- For wrapped scrolling, we unfortunately need to do a fair bit of parsing of the *current* page layout. Compared to e.g. the spread-modes, where we can easily tell how the pages are laid out, with wrapped scrolling we cannot tell without actually checking. In particular documents with varying page sizes require some care, since we need to check all pages on the "row" of the current page are visible and that there aren't any "holes" present. Otherwise, in the general case, there's a risk that we'd skip over pages if we'd simply always advance to the previous/next "row" in wrapped scrolling.
- For horizontal scrolling, this patch simply maintains the current behaviour of advancing *one* page at a time. The reason for this is to prevent inconsistent behaviour for the next and previous cases, since those cannot be handled identically. For the next-case, it'd obviously be simple to advance to the first not completely visible page. However for the previous-case, we'd only be able to go back *one* page since it's not possible to (easily) determine the page layout of non-visible pages (documents with varying page sizes being a particular issue).
- For vertical scrolling, this patch maintains the current behaviour by default. When spread-modes are being used, we'll now attempt to advance to the next *spread*, rather than just the next page, whenever possible. To prevent skipping over a page, this two-page advance will only apply when both pages of the current spread are visible (to avoid breaking documents with varying page sizes) and when the second page in the current spread is fully visible *horizontally* (to handle larger zoom values).
In order to reduce the performance impact of these changes, note that the previous/next-functionality will only call `getVisibleElements` for the scroll/spread-modes where that's necessary and that "normal" vertical scrolling is thus unaffected by these changes.
To support these changes, the `getVisibleElements` helper function will now also include the `widthPercent` in addition to the existing `percent` property.
The `PDFViewer._updateHelper` method is changed slightly w.r.t. updating the `currentPageNumber` for the non-vertical/spread modes, i.e. won't affect "normal" vertical scrolling, since that helped simplify the overall calculation of the page advance.
Finally, these new `BaseViewer` methods also allow (some) simplification of previous/next-page functionality in various viewer components.
*Please note:* There's one thing that this patch does not attempt to change, namely disabling of the previous/next toolbarButtons respectively the firstPage/lastPage secondaryToolbarButtons. The reason for this is that doing so would add quite a bit of complexity in general, and if for some reason `BaseViewer._getPageAdvance` would get things wrong we could end up incorrectly disabling the buttons. Hence it seemed overall safer to *not* touch this, and accept that the buttons won't be `disabled` despite in some edge-cases no further scrolling being possible.
* Add a parser to get font data from the default appearance
- pdfium & poppler use a special parser too to get these info.
* Update src/core/default_appearance.js
Co-authored-by: Jonas Jenwald <jonas.jenwald@gmail.com>
Co-authored-by: Jonas Jenwald <jonas.jenwald@gmail.com>
This patch is a rebased *and* refactored version of PR 9448, such that it applies cleanly given that `PDFFindController` has changed since that PR was opened; obviously keeping the original author information intact.
This patch will thus ensure that e.g. fractions, and other things that we normalize before searching, will still be highlighted correctly in the textLayer.
Furthermore, this patch also adds basic unit-tests for this functionality.
*Note:* The `[api-minor]` tag is added, since third-party implementations of the `PDFFindController` must now always use the `pageMatchesLength` property to get accurate length information (see the `web/text_layer_builder.js` changes).
Co-authored-by: Ross Johnson <ross@mazira.com>
Co-authored-by: Jonas Jenwald <jonas.jenwald@gmail.com>
There's built-in ESLint rule, see `sort-imports`, to ensure that all `import`-statements are sorted alphabetically, since that often helps with readability.
Unfortunately there's no corresponding rule to sort `export`-statements alphabetically, however there's an ESLint plugin which does this; please see https://www.npmjs.com/package/eslint-plugin-sort-exports
The only downside here is that it's not automatically fixable, but the re-ordering is a one-time "cost" and the plugin will help maintain a *consistent* ordering of `export`-statements in the future.
*Note:* To reduce the possibility of introducing any errors here, the re-ordering was done by simply selecting the relevant lines and then using the built-in sort-functionality of my editor.
Given that the API will now, after PR 12039, automatically pick the correct factories to use depending on the environment (browser vs. Node.js), we can utilize that in the unit-tests as well. This way we don't have to manually repeat the same initialization code in *multiple* unit-tests.
*Note:* The *official* PDF.js API is defined in `src/pdf.js`, hence the new exports in `src/display/api.js` will not affect that.
Also, updates the unit-test `FileReaderFactory` helpers similarily.
*Drive-by change:* Fix the `CMapReaderFactory` usage in the annotation unit-tests, since the cache should only contain raw data and not a Promise. While this obviously works as-is, having unit-tests that "abuse" the intended data format can easily lead to unnecessary failures if changes are made to the relevant `src/core/` code.
This follows the same principle as the `once` option that exists in the native `addEventListener` method, and will thus automatically remove an `EventBus` listener when it's invoked; see https://developer.mozilla.org/en-US/docs/Web/API/EventTarget/addEventListener#Parameters
Finally, this patch also tweaks some the existing `EventBus`-code to use modern features such as optional chaining and logical assignment operators.
* the goal is to execute actions like Open or OpenAction
* can be tested with issue6106.pdf (auto-print)
* once #12701 is merged, we can add page actions
* move set/clear|Timeout/Interval and crackURL code in pdf.js
* remove the "backdoor" in the proxy (used to dispatch event) and so return the dispatch function in the initializer
* remove listeners if an error occured during sandbox initialization
* add support for alert and prompt in the sandbox
* add a function to eval in the global scope
This simplifies not just this code, but the unit-tests as well, and should be sufficient as far as I can tell.
