*This patch basically extends the approach from PR 10392, by also checking the last page.*
Currently, in e.g. the `Catalog.numPages`-getter, we're simply assuming that if the /Pages-tree has an *integer* /Count entry it must also be correct/valid.
As can be seen in the referenced PDF documents, that entry may be completely bogus which causes general parsing to breaking down elsewhere in the worker-thread (and hanging the browser).
Rather than hoping that the /Count entry is correct, similar to all other data found in PDF documents, we obviously need to validate it. This turns out to be a little less straightforward than one would like, since the only way to do this (as far as I know) is to parse the *entire* /Pages-tree and essentially counting the pages.
To avoid doing that for all documents, this patch tries to take a short-cut by checking if the last page (based on the /Count entry) can be successfully fetched. If so, we assume that the /Count entry is correct and use it as-is, otherwise we'll iterate through (potentially) the *entire* /Pages-tree to determine the number of pages.
Unfortunately these changes will have a number of *somewhat* negative side-effects, please see a possibly incomplete list below, however I cannot see a better way to address this bug.
- This will slow down initial loading/rendering of all documents, at least by some amount, since we now need to fetch/parse more of the /Pages-tree in order to be able to access the *last* page of the PDF documents.
- For poorly generated PDF documents, where the entire /Pages-tree only has *one* level, we'll unfortunately need to fetch/parse the *entire* /Pages-tree to get to the last page. While there's a cache to help reduce repeated data lookups, this will affect initial loading/rendering of *some* long PDF documents,
- This will affect the `disableAutoFetch = true` mode negatively, since we now need to fetch/parse more data during document initialization. While the `disableAutoFetch = true` mode should still be helpful in larger/longer PDF documents, for smaller ones the effect/usefulness may unfortunately be lost.
As one *small* additional bonus, we should now also be able to support opening PDF documents where the /Pages-tree /Count entry is completely invalid (e.g. contains a non-integer value).
Fixes two of the issues listed in issue 14303, namely the `poppler-67295-0.pdf` and `poppler-85140-0.pdf` documents.
For this particular PDF document, we have `/W [1 2 166666666666666666666666666]` which obviously makes no sense.
While this patch makes no attempt at actually validating the entries in the /W-array, we'll now simply abort all processing when the end of the PDF document has been reached (thus preventing hanging the browser).
Please note that this patch doesn't enable the PDF document to be loaded/rendered, but at least it fails "correctly" now.
Fixes one of the issues listed in issue 14303, namely the `REDHAT-1531897-0.pdf`document.
This bug was surprisingly difficult to track down, since it didn't just depend on range-requests being used but also on how quickly the document was loaded. To even be able to reproduce this locally, I had to use a very small `rangeChunkSize`-value (note the unit-test).
The cause of this bug is a bogus entry in the XRef-table, causing us to attempt to request data from *beyond* the actual document size and thus getting into an infinite loop.
Fixes *one* of the issues listed in issue 14303, namely the `PDFBOX-4352-0.pdf` document.
In the `BaseViewer` this cache is mostly relevant in the `disableAutoFetch = true` mode, since the pages are being initialized *lazily* in that case.
In the `PDFThumbnailViewer` this cache is mostly used for thumbnails that are actually being rendered, as opposed to those created directly from the "regular" pages.
Please note that I'm not suggesting that we remove these caches because they're only used in some situations, but rather because they're for all intents and purposes actually *redundant*. In the API itself, we're already caching both the page-promises and the actual pages themselves on the `WorkerTransport`-instance.
Hence these viewer-caches aren't really necessary in practice, and adds what to me mostly seems like an unnecessary level of indirection.[1]
Given that the viewer now relies on caching in the API itself, this patch also adds a new unit-test to ensure that page-caching works (and keep working) as expected.
---
[1] In the `WorkerTransport.getPage`-method the parameter is being validated on every call, but that's hardly enough code to warrant keeping the "duplicate" caches in the viewer in my opinion.
*Please note:* These changes will primarily benefit longer documents, somewhat at the expense of e.g. one-page documents.
The existing `PDFDocumentProxy.getStats` function, which in the default viewer is called for each rendered page, requires a round-trip to the worker-thread in order to obtain the current document stats. In the default viewer, we currently make one such API-call for *every rendered* page.
