Since there are no script engine with XFA, the FormCalc parser is not used irl.
The bug @nmtigor noticed was hidden by another one (the wrong check on `match`).
After the changes in PR 14112 the `PDFViewer`-class is now "identical" to the `BaseViewer`-class and the `PDFSinglePageViewer`-class is just a very thin wrapper around the `BaseViewer`-class.
Hence we can rename these files, and also remove the abstract `BaseViewer`-class, which helps reduce some unnecessary "closures" in the *built* viewer.
*Please note:* These changes are made in two separate commits, to allow GitHub to preserve `blame` for the affected files.
After the changes in PR 14112 the `PDFViewer`-class is now "identical" to the `BaseViewer`-class and the `PDFSinglePageViewer`-class is just a very thin wrapper around the `BaseViewer`-class.
Hence we can rename these files, and also remove the abstract `BaseViewer`-class, which helps reduce some unnecessary "closures" in the *built* viewer.
*Please note:* These changes are made in two separate commits, to allow GitHub to preserve `blame` for the affected files.
Note that this patch implements the `SetOCGState`-handling in `PDFLinkService`, rather than as a new method in `OptionalContentConfig`[1], since this action is nothing but a series of `setVisibility`-calls and that it seems quite uncommon in real-world PDF documents.
The new functionality also required some tweaks in the `PDFLayerViewer`, to ensure that the `layersView` in the sidebar is updated correctly when the optional-content visibility changes from "outside" of `PDFLayerViewer`.
---
[1] We can obviously move this code into `OptionalContentConfig` instead, if deemed necessary, but for an initial implementation I figured that doing it this way might be acceptable.
Apparently this is implemented in e.g. Adobe Reader, and the specification does support it, however it cannot be commonly used in real-world PDF documents since it took over ten years for this feature to be requested.
This was moved into the `src/display/`-folder in PR 15110, for the initial editor-a11y patch. However, with the changes in PR 15237 we're again only using `binarySearchFirstItem` in the `web/`-folder and it thus seem reasonable to move it back there.
The primary reason for moving it back is that `binarySearchFirstItem` is currently exposed in the public API, and we always want to avoid that unless it's either PDF-related functionality or code that simply must be shared between the `src/`- and `web/`-folders. In this case, `binarySearchFirstItem` is a general helper function that doesn't really satisfy either of those alternatives.
While this has always worked, as a consequence of the implementation, it's never been officially supported.
In addition to adding basic unit-tests, this patch also introduces a couple of new JSDoc `@typedef`s in the API to avoid overly long lines.
An annotation doesn't have to be in the text flow, hence it's likely a bad idea
to insert its text in the text layer. But the text must be visible from a screen
reader point of view so it must somewhere in the DOM.
So with this patch, the text from a FreeText annotation is extracted and added in
a div in its HTML counterpart, and with the patch #15237 the text should be visible
and positioned relatively to the text flow.
To improve performance of the sidebar we use the page-canvases to generate the thumbnails whenever possible, since that avoids unnecessary re-rendering when the sidebar is open. This works generally well, however there's an old problem in PDF documents that contain interactive forms (when those are enabled): Note how the thumbnails become partially (or fully) blank, since those Annotations are not included in the OperatorList.[1]
We obviously want to keep using the `PDFThumbnailView.setImage`-method for most documents, however we need a way to skip it only for those pages that contain interactive forms.
As it turns out it's unfortunately not all that simple to tell, after the fact, from looking only at the OperatorList that some Annotations were skipped. While it might have been possible to try and infer that in the viewer, it'd not have been pretty considering that at the time when rendering finishes the annotationLayer has not yet been built.
The overall simplest solution that I could come up with, was instead to include a *summary* of the interactive form-state when doing the final "flushing" of the OperatorList and expose that information in the API.
---
[1] Some examples from our test-suite: `annotation-tx2.pdf` where the thumbnail is completely blank, and `bug1737260.pdf` where the thumbnail is missing the "buttons" found on the page.
Currently some `OPS.beginAnnotation` arguments will contain a `Number` value for the `isUsingOwnCanvas`-parameter, or in some cases an `undefined` value, which is inconsistent from an API perspective.
The previous version was maybe functional but definitely painful to maintain
(maybe more efficient... I don't know) so this patch aims to simplify it and
it adds some basic unit tests.
