There's a fair number of (primarily) `Array`s/`TypedArray`s whose formatting we don't want disturb, since in many cases that would lead to the code becoming much more difficult to read and/or break existing inline comments.
*Please note:* It may be a good idea to look through these cases individually, and possibly re-write some of the them (especially the `String` ones) to reduce the need for all of these ignore commands.
I recently noticed a couple of intermittent failures on Travis, hence this patch which changes the expectation to be identical to the 'Page Request' check in the preceding test-case.
Note that most (reasonably) modern browsers have supported this for a while now, see https://developer.mozilla.org/en-US/docs/Web/API/ReadableStream#Browser_compatibility
By moving the polyfill into `src/shared/compatibility.js` we can thus get rid of the need to manually export/import `ReadableStream` and simply use it directly instead.
The only change here which *could* possibly lead to a difference in behavior is in the `isFetchSupported` function. Previously we attempted to check for the existence of a global `ReadableStream` implementation, which could now pass (assuming obviously that the preceding checks also succeeded).
However I'm not sure if that's a problem, since the previous check only confirmed the existence of a native `ReadableStream` implementation and not that it actually worked correctly. Finally it *could* just as well have been a globally registered polyfill from an application embedding the PDF.js library.
Given that the error in question is surfaced on the API-side, this patch makes the following changes:
- Updates the wording such that it'll hopefully be slightly easier for users to understand.
- Changes the plain `Error` to an `InvalidPDFException` instead, since that should work better with the existing Error handling.
- Adds a unit-test which loads an empty PDF document (and also improves a pre-existing `InvalidPDFException` message and its test-case).
The bug report seem to suggest that we don't support UTF-16 strings with a BOM (byte order mark), which we *actually* do as evident by both the code and a unit-test.
The issue at play here is rather that we previously only supported big-endian UTF-16 BOM, and the `Title` string in the PDF document is using a *little-endian* UTF-16 BOM instead.
Fixes https://bugzilla.mozilla.org/show_bug.cgi?id=1593902
As can be seen in `PageViewport` only multiples of 90 degrees are really supported by the code, hence the unit-test doesn't really make sense.
(Possibly this should be enforced in the API, to avoid surprises, but given that this problem has always existed I'm passing on that for now.)
Having these methods fallback to returning `null` in only *one* particular case seems outright wrong, since a "falsy" value will thus be handled incorrectly.
The only reason that this hasn't caused issues in practice is that there's only one call-site passing in three keys, and in that case we're trying to read a font file where falling back to `null` isn't a problem.
Hopefully this patch makes sense, and in order to reduce the regression risk the implementation ensures that only completely missing widths are being replaced.
Having recently worked with this code, it struck me that most of the `postMessage` calls where `Error`s are involved have never been correctly implemented (i.e. missing `wrapReason` calls).
These functions aren't returning anything, now that they're using `ReadableStream`s, and it thus doesn't seem necessary to re-throw errors (also given the console message that's caused by it).
*Please note:* The majority of this patch was written by Yury, and it's simply been rebased and slightly extended to prevent issues when dealing with `RenderingCancelledException`.
By leveraging streams this (finally) provides a simple way in which parsing can be aborted on the worker-thread, which will ultimately help save resources.
With this patch worker-thread parsing will *only* be aborted when the document is destroyed, and not when rendering is cancelled. There's a couple of reasons for this:
- The API currently expects the *entire* OperatorList to be extracted, or an Error to occur, once it's been started. Hence additional re-factoring/re-writing of the API code will be necessary to properly support cancelling and re-starting of OperatorList parsing in cases where the `lastChunk` hasn't yet been seen.
- Even with the above addressed, immediately cancelling when encountering a `RenderingCancelledException` will lead to worse performance in e.g. the default viewer. When zooming and/or rotation of the document occurs it's very likely that `cancel` will be (almost) immediately followed by a new `render` call. In that case you'd obviously *not* want to abort parsing on the worker-thread, since then you'd risk throwing away a partially parsed Page and thus be forced to re-parse it again which will regress perceived performance.
- This patch is already *somewhat* risky, given that it touches fundamentally important/critical code, and trying to keep it somewhat small should hopefully reduce the risk of regressions (and simplify reviewing as well).
Time permitting, once this has landed and been in Nightly for awhile, I'll try to work on the remaining points outlined above.
Co-Authored-By: Yury Delendik <ydelendik@mozilla.com>
Co-Authored-By: Jonas Jenwald <jonas.jenwald@gmail.com>
This is based on a real-world PDF file I encountered very recently[1], although I'm currently unable to recall where I saw it.
Note that different PDF viewers handle these sort of errors differently, with Adobe Reader outright failing to render the attached PDF file whereas PDFium mostly handles it "correctly".
The patch makes the following notable changes:
- Refactor the `cropBox` and `mediaBox` getters, on the `Page`, to reduce unnecessary duplication. (This will also help in the future, if support for extracting additional page bounding boxes are added to the API.)
- Ensure that the page bounding boxes, i.e. `cropBox` and `mediaBox`, are never empty to prevent issues/weirdness in the viewer.
