When the old `Dict.getAll()` method was removed, it was replaced with a `Dict.getKeys()` call and `Dict.get(...)` calls (in a loop).
While this pattern obviously makes a lot of sense in many cases, there's some instances where we actually want the *raw* `Dict` values (i.e. `Ref`s where applicable). In those cases, `Dict.getRaw(...)` calls are instead used within the loop. However, by introducing a new `Dict.getRawValues()` method we can reduce the number of (strictly unnecessary) function calls by simply getting the *raw* `Dict` values directly.
This patch will help pathological cases the most, with issue 2813 being a particularily problematic example. While there's only *four* `/ExtGState` resources, there's a total `29062` of `setGState` operators. Even though parsing of a single `/ExtGState` resource is quite fast, having to re-parse them thousands of times does add up quite significantly.
For simplicity we'll only cache "simple" `/ExtGState` resource, since e.g. the general `SMask` case cannot be easily cached (without re-factoring other code, which may have undesirable effects on general parsing).
By caching "simple" `/ExtGState` resource, we thus improve performance by:
- Not having to fetch/validate/parse the same `/ExtGState` data over and over.
- Handling of repeated `setGState` operators becomes *synchronous* during the `OperatorList` building, instead of having to defer to the event-loop/microtask-queue since the `/ExtGState` parsing is done asynchronously.
---
Obviously I had intended to include (standard) benchmark results with this patch, but for reasons I don't understand the test run-time (even with `master`) of the document in issue 2813 is *a lot* slower than in the development viewer (making normal benchmarking infeasible).
However, testing this manually in the development viewer (using `pdfBug=Stats`) shows a *reduction* of `~10 %` in the rendering time of the PDF document in issue 2813.
Originally there weren't any (generally) good ways to handle errors gracefully, on the worker-side, however that's no longer the case and we can simply fallback to the existing `ignoreErrors` functionality instead.
Also, please note that the "no `/XObject` found"-scenario should be *extremely* unlikely in practice and would only occur in corrupt/broken documents.
Note that the `PartialEvaluator.getOperatorList` case is especially bad currently, since we'll simply (attempt to) send the data as-is to the main-thread. This is quite bad, since in a corrupt/broken document the data *could* contain anything and e.g. be unclonable (which would cause breaking errors).
Also, we're (obviously) not attempting to do anything with this "raw" `OPS.paintXObject` data on the main-thread and simply ensuring that we never send it definately seems like the correct approach.
This special-case was added in PR 1992, however it became unnecessary with the changes in PR 4824 since all of the ColorSpace parsing is now done on the worker-thread (with only RGB-data being sent to the main-thread).
Note how the `getFontID`-method in `src/core/fonts.js` is *completely* global, rather than properly tied to the current document. This means that if you repeatedly open and parse/render, and then close, even the *same* PDF document the `fontID`s will still be incremented continuously.
For comparison the `createObjId` method, on `idFactory`, will always create a *consistent* id, assuming of course that the document and its pages are parsed/rendered in the same order.
In order to address this inconsistency, it thus seems reasonable to add a new `createFontId` method on the `idFactory` and use that when obtaining `fontID`s. (When the current `getFontID` method was added the `idFactory` didn't actually exist yet, which explains why the code looks the way it does.)
*Please note:* Since the document id is (still) part of the `loadedName`, it's thus not possible for different documents to have identical font names.
This moves, and slightly simplifies, code that's currently residing in the unit-test utils into the actual library, such that it's bundled with `GENERIC`-builds and used in e.g. the API-code.
As an added bonus, this also brings out-of-the-box support for CMaps in e.g. the Node.js examples.
The default viewer, and thus Firefox, depends on the `RenderTask.onContinue` functionality to pause/continue rendering (such that the most visible page always renders first).
Despite this functionality thus being very important, it has however never actually been tested *at all* as far as I can tell. Hence this patch which adds a new boolean `renderTaskOnContinue` parameter (`false` by default), that can be used to force a reference-test to use the `RenderTask.onContinue` code-path in the `InternalRenderTask` class.
Note that I purposely made this new reference-test behaviour *optional*, since I didn't want to negatively affect the general runtime of the tests (given that there's a slight delay added to the rendering). Also, for e.g. benchmarking you'd most likely want to stay away from the `RenderTask.onContinue` functionality for similar reasons.
