The last unit-test didn't work correctly, since an error was thrown in `PDFDocument._hasOnlyDocumentSignatures` because the mocked `XRef`-instance wasn't actually being set correctly.
Also, updates the `XRefMock` to use `async` methods where appropriate.
* Move display/xml_parser.js in shared to use it in worker
* Save form data in XFA datasets when pdf is a mix of acroforms and xfa
Co-authored-by: Brendan Dahl <brendan.dahl@gmail.com>
This allows for merging of dictionaries one level deeper than previously. This could be useful e.g. for /Resources dictionaries, where you want to e.g. merge their respective /Font dictionaries (and other) together rather than picking just the first one.
Good form type detection is important to get reliable telemetry and to
only show the fallback bar if a form cannot be filled out by the user.
PDF.js only supports AcroForm data, so XFA data is explicitly unsupported
(tracked in issue #2373). However, the previous form type detection
couldn't separate AcroForm and XFA well enough, causing form type
telemetry to be incorrect sometimes and the fallback bar to be shown for
forms that could in fact be filled out by the user.
The solution in this commit is found by studying the specification and
the form documents that are available to us. In a nutshell the rules are:
- There is XFA data if the `XFA` entry is a non-empty array or stream.
- There is AcroForm data if the `Fields` entry is a non-empty array and
it doesn't consist of only document signatures.
The document signatures part was not handled in the old code, causing a
document with only XFA data to also be marked as having AcroForm data.
Moreover, the old code didn't check all the data types.
Now that AcroForm and XFA can be distinguished, the viewer is configured
to only show the fallback bar for documents that only have XFA data. If
a document also has AcroForm data, the viewer can use that to render the
form. We have not found documents where the XFA data was necessary in
that case.
Finally, we include unit tests to ensure that all cases are covered and
move the form type detection out of the `parse` function so that it's
only executed if the document information is actually requested
(potentially making initial parsing a tiny bit faster).
The `AcroForm` entry is part of the catalog, not of the document, so its
logic should be placed there instead. The document should look in the
catalog to fetch it, and not have knowledge of `catDict`, which is a
member internal to the catalog.
Moreover, make the AcroForm member private on the document instance. It's
only used internally and was also never intended to be public. For users
it's exposed by the `getMetadata` API endpoint as `IsAcroFormPresent`.
Only a boolean is exposed, so we now also only store the boolean on the
document instance.
Finally, the annotation code needs access to the full AcroForm
dictionary, so it's updated to fetch the data from the catalog instead
of the document that now only holds the boolean.
The down appearance (`D`) is optional and not available in the document
from #12233, so the checkboxes are never saved/printed as checked
because the checked appearance is based on the export value that is
missing because the `D` entry is not available.
Instead, we should use the normal appearance (`N`) since that one is
required and therefore always available.
Finally, the /Off appearance is optional according to section 12.7.4.2.3
of the specification, so that needs to be taken into account to match
the specification and to fix reference test failures for the
`annotation-button-widget-print` test. That is a file that doesn't
specify an /Off appearance in the normal appearance dictionary.
The helper method `_decodeFormValue` is used to ensure that it happens
in one place. Note that form values are field values, display values
and export values.
The specification states that the field value is `null` if no item is
selected and we didn't handle this case properly. Even though this did
not break the rendering because we always convert the value to an array
and the `includes` check in the display layer would simply not match,
the field value would be `[null]` which is not expected and strange from
an API perspective.
This commit fixes that by ensuring that we return an empty array in
case the field value is `null`. The API therefore still always gives an
array for the field value, but now the code is more specific so that the
value is either an empty array or an array of strings.
This commit follows the same pattern as another unit test in this file
and both reduces existing and future code duplication (since the next
commit will extend this test with an additional input).
This patch should *hopefully* remove the intermittent unit-test failure, by using the *same* `optionalContentConfigPromise` for both `renderTask`s and thus get more predictable timing behaviour.
Add a new method to the API to get the optional content configuration. Add
a new render task param that accepts the above configuration.
For now, the optional content is not controllable by the user in
the viewer, but renders with the default configuration in the PDF.
All of the test files added exhibit different uses of optional content.
Fixes#269.
Fix test to work with optional content.
- Change the stopAtErrors test to ensure the operator list has something,
instead of asserting the exact number of operators.
This might make debugging intermittent failures a bit easier in the
future because it allows us to spot unexpected differences in the number
of tests being run and allows us to run the tests locally in the same
order in case of intermittent failures.
This patch should *hopefully* remove the `Unhandled promise rejection: ...` errors, by returning the "final" promise. Also, by pausing/delaying of rendering slightly the likelihood of the test failing in the first place should thus be reduced.
When the old `Dict.getAll()` method was removed, it was replaced with a `Dict.getKeys()` call and `Dict.get(...)` calls (in a loop).
While this pattern obviously makes a lot of sense in many cases, there's some instances where we actually want the *raw* `Dict` values (i.e. `Ref`s where applicable). In those cases, `Dict.getRaw(...)` calls are instead used within the loop. However, by introducing a new `Dict.getRawValues()` method we can reduce the number of (strictly unnecessary) function calls by simply getting the *raw* `Dict` values directly.
This patch will help pathological cases the most, with issue 2813 being a particularily problematic example. While there's only *four* `/ExtGState` resources, there's a total `29062` of `setGState` operators. Even though parsing of a single `/ExtGState` resource is quite fast, having to re-parse them thousands of times does add up quite significantly.
For simplicity we'll only cache "simple" `/ExtGState` resource, since e.g. the general `SMask` case cannot be easily cached (without re-factoring other code, which may have undesirable effects on general parsing).
By caching "simple" `/ExtGState` resource, we thus improve performance by:
- Not having to fetch/validate/parse the same `/ExtGState` data over and over.
- Handling of repeated `setGState` operators becomes *synchronous* during the `OperatorList` building, instead of having to defer to the event-loop/microtask-queue since the `/ExtGState` parsing is done asynchronously.
---
Obviously I had intended to include (standard) benchmark results with this patch, but for reasons I don't understand the test run-time (even with `master`) of the document in issue 2813 is *a lot* slower than in the development viewer (making normal benchmarking infeasible).
However, testing this manually in the development viewer (using `pdfBug=Stats`) shows a *reduction* of `~10 %` in the rendering time of the PDF document in issue 2813.
Originally there weren't any (generally) good ways to handle errors gracefully, on the worker-side, however that's no longer the case and we can simply fallback to the existing `ignoreErrors` functionality instead.
Also, please note that the "no `/XObject` found"-scenario should be *extremely* unlikely in practice and would only occur in corrupt/broken documents.
Note that the `PartialEvaluator.getOperatorList` case is especially bad currently, since we'll simply (attempt to) send the data as-is to the main-thread. This is quite bad, since in a corrupt/broken document the data *could* contain anything and e.g. be unclonable (which would cause breaking errors).
Also, we're (obviously) not attempting to do anything with this "raw" `OPS.paintXObject` data on the main-thread and simply ensuring that we never send it definately seems like the correct approach.
This special-case was added in PR 1992, however it became unnecessary with the changes in PR 4824 since all of the ColorSpace parsing is now done on the worker-thread (with only RGB-data being sent to the main-thread).
Note how the `getFontID`-method in `src/core/fonts.js` is *completely* global, rather than properly tied to the current document. This means that if you repeatedly open and parse/render, and then close, even the *same* PDF document the `fontID`s will still be incremented continuously.
For comparison the `createObjId` method, on `idFactory`, will always create a *consistent* id, assuming of course that the document and its pages are parsed/rendered in the same order.
