2016-03-05 00:36:46 +09:00
|
|
|
/* Copyright 2016 Mozilla Foundation
|
|
|
|
*
|
|
|
|
* Licensed under the Apache License, Version 2.0 (the "License");
|
|
|
|
* you may not use this file except in compliance with the License.
|
|
|
|
* You may obtain a copy of the License at
|
|
|
|
*
|
|
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
*
|
|
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
|
|
* See the License for the specific language governing permissions and
|
|
|
|
* limitations under the License.
|
|
|
|
*/
|
Switch to using ESLint, instead of JSHint, for linting
*Please note that most of the necessary code adjustments were made in PR 7890.*
ESLint has a number of advantageous properties, compared to JSHint. Among those are:
- The ability to find subtle bugs, thanks to more rules (e.g. PR 7881).
- Much more customizable in general, and many rules allow fine-tuned behaviour rather than the just the on/off rules in JSHint.
- Many more rules that can help developers avoid bugs, and a lot of rules that can be used to enforce a consistent coding style. The latter should be particularily useful for new contributors (and reduce the amount of stylistic review comments necessary).
- The ability to easily specify exactly what rules to use/not to use, as opposed to JSHint which has a default set. *Note:* in future JSHint version some of the rules we depend on will be removed, according to warnings in http://jshint.com/docs/options/, so we wouldn't be able to update without losing lint coverage.
- More easily disable one, or more, rules temporarily. In JSHint this requires using a numeric code, which isn't very user friendly, whereas in ESLint the rule name is simply used instead.
By default there's no rules enabled in ESLint, but there are some default rule sets available. However, to prevent linting failures if we update ESLint in the future, it seemed easier to just explicitly specify what rules we want.
Obviously this makes the ESLint config file somewhat bigger than the old JSHint config file, but given how rarely that one has been updated over the years I don't think that matters too much.
I've tried, to the best of my ability, to ensure that we enable the same rules for ESLint that we had for JSHint. Furthermore, I've also enabled a number of rules that seemed to make sense, both to catch possible errors *and* various style guide violations.
Despite the ESLint README claiming that it's slower that JSHint, https://github.com/eslint/eslint#how-does-eslint-performance-compare-to-jshint, locally this patch actually reduces the runtime for `gulp` lint (by approximately 20-25%).
A couple of stylistic rules that would have been nice to enable, but where our code currently differs to much to make it feasible:
- `comma-dangle`, controls trailing commas in Objects and Arrays (among others).
- `object-curly-spacing`, controls spacing inside of Objects.
- `spaced-comment`, used to enforce spaces after `//` and `/*. (This is made difficult by the fact that there's still some usage of the old preprocessor left.)
Rules that I indend to look into possibly enabling in follow-ups, if it seems to make sense: `no-else-return`, `no-lonely-if`, `brace-style` with the `allowSingleLine` parameter removed.
Useful links:
- http://eslint.org/docs/user-guide/configuring
- http://eslint.org/docs/rules/
2016-12-15 23:52:29 +09:00
|
|
|
/* eslint-env node */
|
2017-04-28 20:40:47 +09:00
|
|
|
/* eslint-disable object-shorthand */
|
2016-03-05 00:36:46 +09:00
|
|
|
/* globals target */
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
"use strict";
|
|
|
|
|
|
|
|
var autoprefixer = require("autoprefixer");
|
2020-02-05 08:34:44 +09:00
|
|
|
var calc = require("postcss-calc");
|
Add support for CSS variables using the `PostCSS CSS Variables` package (issue 11462)
Having thought *briefly* about using `css-vars-ponyfill`, I'm no longer convinced that it'd be a good idea. The reason is that if we actually want to properly support CSS variables, then that functionality should be available in *all* of our CSS files.
Note in particular the `pdf_viewer.css` file that's built as part of the `COMPONENTS` target, in which case I really cannot see how a rewrite-at-the-client solution would ever be guaranteed to always work correctly and without accidentally touching other CSS in the surrounding application.
All-in-all, simply re-writing the CSS variables at build-time seems much easier and is thus the approach taken in this patch; courtesy of https://github.com/MadLittleMods/postcss-css-variables
By using its `preserve` option, the built files will thus include *both* a fallback and a modern `var(...)` format[1]. As a proof-of-concept this patch removes a couple of manually added fallback values, and converts an additional sidebar related property to use a CSS variable.
---
[1] Comparing the `master` branch with this patch, when using `gulp generic`, produces the following diff for the built `web/viewer.css` file:
```diff
@@ -408,6 +408,7 @@
:root {
--sidebar-width: 200px;
+ --sidebar-transition-duration: 200ms;
}
* {
@@ -550,27 +551,28 @@
position: absolute;
top: 32px;
bottom: 0;
- width: 200px; /* Here, and elsewhere below, keep the constant value for compatibility
- with older browsers that lack support for CSS variables. */
+ width: 200px;
width: var(--sidebar-width);
visibility: hidden;
z-index: 100;
border-top: 1px solid rgba(51, 51, 51, 1);
-webkit-transition-duration: 200ms;
transition-duration: 200ms;
+ -webkit-transition-duration: var(--sidebar-transition-duration);
+ transition-duration: var(--sidebar-transition-duration);
-webkit-transition-timing-function: ease;
transition-timing-function: ease;
}
html[dir='ltr'] #sidebarContainer {
-webkit-transition-property: left;
transition-property: left;
- left: -200px;
+ left: calc(-1 * 200px);
left: calc(-1 * var(--sidebar-width));
}
html[dir='rtl'] #sidebarContainer {
-webkit-transition-property: right;
transition-property: right;
- right: -200px;
+ right: calc(-1 * 200px);
right: calc(-1 * var(--sidebar-width));
}
@@ -640,6 +642,8 @@
#viewerContainer:not(.pdfPresentationMode) {
-webkit-transition-duration: 200ms;
transition-duration: 200ms;
+ -webkit-transition-duration: var(--sidebar-transition-duration);
+ transition-duration: var(--sidebar-transition-duration);
-webkit-transition-timing-function: ease;
transition-timing-function: ease;
}
```
2020-02-05 06:28:38 +09:00
|
|
|
var cssvariables = require("postcss-css-variables");
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var fancylog = require("fancy-log");
|
|
|
|
var fs = require("fs");
|
|
|
|
var gulp = require("gulp");
|
|
|
|
var postcss = require("gulp-postcss");
|
|
|
|
var rename = require("gulp-rename");
|
|
|
|
var replace = require("gulp-replace");
|
|
|
|
var mkdirp = require("mkdirp");
|
|
|
|
var path = require("path");
|
|
|
|
var rimraf = require("rimraf");
|
|
|
|
var stream = require("stream");
|
|
|
|
var exec = require("child_process").exec;
|
|
|
|
var spawn = require("child_process").spawn;
|
|
|
|
var spawnSync = require("child_process").spawnSync;
|
|
|
|
var streamqueue = require("streamqueue");
|
|
|
|
var merge = require("merge-stream");
|
|
|
|
var zip = require("gulp-zip");
|
|
|
|
var webpack2 = require("webpack");
|
|
|
|
var webpackStream = require("webpack-stream");
|
|
|
|
var Vinyl = require("vinyl");
|
|
|
|
var vfs = require("vinyl-fs");
|
|
|
|
var through = require("through2");
|
|
|
|
|
|
|
|
var BUILD_DIR = "build/";
|
|
|
|
var L10N_DIR = "l10n/";
|
|
|
|
var TEST_DIR = "test/";
|
|
|
|
var EXTENSION_SRC_DIR = "extensions/";
|
|
|
|
|
|
|
|
var BASELINE_DIR = BUILD_DIR + "baseline/";
|
|
|
|
var MOZCENTRAL_BASELINE_DIR = BUILD_DIR + "mozcentral.baseline/";
|
|
|
|
var GENERIC_DIR = BUILD_DIR + "generic/";
|
|
|
|
var COMPONENTS_DIR = BUILD_DIR + "components/";
|
|
|
|
var IMAGE_DECODERS_DIR = BUILD_DIR + "image_decoders";
|
|
|
|
var DEFAULT_PREFERENCES_DIR = BUILD_DIR + "default_preferences/";
|
|
|
|
var MINIFIED_DIR = BUILD_DIR + "minified/";
|
|
|
|
var JSDOC_BUILD_DIR = BUILD_DIR + "jsdoc/";
|
|
|
|
var GH_PAGES_DIR = BUILD_DIR + "gh-pages/";
|
|
|
|
var SRC_DIR = "src/";
|
|
|
|
var LIB_DIR = BUILD_DIR + "lib/";
|
|
|
|
var DIST_DIR = BUILD_DIR + "dist/";
|
|
|
|
var COMMON_WEB_FILES = ["web/images/*.{png,svg,gif,cur}", "web/debugger.js"];
|
|
|
|
var MOZCENTRAL_DIFF_FILE = "mozcentral.diff";
|
|
|
|
|
|
|
|
var REPO = "git@github.com:mozilla/pdf.js.git";
|
|
|
|
var DIST_REPO_URL = "https://github.com/mozilla/pdfjs-dist";
|
|
|
|
|
|
|
|
var builder = require("./external/builder/builder.js");
|
|
|
|
|
|
|
|
var CONFIG_FILE = "pdfjs.config";
|
2016-04-23 07:20:47 +09:00
|
|
|
var config = JSON.parse(fs.readFileSync(CONFIG_FILE).toString());
|
|
|
|
|
Add a `gulp image_decoders` command to allow packaging/distributing the image decoders (i.e. jpg.js, jpx.js, jbig2.js) separately from the main PDF.js library
Please note that the standalone `pdf.image_decoders.js` file will be including the complete `src/shared/util.js` file, despite only using parts of it.[1] This was done *purposely*, to not negatively impact the readability/maintainability of the core PDF.js code.
