- it aims to fix issue #14627;
- the basic idea of the recent text refactoring was to only consider the rendered visible whitespaces.
But sometimes, the heuristics aren't correct and although some whitespaces are in the text stream
they weren't in the text chunks because they were too small. Hence we added some exceptions, for example,
we always add a whitespace when it is between two non-whitespace chars but only when in the same Tj.
So basically, this patch removes the constraint to have the chars in the same Tj
(in using a circular buffer to save the two last chars) but don't add a space when the visible space is really
too small (hence `NOT_A_SPACE_FACTOR`).
When there are *multiple* empty glyphs at the start of the data, ensure that the "first" glyph gets a correct `endOffset` to avoid skipping it during parsing in the `sanitizeGlyph` function.
- it aims to fix:
- https://bugzilla.mozilla.org/show_bug.cgi?id=1753075;
- https://bugzilla.mozilla.org/show_bug.cgi?id=1743245;
- https://bugzilla.mozilla.org/show_bug.cgi?id=1710019;
- issue #13211;
- issue #14521.
- previously we were trying to adjust lineWidth to have something correct after the current transform is applied but this approach was not correct because finally the pixel is rescaled with the same factors in both directions.
And sometimes those factors must be different (see bug 1753075).
- So the idea of this patch is to apply a scale matrix to the current transform just before setting lineWidth and stroking. This scale matrix is computed in order to ensure that after transform, a pixel will have its two thickness greater than 1.
Soft masks can be enabled/disabled at anytime and at different
points in the save/restore stack. This can lead to
the amount of save/restores becoming unbalanced across the
two canvases. Instead of save/restoring on the temporary canvas
change it so we only track state on the main (suspended canvas).
I was also getting an out balance stack from patterns, so I've also
fixed that and added a warning that will at least show up on chrome.
It would be nice to add this so Firefox at some point too.
Fixes#11328, #14297 and bug 1755507
- get original index in using a dichotomic seach instead of a linear one;
- normalize the text in using NFD;
- convert the query string into a RegExp;
- replace whitespaces in the query with \s+;
- handle hyphens at eol use to break a word;
- add some \s* around punctuation signs
- it aims to fix#14502 and bug 1721335;
- Acrobat and Pdfium do the same;
- it'll avoid to have truncated data when printed;
- change the factor to compute font size in using field height: lineHeight = 1.35*fontSize
- this is the value used by Acrobat.
- in order to not have truncated strings on the bottom, add few basic metrics for standard fonts.
- it aims to fix#14497;
- previously, only rotations with an angle 0, 90, 180 or 270 were taken into account;
- so generalize to any angle but keep the fast path for 0, 90, ... because they're likely more common than anything else.
This commit fixes Bug 1743245 (Grided PDF file lines rendered too thick) which was created by a fix for #12868 .
The lineWidth was set to round(1 * this._combinedScaleFactor) when the pixel is drawn as a parallelorgam with a height <1. This fix changes this to floor(1*this._combinedScaleFactor) .
This change shows a visual result comparable to Chrome and Acrobat.
Regarding the last PR 3 statements in canvas.js are affected and will change with this commit (stroke and paintChar).
renaming the reference files to naming comvention
- it aims to fix issue #14307;
- this event has been added recently in Firefox and we can now use it;
- fix few bugs in aform.js or in annotation_layer.js;
- add some integration tests to test keystroke events (see `AFSpecial_Keystroke`);
- make dispatchEvent in the quickjs sandbox async.
Please refer to https://www.pdfa.org/norm-refs/Type1Fonts.pdf#page=15 for the expected format for the /CharStrings entries.
In the referenced PDF document the /CharStrings are missing the expected end-token, which causes us to swallow the start of the next glyph name.
In corrupt PDF documents Type3 fonts may introduce circular dependencies, thus resulting in the affected font(s) never loading and parsing/rendering never completing.
Note that I've not seen any real-world examples of this kind of font corruption, but the attached PDF document was rather found in https://github.com/pdf-association/safedocs/tree/main/Miscellaneous%20Targeted%20Test%20PDFs
*Please note:* That repository contains a number of reduced test-cases that are specifically intended to test interoperability (between PDF viewer) and parsing/rendering for various kinds of strange/corrupt PDF documents.
Some of the test-cases found there may thus not make sense to try and "fix" upfront, in my opinion, unless the problems are also found in real-world PDF documents.
