The viewer doesn't currently support executing of any JavaScript, as found in some PDF documents, for security reasons. (Although there's a small hack to at least provide basic support for automatic printing on document load, without running scripts.)
However, in the event that the browser doesn't support printing we're not run *any* of this code. In particular that means that we're also not displaying the "Warning: JavaScript is not supported" message, which seems strange since JavaScript found in a PDF document can really contain *anything* (and not only printing instructions).
It thus seem reasonable, as far as I'm concerned, to always display the JavaScript-warning *even* if printing happens to be unsupported.
*This is part of a series of patches that will try to split PR 11566 into smaller chunks, to make reviewing more feasible.*
Once all the code has been fixed, we'll be able to eventually enable the ESLint `no-shadow` rule; see https://eslint.org/docs/rules/no-shadow
There's a couple of issues with this functionality:
- The respective `PromiseCapability` instances are not being reset, in `BaseViewer._resetView`, when the document is closed which is inconsistent with all other state.
- While the default viewer depends on these promises, and they thus ought to be considered part of e.g. the `PDFViewer` API-surface, they're not really defined in a particularily user-visible way (being that they're attached to the `BaseViewer` instance *inline* in `BaseViewer.setDocument`).
- There's some internal `BaseViewer` state, e.g. `BaseViewer._pageViewsReady`, which is tracked manually and could instead be tracked indirectly via the relevant `PromiseCapability`, thus reducing the need to track state *twice* since that's always best to avoid.
*Please note:* In the existing implementation, these promises are not defined *until* the `BaseViewer.setDocument` method has been called.
While it would've been simple to lift that restriction in this patch, I'm purposely choosing *not* to do so since this ensures that any Promise handlers added inside of `BaseViewer.setDocument` are always invoked *before* any external ones (and keeping that behaviour seems generally reasonable).
This patch deprecates the existing `getOpenActionDestination` API method, in favor of a better and more general `getOpenAction` method instead. (For now JavaScript actions, related to printing, are still handled as before.)
By clearly separating "regular" Print actions from the JavaScript handling, it's thus possible to get rid of the somewhat annoying and strictly incorrect warning when the viewer loads.
Since the goal has always been, essentially since the `EventBus` abstraction was added, to remove all dispatching of DOM events[1] from the viewer components this patch tries to address one thing that came up when updating the examples:
The DOM events are always dispatched last, and it's thus guaranteed that all internal event listeners have been invoked first.
However, there's no such guarantees with the general `EventBus` functionality and the order in which event listeners are invoked is *not* specified. With the promotion of the `EventBus` in the examples, over DOM events, it seems like a good idea to at least *try* to keep this ordering invariant[2] intact.
Obviously this won't prevent anyone from manually calling the new *internal* viewer component methods on the `EventBus`, but hopefully that won't be too common since any existing third-party code would obviously use the `on`/`off` methods and that all of the examples shows the *correct* usage (which should be similarily documented on the "Third party viewer usage" Wiki-page).
---
[1] Looking at the various Firefox-tests, I'm not sure that it'll be possible to (easily) re-write all of them to not rely on DOM events (since getting access to `PDFViewerApplication` might be generally difficult/messy depending on scopes).
In any case, even if technically feasible, it would most likely add *a lot* of complication that may not be desireable in the various Firefox-tests. All-in-all, I'd be fine with keeping the DOM events only for the `MOZCENTRAL` target and gated on `Cu.isInAutomation` (or similar) rather than a preference.
[2] I wouldn't expect any *real* bugs in a custom implementation, simply based on event ordering, but it nonetheless seem like a good idea if any "external" events are still handled last.
To avoid outright breaking third-party usages of the "viewer components" the `getGlobalEventBus` functionality is left intact, but a deprecation message is printed if the function is invoked.
The various examples are updated to *explicitly* initialize an `EventBus` instance, and provide that when initializing the relevant viewer components.
This complements the existing `PDFViewerApplication.initialized` boolean property, and may be helpful for custom implementations of the default viewer. This will thus provide users of the default viewer an alternative to setting the preference to dispatch events to the DOM (and listen for the "localized" event), since they can instead use:
```javascript
document.addEventListener("webviewerloaded", function() {
PDFViewerApplication.initializedPromise.then(function() {
// The viewer has now been initialized.
})
});
```
Note that in order to avoid manually tracking the initialization state *twice*, this implementation purposely uses the `PromiseCapability` functionality to handle both `PDFViewerApplication.initialized` and `PDFViewerApplication.initializedPromise` internally.