This patch proposes replacing that method with a *synchronous* `PDFDocumentProxy.stats` getter instead, combined with re-factoring the worker-thread code by adding a `DocStats`-class to track Stream/Font-types and *only send* them to the main-thread *the first time* that a type is encountered.
Note that in practice most PDF documents only use a fairly limited number of Stream/Font-types, which means that in longer documents most of the `PDFDocumentProxy.getStats`-calls will return the same data.[1]
This re-factoring will obviously benefit longer document the most[2], and could actually be seen as a regression for one-page documents, since in practice there'll usually be a couple of "DocStats" messages sent during the parsing of the first page. However, if the user zooms/rotates the document (which causes re-rendering), note that even a one-page document would start to benefit from these changes.
Another benefit of having the data available/cached in the API is that unless the document stats change during parsing, repeated `PDFDocumentProxy.stats`-calls will return *the same identical* object.
This is something that we can easily take advantage of in the default viewer, by now *only* reporting "documentStats" telemetry[3] when the data actually have changed rather than once per rendered page (again beneficial in longer documents).
---
[1] Furthermore, the maximium number of `StreamType`/`FontType` are `10` respectively `12`, which means that regardless of the complexity and page count in a PDF document there'll never be more than twenty-two "DocStats" messages sent; see 41ac3f0c07/src/shared/util.js (L206-L232)
[2] One example is the `pdf.pdf` document in the test-suite, where rendering all of its 1310 pages only result in a total of seven "DocStats" messages being sent from the worker-thread.
[3] Reporting telemetry, in Firefox, includes using `JSON.stringify` on the data and then sending an event to the `PdfStreamConverter.jsm`-code.
In that code the event is handled and `JSON.parse` is used to retrieve the data, and in the "documentStats"-case we'll then iterate through the data to avoid double-reporting telemetry; see https://searchfox.org/mozilla-central/rev/8f4c180b87e52f3345ef8a3432d6e54bd1eb18dc/toolkit/components/pdfjs/content/PdfStreamConverter.jsm#515-549
- it aims to fix https://bugzilla.mozilla.org/show_bug.cgi?id=931481;
- real space chars are pushed in the chunk but when there is an extra spacing, the next char position must be compared with the previous one;
- for example, an extra spacing can cancel a space so visually there are no space.
- PR #13257 fixed a lot of issues but not all and this patch aims to fix almost all remaining issues.
- the idea in this new patch is to compare position of new glyph with the last position where a glyph has been drawn;
- no space are "drawn": it just moves the cursor but they aren't added in the chunk;
- so this way a space followed by a cursor move can be treated as only one space: it helps to merge all spaces into one.
- to make difference between real spaces and tracking ones, we used a factor of the space width (from the font)
- it was a pretty good idea in general but it fails with some fonts where space was too big:
- in Poppler, they're using a factor of the font size: this is an excellent idea (<= 0.1 * fontSize implies tracking space).
*Please note:* This is a tentative patch, since I don't have the necessary a11y-software to actually test it.
To avoid having to add a new API-method just for a single string, I figured that adding the new property to the existing `documentInfo`-data (accessed via `PDFDocumentProxy.getMetadata` in the API) will hopefully be deemed acceptable.
*This is a follow-up to PRs 13867 and 13899.*
This patch is tagged `api-minor` for the following reasons:
- It replaces the `renderInteractiveForms`/`includeAnnotationStorage`-options, in the `PDFPageProxy.render`-method, with the single `annotationMode`-option that controls which annotations are being rendered and how. Note that the old options were mutually exclusive, and setting both to `true` would result in undefined behaviour.
- For improved consistency in the API, the `annotationMode`-option will also work together with the `PDFPageProxy.getOperatorList`-method.
- It's now also possible to disable *all* annotation rendering in both the API and the Viewer, since the other changes meant that this could now be supported with a single added line on the worker-thread[1]; fixes 7282.
---
[1] Please note that in order to simplify the overall implementation, we'll purposely only support disabling of *all* annotations and that the option is being shared between the API and the Viewer. For any more "specialized" use-cases, where e.g. only some annotation-types are being rendered and/or the API and Viewer render different sets of annotations, that'll have to be handled in third-party implementations/forks of the PDF.js code-base.
This patch removes the only remaining closure in the `src/display/api.js` file, utilizing a similar approach as used in lots of other parts of the code-base, which results in a small decrease in the size of the *build* `pdf.js` file.