- Ensure that the `view` getter on the `Page` will never return an empty intersection of the `cropBox` and `mediaBox`.
- Add an *optional* parameter to `Util.intersect`, to allow checking that the computed intersection isn't actually empty.
- Change `Util.intersect` to have consistent return types, since Arrays are of type `Object` and falling back to returning a `Boolean` thus seem strange.
---
[1] In that case I believe that only the `cropBox` was empty, but it seemed like a good idea to attempt to fix a bunch of related cases all at once.
With the changes to the `StreamType`/`FontType` "enums" in PR 11029, one unfortunate result is that `getStats` now *always* returns empty Arrays. Something that everyone, myself included, apparently missed is that you obviously cannot index an Array with Strings :-)
I wrongly assumed that the unit-tests would catch any bugs, but they apparently suffered from the same issue as the code in `src/core/`.
Another possible option could perhaps be to use `Set`s, rather than objects, but that will require larger changes since `LoopbackPort` (in `src/display/api.js`) doesn't support them.
There's a number of spots in the current code, and tests, where `cancel` methods are not called with appropriate arguments (leading to Promises not being rejected with Errors as intended).
In some cases the cancel `reason` is implicitly set to `undefined`, and in others the cancel `reason` is just a plain String. To address this inconsistency, the patch changes things such that cancelling is done with `AbortException`s everywhere instead.
For very large and complex PDF files this will help performance slightly, since `Parser.shift` is called *a lot* during parsing.
This patch was tested using the PDF file from issue 2618, i.e. http://bugzilla-attachments.gnome.org/attachment.cgi?id=226471 (with well over *four million* `Parser.shift` calls for just the one page), using the following manifest file:
```
[
{ "id": "issue2618",
"file": "../web/pdfs/issue2618.pdf",
"md5": "",
"rounds": 100,
"type": "eq"
}
]
```
This gave the following results when comparing this patch against the `master` branch:
```
-- Grouped By browser, stat --
browser | stat | Count | Baseline(ms) | Current(ms) | +/- | % | Result(P<.05)
------- | ------------ | ----- | ------------ | ----------- | --- | ----- | -------------
Firefox | Overall | 100 | 3386 | 3322 | -65 | -1.92 | faster
Firefox | Page Request | 100 | 1 | 1 | 0 | -8.08 |
Firefox | Rendering | 100 | 3385 | 3321 | -65 | -1.92 | faster
```
A lot of the `new Parser()` call-sites look quite unwieldy/ugly as-is, with a bunch of somewhat randomly ordered arguments, which we can avoid by changing the constructor to accept an object instead. As an added bonus, this provides better documentation without having to add inline argument comments in the code.
This is similar to the existing caching used to reduced the number of `Cmd` and `Name` objects.
With the `tracemonkey.pdf` file, this patch changes the number of `Ref` objects as follows (in the default viewer):
| | Loading the first page | Loading *all* the pages |
|----------|------------------------|-------------------------|
| `master` | 332 | 3265 |
| `patch` | 163 | 996 |
The specification states that `CreationDate` is only available for
markup annotations instead of for all annotation types.
Moreover, popup annotations are not markup annotations according to the
specification, so the creation date inheritance from the parent
annotation is also removed there (note that only the modification date
is used in e.g., the viewer).
This includes the information in the core and display layers. The
date parsing logic from the document properties is rewritten according
to the specification and now includes unit tests.
Moreover, missing unit tests for the color of a popup annotation have
been added.
Finally the styling of the popup is changed slightly to make the text a
bit smaller (it's currently quite large in comparison to other viewers)
and to make the drop shadow a bit more subtle. The former is done to be
able to easily include the modification date in the popup similar to how
other viewers do this.
This way we can avoid manually building a "document id" in multiple places in `evaluator.js`, and it also let's us avoid passing in an otherwise unnecessary `PDFManager` instance when creating a `PartialEvaluator`.
Please see the specification, https://www.adobe.com/content/dam/acom/en/devnet/acrobat/pdfs/PDF32000_2008.pdf#M11.9.12864.1Heading.71.Viewer.Preferences
Furthermore, note that this patch *only* adds API support and unit-tests but does not attempt to integrate e.g. the `ViewerPreferences -> Direction` property into the viewer (which would be necessary to address issue 10736).
The reason for this is that it's not entirely clear to me exactly if/how that could be implemented; e.g. would it be as simple as setting the `dir` attribute on the `viewerContainer` DOM element, or will it be more complicated?
There's also the question of how the `ViewerPreferences -> Direction` value interacts with the `PageMode`, and this will generally require a fair bit of manual testing. Since the direction of the *entire* viewer depends on the browser locale, there's also a somewhat open question regarding what default value to use for different locales.
Finally, if the viewer supports `ViewerPreferences -> Direction` then I'm assuming that it will be necessary to allow users to override the default value, which will require (most likely) new `SecondaryToolbar` buttons and icons for those etc.
Hence this patch only lays the necessary foundation for eventually addressing issue 10736, but defers the actual implementation until later. (Time permitting, I'll try to look into the viewer part later.)