In order to address this inconsistency, it thus seems reasonable to add a new `createFontId` method on the `idFactory` and use that when obtaining `fontID`s. (When the current `getFontID` method was added the `idFactory` didn't actually exist yet, which explains why the code looks the way it does.)
*Please note:* Since the document id is (still) part of the `loadedName`, it's thus not possible for different documents to have identical font names.
This moves, and slightly simplifies, code that's currently residing in the unit-test utils into the actual library, such that it's bundled with `GENERIC`-builds and used in e.g. the API-code.
As an added bonus, this also brings out-of-the-box support for CMaps in e.g. the Node.js examples.
This patch contains the following *notable* improvements:
- Changes the `ColorSpace.parse` call-sites to, where possible, pass in a reference rather than actual ColorSpace data (necessary for the next point).
- Adds (local) caching of `ColorSpace`s by `Ref`, when applicable, in addition the caching by name. This (generally) improves `ColorSpace` caching for e.g. the SMask code-paths.
- Extends the (local) `ColorSpace` caching to also apply when handling Images and Patterns, thus further reducing unneeded re-parsing.
- Adds a new `ColorSpace.parseAsync` method, almost identical to the existing `ColorSpace.parse` one, but returning a Promise instead (this simplifies some code in the `PartialEvaluator`).
Since this helper function is no longer used anywhere in the main code-base, but only in a couple of unit-tests, it's thus being moved to a more appropriate spot.
Finally, the implementation of `isEmptyObj` is also tweaked slightly by removing the manual loop.
Currently some JPEG images are decoded by the built-in PDF.js decoder in `src/core/jpg.js`, while others attempt to use the browser JPEG decoder. This inconsistency seem unfortunate for a number of reasons:
- It adds, compared to the other image formats supported in the PDF specification, a fair amount of code/complexity to the image handling in the PDF.js library.
- The PDF specification support JPEG images with features, e.g. certain ColorSpaces, that browsers are unable to decode natively. Hence, determining if a JPEG image is possible to decode natively in the browser require a non-trivial amount of parsing. In particular, we're parsing (part of) the raw JPEG data to extract certain marker data and we also need to parse the ColorSpace for the JPEG image.
- While some JPEG images may, for all intents and purposes, appear to be natively supported there's still cases where the browser may fail to decode some JPEG images. In order to support those cases, we've had to implement a fallback to the PDF.js JPEG decoder if there's any issues during the native decoding. This also means that it's no longer possible to simply send the JPEG image to the main-thread and continue parsing, but you now need to actually wait for the main-thread to indicate success/failure first.
In practice this means that there's a code-path where the worker-thread is forced to wait for the main-thread, while the reverse should *always* be the case.
- The native decoding, for anything except the *simplest* of JPEG images, result in increased peak memory usage because there's a handful of short-lived copies of the JPEG data (see PR 11707).
Furthermore this also leads to data being *parsed* on the main-thread, rather than the worker-thread, which you usually want to avoid for e.g. performance and UI-reponsiveness reasons.
- Not all environments, e.g. Node.js, fully support native JPEG decoding. This has, historically, lead to some issues and support requests.
- Different browsers may use different JPEG decoders, possibly leading to images being rendered slightly differently depending on the platform/browser where the PDF.js library is used.
Originally the implementation in `src/core/jpg.js` were unable to handle all of the JPEG images in the test-suite, but over the last couple of years I've fixed (hopefully) all of those issues.
At this point in time, there's two kinds of failure with this patch:
- Changes which are basically imperceivable to the naked eye, where some pixels in the images are essentially off-by-one (in all components), which could probably be attributed to things such as different rounding behaviour in the browser/PDF.js JPEG decoder.
This type of "failure" accounts for the *vast* majority of the total number of changes in the reference tests.
- Changes where the JPEG images now looks *ever so slightly* blurrier than with the native browser decoder. For quite some time I've just assumed that this pointed to a general deficiency in the `src/core/jpg.js` implementation, however I've discovered when comparing two viewers side-by-side that the differences vanish at higher zoom levels (usually around 200% is enough).
Basically if you disable [this downscaling in canvas.js](8fb82e939c/src/display/canvas.js (L2356-L2395)), which is what happens when zooming in, the differences simply vanish!
Hence I'm pretty satisfied that there's no significant problems with the `src/core/jpg.js` implementation, and the problems are rather tied to the general quality of the downscaling algorithm used. It could even be seen as a positive that *all* images now share the same downscaling behaviour, since this actually fixes one old bug; see issue 7041.
Currently image resources, as opposed to e.g. font resources, are handled exclusively on a page-specific basis. Generally speaking this makes sense, since pages are separate from each other, however there's PDF documents where many (or even all) pages actually references exactly the same image resources (through the XRef table). Hence, in some cases, we're decoding the *same* images over and over for every page which is obviously slow and wasting both CPU and memory resources better used elsewhere.[1]
Obviously we cannot simply treat all image resources as-if they're used throughout the entire PDF document, since that would end up increasing memory usage too much.[2]
However, by introducing a `GlobalImageCache` in the worker we can track image resources that appear on more than one page. Hence we can switch image resources from being page-specific to being document-specific, once the image resource has been seen on more than a certain number of pages.
In many cases, such as e.g. the referenced issue, this patch will thus lead to reduced memory usage for image resources. Scrolling through all pages of the document, there's now only a few main-thread copies of the same image data, as opposed to one for each rendered page (i.e. there could theoretically be *twenty* copies of the image data).
While this obviously benefit both CPU and memory usage in this case, for *very* large image data this patch *may* possibly increase persistent main-thread memory usage a tiny bit. Thus to avoid negatively affecting memory usage too much in general, particularly on the main-thread, the `GlobalImageCache` will *only* cache a certain number of image resources at the document level and simply fallback to the default behaviour.
Unfortunately the asynchronous nature of the code, with ranged/streamed loading of data, actually makes all of this much more complicated than if all data could be assumed to be immediately available.[3]
*Please note:* The patch will lead to *small* movement in some existing test-cases, since we're now using the built-in PDF.js JPEG decoder more. This was done in order to simplify the overall implementation, especially on the main-thread, by limiting it to only the `OPS.paintImageXObject` operator.
---
[1] There's e.g. PDF documents that use the same image as background on all pages.
[2] Given that data stored in the `commonObjs`, on the main-thread, are only cleared manually through `PDFDocumentProxy.cleanup`. This as opposed to data stored in the `objs` of each page, which is automatically removed when the page is cleaned-up e.g. by being evicted from the cache in the default viewer.
[3] If the latter case were true, we could simply check for repeat images *before* parsing started and thus avoid handling *any* duplicate image resources.
Having `assert` calls without a message string isn't very helpful when debugging, and it turns out that it's easy enough to make use of ESLint to enforce better `assert` call-sites.
In a couple of cases the `assert` calls were changed to "regular" throwing of errors instead, since that seemed more appropriate.
Please find additional details about the ESLint rule at https://eslint.org/docs/rules/no-restricted-syntax
The other testing code already uses the name of the browser as the
unique identifier, so I don't see a good reason to not use that for
identifying browsers to quit as well. Doing so simplifies the (already
somewhat complex) testing logic and ensures that we can use existing
functionality (such as the `getSession` function) to retrieve sessions.
As evident from the code, `PageViewport` only supports[1] `rotation` values which are a multiple of 90 degrees. Besides it being somewhat difficult to imagine meaningful use-cases for a non-multiple of 90 degrees `rotation`, the code also becomes both simpler and more efficient by not having to consider arbitrary `rotation` values.
