This helper function is not really needed, since it's just a wrapper around a simple `instanceof` check, and it only adds unnecessary indirection in the code.
Unfortunately I don't have a test-case that breaks without this change, however the `stringToPDFString` helper function will fail if anything other than a string is passed to it.
The changes in this patch thus make this code more-or-less identical to that found in the `Catalog.{_collectJavaScript, parseDestDictionary}` methods.
*Please note:* This is similar to the method that existed prior to PR 3848, but the new method will *only* be used as a fallback when parsing of corrupt PDF documents.
The implementation in PR 14311 unfortunately turned out to be *way* too simplistic, as evident by the recently added test-files in issue 14303, since it may *cause* infinite loops in `PDFDocument.checkLastPage` for some corrupt PDF documents.[1]
To avoid this, the easiest solution that I could come up with was to fallback to eagerly parsing the *entire* /Pages-tree when the /Count-entry validation fails during document initialization.
Fixes *at least* two of the issues listed in issue 14303, namely the `poppler-395-0.pdf...` and `GHOSTSCRIPT-698804-1.pdf...` documents.
---
[1] The whole point of PR 14311 was obviously to *get rid of* infinte loops during document initialization, not to introduce any more of those.
*This patch basically extends the approach from PR 10392, by also checking the last page.*
Currently, in e.g. the `Catalog.numPages`-getter, we're simply assuming that if the /Pages-tree has an *integer* /Count entry it must also be correct/valid.
As can be seen in the referenced PDF documents, that entry may be completely bogus which causes general parsing to breaking down elsewhere in the worker-thread (and hanging the browser).
Rather than hoping that the /Count entry is correct, similar to all other data found in PDF documents, we obviously need to validate it. This turns out to be a little less straightforward than one would like, since the only way to do this (as far as I know) is to parse the *entire* /Pages-tree and essentially counting the pages.
To avoid doing that for all documents, this patch tries to take a short-cut by checking if the last page (based on the /Count entry) can be successfully fetched. If so, we assume that the /Count entry is correct and use it as-is, otherwise we'll iterate through (potentially) the *entire* /Pages-tree to determine the number of pages.
Unfortunately these changes will have a number of *somewhat* negative side-effects, please see a possibly incomplete list below, however I cannot see a better way to address this bug.
- This will slow down initial loading/rendering of all documents, at least by some amount, since we now need to fetch/parse more of the /Pages-tree in order to be able to access the *last* page of the PDF documents.
- For poorly generated PDF documents, where the entire /Pages-tree only has *one* level, we'll unfortunately need to fetch/parse the *entire* /Pages-tree to get to the last page. While there's a cache to help reduce repeated data lookups, this will affect initial loading/rendering of *some* long PDF documents,
- This will affect the `disableAutoFetch = true` mode negatively, since we now need to fetch/parse more data during document initialization. While the `disableAutoFetch = true` mode should still be helpful in larger/longer PDF documents, for smaller ones the effect/usefulness may unfortunately be lost.
As one *small* additional bonus, we should now also be able to support opening PDF documents where the /Pages-tree /Count entry is completely invalid (e.g. contains a non-integer value).
Fixes two of the issues listed in issue 14303, namely the `poppler-67295-0.pdf` and `poppler-85140-0.pdf` documents.
*Please note:* These changes will primarily benefit longer documents, somewhat at the expense of e.g. one-page documents.
The existing `PDFDocumentProxy.getStats` function, which in the default viewer is called for each rendered page, requires a round-trip to the worker-thread in order to obtain the current document stats. In the default viewer, we currently make one such API-call for *every rendered* page.
This patch proposes replacing that method with a *synchronous* `PDFDocumentProxy.stats` getter instead, combined with re-factoring the worker-thread code by adding a `DocStats`-class to track Stream/Font-types and *only send* them to the main-thread *the first time* that a type is encountered.
Note that in practice most PDF documents only use a fairly limited number of Stream/Font-types, which means that in longer documents most of the `PDFDocumentProxy.getStats`-calls will return the same data.[1]
This re-factoring will obviously benefit longer document the most[2], and could actually be seen as a regression for one-page documents, since in practice there'll usually be a couple of "DocStats" messages sent during the parsing of the first page. However, if the user zooms/rotates the document (which causes re-rendering), note that even a one-page document would start to benefit from these changes.
Another benefit of having the data available/cached in the API is that unless the document stats change during parsing, repeated `PDFDocumentProxy.stats`-calls will return *the same identical* object.
This is something that we can easily take advantage of in the default viewer, by now *only* reporting "documentStats" telemetry[3] when the data actually have changed rather than once per rendered page (again beneficial in longer documents).
