has no real dimensions (at least one is 0), we just consider it as empty.
We were incorrectly using the transform in the pattern before it had been
adjusted causing the pattern to be misplaced relative to the page.
Fixes: ShowText-ShadingPattern.pdf (already in corpus)
Fixes: #8111Fixes: #9243
Subfrom nomin displays even though it's subform is set to <occur max=-1 min=0>
If we look through specs of XFA 3.3 : https://www.pdfa.org/norm-refs/XFA-3_3.pdf
- The min attribute is used when processing a form that contains data. Regardless of the data at least this number of instances is included. It is permissible to set this value to zero, in which case the container is entirely excluded if there is no data for it.
However, in our case it doesn't happen, because we let our empty dataNode get through. Though by setting a clause:
- eliminate unmatched data with occur min=0
we are checking our empty data and sending it to uselessNode array where at the end it gets removed;
Note how in `PDFPageViewBuffer.resize` we're manually iterating through the visible pages in order to build a Set of the visible page `id`s. By instead moving the building of this Set into the `getVisibleElements` helper function, as part of the existing parsing, this code becomes *ever so slightly* more efficient.
Furthermore, more direct access to the visible page `id`s also come in handy in other parts of the viewer as well.
In the `BaseViewer.isPageVisible` method we no longer need to loop through the visible pages, but can instead directly check if the pageNumber is visible.
In the `PDFRenderingQueue.getHighestPriority` method, when checking for "holes" in the page layout, we can also avoid some unnecessary look-ups this way.
Very short strings can narrowly miss the existing Bidi-detection threshold, leading to incorrect text-selection and copying behaviour.
In my testing, neither Adobe Reader or PDFium seem to handle copying "correctly" for this document. Hence it's not entirely clear to me that we actually want to fix this, since tweaking these heuristics can *obviously* cause regressions elsewhere (and our test coverage for RTL-text isn't exactly great).
It seems that issue 10301 was fixed by PR 13424, by combining the spans, however given that we don't have a lot of test coverage for RTL-text I figured that adding a simple reference test wouldn't hurt (rather than just closing the issue as WORKSFORME).
There were some links not working in some XFA files,I realized that the anchor tag that contains the link has an inline display and couldn't receive any height, solved this by adding a "position: absolute". Tested with two different files in Firefox Nightly and Chrome and now all links are working perfectly fine. Added reftest to avoid future regressions
The old method of handling soft masks had a number of issues where the temporary
drawing canvas and the suspended main canvas could get out of sync
(e.g. mismatched save/restores or clip state) or we could end up compositing at
the wrong time. A good example of things getting out sync is the reduced test
case in #9017.
To fix this I've changed two big things:
1) Duplicate all the needed graphics state from the temporary canvas to the
suspended main canvas. This ensure the canvases stay in sync so that when we
switch back to the main canvas the graphics state stack is the same
(e.g. transforms, clip paths).
2) Immediately composite after each drawing operation. This ensures that if
there's an active clip region that we'll still be able to composite the correct
portions of the canvas. Note: This solution could be avoided by using
getImageData and putImageData since those ignore clipping region, but this is
very very slow. Note2: I also think the old way of only compositing at the end
of the soft mask is incorrect and can lead to wrong colors if drawing over the
same region, but in practice this doesn't seem to matter much.
Fixes: #5781Fixes: #5853Fixes: #7267Fixes: #7891Fixes: #8403Fixes: #8624Fixes: #12798Fixes: #13891Fixes: #9017 (reduced test case)
Fixes: https://bugzilla.mozilla.org/show_bug.cgi?id=1703683
With ESLint 8 we should now finally be able to start using modern `class` features, see https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Classes/Public_class_fields and https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Classes/Private_class_fields
However, while both ESLint and Acorn now support this, it unfortunately turns out that Escodegen (which we use during building) still lack the necessary support. Looking at https://github.com/estools/escodegen there's not been any updates since last year, and there's also open PRs adding support for these new `class` features.