Currently if trying to set `disableRange=true` in the built-in PDF Viewer in Firefox, either through `about:config` or via the URL hash, the PDF document will never load. It appears that this has been broken for a couple of years, without anyone noticing.
Obviously it's not a good idea to set `disableRange=true`, however it seems that this bug affects the PDF Viewer in Firefox even with default settings:
- In the case where `initialData` already contains the *entire* file, we're forced to dispatch a range request to re-fetch already available data just so that file loading may complete.
- (In the case where the data arrives, via streaming, before being specifically requested through `requestDataRange`, we're also forced to re-fetch data unnecessarily.) *This part was removed, to reduce the scope/risk of the patch somewhat.*
In the cases outlined above, we're having to re-fetch already available data thus potentially delaying loading/rendering of PDF files in Firefox (and wasting resources in the process).
Support for the non-standard `moz-chunked-arraybuffer` response type is in the process of being removed from Firefox; see e.g. https://bugzilla.mozilla.org/show_bug.cgi?id=1411865
For the time being, you probably want to keep support for this in the general PDF.js library given that feature detection is used. However, removing the unit-test immediately seems reasonable, since it will otherwise start failing once the platform support for `moz-chunked-arraybuffer` is gone.
Fixes 8851; please note that if unit-tests for the code in `fetch_stream.js` are wanted, which I'm assuming they are, those should live in their own file rather than being lumped into `network_spec.js` anyway.
Moreover, group the lexer unit tests per method. This matches what we
do for other classes and makes it more easily visible which methods
we don't or insufficiently unit test.
The parser itself is not unit tested yet, so this patch provides a start
for doing so. The `inlineStreamSkipEI` method is used in other end
marker detection methods, so it's important that its functionality is
correct for proper parsing.
Note how `PDFDocumentProxy.destroy` is a nothing more than an alias for `PDFDocumentLoadingTask.destroy`. While removing the latter method would be a breaking API change, there's still room for at least some clean-up here.
The main changes in this patch are:
- Stop providing a `PDFDocumentLoadingTask` instance *separately* when creating a `PDFDocumentProxy`, since the loadingTask is already available through the `WorkerTransport` instance.
- Stop tracking the `PDFDocumentProxy` instance on the `WorkerTransport`, since that property is completely unused.
- Simplify the 'Multiple `getDocument` instances' unit-tests by only destroying *once*, rather than twice, for each document.
The `DOMCanvasFactory` class is now fully covered. Moreover, missing
cases for the `getFilenameFromUrl` function have been included.
Finally, `var` usage has been removed.
The `src/shared/util.js` file is being bundled into both the `pdf.js` and `pdf.worker.js` files, meaning that its code is by definition duplicated.
Some main-thread only utility functions have already been moved to a separate `src/display/display_utils.js` file, and this patch simply extends that concept to utility functions which are used *only* on the worker-thread.
Note in particular the `getInheritableProperty` function, which expects a `Dict` as input and thus *cannot* possibly ever be used on the main-thread.
This file (currently) contains not only DOM-specific helper functions/classes, but is used generally for various helper code relevant for main-thread functionality.
There doesn't appear to be any particular reason for only running these unit-tests in browsers, since the `PDFDataRangeTransport` functionality itself should be back-end agnostic.
This allows simplification of the 'creates pdf doc from URL and aborts loading after worker initialized' API unit-test.
Note that the `DOMFileReaderFactory` uses the Fetch API, for simplicity, since it should be available in all browsers where we're running tests.
In many cases in the code you don't actually care about the index itself, but rather just want to know if something exists in a String/Array or if a String starts in a particular way. With modern JavaScript functionality, it's thus possible to remove a number of existing `indexOf` cases.
This will allow the Metadata to be successfully extracted from the PDF file in issue 10395.
Furthermore, this patch also fixes a bug in `Metadata.get` which causes the method to return `null` rather than an empty string or zero (since either ought to be allowed).
Previously a couple of different attempts at fixing this problem has been rejected, given how *crucial* this code is for the correct function of the viewer, since no one has thus far provided any evidence that the problem actually affects the default viewer[1] nor an example using the viewer components directly (without another library on top).
The fact that none of the prior patches contained even a *simple* unit-test probably contributed to the unwillingness of a reviewer to sign off on the suggested changes.
However, it turns out that it's possible to create a reduced test-case, using the default viewer, that demonstrates the error[2]. Since this utilizes a hidden `<iframe>`, please note that this error will thus affect Firefox as well.
Note that while errors are thrown when the hidden `<iframe>` loads, the default viewer doesn't break completely since rendering does start working once the `<iframe>` becomes visible (although the errors do break the initial Toolbar state).
Before making any changes here, I carefully read through not just the immediately relevant code but also the rendering code in the viewer (given it's dependence on `getVisibleElements`). After concluding that the changes should be safe in general, the default viewer was tested without any issues found. (The above being much easier with significant prior experience of working with the viewer code.)
Finally the patch also adds new unit-tests, one of which explicitly triggers the relevant code-path and will thus fail with the current `master` branch.