This should reduce the possibility of accidentally truncating some inline images, while *not* causing the "EI" detection to become significantly slower.[1]
There's obviously a possibility that these added checks are not sufficient to catch *every* single case of "EI" sequences within the actual inline image data, but without specific test-cases I decided against over-engineering the solution here.
*Please note:* The interpolation issues are somewhat orthogonal to the main issue here, which is the truncated image, and it's already tracked elsewhere.
---
[1] I've looked at the issue a few times, and this is the first approach that I was able to come up with that didn't cause *unacceptable* performance regressions in e.g. issue 2618.
This patch contains the following *notable* improvements:
- Changes the `ColorSpace.parse` call-sites to, where possible, pass in a reference rather than actual ColorSpace data (necessary for the next point).
- Adds (local) caching of `ColorSpace`s by `Ref`, when applicable, in addition the caching by name. This (generally) improves `ColorSpace` caching for e.g. the SMask code-paths.
- Extends the (local) `ColorSpace` caching to also apply when handling Images and Patterns, thus further reducing unneeded re-parsing.
- Adds a new `ColorSpace.parseAsync` method, almost identical to the existing `ColorSpace.parse` one, but returning a Promise instead (this simplifies some code in the `PartialEvaluator`).
*First of all, I should mention that my understanding of the finer details of the `QueueOptimizer` (and its related `CanvasGraphics` methods) is somewhat limited.*
Hence I'm not sure if there's actually a very good reason for *only* considering ImageMasks where the "skew" transformation matrix elements are zero as *repeated*, however simply looking at the code I just don't see why these elements cannot be non-zero as long as they are *all identical* for the ImageMasks.
Furthermore, looking at the *group* case (which is what we're currently falling back to), there's no particular limitation placed upon the transformation matrix elements.
While this patch obviously isn't enough to *completely* fix the issue, since there should be a visible Pattern rendered as well[1], it seem (at least to me) like enough of an improvement that submitting this is justified.
With these changes the referenced PDF document will no longer hang the *entire* browser, and rendering also finishes in a *reasonable* time (< 10 seconds for me) which seem fine given the *huge* number of identical inline images present.[2]
---
[1] Temporarily changing the Pattern to a solid color *does* render the correct/expected area, which suggests that the remaining problem is a pre-existing issue related to the Pattern-handling itself rather than the `QueueOptimizer` functionality.
[2] The document isn't exactly rendered immediately in e.g. Adobe Reader either.
Because of a really stupid `Promise`-related mistake on my part, when re-factoring `PDFImage.buildImage` during the `NativeImageDecoder` removal, we're no longer re-throwing errors occuring during image parsing/decoding as intended.
The result is that some (fairly) corrupt documents will never finish loading, and unfortunately there were apparently no sufficiently corrupt images in the test-suite to catch this.
Since this helper function is no longer used anywhere in the main code-base, but only in a couple of unit-tests, it's thus being moved to a more appropriate spot.
Finally, the implementation of `isEmptyObj` is also tweaked slightly by removing the manual loop.
On ISO/IEC 10918-6:2013 (E), section 6.1: (http://www.itu.int/rec/T-REC-T.872-201206-I/en)
"Images encoded with three components are assumed to be RGB data encoded as YCbCr unless the image contains an APP14 marker segment as specified in 6.5.3, in which case the colour encoding is considered either RGB or YCbCr according to the application data of the APP14 marker segment"
But common jpeg libraries consider RGB too if components index are ASCII R (0x52), G (0x47) and B (0x42): https://stackoverflow.com/questions/50798014/determining-color-space-for-jpeg/50861048
Issue #11931
Currently some JPEG images are decoded by the built-in PDF.js decoder in `src/core/jpg.js`, while others attempt to use the browser JPEG decoder. This inconsistency seem unfortunate for a number of reasons:
- It adds, compared to the other image formats supported in the PDF specification, a fair amount of code/complexity to the image handling in the PDF.js library.
- The PDF specification support JPEG images with features, e.g. certain ColorSpaces, that browsers are unable to decode natively. Hence, determining if a JPEG image is possible to decode natively in the browser require a non-trivial amount of parsing. In particular, we're parsing (part of) the raw JPEG data to extract certain marker data and we also need to parse the ColorSpace for the JPEG image.