To avoid blocking usage of these `class` features in the PDF.js code-base, in particular *private* fields/methods, this patch thus proposes that we (hopefully temporarily) switch to an `escodegen` fork that has the necessary support; please see https://www.npmjs.com/package/@javascript-obfuscator/escodegen
While I have no reason to doubt the security of the `escodegen` fork, this patch nonetheless pins the version number. Furthermore, I've also diffed the output of the two `.js`-files in this forked package against the original files without finding anything that looks immediately "dangerous".
Trying to render these Annotation-types, when the borderWidth is `0`, causes a "hairline" border to appear. If these Annotations included an appearance stream, as they are supposed to, this wouldn't have happened and the simplest solution here seem to be to just ignore these particular Annotations.
- PR #13257 fixed a lot of issues but not all and this patch aims to fix almost all remaining issues.
- the idea in this new patch is to compare position of new glyph with the last position where a glyph has been drawn;
- no space are "drawn": it just moves the cursor but they aren't added in the chunk;
- so this way a space followed by a cursor move can be treated as only one space: it helps to merge all spaces into one.
- to make difference between real spaces and tracking ones, we used a factor of the space width (from the font)
- it was a pretty good idea in general but it fails with some fonts where space was too big:
- in Poppler, they're using a factor of the font size: this is an excellent idea (<= 0.1 * fontSize implies tracking space).
*Please note:* This is a tentative patch, since I don't have the necessary a11y-software to actually test it.
To avoid having to add a new API-method just for a single string, I figured that adding the new property to the existing `documentInfo`-data (accessed via `PDFDocumentProxy.getMetadata` in the API) will hopefully be deemed acceptable.
Looking at the code, I do have to agree with the point made in issue 12731 about it being unexpected/unhelpful that the `PDFFindController.executeCommand`-method isn't directly usable with the "find"-event.
The reason for it being this way is, as so often, for historical reasons: The `executeCommand`-method was added (just) prior to the introduction of the `EventBus` in the viewer.
Obviously we cannot simply change the existing `PDFFindController.executeCommand`-method, since that'd be a breaking change in code which has existed for over five years.
Initially I figured that we could simply add a new method in `PDFFindController` that'd accept the state from the "find"-event, however after thinking about this and looking through the use-cases in the default viewer I settled on a slightly different approach: Let the `PDFFindController` just listen for the "find"-event (on the `EventBus`-instance) directly instead, which also removes one level of (unneeded) indirection during searching in the default viewer.
For GENERIC builds of the PDF.js library, the old `PDFFindController.executeCommand`-method is still available with a deprecation warning.
If a PDF included an embedded TrueType font whose preferred character
map (cmap) was in "format 2", the code would select that character map
and then refuse to read it because of an unsupported format, thus
causing the characters not to be rendered. This commit implements
support for format 2 as described at the link below.
https://developer.apple.com/fonts/TrueType-Reference-Manual/RM06/Chap6cmap.html
This is unfortunately *yet another* bug in the `preEvaluateFont`-implementation, and I've lost count of the number of times I've had to tweak this code over the years :-(
I really cannot help thinking that PR 4423 was way too simplistic, since it missed a bunch of cases that leads to broken font rendering in many PDF documents.
Fixes https://bugzilla.mozilla.org/show_bug.cgi?id=1734802
Note how both the annotationLayer and the document outline will apply various URL-related options when creating the link-elements.
For consistency the `xfaLayer`-rendering should obviously use the same options, to ensure that the existing options are indeed applied to all URLs regardless of where they originate.
- it aims to fix#12721.
- Thanks to PR #14023, we've now the fieldObjects in the annotation layer so we can easily map fields names on their id if needed.
- Reset values in the storage, in the JS sandbox and in the visible html elements.
In the referenced bug, the embedded fonts contain custom CMap-data that only include strings. Note how for embedded composite TrueType fonts we're using the CMap-data when building the glyph mapping, and currently we end up with a completely empty map because the code expects only CID *numbers*.