This patch also makes `PDFViewerApplication` slightly more robust against errors during document opening, to ensure that viewer/document initialization always completes as expected.
Please keep in mind that even though this patch prevents an error in `getVisibleElements`, it's still not possible to set the initial position/zoom level/sidebar view etc. when the viewer is hidden since rendering and scrolling is completely dependent[3] on being able to actually access the DOM elements.
---
[1] And hence the PDF Viewer that's built-in to Firefox.
[2] Copy the HTML code below and save it as `iframe.html`, and place the file in the `web/` folder. Then start the server, with `gulp server`, and navigate to http://localhost:8888/web/iframe.html
```html
<!DOCTYPE html>
<html>
<head>
<title>Iframe test</title>
<script>
window.onload = function() {
const button = document.getElementById('button1');
const frame = document.getElementById('frame1');
button.addEventListener('click', function(evt) {
frame.hidden = !frame.hidden;
});
};
</script>
</head>
<body>
<button id="button1">Toggle iframe</button>
<br>
<iframe id="frame1" width="800" height="600" src="http://localhost:8888/web/viewer.html" hidden="true"></iframe>
</body>
</html>
```
[3] This is an old, pre-exisiting, issue that's not relevant to this patch as such (and it's already being tracked elsewhere).
The error was triggered for a particular set of metadata, where an end tag was encountered without the corresponding begin tag being present in the data.
(The patch also fixes a minor oversight, from a recent PR, in the `SimpleDOMNode.nextSibling` method.)
If, as PR 10368 suggests, more parameters should be added to `getViewport` I think that it would be a mistake to not change the signature *first* to avoid needlessly unwieldy call-sites.
To not break any existing code and third-party use-cases, this is obviously implemented with a deprecation warning *and* with a working fallback[1] for the old method signature.
---
[1] This is limited to `GENERIC` builds, which should be sufficient.
Note that the OpenAction dictionary may contain other information besides just a destination array, e.g. instructions for auto-printing[1].
Given first of all that an arbitrary `Dict` cannot be sent from the Worker (since cloning would fail), and second of all that the data obviously needs to be validated, this patch purposely only adds support for fetching a destination from the OpenAction entry[2].
---
[1] This information is, currently in PDF.js, being included through the `getJavaScript` API method.
[2] This significantly reduces the complexity of the implementation, which seems fine for now. If there's ever need for other kinds of OpenAction to be fetched, additional API methods could/should be implemented as necessary (could e.g. follow the `getOpenActionWhatever` naming scheme).
The custom entries, provided that they exist *and* that their types are safe to include, are exposed through a new `Custom` infoDict entry to clearly separate them from the standard ones.
Fixes 5970.
Fixes 10344.
Jasmine recommends to use the `configure` method on the environment
during boot. This commit makes the code correspond to how it's done in
Jasmine's default boot file. The options dropdown in the HTML reporter
now works again after these changes, because this broke in the upgrade
to Jasmine 3, and the unit tests are executed in a random order by
default, which is important to make sure the unit tests are
self-contained and don't depend on the result of another unit test.
This line in the annotation tests subtracts an array from a number. This is because `splice(-1, 1)` returns a one-element array, while `pop()` returns only the element itself.
*Please note:* I'm totally fine with this patch being rejected, and the issue closed as WONTFIX; however these changes should address the issue if that's desired.
From a conceptual point of view, reporting loading progress doesn't really make a lot of sense for PDF files opened by passing raw binary data directly to `getDocument` (since obviously *all* data was loaded).
This is compared to PDF files loaded via e.g. `XMLHttpRequest` or the Fetch API, where the entire PDF file isn't available from the start and knowing the loading progress makes total sense.
However I can certainly see why the current API could be considered inconsistent, which isn't great, since a registered `onProgress` callback will never be called for certain `getDocument` calls.
The simplest solution to this inconsistency thus seem to be to ensure that `onProgress` is always called when handling the `DataLoaded` message, since that will *always* be dispatched[1] from the worker-thread.
---
[1] Note that this isn't guaranteed to happen, since setting `disableAutoFetch = true` often prevents the *entire* file from ever loading. However, this isn't relevant for the issue at hand, and is a well-known consequence of using `disableAutoFetch = true`; note how the default viewer even has a specialized code-path for hiding the loadingBar.
*This patch is based on something that I noticed while working on PR 10126.*
The recent re-factoring of `PDFFindController` brought many improvements, among those the fact that access to `BaseViewer` is no longer required. However, with these changes there's one thing which now strikes me as not particularly user-friendly[1]: The fact that in order for searching to actually work, `PDFFindController.setDocument` must be called *and* a 'pagesinit' event must be dispatched (from somewhere).
For all other viewer components, calling the `setDocument` method[2] is enough in order for the component to actually be usable.
The `PDFFindController` thus stands out quite a bit, and it also becomes difficult to work with in any sort of custom implementation. For example: Imagine someone trying to use `PDFFindController` separately from the viewer[3], which *should* now be relatively simple given the re-factoring, and thus having to (somehow) figure out that they'll also need to manually dispatch a 'pagesinit' event for searching to work.