There's no particular reason for using the PDF.js helper function `createObjectURL`[1] in the debugger, instead of the native `URL.createObjectURL` directly, for a couple of reasons:
- The relevant code-path only applies to fonts loaded with the Font Loading API, and this isn't supported in IE anyway.
- The debugger can, since quite some time, not even be loaded in IE any more.
- General support for IE is now limited, and there's no guaratee that everything actually works.
---
[1] It provides a fallback for browsers with broken `Blob` support, which as usual means Internet Explorer :-P
The debugging hash parameters[1] are intended to facilitate access to various tools/settings in PRODUCTION builds, protected by the `pdfBugEnabled` preference.
At this point, the remaining debugging hash parameters are mainly intended to allow access to the `PDFBug` tools and/or to quickly toggle certain larger features.
The "useOnlyCssZoom" functionality doesn't really seem to fit in with the rest of these hash parameters, since:
- This is, comparatively speaking, a minor viewer-specific feature.
- The zooming implementation will (almost) always fallback to CSS-only zooming, for any document, once the canvases becomes large enough. Hence, the majority of the CSS zooming feature can still be tested *directly* in any build of the viewer.
- After the initial implementation, years ago, the CSS-only zooming code in question hasn't changed much (or even at all), i.e. it doesn't seem like an active development target.[2]
- If the "useOnlyCssZoom" functionality was added today, it's unlikely that a hash parameter would've been added.
- Last, but not least, there's also a `useOnlyCssZoom` preference hence toggling this functionality shouldn't be too difficult (e.g. if someone needs to hack on it).
All in all, I'm thus suggesting that we remove the "useOnlyCssZoom" hash parameter.
---
[1] Originally these hash parameters could be used directly in any build, which was bad since it would allow any link to potentially disable functionality and/or reduce performance.
[2] If it had seen active development over the years, I'd be *much* more inclined to keep the hash parameter.
For people running e.g. Firefox with the `pdfBugEnabled` preference set, to allow quick access to debugging tools, this method will obviously run for every opened PDF file. However, in most cases the URL hash is empty and we can thus skip most of the parsing and simply return early instead.
This removes a couple of, thanks to preceeding code, unnecessary `typeof PDFJSDev` checks, and also fixes a couple of incorrectly implemented (my fault) checks intended for `TESTING` builds.
After PR 9566, which removed all of the old Firefox extension code, the `FIREFOX` build flag is no longer used for anything.
It thus seems to me that it should be removed, for a couple of reasons:
- It's simply dead code now, which only serves to add confusion when looking at the `PDFJSDev` calls.
- It used to be that `MOZCENTRAL` and `FIREFOX` was *almost* always used together. However, ever since PR 9566 there's obviously been no effort put into keeping the `FIREFOX` build flags up to date.
- In the event that a new, Webextension based, Firefox addon is created in the future you'd still need to audit all `MOZCENTRAL` (and possibly `CHROME`) build flags to see what'd make sense for the addon.
While only the `MOZCENTRAL` builds will actually do anything meaningful with the telemetry data, none of the code in question actually runs *at all* in e.g. development mode.[1]
This seems bad since it essentially means that this code is completely untested, despite being quite important for the built-in Firefox PDF viewer, and this thus ought to be fixed.
In this case, the explanation for the current state of the code should be "for historical reasons". Before the viewer was split into the current components and before the pre-processor was improved, back when all code resided in the `web/viewer.js` file, the telemetry reporting was done with *direct* `FirefoxCom` calls. However, with the dummy `DefaultExternalServices.reportTelemetry` method there's nothing actually preventing attempting to report telemetry in any type of build.
NOTE: By running this code in GENERIC builds as well, in addition to just locally, the *viewer* part of telemetry reporting becomes tested e.g. in preview builds too which should help with reviewing.
---
[1] When fixing bug 1606566, I had to edit the relevant `PDFJSDev` checks to be able to actually test the changes locally.
With https://bugzilla.mozilla.org/show_bug.cgi?id=844349 now being fixed in Firefox, the textLayer will now actually stay hidden as intended regardless of the browser settings.
Hence it should no longer be necessary to display the fallback bar, nor print a warning in the console, for documents which contains a textLayer.
Besides removing the `supportsDocumentColors` methods in the default viewer, we can also remove a now unused l10n string.
In order to eventually get rid of SystemJS and start using native `import`s instead, we'll need to provide "complete" file identifiers since otherwise there'll be MIME type errors when attempting to use `import`.