Furthermore, just fixing the glyph mapping alone isn't sufficient to fully address the bug, since we also need to consider this "special" kind of CMap-data when looking up glyph widths.
Having recently worked with, and reviewed patches touching, this code it seemed that it's probably not a bad idea to move that functionality into `createValidAbsoluteUrl` as new options instead.
For the `addDefaultProtocolToUrl` functionality in particular, the existing helper function was not only moved but slightly improved as well. Looking at the code, I realized that there's a small risk that it would incorrectly match a *relative* URL-string too.
With these changes, the `createValidAbsoluteUrl` call-sites in the `src/core/`-code can be simplified a little bit.
*Please note:* This patch may, indirectly, change the format of the `unsafeUrl`-property returned with relevant Annotations and OutlineItems; hence the `api-minor` tag.
However, I'd argue that it's actually more correct this way since the whole purpose of `unsafeUrl` is/was to return the URL data as-is without any parsing done.
- it aims to fix https://bugzilla.mozilla.org/show_bug.cgi?id=1716758;
- some buttons have a JS action with the pattern `app.launchURL(...)` (or similar) so extract when it's possible the url and generate a <a> element with the href equals to the found url;
- pdf.js already had some code to handle that so this patch slightly refactor that.
- it aims to fix#14021;
- the N dict is empty here so just create a default one;
- it implies that the checked checkbox has no appearance so create a default one too in order to print it;
- in the pdf in the issue, a checked box is not printed because it has no default appearance so we need to guess its appearance from its state.
In order to implement this, we utilize the existing `bidi` function to infer the text-direction of /T and /Contents entries. While this may not be perfect in cases where one PopupAnnotation mixes LTR and RTL languages, it should work well enough in most cases.
To avoid having to add *two new* properties in lots of annotations, supplementing the existing `title`/`contents`-properties, this patch instead re-factors the existing code such that the properties are replaced by Objects (containing `str` and `dir`).
*Please note:* In order avoid breaking existing third-party implementations, `GENERIC`-builds of the PDF.js library will still provide the old `title`/`contents`-properties on annotations returned by `PDFPageProxy.getAnnotations`.
- In the pdf in issue #14071, some select fields don't contain any values;
- the corresponding node has a bindItems and a bind elements and _bindItems function was just not called.
With this patch we'll ensure that only valid absolute URLs can be used in XFA documents, similar to the existing validation done for "regular" PDF documents.
Furthermore, we'll also attempt to add a default protocol (i.e. `http`) to URLs beginning with "www." in XFA documents as well; this on its own is enough to fix https://bugzilla.mozilla.org/show_bug.cgi?id=1731240
Rather than re-computing this value in a number of different places throughout the code-base[1], we can expose this in the API via the existing `PixelsPerInch`-structure instead.
There's also been feature requests asking for the old `CSS_UNITS` viewer constant to be made accessible, such that it could be used in third-party implementations.
I suppose that it could be argued that it's somewhat confusing to place a unitless property in `PixelsPerInch`, however given that the `PDF_TO_CSS_UNITS`-property is defined strictly in terms of the existing properties this is hopefully deemed reasonable.
---
[1] These include:
- The viewer, with the `CSS_UNITS` name.
- The reference-tests.
- The display-layer, when rendering images; see PR 13991.
Currently we only exclude /Encoding entries that also contains a /Differences array, which is the cause of the text-selection problem in the referenced issue.
In order to address this we'll now also exclude /Encoding entries that contain one of the predefined *named* encodings, and no longer require that it also contains a /Differences array.
*Please note:* This patch cases a small "regression" in the `bug1130815-text` test-case, however this is actually an improvement when compared with Adobe Reader and PDFium (in Google Chrome).
- it aims to fix https://bugzilla.mozilla.org/show_bug.cgi?id=1719148;
- JS can set a property for a non-rendered annotation using the annotationStorage but the other unset default properties must be used when the annotation is finally rendered;
- so this patch just adds the properties already set in the annotationStorage to the default value.
