By invoking the `reset` methods *last* in the `Toolbar`/`SecondaryToolbar`-constructors, we ensure that the "toolbarreset"/"secondarytoolbarreset"-events are actually handle when the viewer loads. Note that previously those events were dispatched *before* the relevant event-listeners had been attached.
With this small change we can avoid inconsistent initial toolbar-state, specifically in the case when the viewer is *reloaded* (since Firefox keeps the HTML-state on "soft" reloads).
An annotation doesn't have to be in the text flow, hence it's likely a bad idea
to insert its text in the text layer. But the text must be visible from a screen
reader point of view so it must somewhere in the DOM.
So with this patch, the text from a FreeText annotation is extracted and added in
a div in its HTML counterpart, and with the patch #15237 the text should be visible
and positioned relatively to the text flow.
Given that this image is intended specifically for the default viewer, we simply use the CSS preprocessor to remove the image reference in the `gulp components` build.
Considering that the issue only affects a CSS file, I don't believe that replacing the *just released* PDF.js version is actually necessary here.
It doesn't make sense to use a page-canvas that's *smaller* than the resulting thumbnail, since that causes the image to be upscaled which results in a blurry thumbnail. Note that this doesn't normally happen, unless a very small zoom-level is used in the viewer.
To improve performance of the sidebar we use the page-canvases to generate the thumbnails whenever possible, since that avoids unnecessary re-rendering when the sidebar is open. This works generally well, however there's an old problem in PDF documents that contain interactive forms (when those are enabled): Note how the thumbnails become partially (or fully) blank, since those Annotations are not included in the OperatorList.[1]
We obviously want to keep using the `PDFThumbnailView.setImage`-method for most documents, however we need a way to skip it only for those pages that contain interactive forms.
As it turns out it's unfortunately not all that simple to tell, after the fact, from looking only at the OperatorList that some Annotations were skipped. While it might have been possible to try and infer that in the viewer, it'd not have been pretty considering that at the time when rendering finishes the annotationLayer has not yet been built.
The overall simplest solution that I could come up with, was instead to include a *summary* of the interactive form-state when doing the final "flushing" of the OperatorList and expose that information in the API.
---
[1] Some examples from our test-suite: `annotation-tx2.pdf` where the thumbnail is completely blank, and `bug1737260.pdf` where the thumbnail is missing the "buttons" found on the page.
Currently all of these factories take a bunch of (randomly ordered) parameters, which first of all doesn't look that nice in the `PDFPageView`-class when some parameters are optional.
Furthermore, it also makes deprecation/removal of any existing parameter a *potentially* breaking change.
Finally, using an Object will provide a small amount of "documentation" at the call-site which isn't really the case with a bunch of "regular" parameters.
Note that all of the `viewer component` examples still work as-is with this patch, which is why I don't believe that we necessarily have to deprecate in the usual fashion.
Rather than always disable `PDFThumbnailView.setImage` as soon as user has changed the visibility of the Optional Content, we can utilize the new method added in the previous patch to improve thumbnail performance. Note in particular how, in the old code, even *resetting* of the Optional Content to its default state wouldn't enable `PDFThumbnailView.setImage` again.
While slightly unrelated, this patch also removes the `PDFThumbnailViewer._optionalContentConfigPromise`-property since it's completely unused.
Given that the SVG back-end is not defined anywhere except in GENERIC builds, we can remove a bit more unnecessary code in e.g. the Firefox PDF Viewer.
The elements in the annotationEditor layer are rearranged to make them
more accessible, but we must draw them in the order they have been created,
hence this patch adds a z-index to the editors.
- This way, the keyboard callbacks are called even if the page has not
the focus, hence the user doesn't have to guess that they have to click
on the page which is a bit painful especially in Ink mode.
- Add two keyboard shortcuts to commit a Freetext editor (ctrl+enter and
escape).
- In the annotationEditorLayer, reorder the editors in the DOM according
the position of the elements on the screen;
- add an aria-owns attribute on the "nearest" element in the text layer
which points to the added editor.
Given that the SVG back-end is not defined anywhere except in GENERIC builds, we can remove a little bit more unnecessary code in e.g. the Firefox PDF Viewer.
Rather than including all of this external code in the PDF.js repository, we should be using the npm package instead.
Unfortunately this is slightly more complicated than you'd hope, since the `fit-curve` package (which is older) isn't directly compatible with modern JavaScript modules.
In particular, the following cases needed to be considered:
- For the development viewer (i.e. `gulp server`) and the unit-tests, we thus need to build a fitCurve-bundle that can be directly `import`ed.
- For the actual PDF.js build-targets, we can slightly reduce the sizes by depending on the "raw" `fit-curve` source-code.
- For the Node.js unit-tests, the `fit-curve` package can be used as-is.