- While some JPEG images may, for all intents and purposes, appear to be natively supported there's still cases where the browser may fail to decode some JPEG images. In order to support those cases, we've had to implement a fallback to the PDF.js JPEG decoder if there's any issues during the native decoding. This also means that it's no longer possible to simply send the JPEG image to the main-thread and continue parsing, but you now need to actually wait for the main-thread to indicate success/failure first.
In practice this means that there's a code-path where the worker-thread is forced to wait for the main-thread, while the reverse should *always* be the case.
- The native decoding, for anything except the *simplest* of JPEG images, result in increased peak memory usage because there's a handful of short-lived copies of the JPEG data (see PR 11707).
Furthermore this also leads to data being *parsed* on the main-thread, rather than the worker-thread, which you usually want to avoid for e.g. performance and UI-reponsiveness reasons.
- Not all environments, e.g. Node.js, fully support native JPEG decoding. This has, historically, lead to some issues and support requests.
- Different browsers may use different JPEG decoders, possibly leading to images being rendered slightly differently depending on the platform/browser where the PDF.js library is used.
Originally the implementation in `src/core/jpg.js` were unable to handle all of the JPEG images in the test-suite, but over the last couple of years I've fixed (hopefully) all of those issues.
At this point in time, there's two kinds of failure with this patch:
- Changes which are basically imperceivable to the naked eye, where some pixels in the images are essentially off-by-one (in all components), which could probably be attributed to things such as different rounding behaviour in the browser/PDF.js JPEG decoder.
This type of "failure" accounts for the *vast* majority of the total number of changes in the reference tests.
- Changes where the JPEG images now looks *ever so slightly* blurrier than with the native browser decoder. For quite some time I've just assumed that this pointed to a general deficiency in the `src/core/jpg.js` implementation, however I've discovered when comparing two viewers side-by-side that the differences vanish at higher zoom levels (usually around 200% is enough).
Basically if you disable [this downscaling in canvas.js](8fb82e939c/src/display/canvas.js (L2356-L2395)), which is what happens when zooming in, the differences simply vanish!
Hence I'm pretty satisfied that there's no significant problems with the `src/core/jpg.js` implementation, and the problems are rather tied to the general quality of the downscaling algorithm used. It could even be seen as a positive that *all* images now share the same downscaling behaviour, since this actually fixes one old bug; see issue 7041.
Currently image resources, as opposed to e.g. font resources, are handled exclusively on a page-specific basis. Generally speaking this makes sense, since pages are separate from each other, however there's PDF documents where many (or even all) pages actually references exactly the same image resources (through the XRef table). Hence, in some cases, we're decoding the *same* images over and over for every page which is obviously slow and wasting both CPU and memory resources better used elsewhere.[1]
Obviously we cannot simply treat all image resources as-if they're used throughout the entire PDF document, since that would end up increasing memory usage too much.[2]
However, by introducing a `GlobalImageCache` in the worker we can track image resources that appear on more than one page. Hence we can switch image resources from being page-specific to being document-specific, once the image resource has been seen on more than a certain number of pages.
In many cases, such as e.g. the referenced issue, this patch will thus lead to reduced memory usage for image resources. Scrolling through all pages of the document, there's now only a few main-thread copies of the same image data, as opposed to one for each rendered page (i.e. there could theoretically be *twenty* copies of the image data).
While this obviously benefit both CPU and memory usage in this case, for *very* large image data this patch *may* possibly increase persistent main-thread memory usage a tiny bit. Thus to avoid negatively affecting memory usage too much in general, particularly on the main-thread, the `GlobalImageCache` will *only* cache a certain number of image resources at the document level and simply fallback to the default behaviour.
Unfortunately the asynchronous nature of the code, with ranged/streamed loading of data, actually makes all of this much more complicated than if all data could be assumed to be immediately available.[3]
*Please note:* The patch will lead to *small* movement in some existing test-cases, since we're now using the built-in PDF.js JPEG decoder more. This was done in order to simplify the overall implementation, especially on the main-thread, by limiting it to only the `OPS.paintImageXObject` operator.
---
[1] There's e.g. PDF documents that use the same image as background on all pages.
[2] Given that data stored in the `commonObjs`, on the main-thread, are only cleared manually through `PDFDocumentProxy.cleanup`. This as opposed to data stored in the `objs` of each page, which is automatically removed when the page is cleaned-up e.g. by being evicted from the cache in the default viewer.