Rather than forcing the "regular" `EventBus` to check and handle `isInAutomation` for every `dispatch` call, we can take advantage of subclassing instead.
Hence this PR introduces a new `AutomationEventBus` class, which extends `EventBus`, and is used by the default viewer when `isInAutomation === true`.
In this particular case the `CMap`-data that we create contains only numbers, but no strings, which causes `PartialEvaluator.readToUnicode` to create a ToUnicode-map with only empty strings.
*Please note:* This is yet another case where I don't know if it's necessarily the best and most correct solution, but it does fix the referenced issue.
- it aims to fix https://bugzilla.mozilla.org/show_bug.cgi?id=1722036.
- AS and V should share the same value for checkbox: it's at least what the specs say;
- the pdf in the above bug opens correctly in Acrobat so it likely means that AS is chosen over V.
*Please note:* All of this feels very handwavy, but at least it passes all tests locally. Hopefully we have enough tests for this part of the font code.
For non-embedded composite standard fonts with an "incomplete" /CIDToGIDMap, we'll now fallback to an *explicitly defined* /ToUnicode map even when that one happens to be an /Identity-H or /Identity-V map.
The `Font.fallbackToSystemFont` method is unfortunately getting more and more special-cases, however that might be unavoidable given all the weird non-embedded fonts found in the wild :-(
*This fixes something that I noticed, having recently looked at both the `Lexer.getObj` and `writeValue` code.*
Please note that I unfortunately don't have an example of a form where saving fails without this patch. However, given its overall simplicity and that unit-tests are added, it's hopefully deemed useful to fix this potential issue pro-actively rather than waiting for a bug report.
At this point one might, and rightly so, wonder if there's actually any real-world PDF documents where a `null` value is being used?
Unfortunately the answer is *yes*, and we have a couple of examples in the test-suite (although none of those are related to forms); please see: `issue1015`, `issue2642`, `issue10402`, `issue12823`, `issue13823`, and `pr12564`.
While some of the output looks worse to my eye, this behavior more
closely matches what I see when I open the PDFs in Adobe acrobat.
Fixes: #4706, #9713, #8245, #1344
Currently it's possible to accidentally, e.g. by simply copy-and-pasting from an existing test-case, add an unnecessary `"link": true`-entry for locally available PDF files.
This leads to inconsistencies in the manifest file, and doesn't feel like a great developer experience. However we can easily fix it by having `verifyManifestFiles` fail in this situation, and doing so actually turned up a couple of existing cases.
In the referenced PDF document the /Contents stream contains MarkedContent-operators, however no optional content dictionary exists; according to [the specification](https://www.adobe.com/content/dam/acom/en/devnet/pdf/pdfs/PDF32000_2008.pdf#G7.3883825):
> Null values or references to deleted objects shall be ignored. If this entry is
not present, is an empty array, or contains references only to null or deleted
objects, the membership dictionary shall have no effect on the visibility of
any content.
In the PDF document some of the glyphs have bogus `differences`-entries[1] that cannot be resolved to valid glyph names, thus causing the glyph mapping to fail.
My initial idea was to use a similar approach as in the `PartialEvaluator._simpleFontToUnicode`-method, to extract the charCodes from those entries, however it turned out that that didn't actually help in this case (the mapping was still wrong).
To fix this I'm thus proposing that we fallback to the /ToUnicode map when no other useable data exists (e.g. no post-table), since it *hopefully* shouldn't make things any worse than leaving parts of the glyph map empty (which currently happens).