Given that `PDFWorker` is exposed through the *public* API, this complicates things somewhat since there's a couple of worker-related properties that really should stay *private*. Initially, while working on PR 13813, I believed that we'd need support for private (static) class fields in order to get rid of this closure, however I've managed to come up with what's hopefully deemed an acceptable work-around here.
Furthermore, some helper functions were simply moved into the `PDFWorker` class as static methods, thus simplifying the overall implementation (e.g. we don't need to manually cache the Promise in the `PDFWorker._setupFakeWorkerGlobal`-method).
Finally, as part of this re-factoring a number of missing JSDoc-comments were added which *together* with the removal of the closure significantly improves the `gulp jsdoc` output for the `PDFWorker` class.
*Please note:* This patch is tagged with `api-minor` since it deprecates `PDFWorker.getWorkerSrc()` in favor of the shorter `PDFWorker.workerSrc`, with the fallback limited to `GENERIC` builds.
With the changes made in PR 13746 the *internal* renderingIntent handling became somewhat "messy", since we're now having to do string-matching in various spots in order to handle the "oplist"-intent correctly.
Hence this patch, which implements the idea from PR 13746 to convert the `intent`-strings, used in various API-methods, into an *internal* renderingIntent that's implemented using a bit-field instead. *Please note:* This part of the patch, in itself, does *not* change the public API (but see below).
This patch is tagged `api-minor` for the following reasons:
1. It changes the *default* value for the `intent` parameter, in the `PDFPageProxy.getAnnotations` method, to "display" in order to be consistent across the API.
2. In order to get *all* annotations, with the `PDFPageProxy.getAnnotations` method, you now need to explicitly set "any" as the `intent` parameter.
3. The `PDFPageProxy.getOperatorList` method will now also support the new "any" intent, to allow accessing the operatorList of all annotations (limited to those types that have one).
4. Finally, for consistency across the API, the `PDFPageProxy.render` method also support the new "any" intent (although I'm not sure how useful that'll be).
Points 1 and 2 above are the significant, and thus breaking, changes in *default* behaviour here. However, unfortunately I cannot see a good way to improve the overall API while also keeping `PDFPageProxy.getAnnotations` unchanged.
This patch utilizes the same approach as used in lots of other parts of the code-base, which thus *slightly* reduces the size of this code.
By removing some of the (current) indirection, we can also simplify the JSDocs a little bit. Looking at the `gulp jsdoc` output, this actually seem to *improve* the documentation for this class.
With this patch, the `PDFPageProxy.getOperatorList` method will now return `PDFOperatorList`-instances that also include Annotation-operatorLists (when those exist). Hence this closes a small, but potentially confusing, gap between the `render` and `getOperatorList` methods.
Previously we've been somewhat reluctant to do this, as explained below, but given that there's actual use-cases where it's required probably means that we'll *have* to implement it now.
Since we still need the ability to separate "normal" rendering operations from direct `getOperatorList` calls in the worker-thread, this API-change unfortunately causes the *internal* renderingIntent to become a bit "messy" which is indeed unfortunate (note the `"oplist-"` strings in various spots). As-is I suppose that it's not all that bad, but we may want to consider changing the *internal* renderingIntent to e.g. a bitfield in the future.
Besides fixing issue 13704, this patch would also be necessary if someone ever tries to implement e.g. issue 10165 (since currently `PDFPageProxy.getOperatorList` doesn't include Annotation-operatorLists).
*Please note:* This patch is *also* tagged "api-minor" for a second reason, which is that we're now including the Annotation-id in the `beginAnnotation` argument. The reason for this is to allow correlating the Annotation-data returned by `PDFPageProxy.getAnnotations`, with its corresponding operatorList-data (for those Annotations that have it).
The PDF.js API has only ever supported accessing the original file ID, however the second one that (should) exist in *modified* documents have thus far been completely inaccessible through the API.
That seems like a simple oversight, caused e.g. by the viewer not needing it, since it really shouldn't hurt to provide API-users with the ability to check if a PDF document has been modified since its creation.[1]
Please refer to https://www.adobe.com/content/dam/acom/en/devnet/pdf/pdfs/PDF32000_2008.pdf#G13.2261661 for additional information.
For an example of how to update existing code to use the new API, please see the changes in the `web/app.js` file included in this patch.