When working on PR 11463 I couldn't help thinking that the `Array.prototype.some` callback function, used when determining the generator, was somewhat difficult to read with its partly unused and strangely named parameters.
This covers the handful of cases that the `--fix` command couldn't deal with, and the changes aren't just fixing the linting errors but attempt to slightly improve the relevant code.
Please find additional details about the ESLint rule at https://eslint.org/docs/rules/prefer-const
Note that this patch is generated automatically, by using the ESLint `--fix` argument, and will thus require some additional clean-up (which is done separately).
Rather than having a copy of this regular expression in the `test/unit/api_spec.js` file, with a comment about keeping it up-to-date with the code in the viewer (note the incorrect file reference as well), we can just import it instead to simplify all of this.
This patch makes the follow changes:
- Remove no longer necessary inline `// eslint-disable-...` comments.
- Fix `// eslint-disable-...` comments that Prettier moved down, thus causing new linting errors.
- Concatenate strings which now fit on just one line.
- Fix comments that are now too long.
- Finally, and most importantly, adjust comments that Prettier moved down, since the new positions often is confusing or outright wrong.
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
Apparently Ghostscript can, in some cases, generate/include `Metadata` with incorrectly encoded characters.[1] This results in the viewer title looking wrong, which we thus attempt to avoid by falling back to the `Info` entry instead.
*Please note:* Obviously it would be better if this was fixed in the `Metadata` parser instead, rather than using a viewer work-around, but I'm just not sure how or even *if* that could actually be done given that the `Metadata` stream contains no trace of the *original* character.
Fixes https://bugzilla.mozilla.org/show_bug.cgi?id=1605526
---
[1] The problematic characters are from the Specials Unicode block, see https://en.wikipedia.org/wiki/Specials_(Unicode_block)
With these changes we'll always set the `pdfTitle` to the `Info` dictionary entry *first* (assuming it exists and isn't empty), before attempting to override it with the `Metadata` stream entry (assuming it exists, is non-empty *and* valid).
There should be no functional changes with this patch, but it will simplify the following patch somewhat.
This patch reduces some duplication, by moving *all* fake worker loader code into the `setupFakeWorkerGlobal` function. Furthermore, the functions are simplified further by using `async`/`await` where appropriate.
This patch addresses a couple of smaller issues with the `PDFHistory` class:
- Most, if not all, other viewer components can be reset in one way or another, and there's no good reason for the `PDFHistory` implementation to be different here.
- Currently it's (technically) possible to keep adding entries to the browser history, via the `PDFHistory` instance, even after the document has been closed. That obviously makes no sense, and is caused by the lack of a `reset` method.
- The internal `this._isPagesLoaded` property was never actually reset, which would lead to it being temporarily wrong when a new document was opened in the default viewer.
The `viewer` option was *only* used for checking that a document is loaded in `PDFPresentationMode.request`, however that's just as easy to do by simply utilizing `BaseViewer.pagesCount` instead and this way we can also avoid the DOM lookup.
The code in question is *only* relevant in non-`PRODUCTION` mode, i.e. the *development* version of the viewer run with `gulp server`, and has been completely unused at least since SystemJS was added.
I really cannot see any reason to keep this, since it's code which first of all isn't shipping and secondly isn't even being used in the development viewer.
The issue has been open for years now, and has even been marked with `5-good-beginner-bug` for *months*, without any movement.
Considering just how simple the suggested solution is, I'm submitting this patch just to close out a long-standing issue.
Besides avoiding errors during loading, this also ensures that the document will be correctly scrolled/zoomed into view once the viewer becomes visible.
This "new" behaviour was always intended, see PR 2613, however various re-factoring over the years seem to have broken this (and I'm probably at least somewhat responsible for that).
This was added in PR 4470, but doesn't appear to have been used since.
While it's certainly easy to understand how this was helpful during development of that PR, actually providing this hash parameter isn't going to work anymore given that the original CMap files were also removed from the repository.
I suppose that the hash parameter *could* be useful if you'd attempt to update the BCMap files, however that hasn't been attempted even once in over *five* years time. Furthermore, at this point using the `AppOptions` directly in that situation should also work fine.
All in all, this seems like a piece of old and unused code which we can simply remove now.
Firefox telemetry supports using string labels now. Convert our integers
that we used for categories to just use strings.
The upstream work will happen in:
https://bugzilla.mozilla.org/show_bug.cgi?id=1566882
Ensure that setting the `zoomDisabledTimeout` isn't skipped, regardless of the supported zoom keys, when handling mouse wheel events (PR 7097 follow-up)