Furthermore, to ensure that the compatibility is the same in the regular PDF.js library *and* in the the standalone image decoders, `src/shared/compatibility.js` was included as well.
To (hopefully) prevent future complaints about the size of the built `pdf.image_decoders.js` file, a few existing async-related polyfills are being skipped (since all of the image decoders are completely synchronous).
Obviously this required adding a couple of pre-processor statements, but given that these are all limited to "compatibility" code, I think this might be OK!?
---
[1] However, please note that previous commits moved `PageViewport` and `MessageHandler` out of `src/shared/util.js` which reduced its size.
2018-05-16 20:49:26 +09:00
|
|
|
// Default Autoprefixer config used for generic, components, minified-pre
|
2018-04-04 21:51:29 +09:00
|
|
|
var AUTOPREFIXER_CONFIG = {
|
2019-10-16 20:06:11 +09:00
|
|
|
overrideBrowserslist: [
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
"last 2 versions",
|
|
|
|
"Chrome >= 49", // Last supported on Windows XP
|
|
|
|
"Firefox >= 52", // Last supported on Windows XP
|
|
|
|
"Firefox ESR",
|
|
|
|
"IE >= 11",
|
|
|
|
"Safari >= 9",
|
|
|
|
"> 0.5%",
|
|
|
|
"not dead",
|
2018-04-04 21:51:29 +09:00
|
|
|
],
|
|
|
|
};
|
Add support for CSS variables using the `PostCSS CSS Variables` package (issue 11462)
Having thought *briefly* about using `css-vars-ponyfill`, I'm no longer convinced that it'd be a good idea. The reason is that if we actually want to properly support CSS variables, then that functionality should be available in *all* of our CSS files.
Note in particular the `pdf_viewer.css` file that's built as part of the `COMPONENTS` target, in which case I really cannot see how a rewrite-at-the-client solution would ever be guaranteed to always work correctly and without accidentally touching other CSS in the surrounding application.
All-in-all, simply re-writing the CSS variables at build-time seems much easier and is thus the approach taken in this patch; courtesy of https://github.com/MadLittleMods/postcss-css-variables
By using its `preserve` option, the built files will thus include *both* a fallback and a modern `var(...)` format[1]. As a proof-of-concept this patch removes a couple of manually added fallback values, and converts an additional sidebar related property to use a CSS variable.
---
[1] Comparing the `master` branch with this patch, when using `gulp generic`, produces the following diff for the built `web/viewer.css` file:
```diff
@@ -408,6 +408,7 @@
:root {
--sidebar-width: 200px;
+ --sidebar-transition-duration: 200ms;
}
* {
@@ -550,27 +551,28 @@
position: absolute;
top: 32px;
bottom: 0;
- width: 200px; /* Here, and elsewhere below, keep the constant value for compatibility
- with older browsers that lack support for CSS variables. */
+ width: 200px;
width: var(--sidebar-width);
visibility: hidden;
z-index: 100;
border-top: 1px solid rgba(51, 51, 51, 1);
-webkit-transition-duration: 200ms;
transition-duration: 200ms;
+ -webkit-transition-duration: var(--sidebar-transition-duration);
+ transition-duration: var(--sidebar-transition-duration);
-webkit-transition-timing-function: ease;
transition-timing-function: ease;
}
html[dir='ltr'] #sidebarContainer {
-webkit-transition-property: left;
transition-property: left;
- left: -200px;
+ left: calc(-1 * 200px);
left: calc(-1 * var(--sidebar-width));
}
html[dir='rtl'] #sidebarContainer {
-webkit-transition-property: right;
transition-property: right;
- right: -200px;
+ right: calc(-1 * 200px);
right: calc(-1 * var(--sidebar-width));
}
@@ -640,6 +642,8 @@
#viewerContainer:not(.pdfPresentationMode) {
-webkit-transition-duration: 200ms;
transition-duration: 200ms;
+ -webkit-transition-duration: var(--sidebar-transition-duration);
+ transition-duration: var(--sidebar-transition-duration);
-webkit-transition-timing-function: ease;
transition-timing-function: ease;
}
```
2020-02-05 06:28:38 +09:00
|
|
|
var CSS_VARIABLES_CONFIG = {
|
|
|
|
preserve: true,
|
|
|
|
};
|
2018-04-04 21:51:29 +09:00
|
|
|
|
2016-04-23 07:20:47 +09:00
|
|
|
var DEFINES = {
|
|
|
|
PRODUCTION: true,
|
2018-06-12 00:25:50 +09:00
|
|
|
TESTING: false,
|
2016-04-23 07:20:47 +09:00
|
|
|
// The main build targets:
|
|
|
|
GENERIC: false,
|
|
|
|
MOZCENTRAL: false,
|
|
|
|
CHROME: false,
|
|
|
|
MINIFIED: false,
|
2017-03-14 01:35:33 +09:00
|
|
|
COMPONENTS: false,
|
2017-04-25 05:07:00 +09:00
|
|
|
LIB: false,
|
2017-10-16 01:42:15 +09:00
|
|
|
SKIP_BABEL: false,
|
Add a `gulp image_decoders` command to allow packaging/distributing the image decoders (i.e. jpg.js, jpx.js, jbig2.js) separately from the main PDF.js library
Please note that the standalone `pdf.image_decoders.js` file will be including the complete `src/shared/util.js` file, despite only using parts of it.[1] This was done *purposely*, to not negatively impact the readability/maintainability of the core PDF.js code.
Furthermore, to ensure that the compatibility is the same in the regular PDF.js library *and* in the the standalone image decoders, `src/shared/compatibility.js` was included as well.
To (hopefully) prevent future complaints about the size of the built `pdf.image_decoders.js` file, a few existing async-related polyfills are being skipped (since all of the image decoders are completely synchronous).
Obviously this required adding a couple of pre-processor statements, but given that these are all limited to "compatibility" code, I think this might be OK!?