*Please note:* While I'm not sure if we'll ever be able to remove the old `PDFDocumentProxy.fingerprint` getter, given that it's existed since "forever", that probably isn't a big deal given that it's now limited to only `GENERIC`-builds.
---
[1] Although this obviously depends on the PDF software following the specification, by updating the second file ID as intended.
According to the specification, see https://web.archive.org/web/20210404042322if_/https://www.adobe.com/content/dam/acom/en/devnet/acrobat/pdfs/PDF32000_2008.pdf#G6.2384179, the keys of a NameTree/NumberTree should be ordered.
For corrupt PDF files, which violate this assumption, it's thus possible that trying to lookup a single entry fails.
Previously, in PR 10274, we implemented a fallback that only applies to the "bottom" node of a NameTree/NumberTree, which in general might not actually help for sufficiently corrupt NameTree/NumberTree data.
Instead we remove the current *limited* fallback from `NameOrNumberTree.get`, and defer to the call-site to handle this case explicitly e.g. by using `NameOrNumberTree.getAll` for data where that makes sense. For well-formed documents, these changes should *not* lead to any additional data fetching/parsing.
Finally, as part of these changes, the validation of named destination data is improved in the `Catalog` and a new unit-test is also added.
- Improve chunking in order to fix some bugs where the spaces aren't here:
* track the last position where a glyph has been drawn;
* when a new glyph (first glyph in a chunk) is added then compare its position with the last saved one and add a space or break:
- there are multiple ways to move the glyphs and to avoid to have to deal with all the different possibilities it's a way easier to just compare positions;
- and so there is now one function (i.e. "compareWithLastPosition") where all the job is done.
- Add some breaks in order to get lines;
- Remove the multiple whites spaces:
* some spaces were filled with several whites spaces and so it makes harder to find some sequences of words using the search tool;
* other pdf readers replace spaces by one white space.
Update src/core/evaluator.js
Co-authored-by: Jonas Jenwald <jonas.jenwald@gmail.com>
Co-authored-by: Jonas Jenwald <jonas.jenwald@gmail.com>
With the current implementation of `PDFDocument.hasJSActions`, in the worker-thread, we're not actually handling not-yet-loaded data correctly. This can thus fail in *two* different ways:
- The `PDFDocument.fieldObjects` getter (and its helper method), while it may *return* a Promise, still fetches all of its data synchronously and it can thus throw a `MissingDataException` during parsing.
- The `Catalog.jsActions` getter, which is completely synchronous, can obviously throw a `MissingDataException` during parsing.
If either of these cases occur currently, the `PDFDocumentProxy.hasJSActions` method in the API can either return a *rejected* Promise (which it never should) or possibly "hang" and never resolve.
*Please note:* While I've not *yet* seen this error in an actual PDF document, it can happen during loading if you're unlucky enough with e.g. the structure of the PDF document and/or the download speed offered by the server.
This patch is thus based on code-inspection *and* on manually throwing a `MissingDataException` on the first access of `Catalog.jsActions` to simulate this situation.
Finally, this patch adds a couple of *API* unit-tests for this (since none existed).
This is first of all consistent with existing API-methods, where we return `null` when the data in question doesn't exist. Secondly, it should also be (slightly) more efficient since there's less dummy-data that we need to transfer between threads.
Finally, this prevents us from adding an empty/unnecessary span to *every* single page even in documents without any structure tree data.
The done callbacks are an outdated mechanism to signal Jasmine that a
unit test is done, mostly in cases where a unit test needed to wait for
an asynchronous operation to complete before doing its assertions.
Nowadays a much better mechanism is in place for that, namely simply
passing an asynchronous function to Jasmine, so we don't need callbacks
anymore (which require more code and may be more difficult to reason
about).
In these particular cases though the done callbacks never had any real
use since nothing asynchronous happens in these places. Synchronous
functions don't need to use done callbacks since Jasmine simply knows
it's done when the function reaches its normal end, so we can safely get
rid of these callbacks. The telltale sign is if the done callback is
used unconditionally at the end of the function.
This is all done in an effort to over time get rid of all callbacks in
the unit test code.
- but don't validate them for now;
- Firefox will display a bar to warn that the signature validation is not supported (see https://bugzilla.mozilla.org/show_bug.cgi?id=854315)
- almost all (all ?) pdf readers display signatures;
- validation is done in edge but for now it's behind a pref.