However, any invalid rotation will *silently* fallback to assume zero `rotation` which probably isn't great for e.g. `PDFPageProxy.getViewport` in the API. Hence this patch, which will now enforce that only valid `rotation` values are accepted.
---
[1] As far as I can tell, from looking through the history, nothing else has ever been supported either.
*Please note:* These changes were done automatically, using the `gulp lint --fix` command.
This rule is already enabled in mozilla-central, see https://searchfox.org/mozilla-central/rev/567b68b8ff4b6d607ba34a6f1926873d21a7b4d7/tools/lint/eslint/eslint-plugin-mozilla/lib/configs/recommended.js#103-104
The main advantage, besides improved consistency, of this rule is that it reduces the size of the code (by 3 bytes for each case). In the PDF.js code-base there's close to 8000 instances being fixed by the `dot-notation` ESLint rule, which end up reducing the size of even the *built* files significantly; the total size of the `gulp mozcentral` build target changes from `3 247 456` to `3 224 278` bytes, which is a *reduction* of `23 178` bytes (or ~0.7%) for a completely mechanical change.
A large number of these changes affect the (large) lookup tables used on the worker-thread, but given that they are still initialized lazily I don't *think* that the new formatting this patch introduces should undo any of the improvements from PR 6915.
Please find additional details about the ESLint rule at https://eslint.org/docs/rules/dot-notation
This patch fixes yet another instalment in the never-ending series of "what the *bleep* was I thinking", by changing the `PDFDocumentProxy.getViewerPreferences` method to return `null` by default.
Not only is this method now consistent with many other API methods, for the data not present case, but it also avoids having to e.g. loop through an object to check if it's actually empty (note the old unit-test).
Please note that these changes were done automatically, using `gulp lint --fix`.
Given that the major version number was increased, there's a fair number of (primarily whitespace) changes; please see https://prettier.io/blog/2020/03/21/2.0.0.html
In order to reduce the size of these changes somewhat, this patch maintains the old "arrowParens" style for now (once mozilla-central updates Prettier we can simply choose the same formatting, assuming it will differ here).
With two kind of builds now being produced, with/without translation/polyfills, it's unfortunately somewhat easy for users to accidentally pick the wrong one.
In the case where a user would attempt to use a modern build of PDF.js in an older browser, such as e.g. IE11, the failure would be immediate when the code is loaded (given the use of unsupported ECMAScript features).
However in some browsers/environments, in particular Node.js, a modern PDF.js build may load correctly and thus *appear* to function, only to fail for e.g. certain API calls. To hopefully lessen the support burden, and to try and improve things overall, this patch adds checks to ensure that a modern build of PDF.js cannot be used in browsers/environments which lack native support for critical functionality (such as e.g. `ReadableStream`). Hence we'll fail early, with an error message telling users to pick an ES5-compatible build instead.
To ensure that we actually test things better especially w.r.t. usage of the PDF.js library in Node.js environments, the `gulp npm-test` task as used by Node.js/Travis was changed (back) to test an ES5-compatible build.
(Since the bots still test the code as-is, without transpilation/polyfills, this shouldn't really be a problem as far as I can tell.)
As part of these changes there's now both `gulp lib` and `gulp lib-es5` build targets, similar to e.g. the generic builds, which thanks to some re-factoring only required adding a small amount of code.
*Please note:* While it's probably too early to tell if this will be a widespread issue, it's possible that this is the sort of patch that *may* warrant being `git cherry-pick`ed onto the current beta version (v2.4.456).
This functionality was only added to the default viewer for backwards compatibility and to support the various PDF viewer tests in mozilla-central, with the intention to eventually remove it completely.
While the different mozilla-central tests cannot be *easily* converted from DOM events, it's however possible to limit that functionality to only MOZCENTRAL builds *and* when tests are running.
Rather than depending of the re-dispatching of internal events to the DOM, the default viewer can instead be used in e.g. the following way:
```javascript
document.addEventListener("webviewerloaded", function() {
PDFViewerApplication.initializedPromise.then(function() {
// The viewer has now been initialized, and its properties can be accessed.
PDFViewerApplication.eventBus.on("pagerendered", function(event) {
console.log("Has rendered page number: " + event.pageNumber);
});
});
});
```
Fixes#11718 in which the `ff` ligature glyph is at index zero in a CFF font. Beacuse this is a CIDFont, glyph names are CIDs, which are integers. Thus the string `".notdef"` is not correct. The rest of the charset data is already parsed correctly as integers when the boolean argument `cid` is true.
*This is part of a series of patches that will try to split PR 11566 into smaller chunks, to make reviewing more feasible.*
Once all the code has been fixed, we'll be able to eventually enable the ESLint no-shadow rule; see https://eslint.org/docs/rules/no-shadow
This property has never been documented and/or *intentionally* exposed through the API, instead the `PDFPageProxy.pageNumber` property is the documented/intended API to use here.
Hence pageIndex is changed to a "private" property on `PDFPageProxy` instances, and internal API functionality is also updated to *consistently* use `this._pageIndex` rather than a mix of formats.
Trying to enable the ESLint rule `no-shadow`, against the `master` branch, would result in a fair number of errors in the `Glyph` class in `src/core/fonts.js`.
Since the glyphs are exposed through the API, we can't very well change the `isSpace` property on `Glyph` instances. Thus the best approach seems, at least to me, to simply rename the `isSpace` helper function to `isWhiteSpace` which shouldn't cause any issues given that it's only used in the `src/core/` folder.
Note that `Dict.set` will only be called with values returned through `Parser.getObj`, and thus indirectly via `Lexer.getObj`. Since neither of those methods will ever return `undefined`, we can simply assert that that's the case when inserting data into the `Dict` and thus get rid of `in` checks when doing the data lookups.
In this case, since `Dict.set` is fairly hot, the patch utilizes an *inline check* and when necessary a direct call to `unreachable` to not affect performance of `gulp server/test` too much (rather than always just calling `assert`).
For very large and complex PDF files this will help performance *slightly*, since `Dict.{get, getAsync, has}` is called *a lot* during parsing in the worker.
This patch was tested using the PDF file from issue 2618, i.e. http://bugzilla-attachments.gnome.org/attachment.cgi?id=226471, with the following manifest file:
```
[
{ "id": "issue2618",
"file": "../web/pdfs/issue2618.pdf",
"md5": "",
"rounds": 250,
"type": "eq"
}
]
```
which gave the following results when comparing this patch against the `master` branch:
```
-- Grouped By browser, stat --
browser | stat | Count | Baseline(ms) | Current(ms) | +/- | % | Result(P<.05)
------- | ------------ | ----- | ------------ | ----------- | --- | ----- | -------------
Firefox | Overall | 250 | 2838 | 2820 | -18 | -0.65 | faster
Firefox | Page Request | 250 | 1 | 2 | 0 | 11.92 | slower
Firefox | Rendering | 250 | 2837 | 2818 | -19 | -0.65 | faster
```
This patch deprecates the existing `getOpenActionDestination` API method, in favor of a better and more general `getOpenAction` method instead. (For now JavaScript actions, related to printing, are still handled as before.)
By clearly separating "regular" Print actions from the JavaScript handling, it's thus possible to get rid of the somewhat annoying and strictly incorrect warning when the viewer loads.
Given that all of these primitives implement caching, to avoid unnecessarily duplicating those objects *a lot* during parsing, it would thus be good to actually enforce usage of `Cmd.get()`/`Name.get()`/`Ref.get()` in the code-base.
Luckily it turns out that there's an ESLint rule, which is fairly easy to use, that can be used to disallow arbitrary JavaScript syntax.