---
[1] However, please note that previous commits moved `PageViewport` and `MessageHandler` out of `src/shared/util.js` which reduced its size.
2018-05-16 20:49:26 +09:00
|
|
|
IMAGE_DECODERS: false,
|
2016-04-23 07:20:47 +09:00
|
|
|
};
|
2016-03-05 00:36:46 +09:00
|
|
|
|
2019-11-13 11:51:31 +09:00
|
|
|
function transform(charEncoding, transformFunction) {
|
|
|
|
return through.obj(function(vinylFile, enc, done) {
|
|
|
|
var transformedFile = vinylFile.clone();
|
|
|
|
transformedFile.contents = Buffer.from(
|
|
|
|
transformFunction(transformedFile.contents),
|
|
|
|
charEncoding
|
|
|
|
);
|
|
|
|
done(null, transformedFile);
|
|
|
|
});
|
|
|
|
}
|
|
|
|
|
2017-04-28 06:21:26 +09:00
|
|
|
function safeSpawnSync(command, parameters, options) {
|
|
|
|
// Execute all commands in a shell.
|
|
|
|
options = options || {};
|
|
|
|
options.shell = true;
|
2017-05-03 22:17:31 +09:00
|
|
|
// `options.shell = true` requires parameters to be quoted.
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
parameters = parameters.map(param => {
|
2017-05-03 22:17:31 +09:00
|
|
|
if (!/[\s`~!#$*(){\[|\\;'"<>?]/.test(param)) {
|
|
|
|
return param;
|
|
|
|
}
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
return '"' + param.replace(/([$\\"`])/g, "\\$1") + '"';
|
2017-05-03 22:17:31 +09:00
|
|
|
});
|
2017-04-28 06:21:26 +09:00
|
|
|
|
|
|
|
var result = spawnSync(command, parameters, options);
|
|
|
|
if (result.status !== 0) {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log(
|
|
|
|
'Error: command "' +
|
|
|
|
command +
|
|
|
|
'" with parameters "' +
|
|
|
|
parameters +
|
|
|
|
'" exited with code ' +
|
|
|
|
result.status
|
|
|
|
);
|
2017-04-28 06:21:26 +09:00
|
|
|
process.exit(result.status);
|
|
|
|
}
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
2019-06-29 20:23:43 +09:00
|
|
|
function startNode(args, options) {
|
|
|
|
// Node.js decreased the maximum header size from 80 KB to 8 KB in newer
|
|
|
|
// releases, which is not sufficient for some of our reference test files
|
|
|
|
// (such as `issue6360.pdf`), so we need to restore this value. Note that
|
|
|
|
// this argument needs to be before all other arguments as it needs to be
|
|
|
|
// passed to the Node.js process itself and not to the script that it runs.
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
args.unshift("--max-http-header-size=80000");
|
|
|
|
return spawn("node", args, options);
|
2019-06-29 20:23:43 +09:00
|
|
|
}
|
|
|
|
|
2016-03-05 00:36:46 +09:00
|
|
|
function createStringSource(filename, content) {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var source = stream.Readable({ objectMode: true });
|
|
|
|
source._read = function() {
|
|
|
|
this.push(
|
|
|
|
new Vinyl({
|
|
|
|
path: filename,
|
|
|
|
contents: Buffer.from(content),
|
|
|
|
})
|
|
|
|
);
|
2016-03-05 00:36:46 +09:00
|
|
|
this.push(null);
|
|
|
|
};
|
|
|
|
return source;
|
|
|
|
}
|
|
|
|
|
2017-02-09 07:32:15 +09:00
|
|
|
function createWebpackConfig(defines, output) {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var path = require("path");
|
2017-02-09 07:32:15 +09:00
|
|
|
|
|
|
|
var versionInfo = getVersionJSON();
|
|
|
|
var bundleDefines = builder.merge(defines, {
|
|
|
|
BUNDLE_VERSION: versionInfo.version,
|
Fix the remaining cases of inconsistent spacing and trailing commas in objects, and enable the `comma-dangle` and `object-curly-spacing` ESLint rules
http://eslint.org/docs/rules/comma-dangle
http://eslint.org/docs/rules/object-curly-spacing
*Please note:* This patch was created automatically, using the ESLint `--fix` command line option. In a couple of places this caused lines to become too long, and I've fixed those manually; please refer to the interdiff below for the only hand-edits in this patch.
```diff
diff --git a/gulpfile.js b/gulpfile.js
index d18b9c58..7d47fd8d 100644
--- a/gulpfile.js
+++ b/gulpfile.js
@@ -1247,7 +1247,8 @@ gulp.task('gh-pages-git', ['gh-pages-prepare', 'wintersmith'], function () {
var reason = process.env['PDFJS_UPDATE_REASON'];
safeSpawnSync('git', ['init'], { cwd: GH_PAGES_DIR, });
- safeSpawnSync('git', ['remote', 'add', 'origin', REPO], { cwd: GH_PAGES_DIR, });
+ safeSpawnSync('git', ['remote', 'add', 'origin', REPO],
+ { cwd: GH_PAGES_DIR, });
safeSpawnSync('git', ['add', '-A'], { cwd: GH_PAGES_DIR, });
safeSpawnSync('git', [
'commit', '-am', 'gh-pages site created via gulpfile.js script',
```
2017-06-03 00:13:35 +09:00
|
|
|
BUNDLE_BUILD: versionInfo.commit,
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
TESTING: defines.TESTING || process.env["TESTING"] === "true",
|
2017-02-09 07:32:15 +09:00
|
|
|
});
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var licenseHeaderLibre = fs
|
|
|
|
.readFileSync("./src/license_header_libre.js")
|
|
|
|
.toString();
|
|
|
|
var enableSourceMaps =
|
|
|
|
!bundleDefines.MOZCENTRAL &&
|
|
|
|
!bundleDefines.CHROME &&
|
|
|
|
!bundleDefines.TESTING;
|
|
|
|
var skipBabel =
|
|
|
|
bundleDefines.SKIP_BABEL || process.env["SKIP_BABEL"] === "true";
|
2017-02-09 07:32:15 +09:00
|
|
|
|
2018-05-20 22:18:43 +09:00
|
|
|
// Required to expose e.g., the `window` object.
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
output.globalObject = "this";
|
2018-05-20 22:18:43 +09:00
|
|
|
|
2017-02-09 07:32:15 +09:00
|
|
|
return {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
mode: "none",
|
2017-02-09 07:32:15 +09:00
|
|
|
output: output,
|
2018-05-20 22:18:43 +09:00
|
|
|
performance: {
|
|
|
|
hints: false, // Disable messages about larger file sizes.
|
|
|
|
},
|
2017-02-09 07:32:15 +09:00
|
|
|
plugins: [
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
new webpack2.BannerPlugin({ banner: licenseHeaderLibre, raw: true }),
|
2017-02-09 07:32:15 +09:00
|
|
|
],
|
|
|
|
resolve: {
|
|
|
|
alias: {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
pdfjs: path.join(__dirname, "src"),
|
|
|
|
"pdfjs-web": path.join(__dirname, "web"),
|
|
|
|
"pdfjs-lib": path.join(__dirname, "web/pdfjs"),
|
Fix the remaining cases of inconsistent spacing and trailing commas in objects, and enable the `comma-dangle` and `object-curly-spacing` ESLint rules
http://eslint.org/docs/rules/comma-dangle
http://eslint.org/docs/rules/object-curly-spacing
*Please note:* This patch was created automatically, using the ESLint `--fix` command line option. In a couple of places this caused lines to become too long, and I've fixed those manually; please refer to the interdiff below for the only hand-edits in this patch.