Note also that currently, in the *built* `pdf.sandbox.js` file, there's even a line reading `testMode = testMode && false;` because of an accidentally flipped pre-processor statement.
Finally, in the `scripting_spec.js` unit-test, defines `sandboxBundleSrc` at the top of the file to make it easier to find and/or change it when necessary.
Given that we already include the "Content-Disposition"-header filename, when it exists, it shouldn't hurt to also include the information from the "Content-Length"-header.
For PDF documents opened via a URL, which should be a very common way for the PDF.js library to be used, this will[1] thus provide a way of getting the PDF filesize without having to wait for the `getDownloadInfo`-promise to resolve[2].
With these API improvements, we can also simplify the filesize handling in the `PDFDocumentProperties` class.
---
[1] Assuming that the server is correctly configured, of course.
[2] Since that's not *guaranteed* to happen in general, with e.g. `disableAutoFetch = true` set.
* quickjs-eval.js has been generated using https://github.com/mozilla/pdf.js.quickjs/
* lazy load of sandbox code
* Rewrite tests to use the sandbox
* Add a task `watch-sandbox` which update bundle pdf.sandbox.js on change in the sandbox code
* in some pdf, there are actions with "event.source.hidden = ..."
* in order to handle visibility when printing, annotationStorage is extended to store multiple properties (value, hidden, editable, ...)
* When no actions then set it to null instead of empty object
* Even if a field has no actions, it needs to listen to events from the sandbox in order to be updated if an action changes something in it.
Given the number of parameters, and the fact that many of them are booleans, the call-sites are no longer particularly easy to read and understand. Furthermore, this slightly improves the formatting of the JSDoc-comment, since it needed updating as part of these changes anyway.
Finally, this removes an unnecessary `numViews === 0` check from `getVisibleElements`, since that should be *very* rare and more importantly that the `binarySearchFirstItem` function already has a fast-path for that particular case.
This probably ought to have been included in PR 12534, but better late than never I suppose, since it helps to more clearly demonstrate the bug in a way that a reference-test alone just cannot do.
When writing this unit-test I also noticed that it required a certain amount of "luck" to actually trigger the bug, prior to the patch, since it seems that the bug only reproduced for certain *unfortunate* sequences of TypedArray data. (The added unit-test contains one such, purposely simple, example.)
The unit-test files themselves shouldn't be loaded until Jasmine has been setup/configured, however that doesn't matter for the "normal" PDF.js library files. Hence we can simply `import` them in the standard way.
This mainly involves the `crypto_spec.js` file which declared most
variables before their usage, which is not really consistent with the
rest of the codebase. This also required reformatting some long arrays
in that file because otherwise we would exceed the 80 character line
limit. Overall, this makes the code more readable.
Some pdf softwares don't remove highlight annotations but make the QuadPoints array empty.
And the Rect for the annotation can be [-32768, -32768, 32768, 32768] so it leads to have a giant div which catches all the mouse events and make the pdf unusable when there are some forms elements.
*This patch is based on a couple of smaller things that I noticed when working on PR 12479.*
- Don't store the /Fields on the `formInfo` getter, since that feels like overloading it with unintended (and too complex) data, and utilize a `hasFields` boolean instead.
This functionality was originally added in PR 12271, to help determine what kind of form data a PDF document contains, and I think that we should ensure that the return value of `formInfo` only consists of "simple" data.
With these changes the `fieldObjects` getter instead has to look-up the /Fields manually, however that shouldn't be a problem since the access is guarded by a `formInfo.hasFields` check which ensures that the data both exists and is valid. Furthermore, most documents doesn't even have any /AcroForm data anyway.
- Determine the `hasFields` property *first*, to ensure that it's always correct even if there's errors when checking e.g. the /XFA or /SigFlags entires, since the `fieldObjects` getter depends on it.
- Simplify a loop in `fieldObjects`, since the object being accessed is a `Map` and those have built-in iteration support.
- Use a higher logging level for errors in the `formInfo` getter, and include the actual error message, since that'd have helped with fixing PR 12479 a lot quicker.
- Update the JSDoc comment in `src/display/api.js` to list the return values correctly, and also slightly extend/improve the description.
The last unit-test didn't work correctly, since an error was thrown in `PDFDocument._hasOnlyDocumentSignatures` because the mocked `XRef`-instance wasn't actually being set correctly.
Also, updates the `XRefMock` to use `async` methods where appropriate.
* Move display/xml_parser.js in shared to use it in worker
* Save form data in XFA datasets when pdf is a mix of acroforms and xfa
Co-authored-by: Brendan Dahl <brendan.dahl@gmail.com>
This allows for merging of dictionaries one level deeper than previously. This could be useful e.g. for /Resources dictionaries, where you want to e.g. merge their respective /Font dictionaries (and other) together rather than picking just the first one.
Good form type detection is important to get reliable telemetry and to
only show the fallback bar if a form cannot be filled out by the user.
PDF.js only supports AcroForm data, so XFA data is explicitly unsupported
(tracked in issue #2373). However, the previous form type detection
couldn't separate AcroForm and XFA well enough, causing form type
telemetry to be incorrect sometimes and the fallback bar to be shown for
forms that could in fact be filled out by the user.
The solution in this commit is found by studying the specification and
the form documents that are available to us. In a nutshell the rules are:
- There is XFA data if the `XFA` entry is a non-empty array or stream.
- There is AcroForm data if the `Fields` entry is a non-empty array and
it doesn't consist of only document signatures.
The document signatures part was not handled in the old code, causing a
document with only XFA data to also be marked as having AcroForm data.
Moreover, the old code didn't check all the data types.