---
[1] As can be seem below, some of the entries are completely normal while others are non-standard:
```
Differences (array)
0 = 65
1 = /g5167
2 = /space
3 = /g11927
4 = /g17737
5 = /g11540
6 = /g2180
7 = /K
8 = /P
9 = /two
10 = /zero
11 = /one
12 = /five
13 = /four
14 = /g6932
15 = /g7246
16 = /g1691
17 = /g2343
18 = /g14792
19 = /g3325
20 = /g4280
21 = /g20383
22 = /g18166
23 = /g16988
24 = /g17943
25 = /g19223
26 = /g10830
27 = 97
28 = /g982
29 = /g1226
30 = /g5059
31 = /g2677
32 = /g1042
33 = /g11568
34 = /L
35 = /three
36 = /seven
37 = /g2364
38 = /g12063
39 = /g5356
40 = /g2173
41 = /g17877
42 = /g7273
43 = /g7647
44 = /g7224
45 = /g19327
46 = /g5054
47 = /g2342
48 = /g10136
49 = /g6856
50 = /g13381
51 = /g7257
52 = /g12093
53 = /g2359
```
- aims to fix https://bugzilla.mozilla.org/show_bug.cgi?id=1720179
- in some pdfs the XFA array in AcroForm dictionary doesn't contain an entry for 'datasets' (which contains saved data), so basically this patch allows to overwrite the AcroForm dictionary with an updated XFA array when doing an incremental update.
- when some named nodes in the template don't have their counterpart in datasets we create some nodes: the main node mustn't belong to the datasets namespace because it doesn't make sense and Acrobat Reader isn't able to read pdf with such nodes.
- so created nodes under a datasets node have a namespaceId set to -1 and consequently when serialized no namespace prefix will appear.
There's a fair number of regular expressions througout the code-base which are slightly more verbose than strictly necessary, in particular:
- We have a lot of regular expressions that use `[0-9]` explicitly, and those can be simplified to use `\d` instead.
- We have one instance of a regular expression containing a `A-Za-z0-9_` sequence, which can be simplified to use `\w` instead.
Despite its name, the fonts in ItcSymbol-family are "regular" fonts and not Symbol ones. However, given that the font name contains the word "Symbol" we ended up picking the wrong code-path in the `Font.fallbackToSystemFont`-method.
*Please note:* While this patch ensures that the text becomes readable, by falling back a standard font, the rendering will obviously not be perfect. However, that's the PDF generators "fault" since non-embedded fonts cannot be guaranteed to render correctly in all environments.
Currently, in the `PartialEvaluator`, we only support Optional Content in Form-/XObjects. Hence this patch adds support for Image-/XObjects as well, which looks like a simple oversight in PR 12095 since the canvas-implementation already contains the necessary code to support this.
The Viewer API definitions do not compile because of missing imports and
anonymous objects are typed as `Object`. These issues were not caught
during CI because the test project was not compiling anything from the
Viewer API.
As an example of the first problem:
```
/**
* @implements MyInterface
*/
export class MyClass {
...
}
```
will generate a broken definition that doesn’t import MyInterface:
```
/**
* @implements MyInterface
*/
export class MyClass implements MyInterface {
...
}
```
This can be fixed by adding a typedef jsdoc to specify the import:
```
/** @typedef {import("./otherFile").MyInterface} MyInterface */
```
See https://github.com/jsdoc/jsdoc/issues/1537 and
https://github.com/microsoft/TypeScript/issues/22160 for more details.
As an example of the second problem:
```
/**
* Gets the size of the specified page, converted from PDF units to inches.
* @param {Object} An Object containing the properties: {Array} `view`,
* {number} `userUnit`, and {number} `rotate`.
*/
function getPageSizeInches({ view, userUnit, rotate }) {
...
}
```
generates the broken definition:
```
function getPageSizeInches({ view, userUnit, rotate }: Object) {
...
}
```
The jsdoc should specify the type of each nested property:
```
/**
* Gets the size of the specified page, converted from PDF units to inches.
* @param {Object} options An object containing the properties: {Array} `view`,
* {number} `userUnit`, and {number} `rotate`.
* @param {number[]} options.view
* @param {number} options.userUnit
* @param {number} options.rotate
*/
```
*This is a follow-up to PRs 13867 and 13899.*
This patch is tagged `api-minor` for the following reasons:
- It replaces the `renderInteractiveForms`/`includeAnnotationStorage`-options, in the `PDFPageProxy.render`-method, with the single `annotationMode`-option that controls which annotations are being rendered and how. Note that the old options were mutually exclusive, and setting both to `true` would result in undefined behaviour.