```diff
diff --git a/gulpfile.js b/gulpfile.js
index d18b9c58..7d47fd8d 100644
--- a/gulpfile.js
+++ b/gulpfile.js
@@ -1247,7 +1247,8 @@ gulp.task('gh-pages-git', ['gh-pages-prepare', 'wintersmith'], function () {
var reason = process.env['PDFJS_UPDATE_REASON'];
safeSpawnSync('git', ['init'], { cwd: GH_PAGES_DIR, });
- safeSpawnSync('git', ['remote', 'add', 'origin', REPO], { cwd: GH_PAGES_DIR, });
+ safeSpawnSync('git', ['remote', 'add', 'origin', REPO],
+ { cwd: GH_PAGES_DIR, });
safeSpawnSync('git', ['add', '-A'], { cwd: GH_PAGES_DIR, });
safeSpawnSync('git', [
'commit', '-am', 'gh-pages site created via gulpfile.js script',
```
2017-06-03 00:13:35 +09:00
|
|
|
},
|
2017-02-09 07:32:15 +09:00
|
|
|
},
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
devtool: enableSourceMaps ? "source-map" : undefined,
|
2017-02-09 07:32:15 +09:00
|
|
|
module: {
|
2018-05-20 22:18:43 +09:00
|
|
|
rules: [
|
2017-03-06 23:42:48 +09:00
|
|
|
{
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
loader: "babel-loader",
|
2019-09-24 04:55:55 +09:00
|
|
|
// `core-js` (see https://github.com/zloirock/core-js/issues/514),
|
|
|
|
// `web-streams-polyfill` (already using a transpiled file), and
|
2019-09-15 23:43:50 +09:00
|
|
|
// `src/core/{glyphlist,unicode}.js` (Babel is too slow for those)
|
|
|
|
// should be excluded from processing.
|
2019-09-24 04:55:55 +09:00
|
|
|
exclude: /(node_modules[\\\/]core-js|node_modules[\\\/]web-streams-polyfill|src[\\\/]core[\\\/](glyphlist|unicode))/,
|
2017-03-06 23:42:48 +09:00
|
|
|
options: {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
presets: skipBabel ? undefined : ["@babel/preset-env"],
|
2018-07-30 20:58:09 +09:00
|
|
|
plugins: [
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
"@babel/plugin-transform-modules-commonjs",
|
|
|
|
[
|
|
|
|
"@babel/plugin-transform-runtime",
|
|
|
|
{
|
|
|
|
helpers: false,
|
|
|
|
regenerator: true,
|
|
|
|
},
|
|
|
|
],
|
2018-07-30 20:58:09 +09:00
|
|
|
],
|
Fix the remaining cases of inconsistent spacing and trailing commas in objects, and enable the `comma-dangle` and `object-curly-spacing` ESLint rules
http://eslint.org/docs/rules/comma-dangle
http://eslint.org/docs/rules/object-curly-spacing
*Please note:* This patch was created automatically, using the ESLint `--fix` command line option. In a couple of places this caused lines to become too long, and I've fixed those manually; please refer to the interdiff below for the only hand-edits in this patch.
```diff
diff --git a/gulpfile.js b/gulpfile.js
index d18b9c58..7d47fd8d 100644
--- a/gulpfile.js
+++ b/gulpfile.js
@@ -1247,7 +1247,8 @@ gulp.task('gh-pages-git', ['gh-pages-prepare', 'wintersmith'], function () {
var reason = process.env['PDFJS_UPDATE_REASON'];
safeSpawnSync('git', ['init'], { cwd: GH_PAGES_DIR, });
- safeSpawnSync('git', ['remote', 'add', 'origin', REPO], { cwd: GH_PAGES_DIR, });
+ safeSpawnSync('git', ['remote', 'add', 'origin', REPO],
+ { cwd: GH_PAGES_DIR, });
safeSpawnSync('git', ['add', '-A'], { cwd: GH_PAGES_DIR, });
safeSpawnSync('git', [
'commit', '-am', 'gh-pages site created via gulpfile.js script',
```
2017-06-03 00:13:35 +09:00
|
|
|
},
|
2017-03-06 23:42:48 +09:00
|
|
|
},
|
2017-02-09 07:32:15 +09:00
|
|
|
{
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
loader: path.join(__dirname, "external/webpack/pdfjsdev-loader.js"),
|
2017-02-09 07:32:15 +09:00
|
|
|
options: {
|
|
|
|
rootPath: __dirname,
|
2017-02-09 07:35:58 +09:00
|
|
|
saveComments: false,
|
Fix the remaining cases of inconsistent spacing and trailing commas in objects, and enable the `comma-dangle` and `object-curly-spacing` ESLint rules
http://eslint.org/docs/rules/comma-dangle
http://eslint.org/docs/rules/object-curly-spacing
*Please note:* This patch was created automatically, using the ESLint `--fix` command line option. In a couple of places this caused lines to become too long, and I've fixed those manually; please refer to the interdiff below for the only hand-edits in this patch.
```diff
diff --git a/gulpfile.js b/gulpfile.js
index d18b9c58..7d47fd8d 100644
--- a/gulpfile.js
+++ b/gulpfile.js
@@ -1247,7 +1247,8 @@ gulp.task('gh-pages-git', ['gh-pages-prepare', 'wintersmith'], function () {
var reason = process.env['PDFJS_UPDATE_REASON'];
safeSpawnSync('git', ['init'], { cwd: GH_PAGES_DIR, });
- safeSpawnSync('git', ['remote', 'add', 'origin', REPO], { cwd: GH_PAGES_DIR, });
+ safeSpawnSync('git', ['remote', 'add', 'origin', REPO],
+ { cwd: GH_PAGES_DIR, });
safeSpawnSync('git', ['add', '-A'], { cwd: GH_PAGES_DIR, });
safeSpawnSync('git', [
'commit', '-am', 'gh-pages site created via gulpfile.js script',
```
2017-06-03 00:13:35 +09:00
|
|
|
defines: bundleDefines,
|
|
|
|
},
|
2017-03-06 23:42:48 +09:00
|
|
|
},
|
Fix the remaining cases of inconsistent spacing and trailing commas in objects, and enable the `comma-dangle` and `object-curly-spacing` ESLint rules
http://eslint.org/docs/rules/comma-dangle
http://eslint.org/docs/rules/object-curly-spacing
*Please note:* This patch was created automatically, using the ESLint `--fix` command line option. In a couple of places this caused lines to become too long, and I've fixed those manually; please refer to the interdiff below for the only hand-edits in this patch.
```diff
diff --git a/gulpfile.js b/gulpfile.js
index d18b9c58..7d47fd8d 100644
--- a/gulpfile.js
+++ b/gulpfile.js
@@ -1247,7 +1247,8 @@ gulp.task('gh-pages-git', ['gh-pages-prepare', 'wintersmith'], function () {
var reason = process.env['PDFJS_UPDATE_REASON'];
safeSpawnSync('git', ['init'], { cwd: GH_PAGES_DIR, });
- safeSpawnSync('git', ['remote', 'add', 'origin', REPO], { cwd: GH_PAGES_DIR, });
+ safeSpawnSync('git', ['remote', 'add', 'origin', REPO],
+ { cwd: GH_PAGES_DIR, });
safeSpawnSync('git', ['add', '-A'], { cwd: GH_PAGES_DIR, });
safeSpawnSync('git', [
'commit', '-am', 'gh-pages site created via gulpfile.js script',
```
2017-06-03 00:13:35 +09:00
|
|
|
],
|
|
|
|
},
|
2017-07-09 22:19:16 +09:00
|
|
|
// Avoid shadowing actual Node.js variables with polyfills, by disabling
|
|
|
|
// polyfills/mocks - https://webpack.js.org/configuration/node/
|
2017-09-30 04:42:31 +09:00
|
|
|
node: false,
|
2017-02-09 07:32:15 +09:00
|
|
|
};
|
|
|
|
}
|
|
|
|
|
|
|
|
function webpack2Stream(config) {
|
|
|
|
// Replacing webpack1 to webpack2 in the webpack-stream.
|
|
|
|
return webpackStream(config, webpack2);
|
2016-04-23 07:20:47 +09:00
|
|
|
}
|
|
|
|
|
2017-02-07 23:53:33 +09:00
|
|
|
function getVersionJSON() {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
return JSON.parse(fs.readFileSync(BUILD_DIR + "version.json").toString());
|
2017-02-07 23:53:33 +09:00
|
|
|
}
|
|
|
|
|
2016-05-12 07:58:17 +09:00
|
|
|
function checkChromePreferencesFile(chromePrefsPath, webPrefsPath) {
|
|
|
|
var chromePrefs = JSON.parse(fs.readFileSync(chromePrefsPath).toString());
|
|
|
|
var chromePrefsKeys = Object.keys(chromePrefs.properties);
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
chromePrefsKeys = chromePrefsKeys.filter(function(key) {
|
2018-02-17 09:09:17 +09:00
|
|
|
var description = chromePrefs.properties[key].description;
|
|
|
|
// Deprecated keys are allowed in the managed preferences file.
|
|
|
|
// The code maintained is responsible for adding migration logic to
|
|
|
|
// extensions/chromium/options/migration.js and web/chromecom.js .