[3] If the latter case were true, we could simply check for repeat images *before* parsing started and thus avoid handling *any* duplicate image resources.
Having `assert` calls without a message string isn't very helpful when debugging, and it turns out that it's easy enough to make use of ESLint to enforce better `assert` call-sites.
In a couple of cases the `assert` calls were changed to "regular" throwing of errors instead, since that seemed more appropriate.
Please find additional details about the ESLint rule at https://eslint.org/docs/rules/no-restricted-syntax
This should ensure that a page will always render successfully, even if there's errors during the Annotation fetching/parsing.
Additionally the `OperatorList.addOpList` method is also adjusted to ignore invalid data, to make it slightly more robust.
To save time or resources during development it can be useful to run
tests only in Firefox. Previously this could be done by editing the
browser manifest file, but since that file is no longer used for
Puppeteer, this command line flag replaces it. For example, executing
`gulp unittest --noChrome` will only run the unit tests in Firefox.
This commit replaces our own infrastructure for handling browsers during
tests with Puppeteer. Using our own infrastructure for this had a few
downsides:
- It has proven to not always be reliable, especially when closing the
browser, causing failures on the bots because browsers were still
running even though they should have been stopped. Puppeteer should do
a better job with this because it uses the browser's test built-in
instrumentation tools for this (the devtools protocol) which our code
didn't. This also means that we don't have to pass
parameters/preferences to tweak browser behavior anymore.
- It requires the browsers under test to be installed on the system,
whereas Puppeteer downloads the browsers before the test. This means
that setup is much easier (no more manual installations and browser
manifest files) as well as testing with different browser versions
(since they can be provisioned on demand). Moreover, this ensures that
contributors always run the tests in both Firefox and Chrome,
regardless of which browsers they have installed locally.
- It's all code we have to maintain, so Puppeteer abstracts away how the
browsers start/stop for us so we don't have to keep that code.
By default, Puppeteer only installs one browser during installation,
hence the need for a post-install script to install the second browser.
This requires `cross-env` to make passing the environment variable work
on both Linux and Windows.
The other testing code already uses the name of the browser as the
unique identifier, so I don't see a good reason to not use that for
identifying browsers to quit as well. Doing so simplifies the (already
somewhat complex) testing logic and ensures that we can use existing
functionality (such as the `getSession` function) to retrieve sessions.
As evident from the code, `PageViewport` only supports[1] `rotation` values which are a multiple of 90 degrees. Besides it being somewhat difficult to imagine meaningful use-cases for a non-multiple of 90 degrees `rotation`, the code also becomes both simpler and more efficient by not having to consider arbitrary `rotation` values.
However, any invalid rotation will *silently* fallback to assume zero `rotation` which probably isn't great for e.g. `PDFPageProxy.getViewport` in the API. Hence this patch, which will now enforce that only valid `rotation` values are accepted.
---
[1] As far as I can tell, from looking through the history, nothing else has ever been supported either.
*Please note:* These changes were done automatically, using the `gulp lint --fix` command.
This rule is already enabled in mozilla-central, see https://searchfox.org/mozilla-central/rev/567b68b8ff4b6d607ba34a6f1926873d21a7b4d7/tools/lint/eslint/eslint-plugin-mozilla/lib/configs/recommended.js#103-104
The main advantage, besides improved consistency, of this rule is that it reduces the size of the code (by 3 bytes for each case). In the PDF.js code-base there's close to 8000 instances being fixed by the `dot-notation` ESLint rule, which end up reducing the size of even the *built* files significantly; the total size of the `gulp mozcentral` build target changes from `3 247 456` to `3 224 278` bytes, which is a *reduction* of `23 178` bytes (or ~0.7%) for a completely mechanical change.
A large number of these changes affect the (large) lookup tables used on the worker-thread, but given that they are still initialized lazily I don't *think* that the new formatting this patch introduces should undo any of the improvements from PR 6915.
Please find additional details about the ESLint rule at https://eslint.org/docs/rules/dot-notation
- Add a reduced test-case for issue 11768, to prevent future regressions.
(Given that PR 11769 is only a work-around, rather than a proper solution, it may not be entirely accurate for the issue to be closed as fixed.)
- Add more validation of the charCode, as found by the heuristics, in `PartialEvaluator._buildSimpleFontToUnicode` to prevent future issues.