This prevents the `BaseSVGFactory.create`-method from throwing, and thus preventing any remaining Annotations (on the page) from rendering in corrupt documents.
Currently the `Catalog.metadata` getter only handles errors during parsing, however in a *corrupt* PDF document fetching of the raw /Metadata can obviously fail as well.
Without this patch the `PDFDocumentProxy.getMetadata` method, in the API, can thus fail which it *never* should and this will cause the viewer to not initialize all state as expected.
Fixes one of the documents in issue 14305.
*Please note:* This is similar to the method that existed prior to PR 3848, but the new method will *only* be used as a fallback when parsing of corrupt PDF documents.
The implementation in PR 14311 unfortunately turned out to be *way* too simplistic, as evident by the recently added test-files in issue 14303, since it may *cause* infinite loops in `PDFDocument.checkLastPage` for some corrupt PDF documents.[1]
To avoid this, the easiest solution that I could come up with was to fallback to eagerly parsing the *entire* /Pages-tree when the /Count-entry validation fails during document initialization.
Fixes *at least* two of the issues listed in issue 14303, namely the `poppler-395-0.pdf...` and `GHOSTSCRIPT-698804-1.pdf...` documents.
---
[1] The whole point of PR 14311 was obviously to *get rid of* infinte loops during document initialization, not to introduce any more of those.
This only applies to severely corrupt documents, where it's possible that the `Parser` throws when we try to access e.g. a /Kids-entry in the /Pages-tree.
Fixes two of the issues listed in issue 14303, namely the `poppler-742-0.pdf...` and `poppler-937-0.pdf...` documents.
*Please note:* While this patch on its own is sufficient to prevent the worker-thread from hanging, however in combination with PR 14311 these PDF documents will both load *and* render correctly.
Rather than focusing on the particular structure of these PDF documents, it seemed (at least to me) to make sense to try and prevent all circular references when fetching/looking-up data using the XRef table.
To avoid a solution that required tracking the references manually everywhere, the implementation settled on here instead handles that internally in the `XRef.fetch`-method. This should work, since that method *and* the `Parser`/`Lexer`-implementations are completely synchronous.
Note also that the existing `XRef`-caching, used for all data-types *except* Streams, should hopefully help to lessen the performance impact of these changes.
One *potential* problem with these changes could be certain *browser* exceptions, since those are generally not catchable in JavaScript code, however those would most likely "stop" worker-thread parsing anyway (at least I hope so).
Finally, note that I settled on returning dummy-data rather than throwing an exception. This was done to allow parsing, for the rest of the document, to continue such that *one* bad reference doesn't prevent an entire document from loading.
Fixes two of the issues listed in issue 14303, namely the `poppler-91414-0.zip-2.gz-53.pdf` and `poppler-91414-0.zip-2.gz-54.pdf` documents.
*This patch basically extends the approach from PR 10392, by also checking the last page.*
Currently, in e.g. the `Catalog.numPages`-getter, we're simply assuming that if the /Pages-tree has an *integer* /Count entry it must also be correct/valid.
As can be seen in the referenced PDF documents, that entry may be completely bogus which causes general parsing to breaking down elsewhere in the worker-thread (and hanging the browser).
Rather than hoping that the /Count entry is correct, similar to all other data found in PDF documents, we obviously need to validate it. This turns out to be a little less straightforward than one would like, since the only way to do this (as far as I know) is to parse the *entire* /Pages-tree and essentially counting the pages.
To avoid doing that for all documents, this patch tries to take a short-cut by checking if the last page (based on the /Count entry) can be successfully fetched. If so, we assume that the /Count entry is correct and use it as-is, otherwise we'll iterate through (potentially) the *entire* /Pages-tree to determine the number of pages.
Unfortunately these changes will have a number of *somewhat* negative side-effects, please see a possibly incomplete list below, however I cannot see a better way to address this bug.
- This will slow down initial loading/rendering of all documents, at least by some amount, since we now need to fetch/parse more of the /Pages-tree in order to be able to access the *last* page of the PDF documents.