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
return !description || !description.startsWith("DEPRECATED.");
|
2018-02-17 09:09:17 +09:00
|
|
|
});
|
2016-05-12 07:58:17 +09:00
|
|
|
chromePrefsKeys.sort();
|
|
|
|
var webPrefs = JSON.parse(fs.readFileSync(webPrefsPath).toString());
|
|
|
|
var webPrefsKeys = Object.keys(webPrefs);
|
|
|
|
webPrefsKeys.sort();
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var telemetryIndex = chromePrefsKeys.indexOf("disableTelemetry");
|
2016-05-29 23:44:50 +09:00
|
|
|
if (telemetryIndex >= 0) {
|
|
|
|
chromePrefsKeys.splice(telemetryIndex, 1);
|
|
|
|
} else {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log("Warning: disableTelemetry key not found in chrome prefs!");
|
2016-05-29 23:44:50 +09:00
|
|
|
return false;
|
|
|
|
}
|
2016-05-12 07:58:17 +09:00
|
|
|
if (webPrefsKeys.length !== chromePrefsKeys.length) {
|
|
|
|
return false;
|
|
|
|
}
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
return webPrefsKeys.every(function(value, index) {
|
|
|
|
return (
|
|
|
|
chromePrefsKeys[index] === value &&
|
|
|
|
chromePrefs.properties[value].default === webPrefs[value]
|
|
|
|
);
|
2016-05-12 07:58:17 +09:00
|
|
|
});
|
|
|
|
}
|
|
|
|
|
2017-02-09 07:32:15 +09:00
|
|
|
function replaceWebpackRequire() {
|
|
|
|
// Produced bundles can be rebundled again, avoid collisions (e.g. in api.js)
|
|
|
|
// by renaming __webpack_require__ to something else.
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
return replace("__webpack_require__", "__w_pdfjs_require__");
|
2016-04-23 07:20:47 +09:00
|
|
|
}
|
|
|
|
|
2018-03-16 05:49:28 +09:00
|
|
|
function replaceJSRootName(amdName, jsName) {
|
2017-02-09 07:48:37 +09:00
|
|
|
// Saving old-style JS module name.
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
return replace(
|
|
|
|
'root["' + amdName + '"] = factory()',
|
|
|
|
'root["' + amdName + '"] = root.' + jsName + " = factory()"
|
|
|
|
);
|
2017-02-09 07:48:37 +09:00
|
|
|
}
|
|
|
|
|
2016-04-23 07:20:47 +09:00
|
|
|
function createBundle(defines) {
|
|
|
|
console.log();
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log("### Bundling files into pdf.js");
|
2016-04-23 07:20:47 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var mainAMDName = "pdfjs-dist/build/pdf";
|
|
|
|
var mainOutputName = "pdf.js";
|
2016-04-23 07:20:47 +09:00
|
|
|
|
2017-02-09 07:32:15 +09:00
|
|
|
var mainFileConfig = createWebpackConfig(defines, {
|
|
|
|
filename: mainOutputName,
|
|
|
|
library: mainAMDName,
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
libraryTarget: "umd",
|
Fix the remaining cases of inconsistent spacing and trailing commas in objects, and enable the `comma-dangle` and `object-curly-spacing` ESLint rules
http://eslint.org/docs/rules/comma-dangle
http://eslint.org/docs/rules/object-curly-spacing
*Please note:* This patch was created automatically, using the ESLint `--fix` command line option. In a couple of places this caused lines to become too long, and I've fixed those manually; please refer to the interdiff below for the only hand-edits in this patch.
```diff
diff --git a/gulpfile.js b/gulpfile.js
index d18b9c58..7d47fd8d 100644
--- a/gulpfile.js
+++ b/gulpfile.js
@@ -1247,7 +1247,8 @@ gulp.task('gh-pages-git', ['gh-pages-prepare', 'wintersmith'], function () {
var reason = process.env['PDFJS_UPDATE_REASON'];
safeSpawnSync('git', ['init'], { cwd: GH_PAGES_DIR, });
- safeSpawnSync('git', ['remote', 'add', 'origin', REPO], { cwd: GH_PAGES_DIR, });
+ safeSpawnSync('git', ['remote', 'add', 'origin', REPO],
+ { cwd: GH_PAGES_DIR, });
safeSpawnSync('git', ['add', '-A'], { cwd: GH_PAGES_DIR, });
safeSpawnSync('git', [
'commit', '-am', 'gh-pages site created via gulpfile.js script',
```
2017-06-03 00:13:35 +09:00
|
|
|
umdNamedDefine: true,
|
2017-02-09 07:32:15 +09:00
|
|
|
});
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var mainOutput = gulp
|
|
|
|
.src("./src/pdf.js")
|
2017-02-09 07:32:15 +09:00
|
|
|
.pipe(webpack2Stream(mainFileConfig))
|
2017-02-09 07:48:37 +09:00
|
|
|
.pipe(replaceWebpackRequire())
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
.pipe(replaceJSRootName(mainAMDName, "pdfjsLib"));
|
2017-02-09 07:32:15 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var workerAMDName = "pdfjs-dist/build/pdf.worker";
|
|
|
|
var workerOutputName = "pdf.worker.js";
|
2017-02-09 07:32:15 +09:00
|
|
|
|
|
|
|
var workerFileConfig = createWebpackConfig(defines, {
|
|
|
|
filename: workerOutputName,
|
|
|
|
library: workerAMDName,
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
libraryTarget: "umd",
|
Fix the remaining cases of inconsistent spacing and trailing commas in objects, and enable the `comma-dangle` and `object-curly-spacing` ESLint rules
http://eslint.org/docs/rules/comma-dangle
http://eslint.org/docs/rules/object-curly-spacing
*Please note:* This patch was created automatically, using the ESLint `--fix` command line option. In a couple of places this caused lines to become too long, and I've fixed those manually; please refer to the interdiff below for the only hand-edits in this patch.