Please find additional details about the ESLint rule at https://eslint.org/docs/rules/no-restricted-syntax
This patch makes the following changes, to improve these API methods:
- Let `PDFPageProxy.cleanup` return a boolean indicating if clean-up actually happened, since ongoing rendering will block clean-up.
Besides being used in other parts of this patch, it seems that an API user may also be interested in the return value given that clean-up isn't *guaranteed* to happen.
- Let `PDFDocumentProxy.cleanup` return the promise indicating when clean-up is finished.
- Improve the JSDoc comment for `PDFDocumentProxy.cleanup` to mention that clean-up is triggered on *both* threads (without going into unnecessary specifics regarding what *exactly* said data actually is).
Add a note in the JSDoc comment about not calling this method when rendering is ongoing.
- Change `WorkerTransport.startCleanup` to throw an `Error` if it's called when rendering is ongoing, to prevent rendering from breaking.
Please note that this won't stop *worker-thread* clean-up from happening (since there's no general "something is rendering"-flag), however I'm not sure if that's really a problem; but please don't quote me on that :-)
All of the caches that's being cleared in `Catalog.cleanup`, on the worker-thread, *should* be re-filled automatically even if cleared *during* parsing/rendering, and the only thing that probably happens is that e.g. font data would have to be re-parsed.
On the main-thread, on the other hand, clearing the caches is more-or-less guaranteed to cause rendering errors, since the rendering code in `src/display/canvas.js` isn't able to re-request any image/font data that's suddenly being pulled out from under it.
- Last, but not least, add a couple of basic unit-tests for the clean-up functionality.
While it would be nice to change the `PDFFormatVersion` property, as returned through `PDFDocumentProxy.getMetadata`, to a number (rather than a string) that would unfortunately be a breaking API change.
However, it does seem like a good idea to at least *validate* the PDF header version on the worker-thread, rather than potentially returning an arbitrary string.
Please find additional details about the ESLint rule at https://eslint.org/docs/rules/prefer-const
With the recent introduction of Prettier this sort of mass enabling of ESLint rules becomes a lot easier, since the code will be automatically reformatted as necessary to account for e.g. changed line lengths.
Note that this patch is generated automatically, by using the ESLint `--fix` argument, and will thus require some additional clean-up (which is done separately).
In order to eventually get rid of SystemJS and start using native `import`s instead, we'll need to provide "complete" file identifiers since otherwise there'll be MIME type errors when attempting to use `import`.
Rather than having a copy of this regular expression in the `test/unit/api_spec.js` file, with a comment about keeping it up-to-date with the code in the viewer (note the incorrect file reference as well), we can just import it instead to simplify all of this.
The original issue did not contain a (reduced) test case that we could
include and linked test cases are not ideal for unit tests, so the
original PR could only be verified manually.
I found this a bit unfortunate considering that the print data is
exposed through the API, so I thought about how we could have an
automated test and managed to create a reduced test case with the
OpenAction dictionary from the file in the original issue.
Therefore, this commit includes a unit test for parsing OpenAction
dictionaries without `Type` entries. I verified that this PDF file
behaves the same as the original one, i.e., no print dialog is shown for
older viewers and the print dialog is shown for the most recent viewer.
This patch makes the follow changes:
- Remove no longer necessary inline `// eslint-disable-...` comments.
- Fix `// eslint-disable-...` comments that Prettier moved down, thus causing new linting errors.
- Concatenate strings which now fit on just one line.
- Fix comments that are now too long.
- Finally, and most importantly, adjust comments that Prettier moved down, since the new positions often is confusing or outright wrong.
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
There's a fair number of (primarily) `Array`s/`TypedArray`s whose formatting we don't want disturb, since in many cases that would lead to the code becoming much more difficult to read and/or break existing inline comments.
*Please note:* It may be a good idea to look through these cases individually, and possibly re-write some of the them (especially the `String` ones) to reduce the need for all of these ignore commands.
I recently noticed a couple of intermittent failures on Travis, hence this patch which changes the expectation to be identical to the 'Page Request' check in the preceding test-case.
Note that most (reasonably) modern browsers have supported this for a while now, see https://developer.mozilla.org/en-US/docs/Web/API/ReadableStream#Browser_compatibility
By moving the polyfill into `src/shared/compatibility.js` we can thus get rid of the need to manually export/import `ReadableStream` and simply use it directly instead.
The only change here which *could* possibly lead to a difference in behavior is in the `isFetchSupported` function. Previously we attempted to check for the existence of a global `ReadableStream` implementation, which could now pass (assuming obviously that the preceding checks also succeeded).
However I'm not sure if that's a problem, since the previous check only confirmed the existence of a native `ReadableStream` implementation and not that it actually worked correctly. Finally it *could* just as well have been a globally registered polyfill from an application embedding the PDF.js library.
Given that the error in question is surfaced on the API-side, this patch makes the following changes:
- Updates the wording such that it'll hopefully be slightly easier for users to understand.
- Changes the plain `Error` to an `InvalidPDFException` instead, since that should work better with the existing Error handling.
- Adds a unit-test which loads an empty PDF document (and also improves a pre-existing `InvalidPDFException` message and its test-case).
The bug report seem to suggest that we don't support UTF-16 strings with a BOM (byte order mark), which we *actually* do as evident by both the code and a unit-test.
The issue at play here is rather that we previously only supported big-endian UTF-16 BOM, and the `Title` string in the PDF document is using a *little-endian* UTF-16 BOM instead.
Fixes https://bugzilla.mozilla.org/show_bug.cgi?id=1593902
As can be seen in `PageViewport` only multiples of 90 degrees are really supported by the code, hence the unit-test doesn't really make sense.
(Possibly this should be enforced in the API, to avoid surprises, but given that this problem has always existed I'm passing on that for now.)
Having these methods fallback to returning `null` in only *one* particular case seems outright wrong, since a "falsy" value will thus be handled incorrectly.
The only reason that this hasn't caused issues in practice is that there's only one call-site passing in three keys, and in that case we're trying to read a font file where falling back to `null` isn't a problem.
Hopefully this patch makes sense, and in order to reduce the regression risk the implementation ensures that only completely missing widths are being replaced.
Having recently worked with this code, it struck me that most of the `postMessage` calls where `Error`s are involved have never been correctly implemented (i.e. missing `wrapReason` calls).
These functions aren't returning anything, now that they're using `ReadableStream`s, and it thus doesn't seem necessary to re-throw errors (also given the console message that's caused by it).
*Please note:* The majority of this patch was written by Yury, and it's simply been rebased and slightly extended to prevent issues when dealing with `RenderingCancelledException`.
By leveraging streams this (finally) provides a simple way in which parsing can be aborted on the worker-thread, which will ultimately help save resources.
With this patch worker-thread parsing will *only* be aborted when the document is destroyed, and not when rendering is cancelled. There's a couple of reasons for this:
- The API currently expects the *entire* OperatorList to be extracted, or an Error to occur, once it's been started. Hence additional re-factoring/re-writing of the API code will be necessary to properly support cancelling and re-starting of OperatorList parsing in cases where the `lastChunk` hasn't yet been seen.
- Even with the above addressed, immediately cancelling when encountering a `RenderingCancelledException` will lead to worse performance in e.g. the default viewer. When zooming and/or rotation of the document occurs it's very likely that `cancel` will be (almost) immediately followed by a new `render` call. In that case you'd obviously *not* want to abort parsing on the worker-thread, since then you'd risk throwing away a partially parsed Page and thus be forced to re-parse it again which will regress perceived performance.
- This patch is already *somewhat* risky, given that it touches fundamentally important/critical code, and trying to keep it somewhat small should hopefully reduce the risk of regressions (and simplify reviewing as well).