- For poorly generated PDF documents, where the entire /Pages-tree only has *one* level, we'll unfortunately need to fetch/parse the *entire* /Pages-tree to get to the last page. While there's a cache to help reduce repeated data lookups, this will affect initial loading/rendering of *some* long PDF documents,
- This will affect the `disableAutoFetch = true` mode negatively, since we now need to fetch/parse more data during document initialization. While the `disableAutoFetch = true` mode should still be helpful in larger/longer PDF documents, for smaller ones the effect/usefulness may unfortunately be lost.
As one *small* additional bonus, we should now also be able to support opening PDF documents where the /Pages-tree /Count entry is completely invalid (e.g. contains a non-integer value).
Fixes two of the issues listed in issue 14303, namely the `poppler-67295-0.pdf` and `poppler-85140-0.pdf` documents.
For this particular PDF document, we have `/W [1 2 166666666666666666666666666]` which obviously makes no sense.
While this patch makes no attempt at actually validating the entries in the /W-array, we'll now simply abort all processing when the end of the PDF document has been reached (thus preventing hanging the browser).
Please note that this patch doesn't enable the PDF document to be loaded/rendered, but at least it fails "correctly" now.
Fixes one of the issues listed in issue 14303, namely the `REDHAT-1531897-0.pdf`document.
This bug was surprisingly difficult to track down, since it didn't just depend on range-requests being used but also on how quickly the document was loaded. To even be able to reproduce this locally, I had to use a very small `rangeChunkSize`-value (note the unit-test).
The cause of this bug is a bogus entry in the XRef-table, causing us to attempt to request data from *beyond* the actual document size and thus getting into an infinite loop.
Fixes *one* of the issues listed in issue 14303, namely the `PDFBOX-4352-0.pdf` document.
We were incorrectly using the transform in the pattern before it had been
adjusted causing the pattern to be misplaced relative to the page.
Fixes: ShowText-ShadingPattern.pdf (already in corpus)
Fixes: #8111Fixes: #9243
Subfrom nomin displays even though it's subform is set to <occur max=-1 min=0>
If we look through specs of XFA 3.3 : https://www.pdfa.org/norm-refs/XFA-3_3.pdf
- The min attribute is used when processing a form that contains data. Regardless of the data at least this number of instances is included. It is permissible to set this value to zero, in which case the container is entirely excluded if there is no data for it.
However, in our case it doesn't happen, because we let our empty dataNode get through. Though by setting a clause:
- eliminate unmatched data with occur min=0
we are checking our empty data and sending it to uselessNode array where at the end it gets removed;
Very short strings can narrowly miss the existing Bidi-detection threshold, leading to incorrect text-selection and copying behaviour.
In my testing, neither Adobe Reader or PDFium seem to handle copying "correctly" for this document. Hence it's not entirely clear to me that we actually want to fix this, since tweaking these heuristics can *obviously* cause regressions elsewhere (and our test coverage for RTL-text isn't exactly great).
It seems that issue 10301 was fixed by PR 13424, by combining the spans, however given that we don't have a lot of test coverage for RTL-text I figured that adding a simple reference test wouldn't hurt (rather than just closing the issue as WORKSFORME).
The old method of handling soft masks had a number of issues where the temporary
drawing canvas and the suspended main canvas could get out of sync
(e.g. mismatched save/restores or clip state) or we could end up compositing at
the wrong time. A good example of things getting out sync is the reduced test
case in #9017.
To fix this I've changed two big things:
1) Duplicate all the needed graphics state from the temporary canvas to the
suspended main canvas. This ensure the canvases stay in sync so that when we
switch back to the main canvas the graphics state stack is the same
(e.g. transforms, clip paths).
2) Immediately composite after each drawing operation. This ensures that if
there's an active clip region that we'll still be able to composite the correct
portions of the canvas. Note: This solution could be avoided by using
getImageData and putImageData since those ignore clipping region, but this is
very very slow. Note2: I also think the old way of only compositing at the end
of the soft mask is incorrect and can lead to wrong colors if drawing over the
same region, but in practice this doesn't seem to matter much.
Fixes: #5781Fixes: #5853Fixes: #7267Fixes: #7891Fixes: #8403Fixes: #8624Fixes: #12798Fixes: #13891Fixes: #9017 (reduced test case)
Fixes: https://bugzilla.mozilla.org/show_bug.cgi?id=1703683
- PR #13257 fixed a lot of issues but not all and this patch aims to fix almost all remaining issues.