---
[1] Furthermore, the maximium number of `StreamType`/`FontType` are `10` respectively `12`, which means that regardless of the complexity and page count in a PDF document there'll never be more than twenty-two "DocStats" messages sent; see 41ac3f0c07/src/shared/util.js (L206-L232)
[2] One example is the `pdf.pdf` document in the test-suite, where rendering all of its 1310 pages only result in a total of seven "DocStats" messages being sent from the worker-thread.
[3] Reporting telemetry, in Firefox, includes using `JSON.stringify` on the data and then sending an event to the `PdfStreamConverter.jsm`-code.
In that code the event is handled and `JSON.parse` is used to retrieve the data, and in the "documentStats"-case we'll then iterate through the data to avoid double-reporting telemetry; see https://searchfox.org/mozilla-central/rev/8f4c180b87e52f3345ef8a3432d6e54bd1eb18dc/toolkit/components/pdfjs/content/PdfStreamConverter.jsm#515-549
Having recently worked with, and reviewed patches touching, this code it seemed that it's probably not a bad idea to move that functionality into `createValidAbsoluteUrl` as new options instead.
For the `addDefaultProtocolToUrl` functionality in particular, the existing helper function was not only moved but slightly improved as well. Looking at the code, I realized that there's a small risk that it would incorrectly match a *relative* URL-string too.
With these changes, the `createValidAbsoluteUrl` call-sites in the `src/core/`-code can be simplified a little bit.
*Please note:* This patch may, indirectly, change the format of the `unsafeUrl`-property returned with relevant Annotations and OutlineItems; hence the `api-minor` tag.
However, I'd argue that it's actually more correct this way since the whole purpose of `unsafeUrl` is/was to return the URL data as-is without any parsing done.
- it aims to fix https://bugzilla.mozilla.org/show_bug.cgi?id=1716758;
- some buttons have a JS action with the pattern `app.launchURL(...)` (or similar) so extract when it's possible the url and generate a <a> element with the href equals to the found url;
- pdf.js already had some code to handle that so this patch slightly refactor that.
With this patch we'll ensure that only valid absolute URLs can be used in XFA documents, similar to the existing validation done for "regular" PDF documents.
Furthermore, we'll also attempt to add a default protocol (i.e. `http`) to URLs beginning with "www." in XFA documents as well; this on its own is enough to fix https://bugzilla.mozilla.org/show_bug.cgi?id=1731240
There's a fair number of regular expressions througout the code-base which are slightly more verbose than strictly necessary, in particular:
- We have a lot of regular expressions that use `[0-9]` explicitly, and those can be simplified to use `\d` instead.
- We have one instance of a regular expression containing a `A-Za-z0-9_` sequence, which can be simplified to use `\w` instead.
Once we're finally able to get rid of SystemJS, which is unfortunately still blocked on [bug 1247687](https://bugzilla.mozilla.org/show_bug.cgi?id=1247687), we might also want to clean-up (or even completely remove) the `BaseException` abstraction and simply extend `Error` directly instead.
At that point we'd need to (explicitly) set the `name` on each class anyway, so this patch is essentially preparing for future clean-up. Furthermore, after the `BaseException` abstraction was added there's been *multiple* issues filed about third-party minification breaking our code since `this.constructor.name` is not guaranteed to always do what you intended.
While hard-coding the strings indeed feels quite unfortunate, it's likely the "best" solution to avoid the problem described above.
In cases where even the very *first* attempt at reading from an object will throw, simply ignoring such objects will help improve rendering of *some* corrupt documents.
Note that this will lead to more parsing in some cases, but considering that this only applies to *corrupt* documents that shouldn't be a big deal.
Given that the `bytesToString(BaseStream.getBytes(...))` pattern is somewhat common throughout the `src/core/` code, it cannot hurt to add a new `BaseStream`-method which handles that case internally.
- Different fonts can be used in xfa and some of them are embedded in the pdf.
- Load all the fonts in window.document.
Update src/core/document.js
Co-authored-by: Jonas Jenwald <jonas.jenwald@gmail.com>
Update src/core/worker.js
Co-authored-by: Jonas Jenwald <jonas.jenwald@gmail.com>
* JS - Handle correctly hierarchy of fields
- it aims to fix#13132;
- annotations can inherit their actions from the parent field;
- there are some fields which act as a container for other fields:
- they can be access through js so need to add them with an empty type (nothing in the spec about that but checked in Acrobat);
- calculation order list (CO) can reference them so need make them through this.getField;
- getArray method must return kids.