Time permitting, once this has landed and been in Nightly for awhile, I'll try to work on the remaining points outlined above.
Co-Authored-By: Yury Delendik <ydelendik@mozilla.com>
Co-Authored-By: Jonas Jenwald <jonas.jenwald@gmail.com>
This is based on a real-world PDF file I encountered very recently[1], although I'm currently unable to recall where I saw it.
Note that different PDF viewers handle these sort of errors differently, with Adobe Reader outright failing to render the attached PDF file whereas PDFium mostly handles it "correctly".
The patch makes the following notable changes:
- Refactor the `cropBox` and `mediaBox` getters, on the `Page`, to reduce unnecessary duplication. (This will also help in the future, if support for extracting additional page bounding boxes are added to the API.)
- Ensure that the page bounding boxes, i.e. `cropBox` and `mediaBox`, are never empty to prevent issues/weirdness in the viewer.
- Ensure that the `view` getter on the `Page` will never return an empty intersection of the `cropBox` and `mediaBox`.
- Add an *optional* parameter to `Util.intersect`, to allow checking that the computed intersection isn't actually empty.
- Change `Util.intersect` to have consistent return types, since Arrays are of type `Object` and falling back to returning a `Boolean` thus seem strange.
---
[1] In that case I believe that only the `cropBox` was empty, but it seemed like a good idea to attempt to fix a bunch of related cases all at once.
With the changes to the `StreamType`/`FontType` "enums" in PR 11029, one unfortunate result is that `getStats` now *always* returns empty Arrays. Something that everyone, myself included, apparently missed is that you obviously cannot index an Array with Strings :-)
I wrongly assumed that the unit-tests would catch any bugs, but they apparently suffered from the same issue as the code in `src/core/`.
Another possible option could perhaps be to use `Set`s, rather than objects, but that will require larger changes since `LoopbackPort` (in `src/display/api.js`) doesn't support them.
There's a number of spots in the current code, and tests, where `cancel` methods are not called with appropriate arguments (leading to Promises not being rejected with Errors as intended).
In some cases the cancel `reason` is implicitly set to `undefined`, and in others the cancel `reason` is just a plain String. To address this inconsistency, the patch changes things such that cancelling is done with `AbortException`s everywhere instead.
For very large and complex PDF files this will help performance slightly, since `Parser.shift` is called *a lot* during parsing.
This patch was tested using the PDF file from issue 2618, i.e. http://bugzilla-attachments.gnome.org/attachment.cgi?id=226471 (with well over *four million* `Parser.shift` calls for just the one page), using the following manifest file:
```
[
{ "id": "issue2618",
"file": "../web/pdfs/issue2618.pdf",
"md5": "",
"rounds": 100,
"type": "eq"
}
]
```
This gave the following results when comparing this patch against the `master` branch:
```
-- Grouped By browser, stat --
browser | stat | Count | Baseline(ms) | Current(ms) | +/- | % | Result(P<.05)
------- | ------------ | ----- | ------------ | ----------- | --- | ----- | -------------
Firefox | Overall | 100 | 3386 | 3322 | -65 | -1.92 | faster
Firefox | Page Request | 100 | 1 | 1 | 0 | -8.08 |
Firefox | Rendering | 100 | 3385 | 3321 | -65 | -1.92 | faster
```
A lot of the `new Parser()` call-sites look quite unwieldy/ugly as-is, with a bunch of somewhat randomly ordered arguments, which we can avoid by changing the constructor to accept an object instead. As an added bonus, this provides better documentation without having to add inline argument comments in the code.
This is similar to the existing caching used to reduced the number of `Cmd` and `Name` objects.
With the `tracemonkey.pdf` file, this patch changes the number of `Ref` objects as follows (in the default viewer):
| | Loading the first page | Loading *all* the pages |
|----------|------------------------|-------------------------|
| `master` | 332 | 3265 |
| `patch` | 163 | 996 |
The specification states that `CreationDate` is only available for
markup annotations instead of for all annotation types.
Moreover, popup annotations are not markup annotations according to the
specification, so the creation date inheritance from the parent
annotation is also removed there (note that only the modification date
is used in e.g., the viewer).
This includes the information in the core and display layers. The
date parsing logic from the document properties is rewritten according
to the specification and now includes unit tests.
Moreover, missing unit tests for the color of a popup annotation have
been added.
Finally the styling of the popup is changed slightly to make the text a
bit smaller (it's currently quite large in comparison to other viewers)
and to make the drop shadow a bit more subtle. The former is done to be
able to easily include the modification date in the popup similar to how
other viewers do this.
This way we can avoid manually building a "document id" in multiple places in `evaluator.js`, and it also let's us avoid passing in an otherwise unnecessary `PDFManager` instance when creating a `PartialEvaluator`.
Please see the specification, https://www.adobe.com/content/dam/acom/en/devnet/acrobat/pdfs/PDF32000_2008.pdf#M11.9.12864.1Heading.71.Viewer.Preferences
Furthermore, note that this patch *only* adds API support and unit-tests but does not attempt to integrate e.g. the `ViewerPreferences -> Direction` property into the viewer (which would be necessary to address issue 10736).
The reason for this is that it's not entirely clear to me exactly if/how that could be implemented; e.g. would it be as simple as setting the `dir` attribute on the `viewerContainer` DOM element, or will it be more complicated?
There's also the question of how the `ViewerPreferences -> Direction` value interacts with the `PageMode`, and this will generally require a fair bit of manual testing. Since the direction of the *entire* viewer depends on the browser locale, there's also a somewhat open question regarding what default value to use for different locales.
Finally, if the viewer supports `ViewerPreferences -> Direction` then I'm assuming that it will be necessary to allow users to override the default value, which will require (most likely) new `SecondaryToolbar` buttons and icons for those etc.
Hence this patch only lays the necessary foundation for eventually addressing issue 10736, but defers the actual implementation until later. (Time permitting, I'll try to look into the viewer part later.)
Currently if trying to set `disableRange=true` in the built-in PDF Viewer in Firefox, either through `about:config` or via the URL hash, the PDF document will never load. It appears that this has been broken for a couple of years, without anyone noticing.
Obviously it's not a good idea to set `disableRange=true`, however it seems that this bug affects the PDF Viewer in Firefox even with default settings:
- In the case where `initialData` already contains the *entire* file, we're forced to dispatch a range request to re-fetch already available data just so that file loading may complete.
- (In the case where the data arrives, via streaming, before being specifically requested through `requestDataRange`, we're also forced to re-fetch data unnecessarily.) *This part was removed, to reduce the scope/risk of the patch somewhat.*
In the cases outlined above, we're having to re-fetch already available data thus potentially delaying loading/rendering of PDF files in Firefox (and wasting resources in the process).
Support for the non-standard `moz-chunked-arraybuffer` response type is in the process of being removed from Firefox; see e.g. https://bugzilla.mozilla.org/show_bug.cgi?id=1411865
For the time being, you probably want to keep support for this in the general PDF.js library given that feature detection is used. However, removing the unit-test immediately seems reasonable, since it will otherwise start failing once the platform support for `moz-chunked-arraybuffer` is gone.
Fixes 8851; please note that if unit-tests for the code in `fetch_stream.js` are wanted, which I'm assuming they are, those should live in their own file rather than being lumped into `network_spec.js` anyway.
Moreover, group the lexer unit tests per method. This matches what we
do for other classes and makes it more easily visible which methods
we don't or insufficiently unit test.
The parser itself is not unit tested yet, so this patch provides a start
for doing so. The `inlineStreamSkipEI` method is used in other end
marker detection methods, so it's important that its functionality is
correct for proper parsing.