- this way the context menu in Firefox can take into account what we
have in the clipboard, if an editor is selected, ...
- when the user will click on a context menu item, an action will be
triggered, hence this patch adds what is required to handle it;
- some tests will be added in the Firefox' patch.
Rather than forcing the user to *manually* call `setDimensions`, which is also breaking any existing third-party code, it seems that we can simply let the `AnnotationLayer.{render, update}`-methods handle that internally.
As far as I can tell, based on testing manually in the viewer *and* running the browser-tests, everything still appears to work correctly with this patch.
- Simplify how we look-up the DOM-element, which should also be a tiny bit more efficent.
- Use private class-fields, rather than property-names prefixed with underscores.
- Inline the `#updateBar` helper-method directly in the `percent`-setter, since having a separate method doesn't seem necessary in this case.
- Set the `indeterminate`-class on the ProgressBar DOM-element, to simplify the code.
Finally, also (slightly) re-factors the `PDFViewerApplication.progress`-method to make it a bit smaller.
- for example in Dusk theme (Windows 11), black appears to be white, so
the user will draw something in white. But if they want to print or
save the used color must be black.
- fix a bug with the color input which only accepts hex string colors;
- adjust outline color of the selected/hovered editors in HCM.
Now that it's possible to change the font-size, this placeholder string feels a little bit long (especially for larger font-sizes).
Given that Editing is not enabled/released yet, I hope that it should be fine to update this without changing the l10n-id.
This replaces the boolean `annotationEditorEnabled` option/preference with a "proper" `annotationEditorMode` one. This way it's not only possible for the user to control if Editing is enabled/disabled, but also which *specific* Editing-mode should become enabled upon PDF document load.
Given that Editing is not enabled/released yet, I cannot imagine that changing the name and type of the option/preference should be an issue.
Similar to other recent patches, see e.g. PR 15057, we don't want to add these kind of `id`s to DOM-elements since they shouldn't become "linkable" through the URL hash.
*Please note:* This patch can be tested, in the viewer, with e.g. `bug1737260.pdf` from the test-suite.
- As in the annotation layer, use percent instead of pixels as unit;
- handle the rotation of the editor layer in allowing editing when rotation
angle is not zero;
- the different editors are rotated counterclockwise in order to be usable
when the main page is itself rotated;
- add support for saving/printing rotated editors.
Given that printing is triggered *synchronously* in browsers, it's thus possible for scripting (in PDF documents) to modify the Annotation-data while printing is currently ongoing.
To work-around that we add a new printing-specific `AnnotationStorage`, where the serializable data is *frozen* upon initialization, which the viewer can thus create/utilize during printing.
For encrypted PDF documents without the required permissions set, this patch adds support for disabling of Annotation-editing. However, please note that it also requires that the `pdfjs.enablePermissions` preference is set to `true` (since PDF document permissions could be seen as user hostile).[1]
As I started looking at the issue, it soon became clear that *only* trying to fix the issue without slightly re-factor the surrounding code would be somewhat difficult.
The following is an overview of the changes in this patch; sorry about the size/scope of this!
- Use a new `AnnotationEditorUIManager`-instance *for each* PDF document opened in the GENERIC viewer, to prevent user-added Annotations from "leaking" from one document into the next.
- Re-factor the `BaseViewer.#initializePermissions`-method, to simplify handling of temporarily disabled modes (e.g. for both Annotation-rendering and Annotation-editing).
- When editing is enabled, let the Editor-buttons be `disabled` until the document has loaded. This way we avoid the buttons becoming clickable temporarily, for PDF documents that use permissions.
- Slightly re-factor how the Editor-buttons are shown/hidden in the viewer, and reset the toolbar-state when a new PDF document is opened.
- Flip the order of the Editor-buttons and the pre-exising toolbarButtons in the "toolbarViewerRight"-div. (To help reduce the size, a little bit, for the PR that adds new Editor-toolbars.)
- Enable editing by default in the development viewer, i.e. `gulp server`, since having to (repeatedly) do that manually becomes annoying after a while.
- Finally, support disabling of editing when `pdfjs.enablePermissions` is set; fixes issue 15049.
---
[1] Either manually with `about:config`, or using e.g. a [Group Policy](https://github.com/mozilla/policy-templates).
- each annotation has its coordinates/dimensions expressed in percentage,
hence it's correctly positioned whatever the scale factor is;
- the font sizes are expressed in percentage too and the main font size
is scaled thanks a css var (--scale-factor);
- the rotation is now applied on the div annotationLayer;
- this patch improve the rendering of some strings where the glyph spacing
was not correct (it's a Firefox bug);
- it helps to simplify the code and it should slightly improve the update of
page (on zoom or rotation).