- field values are number, string, ... depending of their type but nothing in the spec on how to know what's the type:
- according to the comment for Canonical Format: https://www.adobe.com/content/dam/acom/en/devnet/pdf/pdfs/PDF32000_2008.pdf#page=461
- it seems that this "type" can be guessed from js action Format (when setting a type in Acrobat DC, the only affected thing is this action).
- util.scand with an empty string returns the current date.
With the previous patch this function is now *only* accessed on the worker-thread, hence it's no longer necessary to include it in the *built* `pdf.js` file.
There's built-in ESLint rule, see `sort-imports`, to ensure that all `import`-statements are sorted alphabetically, since that often helps with readability.
Unfortunately there's no corresponding rule to sort `export`-statements alphabetically, however there's an ESLint plugin which does this; please see https://www.npmjs.com/package/eslint-plugin-sort-exports
The only downside here is that it's not automatically fixable, but the re-ordering is a one-time "cost" and the plugin will help maintain a *consistent* ordering of `export`-statements in the future.
*Note:* To reduce the possibility of introducing any errors here, the re-ordering was done by simply selecting the relevant lines and then using the built-in sort-functionality of my editor.
* the goal is to execute actions like Open or OpenAction
* can be tested with issue6106.pdf (auto-print)
* once #12701 is merged, we can add page actions
*Please note:* Once https://bugzilla.mozilla.org/show_bug.cgi?id=1247687 is implemented, and we've removed SystemJS completely, this entire patch can (and even should) be reverted.
This is similar to the existing `getLookupTableFactory` helper function, but is implemented as outlined in issue 6774.
The re-formatting of the tables were done automatically, by using find-and-replace with regular expressions.
For reasons that I don't even pretend to understand, using this particular structure for these *very* long lookup tables allow SystemJS to process the files correctly/quickly and the development viewer thus works as intended.
This simplifies/consolidates the ESLint configuration slightly in the `src/` folder, and prevents the addition of any new files where `var` is being used.[1]
Hence we no longer need to manually add `/* eslint no-var: error */` in files, which is easy to forget, and can instead disable the rule in the `src/core/` files where `var` is still in use.
---
[1] Obviously the `no-var` rule can, in the same way as every other rule, be disabled on a case-by-case basis where actually necessary.
Please note that these changes were done automatically, using `gulp lint --fix`.
Given that the major version number was increased, there's a fair number of (primarily whitespace) changes; please see https://prettier.io/blog/2020/03/21/2.0.0.html
In order to reduce the size of these changes somewhat, this patch maintains the old "arrowParens" style for now (once mozilla-central updates Prettier we can simply choose the same formatting, assuming it will differ here).
Trying to enable the ESLint rule `no-shadow`, against the `master` branch, would result in a fair number of errors in the `Glyph` class in `src/core/fonts.js`.
Since the glyphs are exposed through the API, we can't very well change the `isSpace` property on `Glyph` instances. Thus the best approach seems, at least to me, to simply rename the `isSpace` helper function to `isWhiteSpace` which shouldn't cause any issues given that it's only used in the `src/core/` folder.
This covers cases that the `--fix` command couldn't deal with, and in a few cases (notably `src/core/jbig2.js`) the code was changed to use block-scoped variables instead.
In order to eventually get rid of SystemJS and start using native `import`s instead, we'll need to provide "complete" file identifiers since otherwise there'll be MIME type errors when attempting to use `import`.
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
There's a fair number of (primarily) `Array`s/`TypedArray`s whose formatting we don't want disturb, since in many cases that would lead to the code becoming much more difficult to read and/or break existing inline comments.
*Please note:* It may be a good idea to look through these cases individually, and possibly re-write some of the them (especially the `String` ones) to reduce the need for all of these ignore commands.
Sometimes we also used `@return`, but `@returns` is what the JSDoc
documentation recommends. Even though `@return` works as an alias, it's
good to use the recommended syntax and to be consistent within the
project.
By utilizing a base "class", things become significantly simpler. Unfortunately the new `BaseException` cannot be a proper ES6 class and just extend `Error`, since the SystemJS dependency doesn't seem to play well with that.
Note also that we (generally) need to keep the `name` property on the actual `...Exception` object, rather than on its prototype, since the property will otherwise be dropped during the structured cloning used with `postMessage`.
The `src/shared/util.js` file is being bundled into both the `pdf.js` and `pdf.worker.js` files, meaning that its code is by definition duplicated.
Some main-thread only utility functions have already been moved to a separate `src/display/display_utils.js` file, and this patch simply extends that concept to utility functions which are used *only* on the worker-thread.
Note in particular the `getInheritableProperty` function, which expects a `Dict` as input and thus *cannot* possibly ever be used on the main-thread.