- In the annotationEditorLayer, reorder the editors in the DOM according
the position of the elements on the screen;
- add an aria-owns attribute on the "nearest" element in the text layer
which points to the added editor.
Note that these cases, which are all in older code, were found using the [`unicorn/no-for-loop`](https://github.com/sindresorhus/eslint-plugin-unicorn/blob/main/docs/rules/no-for-loop.md) ESLint plugin rule.
However, note that I've opted not to enable this rule by default since there's still *some* cases where I do think that it makes sense to allow "regular" for-loops.
Rather than including all of this external code in the PDF.js repository, we should be using the npm package instead.
Unfortunately this is slightly more complicated than you'd hope, since the `fit-curve` package (which is older) isn't directly compatible with modern JavaScript modules.
In particular, the following cases needed to be considered:
- For the development viewer (i.e. `gulp server`) and the unit-tests, we thus need to build a fitCurve-bundle that can be directly `import`ed.
- For the actual PDF.js build-targets, we can slightly reduce the sizes by depending on the "raw" `fit-curve` source-code.
- For the Node.js unit-tests, the `fit-curve` package can be used as-is.
- As in the annotation layer, use percent instead of pixels as unit;
- handle the rotation of the editor layer in allowing editing when rotation
angle is not zero;
- the different editors are rotated counterclockwise in order to be usable
when the main page is itself rotated;
- add support for saving/printing rotated editors.
Given that printing is triggered *synchronously* in browsers, it's thus possible for scripting (in PDF documents) to modify the Annotation-data while printing is currently ongoing.
To work-around that we add a new printing-specific `AnnotationStorage`, where the serializable data is *frozen* upon initialization, which the viewer can thus create/utilize during printing.
After the changes in PR 14998, these operators are now no-ops in the `src/display/canvas.js` code and should no longer be necessary.
Given that `beginAnnotations`/`endAnnotations` are not in the PDF specification, but are rather *custom* PDF.js operators, it seems reasonable to stop using them now that they've become no-ops.
While `TextLayerRenderTask` apparently makes sense in TypeScript environments, given that it's being returned by the `renderTextLayer`-function in the API, we really don't want to extend the *public* API by simply exporting the class directly in `src/pdf.js` since it should never be called/initialized manually.
Hence we follow the same pattern as in PR 14013, and add some very basic unit-tests to ensure that `renderTextLayer` always returns a `TextLayerRenderTask`-instance as expected.
- it aims to fix https://bugzilla.mozilla.org/show_bug.cgi?id=1771477;
- hangul contains some syllables which are decomposed when using NFD, hence
the text must be correctly shifted in case it contains some of them.
The current `lastModified`-getter, which only contains a time-stamp, is a fairly crude way of detecting if the stored data has actually been changed. In particular, when the `getRawValue`-method is used, the `lastModified`-getter doesn't cope with data being modified from the "outside".
To fix these issues[1], and to prevent any future bugs in this code, this patch introduces a new `AnnotationStorage.hash`-getter which computes a hash of the currently stored data. To simplify things this re-uses the existing `MurmurHash3_64`-implementation, which required moving that file into the `src/shared/`-folder, since its performance should be good enough here.
---
[1] Given how the `AnnotationStorage.lastModified`-getter was used, this would have been limited to *printing* of forms.
- since resetForm function reset a field value a calculateNow is consequently triggered.
But the calculate callback can itself call resetForm, hence an infinite recursive loop.
So basically, prevent calculeNow to be triggered by itself.
- in Firefox, the letters entered in some fields were duplicated: "AaBb" instead of "AB".
It was mainly because beforeInput was triggering a Keystroke which was itself triggering
an input value update and then the input event was triggered.
So in order to avoid that, beforeInput calls preventDefault and then it's up to the JS to
handle the event.
- fields have a property valueAsString which returns the value as a string. In the
implementation it was wrongly used to store the formatted value of a field (2€ when the user
entered 2). So this patch implements correctly valueAsString.
- non-rendered fields can be updated in using JS but when they're, they must take some properties
in the annotationStorage. It was implemented for field values, but it wasn't for
display, colors, ...
- it fixes#14862 and #14705.
Interestingly enough this appears to be the very first case of *encoded* dest-strings, in /GoTo destination dictionaries, that we've actually come across. What's really fascinating is that it's less than a week after issue 14847, given that these issues are *somewhat* similar.