We want to avoid adding regular `id`s to Annotation-elements, since that means that they become "linkable" through the URL hash in a way that's not supported/intended. This could end up clashing with "named destinations", and that could easily lead to bugs; see issue 11499 and PR 11503 for some context.
Rather than using `id`s, we'll instead use a *custom* `data-element-id` attribute such that it's still possible to access the Annotation-elements directly.
Unfortunately these changes required updating most of the integration-tests, and to reduce the amount of repeated code a couple of helper functions were added.
This option is not used, nor has it ever been used, in the *built-in* Firefox PDF Viewer. Hence we can define it only for the environments where it makes sense instead.
This should really have been done as part of PR 12470, since it's now possible to directly set the `defaultUrl`-option without having to fallback to `var`-usage.
- Right now, we must select the tool, then click to select a page and
click to start drawing and it's a bit painful;
- so just create a new ink editor when we're hovering a page without one.
Given that the SVG back-end is not defined anywhere except in GENERIC builds, we can remove a little bit of unnecessary code in e.g. the Firefox PDF Viewer.
Apparently the ESLint rule added in PR 15031 wasn't able to catch all cases that can be converted, which is probably not all that surprising given how some of these call-sites look.
- Use `Element.prepend()` to insert nodes before all other ones in the element, rather than using `firstChild` with `insertBefore`-calls; see https://developer.mozilla.org/en-US/docs/Web/API/Element/prepend
- Fix one *incorrect* `insertBefore` call, in the AnnotationLayer-code.
Initially the patch simply changed that to an `Element.before()`-call, however that broke one of the integration-tests. It turns out that the `index` may try to access a non-existent select-child, which triggers undefined behaviour; note the warning in https://developer.mozilla.org/en-US/docs/Web/API/Node/insertBefore#parameters
The update in https://bugzilla.mozilla.org/show_bug.cgi?id=1773794 failed, because the `editorNone` icon is identical to a pre-existing one. Given that all of the editor-icons are simply placeholders for now, we can just make a tiny change to the SVG-paths to prevent these kind of problems.
- Approximate the drawn curve by a set of Bezier curves in using
js code from https://github.com/soswow/fit-curves.
The code has been slightly modified in order to make the linter
happy.
Because of a capitalization error, the MIME type wasn't actually being set correctly. However, please note that downloading of font files still worked correctly which is probably why this has gone unnoticed since 2014.
Given the differences between XFA documents and "normal" PDF documents, we don't support editing of the former ones. Hence, when a XFA-document is opened, we temporarily disable the editor-buttons.
- Ensure that the modified-warning won't be displayed, when navigating away from the viewer, if the user has added custom Annotations and then *removed all* of them.
- Ensure that the *initial* editor-buttons state, i.e. the `toggled`-class, is correctly displayed in the toolbar when then viewer loads.
- Tweak the CSS-classes for the editor-buttons, such that they use the correct focus/hover-rules (similar to the sidebar-buttons).
- Remove a no longer accurate comment from the `BaseViewer.annotationEditorMode`-setter.
- Address a couple of *smaller* outstanding review comments, including some re-formatting changes, from PR 14976.
In PR 14710 we only included the JavaScript-part of the polyfill, however we probably need to include the CSS as well to reduce the risk of problems in older browsers.
With the recent CSS-related improvements in the `preprocess`-function we could probably have included this conditionally in the `viewer.css` file. However, considering that the `<dialog>` polyfill-code is only invoked when actually needed it seemed most appropriate/correct to lazy-load the polyfill-CSS as well.
- right now we're using the font size from the pdf itself but we use an other font
in the annotation layer. So this size doesn't really make sense and leads to bad
rendering (see pdf in #14928);
- use a sans-serif font for the fields containing text (fix issue #14736);
- remove useless padding in text-based fields (fix issue #14301);
- text fields allow/disallow scrolling bars (see bit 24 in Ff entry), so use this
value to hide/show scrollbars in annotation layer.
- it aims to fix https://bugzilla.mozilla.org/show_bug.cgi?id=1771477;
- hangul contains some syllables which are decomposed when using NFD, hence
the text must be correctly shifted in case it contains some of them.
Currently, when range-requests and/or streaming are not supported or for documents opened from `data`-URLs, we'll manually set the `contentDispositionFilename` (assuming it exists and is valid) from the `onOpenWithData`-callback in `PDFViewerApplication.initPassiveLoading`.
However, because of a small oversight in `PDFViewerApplication._initializeMetadata`, this *cached* `contentDispositionFilename` would be ignored and we'd only attempt to use the one returned by `PDFDocumentProxy.getMetadata` in the API (which in the cases outlined above will always be empty).
Also, to ensure that the document properties dialog always displays the *correct* fileName we'll now lookup it using the same exact method as in the viewer itself (via a new callback-function).