This patch fixes yet another instalment in the never-ending series of "what the *bleep* was I thinking", by changing the `PDFDocumentProxy.getViewerPreferences` method to return `null` by default.
Not only is this method now consistent with many other API methods, for the data not present case, but it also avoids having to e.g. loop through an object to check if it's actually empty (note the old unit-test).
Please note that these changes were done automatically, using `gulp lint --fix`.
Given that the major version number was increased, there's a fair number of (primarily whitespace) changes; please see https://prettier.io/blog/2020/03/21/2.0.0.html
In order to reduce the size of these changes somewhat, this patch maintains the old "arrowParens" style for now (once mozilla-central updates Prettier we can simply choose the same formatting, assuming it will differ here).
At this point in time, compared to when the "ignore single-char" code was added, we *should* generally be doing a much better job of combining text into as few chunks as possible.
However, there's still bad cases where we're not able to combine text as much as one would like, which is why I'm *not* proposing to simply measure/scale all text. Instead this patch will to only measure/scale single-char text in cases where the horizontal/vertical scale is off significantly, since that's were you'd expect bad text-selection behaviour otherwise.
Note that most of the movement caused by this patch is with Type3 fonts, which is a somewhat special font type and one where our current text-selection behaviour is probably the least good.
With two kind of builds now being produced, with/without translation/polyfills, it's unfortunately somewhat easy for users to accidentally pick the wrong one.
In the case where a user would attempt to use a modern build of PDF.js in an older browser, such as e.g. IE11, the failure would be immediate when the code is loaded (given the use of unsupported ECMAScript features).
However in some browsers/environments, in particular Node.js, a modern PDF.js build may load correctly and thus *appear* to function, only to fail for e.g. certain API calls. To hopefully lessen the support burden, and to try and improve things overall, this patch adds checks to ensure that a modern build of PDF.js cannot be used in browsers/environments which lack native support for critical functionality (such as e.g. `ReadableStream`). Hence we'll fail early, with an error message telling users to pick an ES5-compatible build instead.
To ensure that we actually test things better especially w.r.t. usage of the PDF.js library in Node.js environments, the `gulp npm-test` task as used by Node.js/Travis was changed (back) to test an ES5-compatible build.
(Since the bots still test the code as-is, without transpilation/polyfills, this shouldn't really be a problem as far as I can tell.)
As part of these changes there's now both `gulp lib` and `gulp lib-es5` build targets, similar to e.g. the generic builds, which thanks to some re-factoring only required adding a small amount of code.
*Please note:* While it's probably too early to tell if this will be a widespread issue, it's possible that this is the sort of patch that *may* warrant being `git cherry-pick`ed onto the current beta version (v2.4.456).
This functionality was only added to the default viewer for backwards compatibility and to support the various PDF viewer tests in mozilla-central, with the intention to eventually remove it completely.
While the different mozilla-central tests cannot be *easily* converted from DOM events, it's however possible to limit that functionality to only MOZCENTRAL builds *and* when tests are running.
Rather than depending of the re-dispatching of internal events to the DOM, the default viewer can instead be used in e.g. the following way:
```javascript
document.addEventListener("webviewerloaded", function() {
PDFViewerApplication.initializedPromise.then(function() {
// The viewer has now been initialized, and its properties can be accessed.
PDFViewerApplication.eventBus.on("pagerendered", function(event) {
console.log("Has rendered page number: " + event.pageNumber);
});
});
});
```
This looks entirely like something which was left-over from debugging, and that line hasn't been touched since PR 4515, especially considering that the corresponding branch in `FirefoxBrowser` doesn't print anything.
Given the way that "classes" were previously implemented in PDF.js, using regular functions and closures, there's a fair number of false positives when the `no-shadow` ESLint rule was enabled.
Note that while *some* of these `eslint-disable` statements can be removed if/when the relevant code is converted to proper `class`es, we'll probably never be able to get rid of all of them given our naming/coding conventions (however I don't really see this being a problem).
This rule is *not* currently enabled in mozilla-central, but it appears commented out[1] in the ESLint definition file; see https://searchfox.org/mozilla-central/rev/c80fa7258c935223fe319c5345b58eae85d4c6ae/tools/lint/eslint/eslint-plugin-mozilla/lib/configs/recommended.js#238-239
Unfortunately this rule is, for fairly obvious reasons, impossible to `--fix` automatically (even partially) and each case thus required careful manual analysis.