- the idea in this new patch is to compare position of new glyph with the last position where a glyph has been drawn;
- no space are "drawn": it just moves the cursor but they aren't added in the chunk;
- so this way a space followed by a cursor move can be treated as only one space: it helps to merge all spaces into one.
- to make difference between real spaces and tracking ones, we used a factor of the space width (from the font)
- it was a pretty good idea in general but it fails with some fonts where space was too big:
- in Poppler, they're using a factor of the font size: this is an excellent idea (<= 0.1 * fontSize implies tracking space).
If a PDF included an embedded TrueType font whose preferred character
map (cmap) was in "format 2", the code would select that character map
and then refuse to read it because of an unsupported format, thus
causing the characters not to be rendered. This commit implements
support for format 2 as described at the link below.
https://developer.apple.com/fonts/TrueType-Reference-Manual/RM06/Chap6cmap.html
- it aims to fix#12721.
- Thanks to PR #14023, we've now the fieldObjects in the annotation layer so we can easily map fields names on their id if needed.
- Reset values in the storage, in the JS sandbox and in the visible html elements.
In the referenced bug, the embedded fonts contain custom CMap-data that only include strings. Note how for embedded composite TrueType fonts we're using the CMap-data when building the glyph mapping, and currently we end up with a completely empty map because the code expects only CID *numbers*.
Furthermore, just fixing the glyph mapping alone isn't sufficient to fully address the bug, since we also need to consider this "special" kind of CMap-data when looking up glyph widths.
In order to implement this, we utilize the existing `bidi` function to infer the text-direction of /T and /Contents entries. While this may not be perfect in cases where one PopupAnnotation mixes LTR and RTL languages, it should work well enough in most cases.
To avoid having to add *two new* properties in lots of annotations, supplementing the existing `title`/`contents`-properties, this patch instead re-factors the existing code such that the properties are replaced by Objects (containing `str` and `dir`).
*Please note:* In order avoid breaking existing third-party implementations, `GENERIC`-builds of the PDF.js library will still provide the old `title`/`contents`-properties on annotations returned by `PDFPageProxy.getAnnotations`.
Currently we only exclude /Encoding entries that also contains a /Differences array, which is the cause of the text-selection problem in the referenced issue.
In order to address this we'll now also exclude /Encoding entries that contain one of the predefined *named* encodings, and no longer require that it also contains a /Differences array.
*Please note:* This patch cases a small "regression" in the `bug1130815-text` test-case, however this is actually an improvement when compared with Adobe Reader and PDFium (in Google Chrome).
*Please note:* All of this feels very handwavy, but at least it passes all tests locally. Hopefully we have enough tests for this part of the font code.
For non-embedded composite standard fonts with an "incomplete" /CIDToGIDMap, we'll now fallback to an *explicitly defined* /ToUnicode map even when that one happens to be an /Identity-H or /Identity-V map.
The `Font.fallbackToSystemFont` method is unfortunately getting more and more special-cases, however that might be unavoidable given all the weird non-embedded fonts found in the wild :-(
While some of the output looks worse to my eye, this behavior more
closely matches what I see when I open the PDFs in Adobe acrobat.
Fixes: #4706, #9713, #8245, #1344
In the PDF document some of the glyphs have bogus `differences`-entries[1] that cannot be resolved to valid glyph names, thus causing the glyph mapping to fail.
My initial idea was to use a similar approach as in the `PartialEvaluator._simpleFontToUnicode`-method, to extract the charCodes from those entries, however it turned out that that didn't actually help in this case (the mapping was still wrong).
To fix this I'm thus proposing that we fallback to the /ToUnicode map when no other useable data exists (e.g. no post-table), since it *hopefully* shouldn't make things any worse than leaving parts of the glyph map empty (which currently happens).
