Rather than "swallowing" the actual Errors, when data fetching fails, ensure that they're always being propagated as intended to the call-site instead.
Note that we purposely handle `XRefEntryException` specially, to make it possible to fallback to indexing all XRef objects.
Rather than trying, and failing, to fetch the entire /Pages-tree for documents with corrupt XRef tables, let's fallback to indexing all objects *before* trying to invoke the `Catalog.getAllPageDicts` method.
*Please note:* This is similar to the method that existed prior to PR 3848, but the new method will *only* be used as a fallback when parsing of corrupt PDF documents.
The implementation in PR 14311 unfortunately turned out to be *way* too simplistic, as evident by the recently added test-files in issue 14303, since it may *cause* infinite loops in `PDFDocument.checkLastPage` for some corrupt PDF documents.[1]
To avoid this, the easiest solution that I could come up with was to fallback to eagerly parsing the *entire* /Pages-tree when the /Count-entry validation fails during document initialization.
Fixes *at least* two of the issues listed in issue 14303, namely the `poppler-395-0.pdf...` and `GHOSTSCRIPT-698804-1.pdf...` documents.
---
[1] The whole point of PR 14311 was obviously to *get rid of* infinte loops during document initialization, not to introduce any more of those.
This was added in PR 14311, but given that I completely missed to update the `PDFDocument.getPage` signature accordingly it's completely unused.
Given that things work just as fine as-is, let's simply remove that optional parameter for now; sorry about the churn here!
*This patch basically extends the approach from PR 10392, by also checking the last page.*
Currently, in e.g. the `Catalog.numPages`-getter, we're simply assuming that if the /Pages-tree has an *integer* /Count entry it must also be correct/valid.
As can be seen in the referenced PDF documents, that entry may be completely bogus which causes general parsing to breaking down elsewhere in the worker-thread (and hanging the browser).
Rather than hoping that the /Count entry is correct, similar to all other data found in PDF documents, we obviously need to validate it. This turns out to be a little less straightforward than one would like, since the only way to do this (as far as I know) is to parse the *entire* /Pages-tree and essentially counting the pages.
To avoid doing that for all documents, this patch tries to take a short-cut by checking if the last page (based on the /Count entry) can be successfully fetched. If so, we assume that the /Count entry is correct and use it as-is, otherwise we'll iterate through (potentially) the *entire* /Pages-tree to determine the number of pages.
Unfortunately these changes will have a number of *somewhat* negative side-effects, please see a possibly incomplete list below, however I cannot see a better way to address this bug.
- This will slow down initial loading/rendering of all documents, at least by some amount, since we now need to fetch/parse more of the /Pages-tree in order to be able to access the *last* page of the PDF documents.
- For poorly generated PDF documents, where the entire /Pages-tree only has *one* level, we'll unfortunately need to fetch/parse the *entire* /Pages-tree to get to the last page. While there's a cache to help reduce repeated data lookups, this will affect initial loading/rendering of *some* long PDF documents,
- This will affect the `disableAutoFetch = true` mode negatively, since we now need to fetch/parse more data during document initialization. While the `disableAutoFetch = true` mode should still be helpful in larger/longer PDF documents, for smaller ones the effect/usefulness may unfortunately be lost.
As one *small* additional bonus, we should now also be able to support opening PDF documents where the /Pages-tree /Count entry is completely invalid (e.g. contains a non-integer value).
Fixes two of the issues listed in issue 14303, namely the `poppler-67295-0.pdf` and `poppler-85140-0.pdf` documents.
Given that not all pages necessarily are being accessed, or that the pages may be accessed out of order, using a `Map` seems like a more appropriate data-structure here.
Furthermore, this patch also adds (currently missing) caching for XFA-documents. Loading a couple of such documents in the viewer, with logging added, shows that we're currently re-creating `Page`-instances unnecessarily for XFA-documents.
- First step to fix https://bugzilla.mozilla.org/show_bug.cgi?id=1737260;
- several interactive pdfs use the possibility to hide/show buttons to show different icons;
- render pushbuttons on their own canvas and then insert it the annotation_layer;
- update test/driver.js in order to convert canvases for pushbuttons into images.
*Please note:* This is a tentative patch, since I don't have the necessary a11y-software to actually test it.
To avoid having to add a new API-method just for a single string, I figured that adding the new property to the existing `documentInfo`-data (accessed via `PDFDocumentProxy.getMetadata` in the API) will hopefully be deemed acceptable.
In these cases there's no good reason, in my opinion, to duplicate the `shadow`-lines since that unnecessarily increases the risk of simple typos (see the previous patch).