```diff
diff --git a/gulpfile.js b/gulpfile.js
index d18b9c58..7d47fd8d 100644
--- a/gulpfile.js
+++ b/gulpfile.js
@@ -1247,7 +1247,8 @@ gulp.task('gh-pages-git', ['gh-pages-prepare', 'wintersmith'], function () {
var reason = process.env['PDFJS_UPDATE_REASON'];
safeSpawnSync('git', ['init'], { cwd: GH_PAGES_DIR, });
- safeSpawnSync('git', ['remote', 'add', 'origin', REPO], { cwd: GH_PAGES_DIR, });
+ safeSpawnSync('git', ['remote', 'add', 'origin', REPO],
+ { cwd: GH_PAGES_DIR, });
safeSpawnSync('git', ['add', '-A'], { cwd: GH_PAGES_DIR, });
safeSpawnSync('git', [
'commit', '-am', 'gh-pages site created via gulpfile.js script',
```
2017-06-03 00:13:35 +09:00
|
|
|
umdNamedDefine: true,
|
2017-02-09 07:32:15 +09:00
|
|
|
});
|
2018-03-16 05:49:28 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var workerOutput = gulp
|
|
|
|
.src("./src/pdf.worker.js")
|
2017-02-09 07:32:15 +09:00
|
|
|
.pipe(webpack2Stream(workerFileConfig))
|
2017-02-09 07:48:37 +09:00
|
|
|
.pipe(replaceWebpackRequire())
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
.pipe(replaceJSRootName(workerAMDName, "pdfjsWorker"));
|
2017-02-09 07:32:15 +09:00
|
|
|
return merge([mainOutput, workerOutput]);
|
2016-04-23 07:20:47 +09:00
|
|
|
}
|
|
|
|
|
|
|
|
function createWebBundle(defines) {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var viewerOutputName = "viewer.js";
|
2016-04-23 07:20:47 +09:00
|
|
|
|
2017-02-09 07:32:15 +09:00
|
|
|
var viewerFileConfig = createWebpackConfig(defines, {
|
Fix the remaining cases of inconsistent spacing and trailing commas in objects, and enable the `comma-dangle` and `object-curly-spacing` ESLint rules
http://eslint.org/docs/rules/comma-dangle
http://eslint.org/docs/rules/object-curly-spacing
*Please note:* This patch was created automatically, using the ESLint `--fix` command line option. In a couple of places this caused lines to become too long, and I've fixed those manually; please refer to the interdiff below for the only hand-edits in this patch.
```diff
diff --git a/gulpfile.js b/gulpfile.js
index d18b9c58..7d47fd8d 100644
--- a/gulpfile.js
+++ b/gulpfile.js
@@ -1247,7 +1247,8 @@ gulp.task('gh-pages-git', ['gh-pages-prepare', 'wintersmith'], function () {
var reason = process.env['PDFJS_UPDATE_REASON'];
safeSpawnSync('git', ['init'], { cwd: GH_PAGES_DIR, });
- safeSpawnSync('git', ['remote', 'add', 'origin', REPO], { cwd: GH_PAGES_DIR, });
+ safeSpawnSync('git', ['remote', 'add', 'origin', REPO],
+ { cwd: GH_PAGES_DIR, });
safeSpawnSync('git', ['add', '-A'], { cwd: GH_PAGES_DIR, });
safeSpawnSync('git', [
'commit', '-am', 'gh-pages site created via gulpfile.js script',
```
2017-06-03 00:13:35 +09:00
|
|
|
filename: viewerOutputName,
|
2017-02-09 07:32:15 +09:00
|
|
|
});
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
return gulp.src("./web/viewer.js").pipe(webpack2Stream(viewerFileConfig));
|
2017-02-09 07:32:15 +09:00
|
|
|
}
|
|
|
|
|
|
|
|
function createComponentsBundle(defines) {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var componentsAMDName = "pdfjs-dist/web/pdf_viewer";
|
|
|
|
var componentsOutputName = "pdf_viewer.js";
|
2017-02-09 07:32:15 +09:00
|
|
|
|
|
|
|
var componentsFileConfig = createWebpackConfig(defines, {
|
|
|
|
filename: componentsOutputName,
|
|
|
|
library: componentsAMDName,
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
libraryTarget: "umd",
|
Fix the remaining cases of inconsistent spacing and trailing commas in objects, and enable the `comma-dangle` and `object-curly-spacing` ESLint rules
http://eslint.org/docs/rules/comma-dangle
http://eslint.org/docs/rules/object-curly-spacing
*Please note:* This patch was created automatically, using the ESLint `--fix` command line option. In a couple of places this caused lines to become too long, and I've fixed those manually; please refer to the interdiff below for the only hand-edits in this patch.
```diff
diff --git a/gulpfile.js b/gulpfile.js
index d18b9c58..7d47fd8d 100644
--- a/gulpfile.js
+++ b/gulpfile.js
@@ -1247,7 +1247,8 @@ gulp.task('gh-pages-git', ['gh-pages-prepare', 'wintersmith'], function () {
var reason = process.env['PDFJS_UPDATE_REASON'];
safeSpawnSync('git', ['init'], { cwd: GH_PAGES_DIR, });
- safeSpawnSync('git', ['remote', 'add', 'origin', REPO], { cwd: GH_PAGES_DIR, });
+ safeSpawnSync('git', ['remote', 'add', 'origin', REPO],
+ { cwd: GH_PAGES_DIR, });
safeSpawnSync('git', ['add', '-A'], { cwd: GH_PAGES_DIR, });
safeSpawnSync('git', [
'commit', '-am', 'gh-pages site created via gulpfile.js script',
```
2017-06-03 00:13:35 +09:00
|
|
|
umdNamedDefine: true,
|
2017-02-09 07:32:15 +09:00
|
|
|
});
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
return gulp
|
|
|
|
.src("./web/pdf_viewer.component.js")
|
2017-02-09 07:32:15 +09:00
|
|
|
.pipe(webpack2Stream(componentsFileConfig))
|
2017-02-09 07:48:37 +09:00
|
|
|
.pipe(replaceWebpackRequire())
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
.pipe(replaceJSRootName(componentsAMDName, "pdfjsViewer"));
|
2016-04-23 07:20:47 +09:00
|
|
|
}
|
|
|
|
|
Add a `gulp image_decoders` command to allow packaging/distributing the image decoders (i.e. jpg.js, jpx.js, jbig2.js) separately from the main PDF.js library
Please note that the standalone `pdf.image_decoders.js` file will be including the complete `src/shared/util.js` file, despite only using parts of it.[1] This was done *purposely*, to not negatively impact the readability/maintainability of the core PDF.js code.
Furthermore, to ensure that the compatibility is the same in the regular PDF.js library *and* in the the standalone image decoders, `src/shared/compatibility.js` was included as well.
To (hopefully) prevent future complaints about the size of the built `pdf.image_decoders.js` file, a few existing async-related polyfills are being skipped (since all of the image decoders are completely synchronous).
Obviously this required adding a couple of pre-processor statements, but given that these are all limited to "compatibility" code, I think this might be OK!?
---
[1] However, please note that previous commits moved `PageViewport` and `MessageHandler` out of `src/shared/util.js` which reduced its size.
2018-05-16 20:49:26 +09:00
|
|
|
function createImageDecodersBundle(defines) {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var imageDecodersAMDName = "pdfjs-dist/image_decoders/pdf.image_decoders";
|
|
|
|
var imageDecodersOutputName = "pdf.image_decoders.js";
|
Add a `gulp image_decoders` command to allow packaging/distributing the image decoders (i.e. jpg.js, jpx.js, jbig2.js) separately from the main PDF.js library
Please note that the standalone `pdf.image_decoders.js` file will be including the complete `src/shared/util.js` file, despite only using parts of it.[1] This was done *purposely*, to not negatively impact the readability/maintainability of the core PDF.js code.
Furthermore, to ensure that the compatibility is the same in the regular PDF.js library *and* in the the standalone image decoders, `src/shared/compatibility.js` was included as well.
To (hopefully) prevent future complaints about the size of the built `pdf.image_decoders.js` file, a few existing async-related polyfills are being skipped (since all of the image decoders are completely synchronous).
Obviously this required adding a couple of pre-processor statements, but given that these are all limited to "compatibility" code, I think this might be OK!?
---
[1] However, please note that previous commits moved `PageViewport` and `MessageHandler` out of `src/shared/util.js` which reduced its size.