Note that the above even affects the unit-tests, where an out-of-place 'pagesinit' event is being used.
To attempt to address these problems, I'm thus suggesting that *only* `setDocument` should be used to indicate that searching may start. For the default viewer and/or the viewer components, `BaseViewer.setDocument` will now call `PDFFindController.setDocument` when the document is ready, thus requiring no outside configuration anymore[4]. For custom implementation, and the unit-tests, it's now as simple as just calling `PDFFindController.setDocument` to allow searching to start.
---
[1] I should have caught this during review of PR 10099, but unfortunately it's sometimes not until you actually work with the code in question that things like these become clear.
[2] Assuming, obviously, that the viewer component in question actually implements such a method :-)
[3] There's even a very recent issue, filed by someone trying to do just that.
[4] Short of providing a `PDFFindController` instance when creating a `BaseViewer` instance, of course.
This commit shows that we can now unit test the find controller and
that executing regular queries works. Note that this is only a first
step and not a complete suite of unit tests for all possible options
of the find controller.
While writing this unit test, I found two smaller issues that I
addressed directly. The first one is that in the previous find
controller refactoring I forgot to rename some occurrences of a now
private member variable. Fortunately this did not cause any bugs since
we did have a public getter and the fetched value may be changed by
reference, but it's nevertheless good to fix. The second issue is that
some entries in the `test/unit/clitests.json` file were not correct,
resulting in these tests not being executed on e.g., Travis CI.
As outlined in https://bugzilla.mozilla.org/show_bug.cgi?id=1282759 the internal Firefox name for the feature is `entireWord`, hence that name is used here as well for consistency (with "Whole words" being limited to the UI).
Given existing limitations of the PDF.js search functionality, e.g. the existing problems of searching across "new lines", there's some edge-cases where "Whole words" searching will ignore (valid) results.
However, considering that this is a pre-existing issue related to the way that the find controller joins text-content together, that shouldn't have to block this new feature in my opionion.
*Please note:* In order to enable this feature in the `MOZCENTRAL` version, a small follow-up patch for [PdfjsChromeUtils.jsm](https://hg.mozilla.org/mozilla-central/file/tip/browser/extensions/pdfjs/content/PdfjsChromeUtils.jsm) will be required once this has landed in `mozilla-central`.
There have been lots of problems with trying to map glyphs to their unicode
values. It's more reliable to just use the private use areas so the browser's
font renderer doesn't mess with the glyphs.
Using the private use area for all glyphs did highlight other issues that this
patch also had to fix:
* small private use area - Previously, only the BMP private use area was used
which can't map many glyphs. Now, the (much bigger) PUP 16 area can also be
used.
* glyph zero not shown - Browsers will not use the glyph from a font if it is
glyph id = 0. This issue was less prevalent when we mapped to unicode values
since the fallback font would be used. However, when using the private use
area, the glyph would not be drawn at all. This is illustrated in one of the
current test cases (issue #8234) where there's an "ä" glyph at position
zero. The PDF looked like it rendered correctly, but it was actually not
using the glyph from the font. To properly show the first glyph it is always
duplicated and appended to the glyphs and the maps are adjusted.
* supplementary characters - The private use area PUP 16 is 4 bytes, so
String.fromCodePoint must be used where we previously used
String.fromCharCode. This is actually an issue that should have been fixed
regardless of this patch.
* charset - Freetype fails to load fonts when the charset size doesn't match
number of glyphs in the font. We now write out a fake charset with the
correct length. This also brought up the issue that glyphs with seac/endchar
should only ever write a standard charset, but we now write a custom one.
To get around this the seac analysis is permanently enabled so those glyphs
are instead always drawn as two glyphs.
This patch is the first step to be able to eventually get rid of the `attachDOMEventsToEventBus` function, by allowing `EventBus` instances to simply re-dispatch most[1] events to the DOM.
Note that the re-dispatching is purposely implemented to occur *after* all registered `EventBus` listeners have been serviced, to prevent the ordering issues that necessitated the duplicated page/scale-change events.
The DOM events are currently necessary for the `mozilla-central` tests, see https://hg.mozilla.org/mozilla-central/file/tip/browser/extensions/pdfjs/test, and perhaps also for custom deployments of the PDF.js default viewer.
Once this have landed, and been successfully uplifted to `mozilla-central`, I intent to submit a patch to update the test-code to utilize the new preference. This will thus, eventually, make it possible to remove the `attachDOMEventsToEventBus` functionality.
*Please note:* I've successfully ran all `mozilla-central` tests locally, with these patches applied.
---
[1] The exception being events that originated on the `window` or `document`, since those are already globally available anyway.
This commit is the first step towards implementing parsing for the
appearance streams of annotations.
Co-authored-by: Jonas Jenwald <jonas.jenwald@gmail.com>
Co-authored-by: Tim van der Meij <timvandermeij@gmail.com>
The font tests use Jasmine too, so while they are technically unit
tests, it's a bit confusing to see `Started unit tests` when the font
tests are run on the bots.
This should really have been included in PR 9868, since it will help ensure that the `URL` constructor is correctly imported/exported by `src/shared/util.js`.