Note how `PDFDocumentProxy.destroy` is a nothing more than an alias for `PDFDocumentLoadingTask.destroy`. While removing the latter method would be a breaking API change, there's still room for at least some clean-up here.
The main changes in this patch are:
- Stop providing a `PDFDocumentLoadingTask` instance *separately* when creating a `PDFDocumentProxy`, since the loadingTask is already available through the `WorkerTransport` instance.
- Stop tracking the `PDFDocumentProxy` instance on the `WorkerTransport`, since that property is completely unused.
- Simplify the 'Multiple `getDocument` instances' unit-tests by only destroying *once*, rather than twice, for each document.
The `DOMCanvasFactory` class is now fully covered. Moreover, missing
cases for the `getFilenameFromUrl` function have been included.
Finally, `var` usage has been removed.
The `src/shared/util.js` file is being bundled into both the `pdf.js` and `pdf.worker.js` files, meaning that its code is by definition duplicated.
Some main-thread only utility functions have already been moved to a separate `src/display/display_utils.js` file, and this patch simply extends that concept to utility functions which are used *only* on the worker-thread.
Note in particular the `getInheritableProperty` function, which expects a `Dict` as input and thus *cannot* possibly ever be used on the main-thread.
This file (currently) contains not only DOM-specific helper functions/classes, but is used generally for various helper code relevant for main-thread functionality.
There doesn't appear to be any particular reason for only running these unit-tests in browsers, since the `PDFDataRangeTransport` functionality itself should be back-end agnostic.
This allows simplification of the 'creates pdf doc from URL and aborts loading after worker initialized' API unit-test.
Note that the `DOMFileReaderFactory` uses the Fetch API, for simplicity, since it should be available in all browsers where we're running tests.
In many cases in the code you don't actually care about the index itself, but rather just want to know if something exists in a String/Array or if a String starts in a particular way. With modern JavaScript functionality, it's thus possible to remove a number of existing `indexOf` cases.
This will allow the Metadata to be successfully extracted from the PDF file in issue 10395.
Furthermore, this patch also fixes a bug in `Metadata.get` which causes the method to return `null` rather than an empty string or zero (since either ought to be allowed).
Previously a couple of different attempts at fixing this problem has been rejected, given how *crucial* this code is for the correct function of the viewer, since no one has thus far provided any evidence that the problem actually affects the default viewer[1] nor an example using the viewer components directly (without another library on top).
The fact that none of the prior patches contained even a *simple* unit-test probably contributed to the unwillingness of a reviewer to sign off on the suggested changes.
However, it turns out that it's possible to create a reduced test-case, using the default viewer, that demonstrates the error[2]. Since this utilizes a hidden `<iframe>`, please note that this error will thus affect Firefox as well.
Note that while errors are thrown when the hidden `<iframe>` loads, the default viewer doesn't break completely since rendering does start working once the `<iframe>` becomes visible (although the errors do break the initial Toolbar state).
Before making any changes here, I carefully read through not just the immediately relevant code but also the rendering code in the viewer (given it's dependence on `getVisibleElements`). After concluding that the changes should be safe in general, the default viewer was tested without any issues found. (The above being much easier with significant prior experience of working with the viewer code.)
Finally the patch also adds new unit-tests, one of which explicitly triggers the relevant code-path and will thus fail with the current `master` branch.
This patch also makes `PDFViewerApplication` slightly more robust against errors during document opening, to ensure that viewer/document initialization always completes as expected.
Please keep in mind that even though this patch prevents an error in `getVisibleElements`, it's still not possible to set the initial position/zoom level/sidebar view etc. when the viewer is hidden since rendering and scrolling is completely dependent[3] on being able to actually access the DOM elements.
---
[1] And hence the PDF Viewer that's built-in to Firefox.
[2] Copy the HTML code below and save it as `iframe.html`, and place the file in the `web/` folder. Then start the server, with `gulp server`, and navigate to http://localhost:8888/web/iframe.html
```html
<!DOCTYPE html>
<html>
<head>
<title>Iframe test</title>
<script>
window.onload = function() {
const button = document.getElementById('button1');
const frame = document.getElementById('frame1');
button.addEventListener('click', function(evt) {
frame.hidden = !frame.hidden;
});
};
</script>
</head>
<body>
<button id="button1">Toggle iframe</button>
<br>
<iframe id="frame1" width="800" height="600" src="http://localhost:8888/web/viewer.html" hidden="true"></iframe>
</body>
</html>
```
[3] This is an old, pre-exisiting, issue that's not relevant to this patch as such (and it's already being tracked elsewhere).
The error was triggered for a particular set of metadata, where an end tag was encountered without the corresponding begin tag being present in the data.
(The patch also fixes a minor oversight, from a recent PR, in the `SimpleDOMNode.nextSibling` method.)
If, as PR 10368 suggests, more parameters should be added to `getViewport` I think that it would be a mistake to not change the signature *first* to avoid needlessly unwieldy call-sites.
To not break any existing code and third-party use-cases, this is obviously implemented with a deprecation warning *and* with a working fallback[1] for the old method signature.
---
[1] This is limited to `GENERIC` builds, which should be sufficient.
Note that the OpenAction dictionary may contain other information besides just a destination array, e.g. instructions for auto-printing[1].
Given first of all that an arbitrary `Dict` cannot be sent from the Worker (since cloning would fail), and second of all that the data obviously needs to be validated, this patch purposely only adds support for fetching a destination from the OpenAction entry[2].
---
[1] This information is, currently in PDF.js, being included through the `getJavaScript` API method.
[2] This significantly reduces the complexity of the implementation, which seems fine for now. If there's ever need for other kinds of OpenAction to be fetched, additional API methods could/should be implemented as necessary (could e.g. follow the `getOpenActionWhatever` naming scheme).
The custom entries, provided that they exist *and* that their types are safe to include, are exposed through a new `Custom` infoDict entry to clearly separate them from the standard ones.
Fixes 5970.
Fixes 10344.
Jasmine recommends to use the `configure` method on the environment
during boot. This commit makes the code correspond to how it's done in
Jasmine's default boot file. The options dropdown in the HTML reporter
now works again after these changes, because this broke in the upgrade
to Jasmine 3, and the unit tests are executed in a random order by
default, which is important to make sure the unit tests are
self-contained and don't depend on the result of another unit test.
This line in the annotation tests subtracts an array from a number. This is because `splice(-1, 1)` returns a one-element array, while `pop()` returns only the element itself.
*Please note:* I'm totally fine with this patch being rejected, and the issue closed as WONTFIX; however these changes should address the issue if that's desired.
From a conceptual point of view, reporting loading progress doesn't really make a lot of sense for PDF files opened by passing raw binary data directly to `getDocument` (since obviously *all* data was loaded).
This is compared to PDF files loaded via e.g. `XMLHttpRequest` or the Fetch API, where the entire PDF file isn't available from the start and knowing the loading progress makes total sense.
However I can certainly see why the current API could be considered inconsistent, which isn't great, since a registered `onProgress` callback will never be called for certain `getDocument` calls.
The simplest solution to this inconsistency thus seem to be to ensure that `onProgress` is always called when handling the `DataLoaded` message, since that will *always* be dispatched[1] from the worker-thread.
---
[1] Note that this isn't guaranteed to happen, since setting `disableAutoFetch = true` often prevents the *entire* file from ever loading. However, this isn't relevant for the issue at hand, and is a well-known consequence of using `disableAutoFetch = true`; note how the default viewer even has a specialized code-path for hiding the loadingBar.