As it turns out, most of the code-paths in the `PDFImage`-class won't actually pass the TypedArray (containing the image-data) to the `ColorSpace`-code. Hence we *generally* don't need to force the image-data to be a `Uint8ClampedArray`, and can just as well directly use a `Uint8Array` instead.
In the following cases we're returning the data without any `ColorSpace`-parsing, and the exact TypedArray used shouldn't matter:
- b72a448327/src/core/image.js (L714)
- b72a448327/src/core/image.js (L751)
In the following cases the image-data is only used *internally*, and again the exact TypedArray used shouldn't matter:
- b72a448327/src/core/image.js (L762) with the actual image-data being defined (as `Uint8ClampedArray`) further below
- b72a448327/src/core/image.js (L837)
*Please note:* This is tagged `api-minor` because it's API-observable, given that *some* image/mask-data will now be returned as `Uint8Array` rather than using `Uint8ClampedArray` unconditionally. However, that seems like a small price to pay to (slightly) reduce memory usage during image-conversion.
Initially I considered updating the `NameOrNumberTree`-implementation to handle encoded keys, however that quickly became somewhat messy (especially in the `NameOrNumberTree.get`-method) since only NameTrees using string-keys.
Hence the easiest solution, as far as I'm concerned, was thus to just update the `Catalog.destinations`-getter instead. Please note that in the referenced PDF document the `Catalog.destination`-method will thus fallback to fetch all destinations, which should be fine since this is the very first case of encoded keys that we've seen.
Also changes the `NameOrNumberTree.getAll`-method to prevent a possible run-time error, although we've so far not seen such a case, for any non-Array Kids-entries found in a NameTree/NumberTree.
Finally, to improve overall consistency and to hopefully prevent future bugs, the patch also updates a couple of other `NameTree` call-sites to correctly handle encoded keys. (Note that the `Catalog.attachments`-getter was already doing this.)
- it aims to partially fix performance issue reported: https://bugzilla.mozilla.org/show_bug.cgi?id=857031;
- the idea is too avoid to use byte arrays but use ImageBitmap which are a way faster to draw:
* an ImageBitmap is Transferable which means that it can be built in the worker instead of in the main thread:
- this is achieved in using an OffscreenCanvas when it's available, there is a bug to enable them
for pdf.js: https://bugzilla.mozilla.org/show_bug.cgi?id=1763330;
- or in using createImageBitmap: in Firefox a task is sent to the main thread to build the bitmap so
it's slightly slower than using an OffscreenCanvas.
* it's transfered from the worker to the main thread by "reference";
* the byte buffers used to create the image data have a very short lifetime and ergo the memory used is globally
less than before.
- Use the localImageCache for the mask;
- Fix the pdf issue4436r.pdf: it was expected to have a binary stream for the image;
- Move the singlePixel trick from operator_list to image: this way we can use this trick even if it isn't in a set
as defined in operator_list.
- it aims to fix issue #14627;
- the basic idea of the recent text refactoring was to only consider the rendered visible whitespaces.
But sometimes, the heuristics aren't correct and although some whitespaces are in the text stream
they weren't in the text chunks because they were too small. Hence we added some exceptions, for example,
we always add a whitespace when it is between two non-whitespace chars but only when in the same Tj.
So basically, this patch removes the constraint to have the chars in the same Tj
(in using a circular buffer to save the two last chars) but don't add a space when the visible space is really
too small (hence `NOT_A_SPACE_FACTOR`).
There's a couple of `getDocument` parameters that should be numbers, but which are currently not *fully* validated to prevent issues elsewhere in the code-base.
Also, improves validation of the `ownerDocument` parameter since we currently accept more-or-less anything here.
This patch removes the existing `forEach` methods, in favor of making the classes properly iterable instead. Given that the classes are using a `Set` respectively a `Map` internally, implementing this is very easy/efficient and allows us to simplify some existing code.
Apparently this unit-test works in Node.js now, hence it's *possible* that the reason it didn't work previously is that there were bugs in our old `structuredClone` polyfill.
This function is currently placed in the `src/shared/util.js` file, which means that the code is duplicated in both of the *built* `pdf.js` and `pdf.worker.js` files. Furthermore, it only has a single call-site which is also specific to the `GENERIC`-build of the PDF.js library.
Hence this helper function is instead moved into the `src/display/api.js` file, in such a way that it's conditionally defined but still can be unit-tested.