There was a (somewhat) recent question on IRC about accessing the linearization status of a PDF document, and this patch contains a simple way to expose that through already existing API methods.
Please note that during setup/parsing in `PDFDocument` the linearization data is already being fetched and parsed, provided of course that it exists. Hence this patch will *not* cause any additional data to be loaded.
With the new XML parser, see PR 9573, the referenced PDF file now causes `getMetadata` to fail when incomplete XML tags are encountered. This provides a simple, and hopefully generally useful, work-around that may also help prevent future bugs.
(Without being able to reproduce nor even understand the other (non XML) errors mentioned in issue 8884, I'd say that this patch is enough to close that one as fixed.)
Currently if `RenderTask.cancel` is called *immediately* after rendering was started, then by the time that `InternalRenderTask.initializeGraphics` is called rendering will already have been cancelled.
However, we're still inserting the canvas into the `canvasInRendering` map, thus breaking any future attempts at re-rendering using the same canvas. Considering that `InternalRenderTask.cancel` always removes the canvas from the map, I cannot imagine that we'd ever want to re-add it *after* rendering was cancelled (it was likely just a simple oversight in PR 8519).
Fixes 9456.
This wasn't included in PR 9245, since all the API options were still global at that time.
Writing the unit-tests also uncovered an issue with `getOperatorList` not starting the "Page Request" timer.
Incomplete path operators, in particular, can result in fairly chaotic rendering artifacts, as can be observed on page four of the referenced PDF file.
The initial (naive) solution that was attempted, was to simply throw a `FormatError` as soon as any invalid (i.e. too short) operator was found and rely on the existing `ignoreErrors` code-paths. However, doing so would have caused regressions in some files; see the existing `issue2391-1` test-case, which was promoted to an `eq` test to help prevent future bugs.
Hence this patch, which adds special handling for invalid path operators since those may cause quite bad rendering artifacts.
You could, in all fairness, argue that the patch is a handwavy solution and I wouldn't object. However, given that this only concerns *corrupt* PDF files, the way that PDF viewers (PDF.js included) try to gracefully deal with those could probably be described as a best-effort solution anyway.
This patch also adjusts the existing `warn`/`info` messages to print the command name according to the PDF specification, rather than an internal PDF.js enumeration value. The former should be much more useful for debugging purposes.
Fixes https://bugzilla.mozilla.org/show_bug.cgi?id=1443140.
With the current code line-breaks are accepted not just after an operator, but after a decimal point as well. When looking at this again, the latter case seems prone to cause false positives and might also interfere with subsequent patches.
Hence this is code is adjusted to actually do what the original commit message says, and nothing more.
The built-in image decoders are already using `Uint8ClampedArray` when returning data, and this patch simply extends that to the rest of the image/colorspace code.
As far as I can tell, the only reason for using manual clamping/rounding in the first place was because TypedArrays used to be polyfilled (using regular arrays). And trying to polyfill the native clamping/rounding would probably have been had too much overhead, but given that TypedArray support is required in PDF.js version `2.0` that's no longer a concern.
*Please note:* Because of different rounding behaviour, basically `Math.round` in `Uint8ClampedArray` respectively `Math.floor` in the old code, there will be very slight movement in quite a few existing test-cases. However, the changes should be imperceivable to the naked eye, given that the absolute difference is *at most* `1` for each RGB component when comparing `master` and this patch (see also the updated expectation values in the unit-tests).
The built-in image decoders are already returning data as `Uint8ClampedArray`, and subsequently the JPEG/JBIG2/JPX streams are as well. However, for general streams we obviously don't want to force the use of `Uint8ClampedArray` unless an "Image" is actually being decoded.
Hence this patch, which adds a parameter that allows the caller of the `getBytes`/`peekBytes` methods to force a `Uint8ClampedArray` (rather than a `Uint8Array`) to be returned.
The various classes have `this._errored` and `this._reason` properties, where the first one is a boolean indicating if an error was encountered and the second one contains the actual `Error` (or `null` initially).
In practice this means that errors are basically tracked *twice*, rather than just once. This kind of double-bookkeeping is generally a bad idea, since it's quite easy for the properties to (accidentally) get into an inconsistent state whenever the relevant code is modified.
Rather than using a separate boolean, we can just as well check the "error" property directly (since `null` is falsy).
---
Somewhat unrelated to this patch, but `src/display/node_stream.js` is currently *not* handling errors in a consistent or even correct way; compared with `src/display/network.js` and `src/display/fetch_stream.js`.
Obviously using the `createResponseStatusError` utility function, from `src/display/network_utils.js`, might not make much sense in a Node.js environment. However at the *very* least it seems that `MissingPDFException`, or `UnknownErrorException` when one cannot tell that the PDF file is "missing", should be manually thrown.
As is, the API (i.e. `getDocument`) is not returning the *expected* errors when loading fails in Node.js environments (as evident from the `pending` API unit-test).