---
[1] As can be seem below, some of the entries are completely normal while others are non-standard:
```
Differences (array)
0 = 65
1 = /g5167
2 = /space
3 = /g11927
4 = /g17737
5 = /g11540
6 = /g2180
7 = /K
8 = /P
9 = /two
10 = /zero
11 = /one
12 = /five
13 = /four
14 = /g6932
15 = /g7246
16 = /g1691
17 = /g2343
18 = /g14792
19 = /g3325
20 = /g4280
21 = /g20383
22 = /g18166
23 = /g16988
24 = /g17943
25 = /g19223
26 = /g10830
27 = 97
28 = /g982
29 = /g1226
30 = /g5059
31 = /g2677
32 = /g1042
33 = /g11568
34 = /L
35 = /three
36 = /seven
37 = /g2364
38 = /g12063
39 = /g5356
40 = /g2173
41 = /g17877
42 = /g7273
43 = /g7647
44 = /g7224
45 = /g19327
46 = /g5054
47 = /g2342
48 = /g10136
49 = /g6856
50 = /g13381
51 = /g7257
52 = /g12093
53 = /g2359
```
Currently, in the `PartialEvaluator`, we only support Optional Content in Form-/XObjects. Hence this patch adds support for Image-/XObjects as well, which looks like a simple oversight in PR 12095 since the canvas-implementation already contains the necessary code to support this.
Bug 1721218 has a shading pattern that was used thousands of times.
To improve performance of this PDF:
- add a cache for patterns in the evaluator and only send the IR form once
to the main thread (this also makes caching in canvas easier)
- cache the created canvas radial/axial patterns
- for shading fill radial/axial use the pattern directly instead of creating temporary
canvas
Previously, when we filled image masks we didn't copy over the current transformation,
this caused patterns to be misaligned when painted. Now we create a temporary
canvas with the mask and have the transform copied over and offset it relative to
where the mask would be painted. We also weren't properly offsetting tiling patterns.
This isn't usually noticeable since patters repeat, but in the case of #13561 the pattern
is only drawn once and has to be in the correct position to line up with the mask image.
These fixes broke #11473, but highlighted that we were drawing that correctly by
accident and not correctly handling negative bounding boxes on tiling patterns.
Fixes#6297, #13561, #13441
Partially fixes#1344 (still blurry but boxes are in correct position now)
- when binding (after parsing) we get a map between some template nodes and some data nodes;
- so set user data in input handlers in using data node uids in the annotation storage;
- to save the form, just put the value we have in the storage in the correct data nodes, serialize the xml as a string and then write the string at the end of the pdf using src/core/writer.js;
- fix few bugs around data bindings:
- the "Off" issue in Bug 1716980.
Note, this only really fixes Radial/Axial shading patterns with masks.
I'm guessing tiling patterns and mesh patterns would also be broken
if applied like the test pdf. Hopefully I'll have some time to make
test cases for the other shadings.
Fixes#13372
For Type3 fonts where the /CharProcs-streams of the individual glyph starts with a `d1` operator, we can use that to build a fallback bounding box for the font and thus improve text-selection in some cases.
For HighlightAnnotations with a built-in appearance stream, we still rely on it to specify the opacity correctly via a suitable blend mode. However, if the Annotation-drawing operators are placed *within* a /XObject of the /Form-type, the /ExtGState won't apply to the final rendering and the result is that the highlighting obscures the underlying text.
The more *correct* and general solution would likely be to somehow modify the implementation in `src/display/canvas.js`, to special-case handling of /Form-type /XObjects when rendering Annotations. Since we can very easily work-around this problem for now by using the "no appearance stream" code-path, doing *something* here ought to be preferable.
This patch is (obviously) merely a work-around, but given that the referenced issue is (as far as I know) the first case we've seen of this problem a simple solution will hopefully suffice for now.
This fixes the colours, by respecting the strokeAlpha/fillAlpha-values, for a couple of Annotations in the PDF document from issue 13447.[1]
---
[1] Some of the annotations still won't render at all, when compared with Adobe Reader, but that could/should probably be handled separately.
- Right now, a glyph with an erroneous outline is replaced by an empty glyph
if the error is far enough from the start there's likely something to render
so the idea is to replace a command with args by an endchar when no args are
on the stack: this way OTS is likely happy (no remaining args on stack) and we
can draw something which is likely better than nothing.
Previously, we set the base transformation and pattern matrix
directly to the main rendering ctx of the page, however doing this
caused the current transform to be lost. This would cause issues
with things like shear missing so the pattern was misaligned or when
stroke was used the scale of the line width or dash would be wrong.
Instead we should leave the current transform and use setTransfrom
on the pattern so it is applied correctly. For axial and radial shadings I had
to create a temporary canvas to draw the shading so I could in turn
use setTransform.
Fixes: #13325, #6769, #7847, #11018, #11597, #11473
The following already in the corpus are improved:
issue8078-page1
issue1877-page1
Without this some *composite* fonts may incorrectly end up with matching `hash`es, thus breaking rendering since we'll not actually try to load/parse some of the fonts.