With this typo the shadowing doesn't actually work, which causes these checks to be unnecessarily repeated. In this particular case it didn't have a significant performance impact, however we should definately fix this nonetheless.
There's a fair number of regular expressions througout the code-base which are slightly more verbose than strictly necessary, in particular:
- We have a lot of regular expressions that use `[0-9]` explicitly, and those can be simplified to use `\d` instead.
- We have one instance of a regular expression containing a `A-Za-z0-9_` sequence, which can be simplified to use `\w` instead.
*This is a follow-up to PRs 13867 and 13899.*
This patch is tagged `api-minor` for the following reasons:
- It replaces the `renderInteractiveForms`/`includeAnnotationStorage`-options, in the `PDFPageProxy.render`-method, with the single `annotationMode`-option that controls which annotations are being rendered and how. Note that the old options were mutually exclusive, and setting both to `true` would result in undefined behaviour.
- For improved consistency in the API, the `annotationMode`-option will also work together with the `PDFPageProxy.getOperatorList`-method.
- It's now also possible to disable *all* annotation rendering in both the API and the Viewer, since the other changes meant that this could now be supported with a single added line on the worker-thread[1]; fixes 7282.
---
[1] Please note that in order to simplify the overall implementation, we'll purposely only support disabling of *all* annotations and that the option is being shared between the API and the Viewer. For any more "specialized" use-cases, where e.g. only some annotation-types are being rendered and/or the API and Viewer render different sets of annotations, that'll have to be handled in third-party implementations/forks of the PDF.js code-base.
*This patch is very similar to the recently fixed `renderInteractiveForms`-options, see PR 13867.*
As far as I can tell, this *subtle* bug has existed ever since `AnnotationStorage`-support was first added in PR 12106 (a little over a year ago).
The value of the `includeAnnotationStorage`-option, as passed to the `PDFPageProxy.render` method, will (potentially) affect the size/content of the operatorList that's returned from the worker (for documents with forms).
Given that operatorLists will generally, unless they contain huge images, be cached in the API, repeated `PDFPageProxy.render` calls where the form-data has been changed by the user in between, can thus *wrongly* return a cached operatorList.
In the viewer we're only using the `includeAnnotationStorage`-option when printing, which is probably why this has gone unnoticed for so long. Note that we, for performance reasons, don't cache printing-operatorLists in the API.
However, there's nothing stopping an API-user from using the `includeAnnotationStorage`-option during "normal" rendering, which could thus result in *subtle* (and difficult to understand) rendering bugs.
In order to handle this, we need to know if the `AnnotationStorage`-instance has been updated since the last `PDFPageProxy.render` call. The most "correct" solution would obviously be to create a hash of the `AnnotationStorage` contents, however that would require adding a bunch of code, complexity, and runtime overhead.
Given that operatorList caching in the API doesn't have to be perfect[1], but only have to avoid *false* cache-hits, we can simplify things significantly be only keeping track of the last time that the `AnnotationStorage`-data was modified.
*Please note:* While working on this patch, I also noticed that the `renderInteractiveForms`- and `includeAnnotationStorage`-options in the `PDFPageProxy.render` method are mutually exclusive.[2]
Given that the various Annotation-related options in `PDFPageProxy.render` have been added at different times, this has unfortunately led to the current "messy" situation.[3]
---
[1] Note how we're already not caching operatorLists for pages with *huge* images, in order to save memory, hence there's no guarantee that operatorLists will always be cached.
[2] Setting both to `true` will result in undefined behaviour, since trying to insert `AnnotationStorage`-values into fields that are being excluded from the operatorList-building will obviously not work, which isn't at all clear from the documentation.
[3] My intention is to try and fix this in a follow-up PR, and I've got a WIP patch locally, however it will result in a number of API-observable changes.
The value of the `renderInteractiveForms` parameter, as passed to the `PDFPageProxy.render` method, will (potentially) affect the size/content of the operatorList that's returned from the worker (for documents with forms).
Given that operatorLists will generally, unless they contain huge images, be cached in the API, repeated `PDFPageProxy.render` calls that *only* change the `renderInteractiveForms` parameter can thus return an incorrect operatorList.
As far as I can tell, this *subtle* bug has existed ever since `renderInteractiveForms`-support was first added in PR 7633 (which is almost five years ago).
With the previous patch, fixing this is now really simple by "encoding" the `renderInteractiveForms` parameter in the *internal* renderingIntent handling.