Hence this ESLint rule is, by some margin, probably the most difficult one that we've enabled thus far. However, using this rule does seem like a good idea in general since allowing variable shadowing could lead to subtle (and difficult to find) bugs or at the very least confusing code.
Please find additional details about the ESLint rule at https://eslint.org/docs/rules/no-shadow
---
[1] Most likely, a very large number of lint errors have prevented this rule from being enabled thus far.
Fixes#11718 in which the `ff` ligature glyph is at index zero in a CFF font. Beacuse this is a CIDFont, glyph names are CIDs, which are integers. Thus the string `".notdef"` is not correct. The rest of the charset data is already parsed correctly as integers when the boolean argument `cid` is true.
*This is part of a series of patches that will try to split PR 11566 into smaller chunks, to make reviewing more feasible.*
Once all the code has been fixed, we'll be able to eventually enable the ESLint no-shadow rule; see https://eslint.org/docs/rules/no-shadow
This property has never been documented and/or *intentionally* exposed through the API, instead the `PDFPageProxy.pageNumber` property is the documented/intended API to use here.
Hence pageIndex is changed to a "private" property on `PDFPageProxy` instances, and internal API functionality is also updated to *consistently* use `this._pageIndex` rather than a mix of formats.
Don't accidentally accept invalid glyphNames which *appear* to follow the Cdd{d}/cdd{d} format in `PartialEvaluator._buildSimpleFontToUnicode` (issue 11697)
The /Differences array of the problematic font contains a `/c.1` entry, which is consequently detected as a *possible* Cdd{d}/cdd{d} glyphName by the existing heuristics.
Because of how the base 10 conversion is implemented, which is necessary for the base 16 special case, the parsed charCode becomes `0.1` thus causing `String.fromCodePoint` to throw since that obviously isn't a valid code point.
To fix the referenced issue, and to hopefully prevent similar ones in the future, the patch adds *additional* validation of the charCode found by the heuristics.
Trying to enable the ESLint rule `no-shadow`, against the `master` branch, would result in a fair number of errors in the `Glyph` class in `src/core/fonts.js`.
Since the glyphs are exposed through the API, we can't very well change the `isSpace` property on `Glyph` instances. Thus the best approach seems, at least to me, to simply rename the `isSpace` helper function to `isWhiteSpace` which shouldn't cause any issues given that it's only used in the `src/core/` folder.
When reftest analyzer shows magnified pixels, there is a seemingly random offset between the mouse position and the magnified position. The reason for this is that reftest analyzer assumes all images have 800 * 1000 pixels but actually the test images have varying sizes.
The PDF document in question is *corrupt*, since it contains an XObject with a truncated dictionary and where the stream contents start without a "stream" operator.
Note that `Dict.set` will only be called with values returned through `Parser.getObj`, and thus indirectly via `Lexer.getObj`. Since neither of those methods will ever return `undefined`, we can simply assert that that's the case when inserting data into the `Dict` and thus get rid of `in` checks when doing the data lookups.
In this case, since `Dict.set` is fairly hot, the patch utilizes an *inline check* and when necessary a direct call to `unreachable` to not affect performance of `gulp server/test` too much (rather than always just calling `assert`).
For very large and complex PDF files this will help performance *slightly*, since `Dict.{get, getAsync, has}` is called *a lot* during parsing in the worker.
This patch was tested using the PDF file from issue 2618, i.e. http://bugzilla-attachments.gnome.org/attachment.cgi?id=226471, with the following manifest file:
```
[
{ "id": "issue2618",
"file": "../web/pdfs/issue2618.pdf",
"md5": "",
"rounds": 250,
"type": "eq"
}
]
```
which gave the following results when comparing this patch against the `master` branch:
```
-- Grouped By browser, stat --
browser | stat | Count | Baseline(ms) | Current(ms) | +/- | % | Result(P<.05)
------- | ------------ | ----- | ------------ | ----------- | --- | ----- | -------------
Firefox | Overall | 250 | 2838 | 2820 | -18 | -0.65 | faster
Firefox | Page Request | 250 | 1 | 2 | 0 | 11.92 | slower
Firefox | Rendering | 250 | 2837 | 2818 | -19 | -0.65 | faster
```
This patch deprecates the existing `getOpenActionDestination` API method, in favor of a better and more general `getOpenAction` method instead. (For now JavaScript actions, related to printing, are still handled as before.)