- For improved consistency in the API, the `annotationMode`-option will also work together with the `PDFPageProxy.getOperatorList`-method.
- It's now also possible to disable *all* annotation rendering in both the API and the Viewer, since the other changes meant that this could now be supported with a single added line on the worker-thread[1]; fixes 7282.
---
[1] Please note that in order to simplify the overall implementation, we'll purposely only support disabling of *all* annotations and that the option is being shared between the API and the Viewer. For any more "specialized" use-cases, where e.g. only some annotation-types are being rendered and/or the API and Viewer render different sets of annotations, that'll have to be handled in third-party implementations/forks of the PDF.js code-base.
Moves the logic out of TextLayerBuilder to handle
highlighting matches into a new separate class `TextHighlighter`
that can be used with regular PDFs and XFA PDFs.
To mimic the current find functionality in XFA, two arrays
from the XFA rendering are created to get the text content
and map those to DOM nodes.
Fixes#13878
This patch removes the only remaining closure in the `src/display/api.js` file, utilizing a similar approach as used in lots of other parts of the code-base, which results in a small decrease in the size of the *build* `pdf.js` file.
Given that `PDFWorker` is exposed through the *public* API, this complicates things somewhat since there's a couple of worker-related properties that really should stay *private*. Initially, while working on PR 13813, I believed that we'd need support for private (static) class fields in order to get rid of this closure, however I've managed to come up with what's hopefully deemed an acceptable work-around here.
Furthermore, some helper functions were simply moved into the `PDFWorker` class as static methods, thus simplifying the overall implementation (e.g. we don't need to manually cache the Promise in the `PDFWorker._setupFakeWorkerGlobal`-method).
Finally, as part of this re-factoring a number of missing JSDoc-comments were added which *together* with the removal of the closure significantly improves the `gulp jsdoc` output for the `PDFWorker` class.
*Please note:* This patch is tagged with `api-minor` since it deprecates `PDFWorker.getWorkerSrc()` in favor of the shorter `PDFWorker.workerSrc`, with the fallback limited to `GENERIC` builds.
It shouldn't be necessary to assign these variables to the global scope (as far as I can tell), either explicitly with `window` or implicitly with `var`, and this way we don't need to disable the ESLint `no-undef` rule; fixes another small part of issue 13862.
*Please note:* I wasn't going to put additional work into this code after PR 13869, however these changes looked so simple that I figured trying to get rid of the few remaining "Code scanning alerts" wouldn't hurt.
However, this file would still very much benefit from additional clean-up and re-factoring work, since it's quite old and currently contains some dead code (commented out).
With the changes made in PR 13746 the *internal* renderingIntent handling became somewhat "messy", since we're now having to do string-matching in various spots in order to handle the "oplist"-intent correctly.
Hence this patch, which implements the idea from PR 13746 to convert the `intent`-strings, used in various API-methods, into an *internal* renderingIntent that's implemented using a bit-field instead. *Please note:* This part of the patch, in itself, does *not* change the public API (but see below).
This patch is tagged `api-minor` for the following reasons:
1. It changes the *default* value for the `intent` parameter, in the `PDFPageProxy.getAnnotations` method, to "display" in order to be consistent across the API.
2. In order to get *all* annotations, with the `PDFPageProxy.getAnnotations` method, you now need to explicitly set "any" as the `intent` parameter.
3. The `PDFPageProxy.getOperatorList` method will now also support the new "any" intent, to allow accessing the operatorList of all annotations (limited to those types that have one).
4. Finally, for consistency across the API, the `PDFPageProxy.render` method also support the new "any" intent (although I'm not sure how useful that'll be).
Points 1 and 2 above are the significant, and thus breaking, changes in *default* behaviour here. However, unfortunately I cannot see a good way to improve the overall API while also keeping `PDFPageProxy.getAnnotations` unchanged.
Given that issue 13862 tracks updating/modernizing the code, this patch purposely limits the scope of the changes. In particular, the following things are still left to address:
- The ESLint `no-undef` errors; for now the rule is simply disabled globally in this file.