*Please note:* Given that the document, in the referenced issue, doesn't embed *any* of its fonts there's no guarantee that it renders correctly in all configurations even with this patch.
- app.alert and few other function can use an object as parameter ({cMsg: ...});
- support app.alert with a question and a yes/no answer;
- update field siblings when one is changed in an action;
- stop calculation if calculate is set to false in the middle of calculations;
- get a boolean for checkboxes when they've been set through annotationStorage instead of a string.
- but don't validate them for now;
- Firefox will display a bar to warn that the signature validation is not supported (see https://bugzilla.mozilla.org/show_bug.cgi?id=854315)
- almost all (all ?) pdf readers display signatures;
- validation is done in edge but for now it's behind a pref.
When a PDF is "marked" we now generate a separate DOM that represents
the structure tree from the PDF. This DOM is inserted into the <canvas>
element and allows screen readers to walk the tree and have more
information about headings, images, links, etc. To link the structure
tree DOM (which is empty) to the text layer aria-owns is used. This
required modifying the text layer creation so that marked items are
now tracked.
The fontName, as defined in the PDF document, cannot be found in *any* of the "name"-tables in the TrueType Collection font. To work-around that, this patch adds a *fallback* code-path to allow using an approximately matching fontName rather than outright failing.
Fixes#13107
In the issue, some TrueType glyph names have the format `uniXXXX`.
Font's `Encoding` dictionary has the entry `Differences` but no
`BaseEncoding`. `uniXXXX` names are converted to glyph indices
using font's `post` table but currently that is done only when
`BaseEncoding` exists. We must enable the conversion also when only
`Differences` exists.
This extends PR 13033 slightly, with a heuristic to support corrupt PDF documents where the `LineAnnotation`s have an empty /Rect-entry. Please note that while I have no idea if this is "correct", this patch at least makes us output the same /BBox as re-saving in Adobe Reader does.
- strokeColor corresponds to borderColor;
- support fillColor and textColor;
- support colors on the different annotations;
- fix typo in aforms (+test).
- Remove a *duplicated* reference test, see "issue12810", from the manifest.
- Improve the spelling in a couple of comments in `src/core/canvas.js`, most notable of the word "parallelogram".
- Update a comment, also in `src/core/canvas.js`, to actually agree with the value used to reduce confusion when reading the code.
While PR 12725 fixed bug 1671312 as reported, i.e. the "In the upper right corner "Purposes' has bad kerning."-part, it however broke other parts of the text rendering.
Note in particular the tables, e.g. on page 2 and beyond, where the glyphs are now rendered too close together. The reason for this is that the fonts in question are non-embedded ArialNarrow, which we just replace with Helvetica which obviously is not narrow. Given that the font replacement isn't a perfect fit for non-embedded ArialNarrow, we still need to re-measure the glyph widths in this case.
This patch is a rebased *and* refactored version of PR 9448, such that it applies cleanly given that `PDFFindController` has changed since that PR was opened; obviously keeping the original author information intact.
This patch will thus ensure that e.g. fractions, and other things that we normalize before searching, will still be highlighted correctly in the textLayer.
Furthermore, this patch also adds basic unit-tests for this functionality.
*Note:* The `[api-minor]` tag is added, since third-party implementations of the `PDFFindController` must now always use the `pageMatchesLength` property to get accurate length information (see the `web/text_layer_builder.js` changes).
Co-authored-by: Ross Johnson <ross@mazira.com>
Co-authored-by: Jonas Jenwald <jonas.jenwald@gmail.com>
* add a comment to explain how minimal linewidth is computed.
* when context.linewidth < 1 after transform, firefox and chrome
don't render in the same way (issue #12810).
* set lineWidth to 1 after transform and before stroking
- aims fix issue #12295
- a pixel can be transformed into a rectangle with both heights < 1.
A single rescale leads to a rectangle with dim equals to 1 and
the other to something greater than 1.
* change the way to render rectangle with null dimensions:
- right now we rely on the lineWidth set before "re" but
it can be set after "re" and before "S" and in this case the rendering
will be wrong.
- render such rectangles as a single line.
Given that the PDF document in the issue contains the same very large JPEG image *three* times, this patch includes a test-case where only the first page has been extracted from it.