Besides converting the `send` function to use the Fetch API, this patch also changes the method to return a `Promise` to get rid of the callback function. (Although, currently there's no call-site passing in a callback function.)
The call-sites are replaced by direct `typeof`-checks instead, which removes unnecessary function calls. Note that in the `src/`-folder we already had more `typeof`-cases than `isString`-calls.
Currently we'll happily attempt to send any argument passed to this method over to the worker-thread, without doing any sort of validation.
That could obviously be quite bad, since there's first of all no protection against sending unclonable data. Secondly, it's also possible to pass data that will cause the `Ref.get` call in the worker-thread to fail immediately.
In order to address all of these issues, we'll now properly validate the argument passed to `PDFDocumentProxy.getPageIndex` and when necessary reject already on the main-thread instead.
Trying to use a non-string argument in either a `Cmd` or a `Name` is not intended, and would basically be an implementation error. Hence we can add a non-PRODUCTION check to enforce this, similar to the existing one used e.g. in the `Dict.set` method.
Trying to use a non-string `key` in a `Dict` is not intended, and would basically be an implementation error. Hence we can add a non-PRODUCTION check to enforce this, complementing the existing `value` check added in PR 11672.
The call-sites are replaced by direct `typeof`-checks instead, which removes unnecessary function calls. Note that in the `src/`-folder we already had more `typeof`-cases than `isNum`-calls.
These changes were *mostly* done using regular expression search-and-replace, with two exceptions:
- In `Font._charToGlyph` we no longer unconditionally update the `width`, since that seems completely unnecessary.
- In `PDFDocument.documentInfo`, when parsing custom entries, we now do the `typeof`-check once.
Unless you actually need to check that something is both a `Name` and also of the *correct* type, using `instanceof Name` directly should be a tiny bit more efficient since it avoids one function call and an unnecessary `undefined` check.
This patch uses ESLint to enforce this, since we obviously still want to keep the `isName` helper function for where it makes sense.
Unless you actually need to check that something is both a `Dict` and also of the *correct* type, using `instanceof Dict` directly should be a tiny bit more efficient since it avoids one function call and an unnecessary `undefined` check.
This patch uses ESLint to enforce this, since we obviously still want to keep the `isDict` helper function for where it makes sense.
Unless you actually need to check that something is both a `Cmd` and also of the *correct* type, using `instanceof Cmd` directly should be a tiny bit more efficient since it avoids one function call and an unnecessary `undefined` check.
This patch uses ESLint to enforce this, since we obviously still want to keep the `isCmd` helper function for where it makes sense.
This helper function is not really needed, since it's just a wrapper around a simple `instanceof` check, and it only adds unnecessary indirection in the code.
At this point all the various Stream-classes extends an abstract base-class, hence this helper function is no longer necessary and only adds unnecessary indirection in the code.
- it aims to fix#14562;
- 'X-\n' were not correctly positioned;
- when X is a diacritic (e.g. in "sä-\n", which is decomposed into "sa¨-\n") we must handle both things:
- diacritics on the one hand;
- "-\n" on the other hand.
Given that most of the code-base is already using native functionality, we can update these unit-tests similarily as well.
- For the `blob:`-URL test, we simply use `URL.createObjectURL(...)` and `Blob` directly instead.
- For the `data:`-URL test, we simply use `btoa` to do the Base64 encoding and then build the final URL-string.
This is essentially a *continuation* of PR 7926, where we added support for rejecting the current `PDFDocumentLoadingTask`-promise by throwing inside of the `onPassword`-callback.
Hence the naive way to address [bug 1754421](https://bugzilla.mozilla.org/show_bug.cgi?id=1754421) would be to simply throw in the `onPassword`-callback used in the default viewer. However it unfortunately turns out to not work, since the password input/validation is asynchronous, and we thus need another approach.
The simplest solution that I can come up with here, is thus to *extend* the `onPassword`-callback to also reject the current `PDFDocumentLoadingTask`-instance if an `Error` is explicitly passed as the input to the callback function. (This doesn't feel great, but I cannot see a better solution that isn't really complicated.)
This appears to be consistent with the behaviour in both Adobe Reader and PDFium (in Google Chrome); this is essentially the same approach as used for a single decimal point in PR 9827.