- A couple of unused variables are commented out for now, but could perhaps just be removed.
The new command is a *variation* of the standard `gulp test` command and will run all unit/font/integration-tests just as normal, while *only* running ref-tests for XFA-documents to speed up development.
Given that we currently have (some) unit-tests for XFA-documents, and that we may also (in the future) want to add integration-tests, it thus makes sense to run all test-suites in my opinion.
*Please note:* Once this patch has landed, I'll submit a follow-up patch to https://github.com/mozilla/botio-files-pdfjs such that we can also run the new command on the bots.
Given how trivial the `isEOF` function is, we can simply inline the check at the various call-sites and remove the function (which ought to be ever so slightly more efficient as well).
Furthermore, this patch also changes the `EOF` primitive itself to a `Symbol` instead of an Object since that has the nice benefit of making it unclonable (thus preventing *accidentally* trying to send `EOF` from the worker-thread).
Given that the GitHub Advanced Security workflow now covers everything that LGTM does, but generally faster and with better GitHub-integration, there's no longer much point in also running LGTM separately.
As a follow-up to this patch, we should also disable/remove the LGTM-integration from the PDF.js repository.
This patch utilizes the same approach as used in lots of other parts of the code-base, which thus *slightly* reduces the size of this code.
By removing some of the (current) indirection, we can also simplify the JSDocs a little bit. Looking at the `gulp jsdoc` output, this actually seem to *improve* the documentation for this class.
- All the scale factors in for the substitution font were wrong because of different glyph positions between Liberation and the other ones:
- regenerate all the factors
- Text may have polish chars for example and in this case the glyph widths were wrong:
- treat substitution font as a composite one
- add a map glyphIndex to unicode for Liberation in order to generate width array for cid font
- In order to better compute text fields size, use line height with no gaps (and consequently guessed height for text are slightly better in general).
- Fix default background color in fields.
- an Image element was created, attached to its parent but the $globalData property was not set and that led to an error.
- the pdf in bug 1722029 has 27 rendered rows (checked in Acrobat) when only one was displayed: this patch some binding issues around the occur element.
This patch makes use of the existing `ignoreErrors` option, thus allowing a page to continue parsing/rendering even if (some of) its sub-streams are corrupt. Obviously this may cause *part* of a page to be broken/missing, however it should be better than (potentially) rendering nothing.
Also, to the best of my knowledge, this is the first bug of its kind that we've encountered.
To avoid having to pass in a bunch of, for a `BaseStream`-instance, mostly unrelated parameters when initializing a `StreamsSequenceStream`-instance, I settled on utilizing a callback function instead to allow conditional Error-suppression.
Note that the `StreamsSequenceStream`-class is a *special* stream-implementation that we only use when the `/Contents`-entry, in the `/Page`-dictionary, consists of an Array with streams.
Most of the warnings we don't really care about, and those are simply white-listed using inline comments; however two cases prompted actual code changes:
- In `src/display/pattern_helper.js` the branch in question is indeed unreachable, and should thus be safe to remove. (This code originated in PR 4192, which is now over seven years ago.)
- In `test/test.js`, the function in question indeed doesn't accept any arguments. (The patch also re-formats a string just above, which didn't seem worthy of a separated patch.)
This now leaves only *one* warning in the LGTM report, however that one is a false positive that we'll need to report upstream.
In cases where even the very *first* attempt at reading from an object will throw, simply ignoring such objects will help improve rendering of *some* corrupt documents.
Note that this will lead to more parsing in some cases, but considering that this only applies to *corrupt* documents that shouldn't be a big deal.
Bug 1721218 has a shading pattern that was used thousands of times.
To improve performance of this PDF:
- add a cache for patterns in the evaluator and only send the IR form once
to the main thread (this also makes caching in canvas easier)
- cache the created canvas radial/axial patterns
- for shading fill radial/axial use the pattern directly instead of creating temporary
canvas