Currently only URL-strings are officially supported by `getDocument`, however at this point in time I cannot really see any compelling reason to not support `URL`-objects as well.
Most likely the reason that we've don't already support `URL`-objects, in `getDocument`, is that historically `URL` wasn't fully implemented across browsers and our old polyfill wasn't perfect; see https://developer.mozilla.org/en-US/docs/Web/API/URL/URL#browser_compatibility
*Please note:* Because of how the `url` parameter is currently handled, there's actually *some* cases where passing a `URL`-object to `getDocument` already works. That, in my opinion, provides additional motivation for supporting `URL`-objects officially, since it makes the API more consistent.
The following is an attempt to summarize the *current* situation, based on the actual code rather than the JSDocs:
- `getDocument("url string")` works and is documented.[1]
- `getDocument({ url: "url string", })` works and is documented.[1]
- `getDocument(new URL(...))` throws immediately, since no supported parameters are found.
- `getDocument({ url: new URL(...), })` actually works even though it's not documented.[1] Originally, when data was fetched on the worker-thread, this would likely have thrown since `URL` isn't clonable.[2]
- `getDocument({ url: { abc: 123, }, })`, or some similarily meaningless input, will be "accepted" by `getDocument` and then throw a `MissingPDFException` when attempting to fetch the bogus data.
With the changes in this patch, not only is `URL`-objects now officially supported and documented when calling `getDocument`, but we'll also do a much better job at actually validating any URL-data passed to `getDocument` (and instead fail early).
---
[1] In *browsers*, we create a valid URL thus indirectly validating the input. In Node.js environments, on the other hand, no validation is done since obtaining a baseUrl is more difficult (and PDF.js is primarily written for browsers anyway).
[2] https://developer.mozilla.org/en-US/docs/Web/API/Web_Workers_API/Structured_clone_algorithm#supported_types
Given that the API will now, after PR 12039, automatically pick the correct factories to use depending on the environment (browser vs. Node.js), we can utilize that in the unit-tests as well. This way we don't have to manually repeat the same initialization code in *multiple* unit-tests.
*Note:* The *official* PDF.js API is defined in `src/pdf.js`, hence the new exports in `src/display/api.js` will not affect that.
Also, updates the unit-test `FileReaderFactory` helpers similarily.
*Drive-by change:* Fix the `CMapReaderFactory` usage in the annotation unit-tests, since the cache should only contain raw data and not a Promise. While this obviously works as-is, having unit-tests that "abuse" the intended data format can easily lead to unnecessary failures if changes are made to the relevant `src/core/` code.
* the goal is to execute actions like Open or OpenAction
* can be tested with issue6106.pdf (auto-print)
* once #12701 is merged, we can add page actions
Given that we already include the "Content-Disposition"-header filename, when it exists, it shouldn't hurt to also include the information from the "Content-Length"-header.
For PDF documents opened via a URL, which should be a very common way for the PDF.js library to be used, this will[1] thus provide a way of getting the PDF filesize without having to wait for the `getDownloadInfo`-promise to resolve[2].
With these API improvements, we can also simplify the filesize handling in the `PDFDocumentProperties` class.
---
[1] Assuming that the server is correctly configured, of course.
[2] Since that's not *guaranteed* to happen in general, with e.g. `disableAutoFetch = true` set.
This patch should *hopefully* remove the intermittent unit-test failure, by using the *same* `optionalContentConfigPromise` for both `renderTask`s and thus get more predictable timing behaviour.
Add a new method to the API to get the optional content configuration. Add
a new render task param that accepts the above configuration.
For now, the optional content is not controllable by the user in
the viewer, but renders with the default configuration in the PDF.
All of the test files added exhibit different uses of optional content.
Fixes#269.
Fix test to work with optional content.
- Change the stopAtErrors test to ensure the operator list has something,
instead of asserting the exact number of operators.
This patch should *hopefully* remove the `Unhandled promise rejection: ...` errors, by returning the "final" promise. Also, by pausing/delaying of rendering slightly the likelihood of the test failing in the first place should thus be reduced.
This moves, and slightly simplifies, code that's currently residing in the unit-test utils into the actual library, such that it's bundled with `GENERIC`-builds and used in e.g. the API-code.
As an added bonus, this also brings out-of-the-box support for CMaps in e.g. the Node.js examples.