2018-05-16 20:49:26 +09:00
|
|
|
|
|
|
|
var componentsFileConfig = createWebpackConfig(defines, {
|
|
|
|
filename: imageDecodersOutputName,
|
|
|
|
library: imageDecodersAMDName,
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
libraryTarget: "umd",
|
Add a `gulp image_decoders` command to allow packaging/distributing the image decoders (i.e. jpg.js, jpx.js, jbig2.js) separately from the main PDF.js library
Please note that the standalone `pdf.image_decoders.js` file will be including the complete `src/shared/util.js` file, despite only using parts of it.[1] This was done *purposely*, to not negatively impact the readability/maintainability of the core PDF.js code.
Furthermore, to ensure that the compatibility is the same in the regular PDF.js library *and* in the the standalone image decoders, `src/shared/compatibility.js` was included as well.
To (hopefully) prevent future complaints about the size of the built `pdf.image_decoders.js` file, a few existing async-related polyfills are being skipped (since all of the image decoders are completely synchronous).
Obviously this required adding a couple of pre-processor statements, but given that these are all limited to "compatibility" code, I think this might be OK!?
---
[1] However, please note that previous commits moved `PageViewport` and `MessageHandler` out of `src/shared/util.js` which reduced its size.
2018-05-16 20:49:26 +09:00
|
|
|
umdNamedDefine: true,
|
|
|
|
});
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
return gulp
|
|
|
|
.src("./src/pdf.image_decoders.js")
|
Add a `gulp image_decoders` command to allow packaging/distributing the image decoders (i.e. jpg.js, jpx.js, jbig2.js) separately from the main PDF.js library
Please note that the standalone `pdf.image_decoders.js` file will be including the complete `src/shared/util.js` file, despite only using parts of it.[1] This was done *purposely*, to not negatively impact the readability/maintainability of the core PDF.js code.
Furthermore, to ensure that the compatibility is the same in the regular PDF.js library *and* in the the standalone image decoders, `src/shared/compatibility.js` was included as well.
To (hopefully) prevent future complaints about the size of the built `pdf.image_decoders.js` file, a few existing async-related polyfills are being skipped (since all of the image decoders are completely synchronous).
Obviously this required adding a couple of pre-processor statements, but given that these are all limited to "compatibility" code, I think this might be OK!?
---
[1] However, please note that previous commits moved `PageViewport` and `MessageHandler` out of `src/shared/util.js` which reduced its size.
2018-05-16 20:49:26 +09:00
|
|
|
.pipe(webpack2Stream(componentsFileConfig))
|
|
|
|
.pipe(replaceWebpackRequire())
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
.pipe(replaceJSRootName(imageDecodersAMDName, "pdfjsImageDecoders"));
|
Add a `gulp image_decoders` command to allow packaging/distributing the image decoders (i.e. jpg.js, jpx.js, jbig2.js) separately from the main PDF.js library
Please note that the standalone `pdf.image_decoders.js` file will be including the complete `src/shared/util.js` file, despite only using parts of it.[1] This was done *purposely*, to not negatively impact the readability/maintainability of the core PDF.js code.
Furthermore, to ensure that the compatibility is the same in the regular PDF.js library *and* in the the standalone image decoders, `src/shared/compatibility.js` was included as well.
To (hopefully) prevent future complaints about the size of the built `pdf.image_decoders.js` file, a few existing async-related polyfills are being skipped (since all of the image decoders are completely synchronous).
Obviously this required adding a couple of pre-processor statements, but given that these are all limited to "compatibility" code, I think this might be OK!?
---
[1] However, please note that previous commits moved `PageViewport` and `MessageHandler` out of `src/shared/util.js` which reduced its size.
2018-05-16 20:49:26 +09:00
|
|
|
}
|
|
|
|
|
2016-05-02 23:58:29 +09:00
|
|
|
function checkFile(path) {
|
|
|
|
try {
|
|
|
|
var stat = fs.lstatSync(path);
|
|
|
|
return stat.isFile();
|
|
|
|
} catch (e) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2017-01-11 02:50:38 +09:00
|
|
|
function checkDir(path) {
|
|
|
|
try {
|
|
|
|
var stat = fs.lstatSync(path);
|
|
|
|
return stat.isDirectory();
|
|
|
|
} catch (e) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2017-04-15 04:28:46 +09:00
|
|
|
function replaceInFile(path, find, replacement) {
|
|
|
|
var content = fs.readFileSync(path).toString();
|
|
|
|
content = content.replace(find, replacement);
|
|
|
|
fs.writeFileSync(path, content);
|
|
|
|
}
|
|
|
|
|
2017-02-04 23:19:46 +09:00
|
|
|
function getTempFile(prefix, suffix) {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
mkdirp.sync(BUILD_DIR + "tmp/");
|
|
|
|
var bytes = require("crypto")
|
|
|
|
.randomBytes(6)
|
|
|
|
.toString("hex");
|
|
|
|
var path = BUILD_DIR + "tmp/" + prefix + bytes + suffix;
|
|
|
|
fs.writeFileSync(path, "");
|
2017-02-04 23:19:46 +09:00
|
|
|
return path;
|
|
|
|
}
|
|
|
|
|
2018-08-04 09:48:47 +09:00
|
|
|
function createTestSource(testsName, bot) {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var source = stream.Readable({ objectMode: true });
|
2019-05-10 19:54:06 +09:00
|
|
|
source._read = function() {
|
2016-05-02 23:58:29 +09:00
|
|
|
console.log();
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log("### Running " + testsName + " tests");
|
|
|
|
|
|
|
|
var PDF_TEST = process.env["PDF_TEST"] || "test_manifest.json";
|
|
|
|
var PDF_BROWSERS =
|
|
|
|
process.env["PDF_BROWSERS"] ||
|
|
|
|
"resources/browser_manifests/browser_manifest.json";
|
|
|
|
|
|
|
|
if (!checkFile("test/" + PDF_BROWSERS)) {
|
|
|
|
console.log(
|
|
|
|
"Browser manifest file test/" + PDF_BROWSERS + " does not exist."
|
|
|
|
);
|
|
|
|
console.log(
|
2019-12-26 04:03:46 +09:00
|
|
|
"Copy and adjust the example in test/resources/browser_manifests."
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
);
|
|
|
|
this.emit("error", new Error("Missing manifest file"));
|
2016-05-02 23:58:29 +09:00
|
|
|
return null;
|
|
|
|
}
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var args = ["test.js"];
|
2016-05-02 23:58:29 +09:00
|
|
|
switch (testsName) {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
case "browser":
|
|
|
|
args.push("--reftest", "--manifestFile=" + PDF_TEST);
|
2016-05-02 23:58:29 +09:00
|
|
|
break;
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
case "browser (no reftest)":
|
|
|
|
args.push("--manifestFile=" + PDF_TEST);
|
2016-05-02 23:58:29 +09:00
|
|
|
break;
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
case "unit":
|
|
|
|
args.push("--unitTest");
|
2016-05-02 23:58:29 +09:00
|
|
|
break;
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
case "font":
|
|
|
|
args.push("--fontTest");
|
2016-05-02 23:58:29 +09:00
|
|
|
break;
|
|
|
|
default:
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
this.emit("error", new Error("Unknown name: " + testsName));
|
2016-05-02 23:58:29 +09:00
|
|
|
return null;
|
|
|
|
}
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
args.push("--browserManifestFile=" + PDF_BROWSERS);
|
2018-08-04 09:48:47 +09:00
|
|
|
if (bot) {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
args.push("--strictVerify");
|
2018-08-04 09:48:47 +09:00
|
|
|
}
|
2016-05-02 23:58:29 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var testProcess = startNode(args, { cwd: TEST_DIR, stdio: "inherit" });
|
|
|
|
testProcess.on("close", function(code) {
|
2016-05-02 23:58:29 +09:00
|
|
|
source.push(null);
|
|
|
|
});
|
2019-05-10 19:54:06 +09:00
|
|
|
return undefined;
|
2016-05-02 23:58:29 +09:00
|
|
|
};
|
|
|
|
return source;
|
|
|
|
}
|
|
|
|
|
2018-08-04 09:48:47 +09:00
|
|
|
function makeRef(done, bot) {
|
2017-02-25 08:12:02 +09:00
|
|
|
console.log();
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log("### Creating reference images");
|
2017-02-25 08:12:02 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var PDF_BROWSERS =
|
|
|
|
process.env["PDF_BROWSERS"] ||
|
|
|
|
"resources/browser_manifests/browser_manifest.json";
|
2017-02-25 08:12:02 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
if (!checkFile("test/" + PDF_BROWSERS)) {
|
|
|
|
console.log(
|
|
|
|
"Browser manifest file test/" + PDF_BROWSERS + " does not exist."
|
|
|
|
);
|
|
|
|
console.log(
|
2019-12-26 04:03:46 +09:00
|
|
|
"Copy and adjust the example in test/resources/browser_manifests."