Now that AcroForm and XFA can be distinguished, the viewer is configured
to only show the fallback bar for documents that only have XFA data. If
a document also has AcroForm data, the viewer can use that to render the
form. We have not found documents where the XFA data was necessary in
that case.
Finally, we include unit tests to ensure that all cases are covered and
move the form type detection out of the `parse` function so that it's
only executed if the document information is actually requested
(potentially making initial parsing a tiny bit faster).
The `AcroForm` entry is part of the catalog, not of the document, so its
logic should be placed there instead. The document should look in the
catalog to fetch it, and not have knowledge of `catDict`, which is a
member internal to the catalog.
Moreover, make the AcroForm member private on the document instance. It's
only used internally and was also never intended to be public. For users
it's exposed by the `getMetadata` API endpoint as `IsAcroFormPresent`.
Only a boolean is exposed, so we now also only store the boolean on the
document instance.
Finally, the annotation code needs access to the full AcroForm
dictionary, so it's updated to fetch the data from the catalog instead
of the document that now only holds the boolean.
The down appearance (`D`) is optional and not available in the document
from #12233, so the checkboxes are never saved/printed as checked
because the checked appearance is based on the export value that is
missing because the `D` entry is not available.
Instead, we should use the normal appearance (`N`) since that one is
required and therefore always available.
Finally, the /Off appearance is optional according to section 12.7.4.2.3
of the specification, so that needs to be taken into account to match
the specification and to fix reference test failures for the
`annotation-button-widget-print` test. That is a file that doesn't
specify an /Off appearance in the normal appearance dictionary.
The helper method `_decodeFormValue` is used to ensure that it happens
in one place. Note that form values are field values, display values
and export values.
The specification states that the field value is `null` if no item is
selected and we didn't handle this case properly. Even though this did
not break the rendering because we always convert the value to an array
and the `includes` check in the display layer would simply not match,
the field value would be `[null]` which is not expected and strange from
an API perspective.
This commit fixes that by ensuring that we return an empty array in
case the field value is `null`. The API therefore still always gives an
array for the field value, but now the code is more specific so that the
value is either an empty array or an array of strings.
This commit follows the same pattern as another unit test in this file
and both reduces existing and future code duplication (since the next
commit will extend this test with an additional input).
This patch should *hopefully* remove the intermittent unit-test failure, by using the *same* `optionalContentConfigPromise` for both `renderTask`s and thus get more predictable timing behaviour.
Add a new method to the API to get the optional content configuration. Add
a new render task param that accepts the above configuration.
For now, the optional content is not controllable by the user in
the viewer, but renders with the default configuration in the PDF.
All of the test files added exhibit different uses of optional content.
Fixes#269.
Fix test to work with optional content.
- Change the stopAtErrors test to ensure the operator list has something,
instead of asserting the exact number of operators.
This might make debugging intermittent failures a bit easier in the
future because it allows us to spot unexpected differences in the number
of tests being run and allows us to run the tests locally in the same
order in case of intermittent failures.
This patch should *hopefully* remove the `Unhandled promise rejection: ...` errors, by returning the "final" promise. Also, by pausing/delaying of rendering slightly the likelihood of the test failing in the first place should thus be reduced.
When the old `Dict.getAll()` method was removed, it was replaced with a `Dict.getKeys()` call and `Dict.get(...)` calls (in a loop).
While this pattern obviously makes a lot of sense in many cases, there's some instances where we actually want the *raw* `Dict` values (i.e. `Ref`s where applicable). In those cases, `Dict.getRaw(...)` calls are instead used within the loop. However, by introducing a new `Dict.getRawValues()` method we can reduce the number of (strictly unnecessary) function calls by simply getting the *raw* `Dict` values directly.
This patch will help pathological cases the most, with issue 2813 being a particularily problematic example. While there's only *four* `/ExtGState` resources, there's a total `29062` of `setGState` operators. Even though parsing of a single `/ExtGState` resource is quite fast, having to re-parse them thousands of times does add up quite significantly.
For simplicity we'll only cache "simple" `/ExtGState` resource, since e.g. the general `SMask` case cannot be easily cached (without re-factoring other code, which may have undesirable effects on general parsing).
By caching "simple" `/ExtGState` resource, we thus improve performance by:
- Not having to fetch/validate/parse the same `/ExtGState` data over and over.
- Handling of repeated `setGState` operators becomes *synchronous* during the `OperatorList` building, instead of having to defer to the event-loop/microtask-queue since the `/ExtGState` parsing is done asynchronously.
---
Obviously I had intended to include (standard) benchmark results with this patch, but for reasons I don't understand the test run-time (even with `master`) of the document in issue 2813 is *a lot* slower than in the development viewer (making normal benchmarking infeasible).
However, testing this manually in the development viewer (using `pdfBug=Stats`) shows a *reduction* of `~10 %` in the rendering time of the PDF document in issue 2813.
Originally there weren't any (generally) good ways to handle errors gracefully, on the worker-side, however that's no longer the case and we can simply fallback to the existing `ignoreErrors` functionality instead.
Also, please note that the "no `/XObject` found"-scenario should be *extremely* unlikely in practice and would only occur in corrupt/broken documents.
Note that the `PartialEvaluator.getOperatorList` case is especially bad currently, since we'll simply (attempt to) send the data as-is to the main-thread. This is quite bad, since in a corrupt/broken document the data *could* contain anything and e.g. be unclonable (which would cause breaking errors).
Also, we're (obviously) not attempting to do anything with this "raw" `OPS.paintXObject` data on the main-thread and simply ensuring that we never send it definately seems like the correct approach.