*This patch is based on something that I noticed while working on PR 10126.*
The recent re-factoring of `PDFFindController` brought many improvements, among those the fact that access to `BaseViewer` is no longer required. However, with these changes there's one thing which now strikes me as not particularly user-friendly[1]: The fact that in order for searching to actually work, `PDFFindController.setDocument` must be called *and* a 'pagesinit' event must be dispatched (from somewhere).
For all other viewer components, calling the `setDocument` method[2] is enough in order for the component to actually be usable.
The `PDFFindController` thus stands out quite a bit, and it also becomes difficult to work with in any sort of custom implementation. For example: Imagine someone trying to use `PDFFindController` separately from the viewer[3], which *should* now be relatively simple given the re-factoring, and thus having to (somehow) figure out that they'll also need to manually dispatch a 'pagesinit' event for searching to work.
Note that the above even affects the unit-tests, where an out-of-place 'pagesinit' event is being used.
To attempt to address these problems, I'm thus suggesting that *only* `setDocument` should be used to indicate that searching may start. For the default viewer and/or the viewer components, `BaseViewer.setDocument` will now call `PDFFindController.setDocument` when the document is ready, thus requiring no outside configuration anymore[4]. For custom implementation, and the unit-tests, it's now as simple as just calling `PDFFindController.setDocument` to allow searching to start.
---
[1] I should have caught this during review of PR 10099, but unfortunately it's sometimes not until you actually work with the code in question that things like these become clear.
[2] Assuming, obviously, that the viewer component in question actually implements such a method :-)
[3] There's even a very recent issue, filed by someone trying to do just that.
[4] Short of providing a `PDFFindController` instance when creating a `BaseViewer` instance, of course.
This commit shows that we can now unit test the find controller and
that executing regular queries works. Note that this is only a first
step and not a complete suite of unit tests for all possible options
of the find controller.
While writing this unit test, I found two smaller issues that I
addressed directly. The first one is that in the previous find
controller refactoring I forgot to rename some occurrences of a now
private member variable. Fortunately this did not cause any bugs since
we did have a public getter and the fetched value may be changed by
reference, but it's nevertheless good to fix. The second issue is that
some entries in the `test/unit/clitests.json` file were not correct,
resulting in these tests not being executed on e.g., Travis CI.
As outlined in https://bugzilla.mozilla.org/show_bug.cgi?id=1282759 the internal Firefox name for the feature is `entireWord`, hence that name is used here as well for consistency (with "Whole words" being limited to the UI).
Given existing limitations of the PDF.js search functionality, e.g. the existing problems of searching across "new lines", there's some edge-cases where "Whole words" searching will ignore (valid) results.
However, considering that this is a pre-existing issue related to the way that the find controller joins text-content together, that shouldn't have to block this new feature in my opionion.
*Please note:* In order to enable this feature in the `MOZCENTRAL` version, a small follow-up patch for [PdfjsChromeUtils.jsm](https://hg.mozilla.org/mozilla-central/file/tip/browser/extensions/pdfjs/content/PdfjsChromeUtils.jsm) will be required once this has landed in `mozilla-central`.
There have been lots of problems with trying to map glyphs to their unicode
values. It's more reliable to just use the private use areas so the browser's
font renderer doesn't mess with the glyphs.
Using the private use area for all glyphs did highlight other issues that this
patch also had to fix:
* small private use area - Previously, only the BMP private use area was used
which can't map many glyphs. Now, the (much bigger) PUP 16 area can also be
used.
* glyph zero not shown - Browsers will not use the glyph from a font if it is
glyph id = 0. This issue was less prevalent when we mapped to unicode values
since the fallback font would be used. However, when using the private use
area, the glyph would not be drawn at all. This is illustrated in one of the
current test cases (issue #8234) where there's an "ä" glyph at position
zero. The PDF looked like it rendered correctly, but it was actually not
using the glyph from the font. To properly show the first glyph it is always
duplicated and appended to the glyphs and the maps are adjusted.
* supplementary characters - The private use area PUP 16 is 4 bytes, so
String.fromCodePoint must be used where we previously used
String.fromCharCode. This is actually an issue that should have been fixed
regardless of this patch.
* charset - Freetype fails to load fonts when the charset size doesn't match
number of glyphs in the font. We now write out a fake charset with the
correct length. This also brought up the issue that glyphs with seac/endchar
should only ever write a standard charset, but we now write a custom one.
To get around this the seac analysis is permanently enabled so those glyphs
are instead always drawn as two glyphs.
This patch is the first step to be able to eventually get rid of the `attachDOMEventsToEventBus` function, by allowing `EventBus` instances to simply re-dispatch most[1] events to the DOM.
Note that the re-dispatching is purposely implemented to occur *after* all registered `EventBus` listeners have been serviced, to prevent the ordering issues that necessitated the duplicated page/scale-change events.
The DOM events are currently necessary for the `mozilla-central` tests, see https://hg.mozilla.org/mozilla-central/file/tip/browser/extensions/pdfjs/test, and perhaps also for custom deployments of the PDF.js default viewer.
Once this have landed, and been successfully uplifted to `mozilla-central`, I intent to submit a patch to update the test-code to utilize the new preference. This will thus, eventually, make it possible to remove the `attachDOMEventsToEventBus` functionality.
*Please note:* I've successfully ran all `mozilla-central` tests locally, with these patches applied.
---
[1] The exception being events that originated on the `window` or `document`, since those are already globally available anyway.
This commit is the first step towards implementing parsing for the
appearance streams of annotations.
Co-authored-by: Jonas Jenwald <jonas.jenwald@gmail.com>
Co-authored-by: Tim van der Meij <timvandermeij@gmail.com>
The font tests use Jasmine too, so while they are technically unit
tests, it's a bit confusing to see `Started unit tests` when the font
tests are run on the bots.
This should really have been included in PR 9868, since it will help ensure that the `URL` constructor is correctly imported/exported by `src/shared/util.js`.
There was a (somewhat) recent question on IRC about accessing the linearization status of a PDF document, and this patch contains a simple way to expose that through already existing API methods.
Please note that during setup/parsing in `PDFDocument` the linearization data is already being fetched and parsed, provided of course that it exists. Hence this patch will *not* cause any additional data to be loaded.
With the new XML parser, see PR 9573, the referenced PDF file now causes `getMetadata` to fail when incomplete XML tags are encountered. This provides a simple, and hopefully generally useful, work-around that may also help prevent future bugs.
(Without being able to reproduce nor even understand the other (non XML) errors mentioned in issue 8884, I'd say that this patch is enough to close that one as fixed.)
Currently if `RenderTask.cancel` is called *immediately* after rendering was started, then by the time that `InternalRenderTask.initializeGraphics` is called rendering will already have been cancelled.
However, we're still inserting the canvas into the `canvasInRendering` map, thus breaking any future attempts at re-rendering using the same canvas. Considering that `InternalRenderTask.cancel` always removes the canvas from the map, I cannot imagine that we'd ever want to re-add it *after* rendering was cancelled (it was likely just a simple oversight in PR 8519).
Fixes 9456.
This wasn't included in PR 9245, since all the API options were still global at that time.
Writing the unit-tests also uncovered an issue with `getOperatorList` not starting the "Page Request" timer.
Incomplete path operators, in particular, can result in fairly chaotic rendering artifacts, as can be observed on page four of the referenced PDF file.
The initial (naive) solution that was attempted, was to simply throw a `FormatError` as soon as any invalid (i.e. too short) operator was found and rely on the existing `ignoreErrors` code-paths. However, doing so would have caused regressions in some files; see the existing `issue2391-1` test-case, which was promoted to an `eq` test to help prevent future bugs.
Hence this patch, which adds special handling for invalid path operators since those may cause quite bad rendering artifacts.