There's no good reason, as far as I can tell, to duplicate the functionality of the `LoopbackPort` in the unit-tests. The only difference between the implementations is that `LoopbackPort` mimics the (native) structured cloning, however that shouldn't matter here since the tests are only sending "simple" data (strings respectively arrays with numbers).
Furthermore the patch also changes `LoopbackPort` to default to using "structured cloning" and deferred invocation of the listeners, since native typed array support is now a requirement for using the PDF.js library.
The `MessageHandler` itself, and its assorted helper functions, are currently the single largest[1] piece of code in the `src/shared/util.js` file. By moving this code into its own file, `src/shared/util.js` thus becomes smaller and more manageable.
Compared to running the unit-tests in "regular" browsers, where any console output won't get mixed up with test output, in Node.js/Travis the test output looks quite noisy.
By ignoring `info`/`warn` calls, when running unit-tests in Node.js/Travis, the test output is a lot smaller not to mention that any *actual* failures are more easily spotted.
A couple of basic unit-tests are added, and a manual `isLandscape` check (in `web/base_viewer.js`) is also converted to use the helper function instead.
Jasmine had a major version bump and required a few minor changes in our
booting code. Most notably, using `pending` in a `describe` block is no
longer supported, so we can only return early there. On the positive
side, the unit tests now run in a random order by default, which
eliminates any dependencies between unit tests.
Note that upgrading to Webpack 4 is out of scope for this patch since
the bots cannot work well with the newly generated bundles (both
browsers on both bots do not react within 120 seconds). Webpack 4 is not
faster for us than Webpack 3, so for now there is no need to upgrade.
The `getPageSizeInches` method was implemented on `PDFDocumentProxy`, which seems conceptually wrong since the size property isn't global to the document but rather specific to each page. Hence the method is moved into `PDFPageProxy`, as `get pageSizeInches` instead to address this.
Despite the fact that new API functionality was implemented, no unit-tests were added. To prevent issues later on, we should *always* ensure that new functionality has at least some test-coverage; something that this patch also takes care of.
The new `PDFDocumentProperties._parsePageSize` method seemed unnecessary convoluted. Furthermore, in the "no data provided"-case it even returned incorrect data (an array, rather than the expected object).
Finally, the fallback strings didn't actually agree with the `en-US` locale. This inconsistency doesn't look too great, and it's thus addressed here as well.
This function combines the logic of two separate methods into one.
The loop limit is also a good thing to have for the calls in
`src/core/annotation.js`.
Moreover, since this is important functionality, a set of unit tests and
documentation is added.
With PDF.js version `2.0` we'll only support browsers with built-in `TypedArray` functionality, hence there doesn't seem to be any good reason not to implement this now.
Fixes 4888.
This removes the `PDFJS.externalLinkTarget`/`PDFJS.externalLinkRel` dependency from the viewer components, but please note that as a *temporary* solution the default viewer still uses it.
Despite this patch removing the `disableWorker` option itself, please note that we'll still fallback to loading the worker file(s) on the main-thread when running in environments without proper Web Worker support.
Furthermore it's still possible, even with this patch, to force the use of fake workers by manually loading the necessary file using a `<script>` tag on the main-thread.[1]
That way, the functionality of the now removed `SINGLE_FILE` build target and the resulting `build/pdf.combined.js` file can still be achieved simply by adding e.g. `<script src="build/pdf.worker.js"></script>` to the HTML (obviously with the path adjusted as needed).
Finally note that the `disableWorker` option is a performance footgun, and unfortunately many existing third-party examples actually use it without providing any sort of warning/justification.
---
[1] This approach is used in the default viewer, since certain kind of debugging may be easier if the code is running directly on the main-thread.
This method returns the currently used `workerSrc`, which thus allows obtaining the fallback `workerSrc` value (e.g. when the option wasn't set by the user).
Remove "returns null when content disposition is form-data".
The name of the test is already misleading: It suggests that
the return value is null if the Content-Disposition starts with
"form-data". This is not the case, anything with the "filename"
parameter is accepted.
So, to correct this, one would have to rephrase the test description to
"returns null when content disposition has no filename".
But this is already tested by the test called
"gets the filename from the response header".
So, remove the test.
This patch updates the `IPDFStreamReader` interface and ensures that the interface/implementation of `network.js`, `fetch_stream.js`, `node_stream.js`, and `transport_stream.js` all match properly.
The unit-tests are also adjusted, to more closely replicate the actual behaviour of the various actual `IPDFStreamReader` implementations.
Finally, this patch adjusts the use of the Content-Disposition filename when setting the title in the viewer, and adds `PDFDocumentProperties` support as well.
The `fetch` API is only supported for http(s), even in Chrome extensions.
Because of this limitation, we should use the XMLHttpRequest API when the
requested URL is not a http(s) URL.
Fixes#9361
These were removed in PR 9170, since they were unused in the browsers that we'll support in PDF.js version `2.0`.
However looking at the output of Travis, where a subset of the unit-tests are run using Node.js, there's warnings about `btoa` being undefined. This doesn't appear to cause any errors, which probably explains why we didn't notice this before (despite PR 9201).