This special-case was added in PR 1992, however it became unnecessary with the changes in PR 4824 since all of the ColorSpace parsing is now done on the worker-thread (with only RGB-data being sent to the main-thread).
Note how the `getFontID`-method in `src/core/fonts.js` is *completely* global, rather than properly tied to the current document. This means that if you repeatedly open and parse/render, and then close, even the *same* PDF document the `fontID`s will still be incremented continuously.
For comparison the `createObjId` method, on `idFactory`, will always create a *consistent* id, assuming of course that the document and its pages are parsed/rendered in the same order.
In order to address this inconsistency, it thus seems reasonable to add a new `createFontId` method on the `idFactory` and use that when obtaining `fontID`s. (When the current `getFontID` method was added the `idFactory` didn't actually exist yet, which explains why the code looks the way it does.)
*Please note:* Since the document id is (still) part of the `loadedName`, it's thus not possible for different documents to have identical font names.
This moves, and slightly simplifies, code that's currently residing in the unit-test utils into the actual library, such that it's bundled with `GENERIC`-builds and used in e.g. the API-code.
As an added bonus, this also brings out-of-the-box support for CMaps in e.g. the Node.js examples.
This patch contains the following *notable* improvements:
- Changes the `ColorSpace.parse` call-sites to, where possible, pass in a reference rather than actual ColorSpace data (necessary for the next point).
- Adds (local) caching of `ColorSpace`s by `Ref`, when applicable, in addition the caching by name. This (generally) improves `ColorSpace` caching for e.g. the SMask code-paths.
- Extends the (local) `ColorSpace` caching to also apply when handling Images and Patterns, thus further reducing unneeded re-parsing.
- Adds a new `ColorSpace.parseAsync` method, almost identical to the existing `ColorSpace.parse` one, but returning a Promise instead (this simplifies some code in the `PartialEvaluator`).
Since this helper function is no longer used anywhere in the main code-base, but only in a couple of unit-tests, it's thus being moved to a more appropriate spot.
Finally, the implementation of `isEmptyObj` is also tweaked slightly by removing the manual loop.
Currently some JPEG images are decoded by the built-in PDF.js decoder in `src/core/jpg.js`, while others attempt to use the browser JPEG decoder. This inconsistency seem unfortunate for a number of reasons:
- It adds, compared to the other image formats supported in the PDF specification, a fair amount of code/complexity to the image handling in the PDF.js library.
- The PDF specification support JPEG images with features, e.g. certain ColorSpaces, that browsers are unable to decode natively. Hence, determining if a JPEG image is possible to decode natively in the browser require a non-trivial amount of parsing. In particular, we're parsing (part of) the raw JPEG data to extract certain marker data and we also need to parse the ColorSpace for the JPEG image.
- While some JPEG images may, for all intents and purposes, appear to be natively supported there's still cases where the browser may fail to decode some JPEG images. In order to support those cases, we've had to implement a fallback to the PDF.js JPEG decoder if there's any issues during the native decoding. This also means that it's no longer possible to simply send the JPEG image to the main-thread and continue parsing, but you now need to actually wait for the main-thread to indicate success/failure first.
In practice this means that there's a code-path where the worker-thread is forced to wait for the main-thread, while the reverse should *always* be the case.
- The native decoding, for anything except the *simplest* of JPEG images, result in increased peak memory usage because there's a handful of short-lived copies of the JPEG data (see PR 11707).
Furthermore this also leads to data being *parsed* on the main-thread, rather than the worker-thread, which you usually want to avoid for e.g. performance and UI-reponsiveness reasons.
- Not all environments, e.g. Node.js, fully support native JPEG decoding. This has, historically, lead to some issues and support requests.
- Different browsers may use different JPEG decoders, possibly leading to images being rendered slightly differently depending on the platform/browser where the PDF.js library is used.
Originally the implementation in `src/core/jpg.js` were unable to handle all of the JPEG images in the test-suite, but over the last couple of years I've fixed (hopefully) all of those issues.
At this point in time, there's two kinds of failure with this patch:
- Changes which are basically imperceivable to the naked eye, where some pixels in the images are essentially off-by-one (in all components), which could probably be attributed to things such as different rounding behaviour in the browser/PDF.js JPEG decoder.
This type of "failure" accounts for the *vast* majority of the total number of changes in the reference tests.
- Changes where the JPEG images now looks *ever so slightly* blurrier than with the native browser decoder. For quite some time I've just assumed that this pointed to a general deficiency in the `src/core/jpg.js` implementation, however I've discovered when comparing two viewers side-by-side that the differences vanish at higher zoom levels (usually around 200% is enough).
Basically if you disable [this downscaling in canvas.js](8fb82e939c/src/display/canvas.js (L2356-L2395)), which is what happens when zooming in, the differences simply vanish!
Hence I'm pretty satisfied that there's no significant problems with the `src/core/jpg.js` implementation, and the problems are rather tied to the general quality of the downscaling algorithm used. It could even be seen as a positive that *all* images now share the same downscaling behaviour, since this actually fixes one old bug; see issue 7041.
Currently image resources, as opposed to e.g. font resources, are handled exclusively on a page-specific basis. Generally speaking this makes sense, since pages are separate from each other, however there's PDF documents where many (or even all) pages actually references exactly the same image resources (through the XRef table). Hence, in some cases, we're decoding the *same* images over and over for every page which is obviously slow and wasting both CPU and memory resources better used elsewhere.[1]
Obviously we cannot simply treat all image resources as-if they're used throughout the entire PDF document, since that would end up increasing memory usage too much.[2]
However, by introducing a `GlobalImageCache` in the worker we can track image resources that appear on more than one page. Hence we can switch image resources from being page-specific to being document-specific, once the image resource has been seen on more than a certain number of pages.