With the changes made in PR 13746 the *internal* renderingIntent handling became somewhat "messy", since we're now having to do string-matching in various spots in order to handle the "oplist"-intent correctly.
Hence this patch, which implements the idea from PR 13746 to convert the `intent`-strings, used in various API-methods, into an *internal* renderingIntent that's implemented using a bit-field instead. *Please note:* This part of the patch, in itself, does *not* change the public API (but see below).
This patch is tagged `api-minor` for the following reasons:
1. It changes the *default* value for the `intent` parameter, in the `PDFPageProxy.getAnnotations` method, to "display" in order to be consistent across the API.
2. In order to get *all* annotations, with the `PDFPageProxy.getAnnotations` method, you now need to explicitly set "any" as the `intent` parameter.
3. The `PDFPageProxy.getOperatorList` method will now also support the new "any" intent, to allow accessing the operatorList of all annotations (limited to those types that have one).
4. Finally, for consistency across the API, the `PDFPageProxy.render` method also support the new "any" intent (although I'm not sure how useful that'll be).
Points 1 and 2 above are the significant, and thus breaking, changes in *default* behaviour here. However, unfortunately I cannot see a good way to improve the overall API while also keeping `PDFPageProxy.getAnnotations` unchanged.
- All the scale factors in for the substitution font were wrong because of different glyph positions between Liberation and the other ones:
- regenerate all the factors
- Text may have polish chars for example and in this case the glyph widths were wrong:
- treat substitution font as a composite one
- add a map glyphIndex to unicode for Liberation in order to generate width array for cid font
This patch makes use of the existing `ignoreErrors` option, thus allowing a page to continue parsing/rendering even if (some of) its sub-streams are corrupt. Obviously this may cause *part* of a page to be broken/missing, however it should be better than (potentially) rendering nothing.
Also, to the best of my knowledge, this is the first bug of its kind that we've encountered.
To avoid having to pass in a bunch of, for a `BaseStream`-instance, mostly unrelated parameters when initializing a `StreamsSequenceStream`-instance, I settled on utilizing a callback function instead to allow conditional Error-suppression.
Note that the `StreamsSequenceStream`-class is a *special* stream-implementation that we only use when the `/Contents`-entry, in the `/Page`-dictionary, consists of an Array with streams.
With this patch, the `PDFPageProxy.getOperatorList` method will now return `PDFOperatorList`-instances that also include Annotation-operatorLists (when those exist). Hence this closes a small, but potentially confusing, gap between the `render` and `getOperatorList` methods.
Previously we've been somewhat reluctant to do this, as explained below, but given that there's actual use-cases where it's required probably means that we'll *have* to implement it now.
Since we still need the ability to separate "normal" rendering operations from direct `getOperatorList` calls in the worker-thread, this API-change unfortunately causes the *internal* renderingIntent to become a bit "messy" which is indeed unfortunate (note the `"oplist-"` strings in various spots). As-is I suppose that it's not all that bad, but we may want to consider changing the *internal* renderingIntent to e.g. a bitfield in the future.
Besides fixing issue 13704, this patch would also be necessary if someone ever tries to implement e.g. issue 10165 (since currently `PDFPageProxy.getOperatorList` doesn't include Annotation-operatorLists).
*Please note:* This patch is *also* tagged "api-minor" for a second reason, which is that we're now including the Annotation-id in the `beginAnnotation` argument. The reason for this is to allow correlating the Annotation-data returned by `PDFPageProxy.getAnnotations`, with its corresponding operatorList-data (for those Annotations that have it).
The PDF.js API has only ever supported accessing the original file ID, however the second one that (should) exist in *modified* documents have thus far been completely inaccessible through the API.
That seems like a simple oversight, caused e.g. by the viewer not needing it, since it really shouldn't hurt to provide API-users with the ability to check if a PDF document has been modified since its creation.[1]
Please refer to https://www.adobe.com/content/dam/acom/en/devnet/pdf/pdfs/PDF32000_2008.pdf#G13.2261661 for additional information.
For an example of how to update existing code to use the new API, please see the changes in the `web/app.js` file included in this patch.
*Please note:* While I'm not sure if we'll ever be able to remove the old `PDFDocumentProxy.fingerprint` getter, given that it's existed since "forever", that probably isn't a big deal given that it's now limited to only `GENERIC`-builds.
---
[1] Although this obviously depends on the PDF software following the specification, by updating the second file ID as intended.
- some pdf use some fonts which are not embedded or they don't have any width array or don't have any css info (e.g. for standard fonts or Arial).