You could, in all fairness, argue that the patch is a handwavy solution and I wouldn't object. However, given that this only concerns *corrupt* PDF files, the way that PDF viewers (PDF.js included) try to gracefully deal with those could probably be described as a best-effort solution anyway.
This patch also adjusts the existing `warn`/`info` messages to print the command name according to the PDF specification, rather than an internal PDF.js enumeration value. The former should be much more useful for debugging purposes.
Fixes https://bugzilla.mozilla.org/show_bug.cgi?id=1443140.
With the current code line-breaks are accepted not just after an operator, but after a decimal point as well. When looking at this again, the latter case seems prone to cause false positives and might also interfere with subsequent patches.
Hence this is code is adjusted to actually do what the original commit message says, and nothing more.
The built-in image decoders are already using `Uint8ClampedArray` when returning data, and this patch simply extends that to the rest of the image/colorspace code.
As far as I can tell, the only reason for using manual clamping/rounding in the first place was because TypedArrays used to be polyfilled (using regular arrays). And trying to polyfill the native clamping/rounding would probably have been had too much overhead, but given that TypedArray support is required in PDF.js version `2.0` that's no longer a concern.
*Please note:* Because of different rounding behaviour, basically `Math.round` in `Uint8ClampedArray` respectively `Math.floor` in the old code, there will be very slight movement in quite a few existing test-cases. However, the changes should be imperceivable to the naked eye, given that the absolute difference is *at most* `1` for each RGB component when comparing `master` and this patch (see also the updated expectation values in the unit-tests).
The built-in image decoders are already returning data as `Uint8ClampedArray`, and subsequently the JPEG/JBIG2/JPX streams are as well. However, for general streams we obviously don't want to force the use of `Uint8ClampedArray` unless an "Image" is actually being decoded.
Hence this patch, which adds a parameter that allows the caller of the `getBytes`/`peekBytes` methods to force a `Uint8ClampedArray` (rather than a `Uint8Array`) to be returned.
The various classes have `this._errored` and `this._reason` properties, where the first one is a boolean indicating if an error was encountered and the second one contains the actual `Error` (or `null` initially).
In practice this means that errors are basically tracked *twice*, rather than just once. This kind of double-bookkeeping is generally a bad idea, since it's quite easy for the properties to (accidentally) get into an inconsistent state whenever the relevant code is modified.
Rather than using a separate boolean, we can just as well check the "error" property directly (since `null` is falsy).
---
Somewhat unrelated to this patch, but `src/display/node_stream.js` is currently *not* handling errors in a consistent or even correct way; compared with `src/display/network.js` and `src/display/fetch_stream.js`.
Obviously using the `createResponseStatusError` utility function, from `src/display/network_utils.js`, might not make much sense in a Node.js environment. However at the *very* least it seems that `MissingPDFException`, or `UnknownErrorException` when one cannot tell that the PDF file is "missing", should be manually thrown.
As is, the API (i.e. `getDocument`) is not returning the *expected* errors when loading fails in Node.js environments (as evident from the `pending` API unit-test).
There's no good reason, as far as I can tell, to duplicate the functionality of the `LoopbackPort` in the unit-tests. The only difference between the implementations is that `LoopbackPort` mimics the (native) structured cloning, however that shouldn't matter here since the tests are only sending "simple" data (strings respectively arrays with numbers).
Furthermore the patch also changes `LoopbackPort` to default to using "structured cloning" and deferred invocation of the listeners, since native typed array support is now a requirement for using the PDF.js library.
The `MessageHandler` itself, and its assorted helper functions, are currently the single largest[1] piece of code in the `src/shared/util.js` file. By moving this code into its own file, `src/shared/util.js` thus becomes smaller and more manageable.
Compared to running the unit-tests in "regular" browsers, where any console output won't get mixed up with test output, in Node.js/Travis the test output looks quite noisy.
By ignoring `info`/`warn` calls, when running unit-tests in Node.js/Travis, the test output is a lot smaller not to mention that any *actual* failures are more easily spotted.
A couple of basic unit-tests are added, and a manual `isLandscape` check (in `web/base_viewer.js`) is also converted to use the helper function instead.
Jasmine had a major version bump and required a few minor changes in our
booting code. Most notably, using `pending` in a `describe` block is no
longer supported, so we can only return early there. On the positive
side, the unit tests now run in a random order by default, which
eliminates any dependencies between unit tests.
Note that upgrading to Webpack 4 is out of scope for this patch since
the bots cannot work well with the newly generated bundles (both
browsers on both bots do not react within 120 seconds). Webpack 4 is not
faster for us than Webpack 3, so for now there is no need to upgrade.
The `getPageSizeInches` method was implemented on `PDFDocumentProxy`, which seems conceptually wrong since the size property isn't global to the document but rather specific to each page. Hence the method is moved into `PDFPageProxy`, as `get pageSizeInches` instead to address this.
Despite the fact that new API functionality was implemented, no unit-tests were added. To prevent issues later on, we should *always* ensure that new functionality has at least some test-coverage; something that this patch also takes care of.
The new `PDFDocumentProperties._parsePageSize` method seemed unnecessary convoluted. Furthermore, in the "no data provided"-case it even returned incorrect data (an array, rather than the expected object).
Finally, the fallback strings didn't actually agree with the `en-US` locale. This inconsistency doesn't look too great, and it's thus addressed here as well.
This function combines the logic of two separate methods into one.
The loop limit is also a good thing to have for the calls in
`src/core/annotation.js`.
Moreover, since this is important functionality, a set of unit tests and
documentation is added.
With PDF.js version `2.0` we'll only support browsers with built-in `TypedArray` functionality, hence there doesn't seem to be any good reason not to implement this now.
Fixes 4888.
This removes the `PDFJS.externalLinkTarget`/`PDFJS.externalLinkRel` dependency from the viewer components, but please note that as a *temporary* solution the default viewer still uses it.
Despite this patch removing the `disableWorker` option itself, please note that we'll still fallback to loading the worker file(s) on the main-thread when running in environments without proper Web Worker support.
Furthermore it's still possible, even with this patch, to force the use of fake workers by manually loading the necessary file using a `<script>` tag on the main-thread.[1]
That way, the functionality of the now removed `SINGLE_FILE` build target and the resulting `build/pdf.combined.js` file can still be achieved simply by adding e.g. `<script src="build/pdf.worker.js"></script>` to the HTML (obviously with the path adjusted as needed).
Finally note that the `disableWorker` option is a performance footgun, and unfortunately many existing third-party examples actually use it without providing any sort of warning/justification.
---
[1] This approach is used in the default viewer, since certain kind of debugging may be easier if the code is running directly on the main-thread.
This method returns the currently used `workerSrc`, which thus allows obtaining the fallback `workerSrc` value (e.g. when the option wasn't set by the user).
Remove "returns null when content disposition is form-data".
The name of the test is already misleading: It suggests that
the return value is null if the Content-Disposition starts with
"form-data". This is not the case, anything with the "filename"
parameter is accepted.
So, to correct this, one would have to rephrase the test description to
"returns null when content disposition has no filename".
But this is already tested by the test called
"gets the filename from the response header".
So, remove the test.
This patch updates the `IPDFStreamReader` interface and ensures that the interface/implementation of `network.js`, `fetch_stream.js`, `node_stream.js`, and `transport_stream.js` all match properly.
The unit-tests are also adjusted, to more closely replicate the actual behaviour of the various actual `IPDFStreamReader` implementations.
Finally, this patch adjusts the use of the Content-Disposition filename when setting the title in the viewer, and adds `PDFDocumentProperties` support as well.