In many cases, such as e.g. the referenced issue, this patch will thus lead to reduced memory usage for image resources. Scrolling through all pages of the document, there's now only a few main-thread copies of the same image data, as opposed to one for each rendered page (i.e. there could theoretically be *twenty* copies of the image data).
While this obviously benefit both CPU and memory usage in this case, for *very* large image data this patch *may* possibly increase persistent main-thread memory usage a tiny bit. Thus to avoid negatively affecting memory usage too much in general, particularly on the main-thread, the `GlobalImageCache` will *only* cache a certain number of image resources at the document level and simply fallback to the default behaviour.
Unfortunately the asynchronous nature of the code, with ranged/streamed loading of data, actually makes all of this much more complicated than if all data could be assumed to be immediately available.[3]
*Please note:* The patch will lead to *small* movement in some existing test-cases, since we're now using the built-in PDF.js JPEG decoder more. This was done in order to simplify the overall implementation, especially on the main-thread, by limiting it to only the `OPS.paintImageXObject` operator.
---
[1] There's e.g. PDF documents that use the same image as background on all pages.
[2] Given that data stored in the `commonObjs`, on the main-thread, are only cleared manually through `PDFDocumentProxy.cleanup`. This as opposed to data stored in the `objs` of each page, which is automatically removed when the page is cleaned-up e.g. by being evicted from the cache in the default viewer.
[3] If the latter case were true, we could simply check for repeat images *before* parsing started and thus avoid handling *any* duplicate image resources.
Having `assert` calls without a message string isn't very helpful when debugging, and it turns out that it's easy enough to make use of ESLint to enforce better `assert` call-sites.
In a couple of cases the `assert` calls were changed to "regular" throwing of errors instead, since that seemed more appropriate.
Please find additional details about the ESLint rule at https://eslint.org/docs/rules/no-restricted-syntax
The other testing code already uses the name of the browser as the
unique identifier, so I don't see a good reason to not use that for
identifying browsers to quit as well. Doing so simplifies the (already
somewhat complex) testing logic and ensures that we can use existing
functionality (such as the `getSession` function) to retrieve sessions.
As evident from the code, `PageViewport` only supports[1] `rotation` values which are a multiple of 90 degrees. Besides it being somewhat difficult to imagine meaningful use-cases for a non-multiple of 90 degrees `rotation`, the code also becomes both simpler and more efficient by not having to consider arbitrary `rotation` values.
However, any invalid rotation will *silently* fallback to assume zero `rotation` which probably isn't great for e.g. `PDFPageProxy.getViewport` in the API. Hence this patch, which will now enforce that only valid `rotation` values are accepted.
---
[1] As far as I can tell, from looking through the history, nothing else has ever been supported either.
*Please note:* These changes were done automatically, using the `gulp lint --fix` command.
This rule is already enabled in mozilla-central, see https://searchfox.org/mozilla-central/rev/567b68b8ff4b6d607ba34a6f1926873d21a7b4d7/tools/lint/eslint/eslint-plugin-mozilla/lib/configs/recommended.js#103-104
The main advantage, besides improved consistency, of this rule is that it reduces the size of the code (by 3 bytes for each case). In the PDF.js code-base there's close to 8000 instances being fixed by the `dot-notation` ESLint rule, which end up reducing the size of even the *built* files significantly; the total size of the `gulp mozcentral` build target changes from `3 247 456` to `3 224 278` bytes, which is a *reduction* of `23 178` bytes (or ~0.7%) for a completely mechanical change.
A large number of these changes affect the (large) lookup tables used on the worker-thread, but given that they are still initialized lazily I don't *think* that the new formatting this patch introduces should undo any of the improvements from PR 6915.
Please find additional details about the ESLint rule at https://eslint.org/docs/rules/dot-notation
This patch fixes yet another instalment in the never-ending series of "what the *bleep* was I thinking", by changing the `PDFDocumentProxy.getViewerPreferences` method to return `null` by default.
Not only is this method now consistent with many other API methods, for the data not present case, but it also avoids having to e.g. loop through an object to check if it's actually empty (note the old unit-test).
Please note that these changes were done automatically, using `gulp lint --fix`.
Given that the major version number was increased, there's a fair number of (primarily whitespace) changes; please see https://prettier.io/blog/2020/03/21/2.0.0.html
In order to reduce the size of these changes somewhat, this patch maintains the old "arrowParens" style for now (once mozilla-central updates Prettier we can simply choose the same formatting, assuming it will differ here).
With two kind of builds now being produced, with/without translation/polyfills, it's unfortunately somewhat easy for users to accidentally pick the wrong one.
In the case where a user would attempt to use a modern build of PDF.js in an older browser, such as e.g. IE11, the failure would be immediate when the code is loaded (given the use of unsupported ECMAScript features).
However in some browsers/environments, in particular Node.js, a modern PDF.js build may load correctly and thus *appear* to function, only to fail for e.g. certain API calls. To hopefully lessen the support burden, and to try and improve things overall, this patch adds checks to ensure that a modern build of PDF.js cannot be used in browsers/environments which lack native support for critical functionality (such as e.g. `ReadableStream`). Hence we'll fail early, with an error message telling users to pick an ES5-compatible build instead.
To ensure that we actually test things better especially w.r.t. usage of the PDF.js library in Node.js environments, the `gulp npm-test` task as used by Node.js/Travis was changed (back) to test an ES5-compatible build.
(Since the bots still test the code as-is, without transpilation/polyfills, this shouldn't really be a problem as far as I can tell.)
As part of these changes there's now both `gulp lib` and `gulp lib-es5` build targets, similar to e.g. the generic builds, which thanks to some re-factoring only required adding a small amount of code.