- so add widths arrays for Liberation fonts in order to compute the ones for other fonts in using scale factors array.
- when binding (after parsing) we get a map between some template nodes and some data nodes;
- so set user data in input handlers in using data node uids in the annotation storage;
- to save the form, just put the value we have in the storage in the correct data nodes, serialize the xml as a string and then write the string at the end of the pdf using src/core/writer.js;
- fix few bugs around data bindings:
- the "Off" issue in Bug 1716980.
- partial fix for https://bugzilla.mozilla.org/show_bug.cgi?id=1716980;
- some pdf can contain an invalid font family (e.g. 'Windings 3') so in this case remove the space;
- the font family in typeface attribute doesn't always match the one defined in the FontDescriptor dictionary.
- some containers doesn't always have their 2 dimensions and those dimensions re based on contents;
- so in order to measure text, we must get the glyph widths (for the xfa fonts) before starting the layout;
- implement a word-wrap algorithm;
- handle font change during text layout.
*This implementation is basically a copy of the pre-existing `builtInCMapCache` implementation.*
For some, badly generated, PDF documents it's possible that we'll end up having to fetch the *same* standard font data over and over (which is obviously inefficient).
While not common, it's certainly possible that a PDF document uses *custom* font names where the actual font then references one of the standard fonts; see e.g. issue 11399 for one such example.
Note that I did suggest adding worker-thread caching of standard font data in PR 12726, however it wasn't deemed necessary at the time. Now that we have a real-world example that benefit from caching, I think that we should simply implement this now.
- Some js files contain scale factors for each glyph in order to rescale Liberation to have a final font with the correct width.
- A lot of XFA have some containers where their dimensions are based on their text content, so using default font from browser can lead to an almost unreadable pdf.
- the only goal of this patch is to be able to get synchronously the fake html when printing from firefox:
- in order to print we need to inject some html in beforeprint callback but we cannot block in waiting for all the pages.
- from a memory point of view: it doesn't change anything since the fake HTML is deleted in the worker;
- this way we don't break any assumptions.
To get the maximum benefit from something like Prettier, you obviously don't want to disable the automatic formatting unless absolutely necessary. When we added Prettier there were a number of cases, mostly involving larger Arrays, which required disabling of the automatic formatting for overall readability and/or to not break inline comments.
With changes in Prettier version `2.3.0`, see [the release notes](https://prettier.io/blog/2021/05/09/2.3.0.html#concise-formatting-of-number-only-arrays-10106httpsgithubcomprettierprettierpull10106-10160httpsgithubcomprettierprettierpull10160-by-thorn0httpsgithubcomthorn0), there's now better formatting support for Arrays containing only numbers. Hence we can now remove a number of `// prettier-ignore` comments, and thus get the benefit of automatic formatting in (slightly) more of the code-base.
First of all, by using `Dict.getArray` in the `Page.content` getter we remove the need to manually iterate through and fetch the sub-streams (when they exist) in the `Page.getContentStream` method.
Secondly, we can simplify the code in `Page.{getOperatorList, extractTextContent}` by letting `Page.getContentStream` ensure that `content` is available and returning a Promise instead.
Given that the `bytesToString(BaseStream.getBytes(...))` pattern is somewhat common throughout the `src/core/` code, it cannot hurt to add a new `BaseStream`-method which handles that case internally.
By not waiting for the /Properties to load, before parsing of the operatorList/textContent starts, there's a very real risk that a `MissingDataException` will be thrown when trying to access the data in the `PartialEvaluator.parseMarkedContentProps` method.
If this ever happens it will thus lead to incomplete and/or outright broken rendering, and with e.g. `disableAutoFetch=true` set the likelihood of this occuring would increase quite a bit.
*Please note:* While I've not yet seen this error in an actual PDF document, it can happen during loading if you're unlucky enough with e.g. the structure of the PDF document and/or the download speed offered by the server.
- Use `PDFManager.ensureDoc`, rather than `PDFManager.ensure`, in a couple of spots in the code. If there exists a short-hand format, we should obviously use it whenever possible.
- Fix a unit-test helper, to account for the previous changes. (Also, converts a function to be `async` instead.)
- Add one more exists-check in `PDFDocument.loadXfaFonts`, which I missed to suggest in PR 13146, to prevent any possible errors if the method is ever called in a situation where it shouldn't be.
Also, print a warning if the actual font-loading fails since that could help future debugging. (Finally, reduce overall indentation in the loop.)
- Slightly unrelated, but make a small tweak of a comment in `src/core/fonts.js` to reduce possible confusion.