By clearly separating "regular" Print actions from the JavaScript handling, it's thus possible to get rid of the somewhat annoying and strictly incorrect warning when the viewer loads.
Fixes#11477
The PDF draws many space characters but the embedded fonts don't have a glyph named `space`, so `.notdef` should be drawn instead. PDF.js assumed that Type1 fonts define `.notdef` as the first glyph (index 0). However, now the fonts have the glyph `A` at index 0 and `.notdef` is the last one, so `A` appears where spaces are expected.
Because the rest of the font machinery in `core/fonts.js` assumes `.notdef` is at index zero, it's easiest to modify `core/type1_parser.js` so that it "repairs" fonts and makes sure `.notdef` is at index 0.
The PDF document in question is *corrupt*, since it contains multiple instances of incorrect operators.
We obviously don't want to slow down parsing of *all* documents (since most are valid), just to accommodate a particular bad PDF generator, hence the reason for the inline check before calling the `ensureStateFont` method.
Given that all of these primitives implement caching, to avoid unnecessarily duplicating those objects *a lot* during parsing, it would thus be good to actually enforce usage of `Cmd.get()`/`Name.get()`/`Ref.get()` in the code-base.
Luckily it turns out that there's an ESLint rule, which is fairly easy to use, that can be used to disallow arbitrary JavaScript syntax.
Please find additional details about the ESLint rule at https://eslint.org/docs/rules/no-restricted-syntax
*This whole patch feels somewhat arbitrary, and I'd be slightly worried about possibly breaking something else.*
To limit the impact of these changes, we only re-parse JPEG images using a reduced `scanLines` value if and only if: An unexpected EOI (End of Image) marker was encountered during decoding of Scan data *and* the "actual" `scanLines` value is at least one order of magnitude smaller than expected.
This patch makes the following changes, to improve these API methods:
- Let `PDFPageProxy.cleanup` return a boolean indicating if clean-up actually happened, since ongoing rendering will block clean-up.
Besides being used in other parts of this patch, it seems that an API user may also be interested in the return value given that clean-up isn't *guaranteed* to happen.
- Let `PDFDocumentProxy.cleanup` return the promise indicating when clean-up is finished.
- Improve the JSDoc comment for `PDFDocumentProxy.cleanup` to mention that clean-up is triggered on *both* threads (without going into unnecessary specifics regarding what *exactly* said data actually is).
Add a note in the JSDoc comment about not calling this method when rendering is ongoing.
- Change `WorkerTransport.startCleanup` to throw an `Error` if it's called when rendering is ongoing, to prevent rendering from breaking.
Please note that this won't stop *worker-thread* clean-up from happening (since there's no general "something is rendering"-flag), however I'm not sure if that's really a problem; but please don't quote me on that :-)
All of the caches that's being cleared in `Catalog.cleanup`, on the worker-thread, *should* be re-filled automatically even if cleared *during* parsing/rendering, and the only thing that probably happens is that e.g. font data would have to be re-parsed.
On the main-thread, on the other hand, clearing the caches is more-or-less guaranteed to cause rendering errors, since the rendering code in `src/display/canvas.js` isn't able to re-request any image/font data that's suddenly being pulled out from under it.
- Last, but not least, add a couple of basic unit-tests for the clean-up functionality.
While it would be nice to change the `PDFFormatVersion` property, as returned through `PDFDocumentProxy.getMetadata`, to a number (rather than a string) that would unfortunately be a breaking API change.
However, it does seem like a good idea to at least *validate* the PDF header version on the worker-thread, rather than potentially returning an arbitrary string.
In the current `AnnotationLayer` implementation, Popup annotations require that the parent annotation have already been rendered (otherwise they're simply ignored).
Usually the annotations are ordered, in the `/Annots` array, in such a way that this isn't a problem, however there's obviously no guarantee that all PDF generators actually do so. Hence we simply ensure, when rendering the `AnnotationLayer`, that the Popup annotations are handled last.
- Re-factor the "incorrect encoding" check, since this can be easily achieved using the general `findNextFileMarker` helper function (with a suitable `startPos` argument).
- Tweak a condition, to make it easier to see that the end of the data has been reached.
- Add a reference test for issue 1877, since it's what prompted the "incorrect encoding" check.