*Please note:* While it's probably too early to tell if this will be a widespread issue, it's possible that this is the sort of patch that *may* warrant being `git cherry-pick`ed onto the current beta version (v2.4.456).
This functionality was only added to the default viewer for backwards compatibility and to support the various PDF viewer tests in mozilla-central, with the intention to eventually remove it completely.
While the different mozilla-central tests cannot be *easily* converted from DOM events, it's however possible to limit that functionality to only MOZCENTRAL builds *and* when tests are running.
Rather than depending of the re-dispatching of internal events to the DOM, the default viewer can instead be used in e.g. the following way:
```javascript
document.addEventListener("webviewerloaded", function() {
PDFViewerApplication.initializedPromise.then(function() {
// The viewer has now been initialized, and its properties can be accessed.
PDFViewerApplication.eventBus.on("pagerendered", function(event) {
console.log("Has rendered page number: " + event.pageNumber);
});
});
});
```
Fixes#11718 in which the `ff` ligature glyph is at index zero in a CFF font. Beacuse this is a CIDFont, glyph names are CIDs, which are integers. Thus the string `".notdef"` is not correct. The rest of the charset data is already parsed correctly as integers when the boolean argument `cid` is true.
*This is part of a series of patches that will try to split PR 11566 into smaller chunks, to make reviewing more feasible.*
Once all the code has been fixed, we'll be able to eventually enable the ESLint no-shadow rule; see https://eslint.org/docs/rules/no-shadow
This property has never been documented and/or *intentionally* exposed through the API, instead the `PDFPageProxy.pageNumber` property is the documented/intended API to use here.
Hence pageIndex is changed to a "private" property on `PDFPageProxy` instances, and internal API functionality is also updated to *consistently* use `this._pageIndex` rather than a mix of formats.
Trying to enable the ESLint rule `no-shadow`, against the `master` branch, would result in a fair number of errors in the `Glyph` class in `src/core/fonts.js`.
Since the glyphs are exposed through the API, we can't very well change the `isSpace` property on `Glyph` instances. Thus the best approach seems, at least to me, to simply rename the `isSpace` helper function to `isWhiteSpace` which shouldn't cause any issues given that it's only used in the `src/core/` folder.
Note that `Dict.set` will only be called with values returned through `Parser.getObj`, and thus indirectly via `Lexer.getObj`. Since neither of those methods will ever return `undefined`, we can simply assert that that's the case when inserting data into the `Dict` and thus get rid of `in` checks when doing the data lookups.
In this case, since `Dict.set` is fairly hot, the patch utilizes an *inline check* and when necessary a direct call to `unreachable` to not affect performance of `gulp server/test` too much (rather than always just calling `assert`).
For very large and complex PDF files this will help performance *slightly*, since `Dict.{get, getAsync, has}` is called *a lot* during parsing in the worker.
This patch was tested using the PDF file from issue 2618, i.e. http://bugzilla-attachments.gnome.org/attachment.cgi?id=226471, with the following manifest file:
```
[
{ "id": "issue2618",
"file": "../web/pdfs/issue2618.pdf",
"md5": "",
"rounds": 250,
"type": "eq"
}
]
```
which gave the following results when comparing this patch against the `master` branch:
```
-- Grouped By browser, stat --
browser | stat | Count | Baseline(ms) | Current(ms) | +/- | % | Result(P<.05)
------- | ------------ | ----- | ------------ | ----------- | --- | ----- | -------------
Firefox | Overall | 250 | 2838 | 2820 | -18 | -0.65 | faster
Firefox | Page Request | 250 | 1 | 2 | 0 | 11.92 | slower
Firefox | Rendering | 250 | 2837 | 2818 | -19 | -0.65 | faster
```
This patch deprecates the existing `getOpenActionDestination` API method, in favor of a better and more general `getOpenAction` method instead. (For now JavaScript actions, related to printing, are still handled as before.)
By clearly separating "regular" Print actions from the JavaScript handling, it's thus possible to get rid of the somewhat annoying and strictly incorrect warning when the viewer loads.
Given that all of these primitives implement caching, to avoid unnecessarily duplicating those objects *a lot* during parsing, it would thus be good to actually enforce usage of `Cmd.get()`/`Name.get()`/`Ref.get()` in the code-base.
Luckily it turns out that there's an ESLint rule, which is fairly easy to use, that can be used to disallow arbitrary JavaScript syntax.
Please find additional details about the ESLint rule at https://eslint.org/docs/rules/no-restricted-syntax
This patch makes the following changes, to improve these API methods:
- Let `PDFPageProxy.cleanup` return a boolean indicating if clean-up actually happened, since ongoing rendering will block clean-up.
Besides being used in other parts of this patch, it seems that an API user may also be interested in the return value given that clean-up isn't *guaranteed* to happen.
- Let `PDFDocumentProxy.cleanup` return the promise indicating when clean-up is finished.
- Improve the JSDoc comment for `PDFDocumentProxy.cleanup` to mention that clean-up is triggered on *both* threads (without going into unnecessary specifics regarding what *exactly* said data actually is).
Add a note in the JSDoc comment about not calling this method when rendering is ongoing.
- Change `WorkerTransport.startCleanup` to throw an `Error` if it's called when rendering is ongoing, to prevent rendering from breaking.
Please note that this won't stop *worker-thread* clean-up from happening (since there's no general "something is rendering"-flag), however I'm not sure if that's really a problem; but please don't quote me on that :-)
All of the caches that's being cleared in `Catalog.cleanup`, on the worker-thread, *should* be re-filled automatically even if cleared *during* parsing/rendering, and the only thing that probably happens is that e.g. font data would have to be re-parsed.