Since multiple empty lines is virtually unused in the code-base, and the few cases that do exist look like "typos", let's enforce greater consistency here; please see https://eslint.org/docs/rules/no-multiple-empty-lines.
Initially I just implemented the unit tests, but quickly found that they
were failing my expectation of having a size of 256 items. Some of them
did contain 256 items and some did not. I looked up various resources
and figured that they indeed all need to have 256 items. One of the good
resources is https://github.com/davidben/poppler/blob/master/poppler/FontEncodingTables.cc
Aside from some missing `notdef` (empty string) entries at the end of
the arrays, which I assume causes issues since it may cause
out-of-bounds array access which in JavaScript gives `undefined`, there
was a `notdef` entry missing in the `MacExpertEncoding`, causing the
entries after that to be shifted. This fix for this is similar to the
one in #8589.
The unit tests verify that, for known encoding names, the return value
is not only an array, but that it is also of the right length and
contains only strings.
Please note that while this could be considered a regression in user-facing behaviour, I'm not convinced that it's really a regression as such since prior to PR 8912 the Metadata would fail to parse (with an XML error) and thus be ignored when setting the viewer title.
With the refactored Metadata parsing we're now able to parse this, which uncovered issues with a subset of broken Ghostscript Metadata that uses HTML character names.
Fixes https://bugzilla.mozilla.org/show_bug.cgi?id=1424938
It is quite confusing that the custom function is called `log2` while it
actually returns the ceiling value and handles zero and negative values
differently than the native function.
To resolve this, we add a comment that explains these differences and
make the function use the native `Math` functions internally instead of
using our own custom logic. To verify that the function does what we
expect, we add unit tests.
All browsers except for IE support `Math.log2` for quite a long time
already (see https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Math/log2).
For IE, we use the core-js polyfill.
According to the microbenchmark at https://jsperf.com/log2-pdfjs/1,
using the native functions should also be faster, in my testing almost
six times as fast.
*This patch is the result of me starting to look into moving parameters from `PDFJS` into `getDocument` and other API methods.*
When familiarizing myself with the code, the signatures of the various network streams seemed to be unnecessarily cumbersome since `disableRange` is currently handled separately from other parameters.
I'm assuming that the explanation for this is probably "for historical reasons", as is often the case. Hence I'd like to clean this up *before* we start the larger, and more invasive, `PDFJS` parameter re-factoring.
Nothing uses this option anymore, so setting it is a no-op now. We can
safely remove it.
Use `SKIP_BABEL` (instead of `PDFJS_NEXT`) now if you want to skip Babel
translation for a build.
This patch makes use of the existing `ignoreErrors` property in `src/core/evaluator.js`, see PRs 8240 and 8441, thus allowing us to attempt to recovery as much as possible of a page even when it contains broken XObjects.
Fixes 8702.
Fixes 8704.
*Follow-up to PR 8909.*
This requires us to pass around `pdfFunctionFactory` to quite a lot of existing code, however I don't see another way of handling this while still guaranteeing that we can access `PDFFunction` as freely as in the old code.
Please note that the patch passes all tests locally (unit, font, reference), and I *very* much hope that we have sufficient test-coverage for the code in question to catch any typos/mistakes in the re-factoring.
The `DOMParser` is most likely overkill and may be less secure.
Moreover, it is not supported in Node.js environments.
This patch replaces the `DOMParser` with a simple XML parser. This
should be faster and gives us Node.js support for free. The simple XML
parser is a port of the one that existed in the examples folder with a
small regex fix to make the parsing work correctly.
The unit tests are extended for increased test coverage of the metadata
code. The new method `getAll` is provided so the example does not have
to access internal properties of the object anymore.
This patch provides a new unit tested factory for creating SVG
containers and elements. This code is duplicated twice in the
codebase, but with upcoming changes this would need to be duplicated
even more. Moreover, consolidating this code in one factory allows
us to replace it easily for e.g., supporting Node.js. Therefore, move
this to a central place and update/ES6-ify the related code.
Finally, we replace `setAttributeNS` with `setAttribute` because no
namespace is provided.
This changes both `PDFViewer` and `PDFThumbnailViewer` to return early in the `pagesRotation` setters if the rotation doesn't change.
It also fixes an existing issue, in `PDFViewer`, that would cause errors if the rotation changes *before* the scale has been set to a non-default value.
Finally, in preparation for subsequent patches, it also refactors the rotation code in `web/app.js` to update the thumbnails and trigger rendering with the new `rotationchanging` event.
According to the specification, see http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/PDF32000_2008.pdf#page=377, a `Dest` entry in an outline item should *not* contain a dictionary.
Unsurprisingly there's PDF generators that completely ignore this, treating is an `A` entry instead.
The patch also adds a little bit more validation code in `Catalog.parseDestDictionary`.
When running browser tests, e.g. via `gulp unittest`, the test files are not
processed by babel, and neither by the "unittestcli" gulp target.
This commit copies the babelPluginReplaceNonWebPackRequire plugin from the
unittestcli target to the SystemJS config so that `__non_webpack_require__` is
replaced with `require` for all build targets, and adds a unit test to ensure
that this indeed works as expected.