Please find additional details about the ESLint rule at https://eslint.org/docs/rules/prefer-const
With the recent introduction of Prettier this sort of mass enabling of ESLint rules becomes a lot easier, since the code will be automatically reformatted as necessary to account for e.g. changed line lengths.
Note that this patch is generated automatically, by using the ESLint `--fix` argument, and will thus require some additional clean-up (which is done separately).
Fixes#11403
The PDF uses the non-embedded Type1 font Helvetica. Character codes 194 and 160 (`Â` and `NBSP`) are encoded as `.notdef`. We shouldn't show those glyphs because it seems that Acrobat Reader doesn't draw glyphs that are named `.notdef` in fonts like this.
In addition to testing `glyphName === ".notdef"`, we must test also `glyphName === ""` because the name `""` is used in `core/encodings.js` for undefined glyphs in encodings like `WinAnsiEncoding`.
The solution above hides the `Â` characters but now the replacement character (space) appears to be too wide. I found out that PDF.js ignores font's `Widths` array if the font has no `FontDescriptor` entry. That happens in #11403, so the default widths of Helvetica were used as specified in `core/metrics.js` and `.nodef` got a width of 333. The correct width is 0 as specified by the `Widths` array in the PDF. Thus we must never ignore `Widths`.
Note that this will still allow the FBF tests to run locally, and also on the bots when invoked with `test`/`browsertest` (to not lose all the FBF test-coverage), but will no longer prevent `makeref` from running successfully on the bots.
In order to eventually get rid of SystemJS and start using native `import`s instead, we'll need to provide "complete" file identifiers since otherwise there'll be MIME type errors when attempting to use `import`.
Rather than having a copy of this regular expression in the `test/unit/api_spec.js` file, with a comment about keeping it up-to-date with the code in the viewer (note the incorrect file reference as well), we can just import it instead to simplify all of this.
The original issue did not contain a (reduced) test case that we could
include and linked test cases are not ideal for unit tests, so the
original PR could only be verified manually.
I found this a bit unfortunate considering that the print data is
exposed through the API, so I thought about how we could have an
automated test and managed to create a reduced test case with the
OpenAction dictionary from the file in the original issue.
Therefore, this commit includes a unit test for parsing OpenAction
dictionaries without `Type` entries. I verified that this PDF file
behaves the same as the original one, i.e., no print dialog is shown for
older viewers and the print dialog is shown for the most recent viewer.
This patch makes the follow changes:
- Remove no longer necessary inline `// eslint-disable-...` comments.
- Fix `// eslint-disable-...` comments that Prettier moved down, thus causing new linting errors.
- Concatenate strings which now fit on just one line.
- Fix comments that are now too long.
- Finally, and most importantly, adjust comments that Prettier moved down, since the new positions often is confusing or outright wrong.
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
There's a fair number of (primarily) `Array`s/`TypedArray`s whose formatting we don't want disturb, since in many cases that would lead to the code becoming much more difficult to read and/or break existing inline comments.
*Please note:* It may be a good idea to look through these cases individually, and possibly re-write some of the them (especially the `String` ones) to reduce the need for all of these ignore commands.
I recently noticed a couple of intermittent failures on Travis, hence this patch which changes the expectation to be identical to the 'Page Request' check in the preceding test-case.
Note that most (reasonably) modern browsers have supported this for a while now, see https://developer.mozilla.org/en-US/docs/Web/API/ReadableStream#Browser_compatibility
By moving the polyfill into `src/shared/compatibility.js` we can thus get rid of the need to manually export/import `ReadableStream` and simply use it directly instead.
The only change here which *could* possibly lead to a difference in behavior is in the `isFetchSupported` function. Previously we attempted to check for the existence of a global `ReadableStream` implementation, which could now pass (assuming obviously that the preceding checks also succeeded).
However I'm not sure if that's a problem, since the previous check only confirmed the existence of a native `ReadableStream` implementation and not that it actually worked correctly. Finally it *could* just as well have been a globally registered polyfill from an application embedding the PDF.js library.
Given that the error in question is surfaced on the API-side, this patch makes the following changes:
- Updates the wording such that it'll hopefully be slightly easier for users to understand.
- Changes the plain `Error` to an `InvalidPDFException` instead, since that should work better with the existing Error handling.
- Adds a unit-test which loads an empty PDF document (and also improves a pre-existing `InvalidPDFException` message and its test-case).