Currently any errors thrown in `preEvaluateFont`, which is a *synchronous* method, will not be handled at all in the `loadFont` method and we were thus failing to return an `ErrorFont`-instance as intended here.
Also, add an *explicit* check in `PartialEvaluator.preEvaluateFont` to ensure that Type0-fonts always have a *valid* dictionary.
* the goal is to execute actions like Open or OpenAction
* can be tested with issue6106.pdf (auto-print)
* once #12701 is merged, we can add page actions
There doesn't seem to be anything definitive about this in
the spec, but from experimenting, it seems acrobat lets
PDFs override the widths of the standard fonts.
* remove 1st param of _createPopup (almost useless for a method)
* prepend popup div to avoid to have them on top of some highlights (and so "disable" partially mouse events)
* add a ref test for issue #12504
* in some pdf, there are actions with "event.source.hidden = ..."
* in order to handle visibility when printing, annotationStorage is extended to store multiple properties (value, hidden, editable, ...)
In issue 12120, the font has a 1,0 cmap and is marked symbolic which
according to the spec means we should directly use the cmap instead of
the extra steps that are defined in 9.6.6.4.
However, just fixing that caused bug 1057544 to break. The font in bug
1057544 has a 0,1 cmap (Unicode 1.1) which we were not using, but is
easy to support. We're also easily able to support some of the other
unicode cmaps, so I added those as well.
There was also a second issue with bug 1057544, the cmap doesn't have
a mapping for the "quoteright" glyph, but it is defined in the post
table. To handle this, I've moved post table as a fallback for any
font that has an encoding.
This is *similar* to the existing transfer function support for SMasks, but extended to simple image data.
Please note that the extra amount of data now being sent to the worker-thread, for affected /ExtGState entries, is limited to *at most* 4 `Uint8Array`s each with a length of 256 elements.
Refer to https://www.adobe.com/content/dam/acom/en/devnet/acrobat/pdfs/PDF32000_2008.pdf#G9.1658137 for additional details.
Some fonts have loca tables that aren't sorted or use 0 as an offset to
signal a missing glyph. This fixes the bad loca tables by sorting them
and then rewriting the loca table and potentially re-ordering the glyf
table to match.
Fixes#11131 and bug 1650302.
Issue 4398 was fixed by PR 4437, however a test-case wasn't included as far as I can tell. Given that PR 12186 is now in the process of re-factoring that code, adding a test-case cannot hurt as far as I'm concerned.
Add a new method to the API to get the optional content configuration. Add
a new render task param that accepts the above configuration.
For now, the optional content is not controllable by the user in
the viewer, but renders with the default configuration in the PDF.
All of the test files added exhibit different uses of optional content.
Fixes#269.
Fix test to work with optional content.
- Change the stopAtErrors test to ensure the operator list has something,
instead of asserting the exact number of operators.
This should reduce the possibility of accidentally truncating some inline images, while *not* causing the "EI" detection to become significantly slower.[1]
There's obviously a possibility that these added checks are not sufficient to catch *every* single case of "EI" sequences within the actual inline image data, but without specific test-cases I decided against over-engineering the solution here.
*Please note:* The interpolation issues are somewhat orthogonal to the main issue here, which is the truncated image, and it's already tracked elsewhere.
---
[1] I've looked at the issue a few times, and this is the first approach that I was able to come up with that didn't cause *unacceptable* performance regressions in e.g. issue 2618.
On ISO/IEC 10918-6:2013 (E), section 6.1: (http://www.itu.int/rec/T-REC-T.872-201206-I/en)
"Images encoded with three components are assumed to be RGB data encoded as YCbCr unless the image contains an APP14 marker segment as specified in 6.5.3, in which case the colour encoding is considered either RGB or YCbCr according to the application data of the APP14 marker segment"
But common jpeg libraries consider RGB too if components index are ASCII R (0x52), G (0x47) and B (0x42): https://stackoverflow.com/questions/50798014/determining-color-space-for-jpeg/50861048
Issue #11931
Currently image resources, as opposed to e.g. font resources, are handled exclusively on a page-specific basis. Generally speaking this makes sense, since pages are separate from each other, however there's PDF documents where many (or even all) pages actually references exactly the same image resources (through the XRef table). Hence, in some cases, we're decoding the *same* images over and over for every page which is obviously slow and wasting both CPU and memory resources better used elsewhere.[1]
Obviously we cannot simply treat all image resources as-if they're used throughout the entire PDF document, since that would end up increasing memory usage too much.[2]
However, by introducing a `GlobalImageCache` in the worker we can track image resources that appear on more than one page. Hence we can switch image resources from being page-specific to being document-specific, once the image resource has been seen on more than a certain number of pages.