- get original index in using a dichotomic seach instead of a linear one;
- normalize the text in using NFD;
- convert the query string into a RegExp;
- replace whitespaces in the query with \s+;
- handle hyphens at eol use to break a word;
- add some \s* around punctuation signs
With these changes, we'll now *always* replace all whitespaces with standard spaces (0x20). This behaviour is already, since many years, the default in both the viewer and the browser-tests.
- it aims to fix#14502 and bug 1721335;
- Acrobat and Pdfium do the same;
- it'll avoid to have truncated data when printed;
- change the factor to compute font size in using field height: lineHeight = 1.35*fontSize
- this is the value used by Acrobat.
- in order to not have truncated strings on the bottom, add few basic metrics for standard fonts.
This patch implements this by looking for the UTF-8 BOM, i.e. `\xEF\xBB\xBF`, in order to determine the encoding.[1]
The actual conversion is done using the `TextDecoder` interface, which should be available in all environments/browsers that we support; please see https://developer.mozilla.org/en-US/docs/Web/API/TextDecoder#browser_compatibility
---
[1] Assuming that everything lacking a UTF-16 BOM would have to be UTF-8 encoded really doesn't seem correct.
While `PageViewport` apparently makes sense in TypeScript environments, given that it's being returned by the `PDFPageProxy.getViewport`-method in the API, we really don't want to extend the *public* API by simply exporting the class directly in `src/pdf.js` since it should never be called/initialized manually.
Hence we follow the same pattern as in PR 14013, and also extend the API unit-tests to ensure that `PDFPageProxy.getViewport` always returns a `PageViewport`-instance as expected.
This helper function has never been used in e.g. the worker-thread, hence its placement in `src/shared/util.js` led to a *small* amount of unnecessary duplication.
After the previous patches this helper function is now *only* used in the viewer, hence it no longer seems necessary to expose it through the official API.
*Please note:* It seems somewhat unlikely that third-party users were relying *directly* on this helper function, which is why it's not being exported as part of the viewer components. (If necessary, we can always change this later on.)
I happened to notice that we didn't have *any* unit-tests for either `getFieldObjects` or `getCalculationOrderIds`, on the `PDFDocumentProxy` class, which seems unfortunate since it's API functionality that we depend on in e.g. the viewer.
Besides converting `Catalog.getPageDict` to an `async` method, thus simplifying the code, this patch also allows us to pro-actively fix a existing issue.
Note how we're looking up References in such a way that `MissingDataException`s won't cause trouble, however it's *technically possible* that the entries (i.e. /Count, /Kids, and /Type) in a /Pages Dictionary could actually be indirect objects as well. In the existing code this could lead to *some*, or even all, pages failing to load/render as intended.
In practice that doesn't *appear* to happen in real-world PDF documents, but given all the weird things that PDF software do I'd prefer to fix this pro-actively (rather than waiting for a bug report).
With `Catalog.getPageDict` being `async` this is now really simple to address, however I didn't want to introduce a bunch more *unconditional* asynchronicity in this method if it could be avoided (since that could slow things down). Hence we'll *synchronously* lookup the *raw* data in a /Pages Dictionary, and only fallback to asynchronous data lookup when a Reference was encountered.
In addition to the above, this patch also makes the following notable changes:
- Let `Catalog.getPageDict` *consistently* reject with the actual error, regardless of what data we're fetching. Previously we'd "swallow" the actual errors except when looking up Dictionary entries, which is inconsistent and thus seem unfortunate. As can be seen from the updated unit-tests this change is API-observable, hence why the patch is tagged `[api-minor]`.
- Improve the consistency of the Dictionary /Type-checks in both the `Catalog.getPageDict` and `Catalog.getAllPageDicts` methods.
In `Catalog.getPageDict` there's a fallback code-path where we're *incorrectly* checking the /Page Dictionary for a /Contents-entry, which is wrong since a /Page Dictionary doesn't need to have a /Contents-entry in order to be valid.
For consistency the `Catalog.getAllPageDicts` method is also updated to handle errors in the /Type-lookup correctly.
- Reduce the `PagesCountLimit.PAUSE_EAGER_PAGE_INIT` viewer constant, to further improve loading/rendering performance of the *second* page during initialization of very long documents; PR 14359 follow-up.
The size of the `web/ui_utils.js` file has increased over time, as more code has been added to (or moved into) that file. To reduce its size slightly, this patch moves the event-related functionality into a separate file.