On the main-thread, on the other hand, clearing the caches is more-or-less guaranteed to cause rendering errors, since the rendering code in `src/display/canvas.js` isn't able to re-request any image/font data that's suddenly being pulled out from under it.
- Last, but not least, add a couple of basic unit-tests for the clean-up functionality.
While it would be nice to change the `PDFFormatVersion` property, as returned through `PDFDocumentProxy.getMetadata`, to a number (rather than a string) that would unfortunately be a breaking API change.
However, it does seem like a good idea to at least *validate* the PDF header version on the worker-thread, rather than potentially returning an arbitrary string.
Please find additional details about the ESLint rule at https://eslint.org/docs/rules/prefer-const
With the recent introduction of Prettier this sort of mass enabling of ESLint rules becomes a lot easier, since the code will be automatically reformatted as necessary to account for e.g. changed line lengths.
Note that this patch is generated automatically, by using the ESLint `--fix` argument, and will thus require some additional clean-up (which is done separately).
In order to eventually get rid of SystemJS and start using native `import`s instead, we'll need to provide "complete" file identifiers since otherwise there'll be MIME type errors when attempting to use `import`.
Rather than having a copy of this regular expression in the `test/unit/api_spec.js` file, with a comment about keeping it up-to-date with the code in the viewer (note the incorrect file reference as well), we can just import it instead to simplify all of this.
The original issue did not contain a (reduced) test case that we could
include and linked test cases are not ideal for unit tests, so the
original PR could only be verified manually.
I found this a bit unfortunate considering that the print data is
exposed through the API, so I thought about how we could have an
automated test and managed to create a reduced test case with the
OpenAction dictionary from the file in the original issue.
Therefore, this commit includes a unit test for parsing OpenAction
dictionaries without `Type` entries. I verified that this PDF file
behaves the same as the original one, i.e., no print dialog is shown for
older viewers and the print dialog is shown for the most recent viewer.
This patch makes the follow changes:
- Remove no longer necessary inline `// eslint-disable-...` comments.
- Fix `// eslint-disable-...` comments that Prettier moved down, thus causing new linting errors.
- Concatenate strings which now fit on just one line.
- Fix comments that are now too long.
- Finally, and most importantly, adjust comments that Prettier moved down, since the new positions often is confusing or outright wrong.
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
There's a fair number of (primarily) `Array`s/`TypedArray`s whose formatting we don't want disturb, since in many cases that would lead to the code becoming much more difficult to read and/or break existing inline comments.
*Please note:* It may be a good idea to look through these cases individually, and possibly re-write some of the them (especially the `String` ones) to reduce the need for all of these ignore commands.
I recently noticed a couple of intermittent failures on Travis, hence this patch which changes the expectation to be identical to the 'Page Request' check in the preceding test-case.
Note that most (reasonably) modern browsers have supported this for a while now, see https://developer.mozilla.org/en-US/docs/Web/API/ReadableStream#Browser_compatibility
By moving the polyfill into `src/shared/compatibility.js` we can thus get rid of the need to manually export/import `ReadableStream` and simply use it directly instead.
The only change here which *could* possibly lead to a difference in behavior is in the `isFetchSupported` function. Previously we attempted to check for the existence of a global `ReadableStream` implementation, which could now pass (assuming obviously that the preceding checks also succeeded).
However I'm not sure if that's a problem, since the previous check only confirmed the existence of a native `ReadableStream` implementation and not that it actually worked correctly. Finally it *could* just as well have been a globally registered polyfill from an application embedding the PDF.js library.
Given that the error in question is surfaced on the API-side, this patch makes the following changes:
- Updates the wording such that it'll hopefully be slightly easier for users to understand.
- Changes the plain `Error` to an `InvalidPDFException` instead, since that should work better with the existing Error handling.
- Adds a unit-test which loads an empty PDF document (and also improves a pre-existing `InvalidPDFException` message and its test-case).
The bug report seem to suggest that we don't support UTF-16 strings with a BOM (byte order mark), which we *actually* do as evident by both the code and a unit-test.
The issue at play here is rather that we previously only supported big-endian UTF-16 BOM, and the `Title` string in the PDF document is using a *little-endian* UTF-16 BOM instead.
Fixes https://bugzilla.mozilla.org/show_bug.cgi?id=1593902
As can be seen in `PageViewport` only multiples of 90 degrees are really supported by the code, hence the unit-test doesn't really make sense.
(Possibly this should be enforced in the API, to avoid surprises, but given that this problem has always existed I'm passing on that for now.)
Having these methods fallback to returning `null` in only *one* particular case seems outright wrong, since a "falsy" value will thus be handled incorrectly.
The only reason that this hasn't caused issues in practice is that there's only one call-site passing in three keys, and in that case we're trying to read a font file where falling back to `null` isn't a problem.
Hopefully this patch makes sense, and in order to reduce the regression risk the implementation ensures that only completely missing widths are being replaced.
Having recently worked with this code, it struck me that most of the `postMessage` calls where `Error`s are involved have never been correctly implemented (i.e. missing `wrapReason` calls).
These functions aren't returning anything, now that they're using `ReadableStream`s, and it thus doesn't seem necessary to re-throw errors (also given the console message that's caused by it).
*Please note:* The majority of this patch was written by Yury, and it's simply been rebased and slightly extended to prevent issues when dealing with `RenderingCancelledException`.
By leveraging streams this (finally) provides a simple way in which parsing can be aborted on the worker-thread, which will ultimately help save resources.