In many cases, such as e.g. the referenced issue, this patch will thus lead to reduced memory usage for image resources. Scrolling through all pages of the document, there's now only a few main-thread copies of the same image data, as opposed to one for each rendered page (i.e. there could theoretically be *twenty* copies of the image data).
While this obviously benefit both CPU and memory usage in this case, for *very* large image data this patch *may* possibly increase persistent main-thread memory usage a tiny bit. Thus to avoid negatively affecting memory usage too much in general, particularly on the main-thread, the `GlobalImageCache` will *only* cache a certain number of image resources at the document level and simply fallback to the default behaviour.
Unfortunately the asynchronous nature of the code, with ranged/streamed loading of data, actually makes all of this much more complicated than if all data could be assumed to be immediately available.[3]
*Please note:* The patch will lead to *small* movement in some existing test-cases, since we're now using the built-in PDF.js JPEG decoder more. This was done in order to simplify the overall implementation, especially on the main-thread, by limiting it to only the `OPS.paintImageXObject` operator.
---
[1] There's e.g. PDF documents that use the same image as background on all pages.
[2] Given that data stored in the `commonObjs`, on the main-thread, are only cleared manually through `PDFDocumentProxy.cleanup`. This as opposed to data stored in the `objs` of each page, which is automatically removed when the page is cleaned-up e.g. by being evicted from the cache in the default viewer.
[3] If the latter case were true, we could simply check for repeat images *before* parsing started and thus avoid handling *any* duplicate image resources.
- Add a reduced test-case for issue 11768, to prevent future regressions.
(Given that PR 11769 is only a work-around, rather than a proper solution, it may not be entirely accurate for the issue to be closed as fixed.)
- Add more validation of the charCode, as found by the heuristics, in `PartialEvaluator._buildSimpleFontToUnicode` to prevent future issues.
At this point in time, compared to when the "ignore single-char" code was added, we *should* generally be doing a much better job of combining text into as few chunks as possible.
However, there's still bad cases where we're not able to combine text as much as one would like, which is why I'm *not* proposing to simply measure/scale all text. Instead this patch will to only measure/scale single-char text in cases where the horizontal/vertical scale is off significantly, since that's were you'd expect bad text-selection behaviour otherwise.
Note that most of the movement caused by this patch is with Type3 fonts, which is a somewhat special font type and one where our current text-selection behaviour is probably the least good.
Fixes#11718 in which the `ff` ligature glyph is at index zero in a CFF font. Beacuse this is a CIDFont, glyph names are CIDs, which are integers. Thus the string `".notdef"` is not correct. The rest of the charset data is already parsed correctly as integers when the boolean argument `cid` is true.
The /Differences array of the problematic font contains a `/c.1` entry, which is consequently detected as a *possible* Cdd{d}/cdd{d} glyphName by the existing heuristics.
Because of how the base 10 conversion is implemented, which is necessary for the base 16 special case, the parsed charCode becomes `0.1` thus causing `String.fromCodePoint` to throw since that obviously isn't a valid code point.
To fix the referenced issue, and to hopefully prevent similar ones in the future, the patch adds *additional* validation of the charCode found by the heuristics.
Fixes#11477
The PDF draws many space characters but the embedded fonts don't have a glyph named `space`, so `.notdef` should be drawn instead. PDF.js assumed that Type1 fonts define `.notdef` as the first glyph (index 0). However, now the fonts have the glyph `A` at index 0 and `.notdef` is the last one, so `A` appears where spaces are expected.
Because the rest of the font machinery in `core/fonts.js` assumes `.notdef` is at index zero, it's easiest to modify `core/type1_parser.js` so that it "repairs" fonts and makes sure `.notdef` is at index 0.
The PDF document in question is *corrupt*, since it contains multiple instances of incorrect operators.
We obviously don't want to slow down parsing of *all* documents (since most are valid), just to accommodate a particular bad PDF generator, hence the reason for the inline check before calling the `ensureStateFont` method.