With this patch worker-thread parsing will *only* be aborted when the document is destroyed, and not when rendering is cancelled. There's a couple of reasons for this:
- The API currently expects the *entire* OperatorList to be extracted, or an Error to occur, once it's been started. Hence additional re-factoring/re-writing of the API code will be necessary to properly support cancelling and re-starting of OperatorList parsing in cases where the `lastChunk` hasn't yet been seen.
- Even with the above addressed, immediately cancelling when encountering a `RenderingCancelledException` will lead to worse performance in e.g. the default viewer. When zooming and/or rotation of the document occurs it's very likely that `cancel` will be (almost) immediately followed by a new `render` call. In that case you'd obviously *not* want to abort parsing on the worker-thread, since then you'd risk throwing away a partially parsed Page and thus be forced to re-parse it again which will regress perceived performance.
- This patch is already *somewhat* risky, given that it touches fundamentally important/critical code, and trying to keep it somewhat small should hopefully reduce the risk of regressions (and simplify reviewing as well).
Time permitting, once this has landed and been in Nightly for awhile, I'll try to work on the remaining points outlined above.
Co-Authored-By: Yury Delendik <ydelendik@mozilla.com>
Co-Authored-By: Jonas Jenwald <jonas.jenwald@gmail.com>
This is based on a real-world PDF file I encountered very recently[1], although I'm currently unable to recall where I saw it.
Note that different PDF viewers handle these sort of errors differently, with Adobe Reader outright failing to render the attached PDF file whereas PDFium mostly handles it "correctly".
The patch makes the following notable changes:
- Refactor the `cropBox` and `mediaBox` getters, on the `Page`, to reduce unnecessary duplication. (This will also help in the future, if support for extracting additional page bounding boxes are added to the API.)
- Ensure that the page bounding boxes, i.e. `cropBox` and `mediaBox`, are never empty to prevent issues/weirdness in the viewer.
- Ensure that the `view` getter on the `Page` will never return an empty intersection of the `cropBox` and `mediaBox`.
- Add an *optional* parameter to `Util.intersect`, to allow checking that the computed intersection isn't actually empty.
- Change `Util.intersect` to have consistent return types, since Arrays are of type `Object` and falling back to returning a `Boolean` thus seem strange.
---
[1] In that case I believe that only the `cropBox` was empty, but it seemed like a good idea to attempt to fix a bunch of related cases all at once.
With the changes to the `StreamType`/`FontType` "enums" in PR 11029, one unfortunate result is that `getStats` now *always* returns empty Arrays. Something that everyone, myself included, apparently missed is that you obviously cannot index an Array with Strings :-)
I wrongly assumed that the unit-tests would catch any bugs, but they apparently suffered from the same issue as the code in `src/core/`.
Another possible option could perhaps be to use `Set`s, rather than objects, but that will require larger changes since `LoopbackPort` (in `src/display/api.js`) doesn't support them.
There's a number of spots in the current code, and tests, where `cancel` methods are not called with appropriate arguments (leading to Promises not being rejected with Errors as intended).
In some cases the cancel `reason` is implicitly set to `undefined`, and in others the cancel `reason` is just a plain String. To address this inconsistency, the patch changes things such that cancelling is done with `AbortException`s everywhere instead.
For very large and complex PDF files this will help performance slightly, since `Parser.shift` is called *a lot* during parsing.
This patch was tested using the PDF file from issue 2618, i.e. http://bugzilla-attachments.gnome.org/attachment.cgi?id=226471 (with well over *four million* `Parser.shift` calls for just the one page), using the following manifest file:
```
[
{ "id": "issue2618",
"file": "../web/pdfs/issue2618.pdf",
"md5": "",
"rounds": 100,
"type": "eq"
}
]
```
This gave the following results when comparing this patch against the `master` branch:
```
-- Grouped By browser, stat --
browser | stat | Count | Baseline(ms) | Current(ms) | +/- | % | Result(P<.05)
------- | ------------ | ----- | ------------ | ----------- | --- | ----- | -------------
Firefox | Overall | 100 | 3386 | 3322 | -65 | -1.92 | faster
Firefox | Page Request | 100 | 1 | 1 | 0 | -8.08 |
Firefox | Rendering | 100 | 3385 | 3321 | -65 | -1.92 | faster
```
A lot of the `new Parser()` call-sites look quite unwieldy/ugly as-is, with a bunch of somewhat randomly ordered arguments, which we can avoid by changing the constructor to accept an object instead. As an added bonus, this provides better documentation without having to add inline argument comments in the code.
This is similar to the existing caching used to reduced the number of `Cmd` and `Name` objects.
With the `tracemonkey.pdf` file, this patch changes the number of `Ref` objects as follows (in the default viewer):
| | Loading the first page | Loading *all* the pages |
|----------|------------------------|-------------------------|
| `master` | 332 | 3265 |
| `patch` | 163 | 996 |
The specification states that `CreationDate` is only available for
markup annotations instead of for all annotation types.
Moreover, popup annotations are not markup annotations according to the
specification, so the creation date inheritance from the parent
annotation is also removed there (note that only the modification date
is used in e.g., the viewer).
This includes the information in the core and display layers. The
date parsing logic from the document properties is rewritten according
to the specification and now includes unit tests.
Moreover, missing unit tests for the color of a popup annotation have
been added.
Finally the styling of the popup is changed slightly to make the text a
bit smaller (it's currently quite large in comparison to other viewers)
and to make the drop shadow a bit more subtle. The former is done to be
able to easily include the modification date in the popup similar to how
other viewers do this.
This way we can avoid manually building a "document id" in multiple places in `evaluator.js`, and it also let's us avoid passing in an otherwise unnecessary `PDFManager` instance when creating a `PartialEvaluator`.