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
);
|
|
|
|
done(new Error("Missing manifest file"));
|
2017-02-25 08:12:02 +09:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var args = ["test.js", "--masterMode"];
|
2018-08-04 09:48:47 +09:00
|
|
|
if (bot) {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
args.push("--noPrompts", "--strictVerify");
|
2017-02-25 08:12:02 +09:00
|
|
|
}
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
args.push("--browserManifestFile=" + PDF_BROWSERS);
|
|
|
|
var testProcess = startNode(args, { cwd: TEST_DIR, stdio: "inherit" });
|
|
|
|
testProcess.on("close", function(code) {
|
2017-02-25 08:12:02 +09:00
|
|
|
done();
|
|
|
|
});
|
|
|
|
}
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task("default", function(done) {
|
|
|
|
console.log("Available tasks:");
|
2018-11-19 02:33:23 +09:00
|
|
|
var tasks = Object.keys(gulp.registry().tasks());
|
2016-03-05 00:36:46 +09:00
|
|
|
tasks.sort();
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
tasks.forEach(function(taskName) {
|
|
|
|
console.log(" " + taskName);
|
2016-03-05 00:36:46 +09:00
|
|
|
});
|
2018-11-19 02:33:23 +09:00
|
|
|
done();
|
2016-03-05 00:36:46 +09:00
|
|
|
});
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task("buildnumber", function(done) {
|
2016-04-23 07:20:47 +09:00
|
|
|
console.log();
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log("### Getting extension build number");
|
2016-04-23 07:20:47 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
exec("git log --format=oneline " + config.baseVersion + "..", function(
|
|
|
|
err,
|
|
|
|
stdout,
|
|
|
|
stderr
|
|
|
|
) {
|
2016-04-23 07:20:47 +09:00
|
|
|
var buildNumber = 0;
|
|
|
|
if (!err) {
|
|
|
|
// Build number is the number of commits since base version
|
|
|
|
buildNumber = stdout ? stdout.match(/\n/g).length : 0;
|
2018-06-30 01:22:10 +09:00
|
|
|
} else {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log("This is not a Git repository; using default build number.");
|
2016-04-23 07:20:47 +09:00
|
|
|
}
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log("Extension build number: " + buildNumber);
|
2016-04-23 07:20:47 +09:00
|
|
|
|
|
|
|
var version = config.versionPrefix + buildNumber;
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
exec('git log --format="%h" -n 1', function(err, stdout, stderr) {
|
|
|
|
var buildCommit = "";
|
2016-04-23 07:20:47 +09:00
|
|
|
if (!err) {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
buildCommit = stdout.replace("\n", "");
|
2016-04-23 07:20:47 +09:00
|
|
|
}
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
createStringSource(
|
|
|
|
"version.json",
|
|
|
|
JSON.stringify(
|
|
|
|
{
|
|
|
|
version: version,
|
|
|
|
build: buildNumber,
|
|
|
|
commit: buildCommit,
|
|
|
|
},
|
|
|
|
null,
|
|
|
|
2
|
|
|
|
)
|
|
|
|
)
|
2016-04-23 07:20:47 +09:00
|
|
|
.pipe(gulp.dest(BUILD_DIR))
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
.on("end", done);
|
2016-04-23 07:20:47 +09:00
|
|
|
});
|
|
|
|
});
|
|
|
|
});
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task("default_preferences-pre", function() {
|
2019-02-13 22:00:23 +09:00
|
|
|
console.log();
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log("### Building `default_preferences.json`");
|
2019-02-13 22:00:23 +09:00
|
|
|
|
|
|
|
// Refer to the comment in the 'lib' task below.
|
|
|
|
function babelPluginReplaceNonWebPackRequire(babel) {
|
|
|
|
return {
|
|
|
|
visitor: {
|
|
|
|
Identifier(path, state) {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
if (path.node.name === "__non_webpack_require__") {
|
|
|
|
path.replaceWith(babel.types.identifier("require"));
|
2019-02-13 22:00:23 +09:00
|
|
|
}
|
|
|
|
},
|
|
|
|
},
|
|
|
|
};
|
|
|
|
}
|
|
|
|
function preprocess(content) {
|
|
|
|
content = preprocessor2.preprocessPDFJSCode(ctx, content);
|
|
|
|
return babel.transform(content, {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
sourceType: "module",
|
2019-02-13 22:00:23 +09:00
|
|
|
presets: undefined, // SKIP_BABEL
|
|
|
|
plugins: [
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
"@babel/plugin-transform-modules-commonjs",
|
2019-02-13 22:00:23 +09:00
|
|
|
babelPluginReplaceNonWebPackRequire,
|
|
|
|
],
|
|
|
|
}).code;
|
|
|
|
}
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var babel = require("@babel/core");
|
2019-02-13 22:00:23 +09:00
|
|
|
var ctx = {
|
|
|
|
rootPath: __dirname,
|
|
|
|
saveComments: false,
|
|
|
|
defines: builder.merge(DEFINES, {
|
|
|
|
GENERIC: true,
|
|
|
|
LIB: true,
|
|
|
|
BUNDLE_VERSION: 0, // Dummy version
|
|
|
|
BUNDLE_BUILD: 0, // Dummy build
|
|
|
|
}),
|
|
|
|
map: {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
"pdfjs-lib": "../pdf",
|
2019-02-13 22:00:23 +09:00
|
|
|
},
|
|
|
|
};
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var preprocessor2 = require("./external/builder/preprocessor2.js");
|
2019-09-24 04:55:55 +09:00
|
|
|
return merge([
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.src(
|
|
|
|
[
|
|
|
|
"src/{display,shared}/*.js",
|
|
|
|
"!src/shared/{cffStandardStrings,fonts_utils}.js",
|
|
|
|
"src/pdf.js",
|
|
|
|
],
|
|
|
|
{ base: "src/" }
|
|
|
|
),
|
|
|
|
gulp.src(["web/*.js", "!web/{app,pdfjs,preferences,viewer}.js"], {
|
|
|
|
base: ".",
|
|
|
|
}),
|
|
|
|
])
|
|
|
|
.pipe(transform("utf8", preprocess))
|
|
|
|
.pipe(gulp.dest(DEFAULT_PREFERENCES_DIR + "lib/"));
|
2019-02-13 22:00:23 +09:00
|
|
|
});
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task(
|
|
|
|
"default_preferences",
|
|
|
|
gulp.series("default_preferences-pre", function(done) {
|
|
|
|
var AppOptionsLib = require("./" +
|
|
|
|
DEFAULT_PREFERENCES_DIR +
|
|
|
|
"lib/web/app_options.js");
|
|
|
|
var AppOptions = AppOptionsLib.AppOptions;
|
|
|
|
var OptionKind = AppOptionsLib.OptionKind;
|
|
|
|
|
|
|
|
createStringSource(
|
|
|
|
"default_preferences.json",
|
|
|
|
JSON.stringify(AppOptions.getAll(OptionKind.PREFERENCE), null, 2)
|
|
|
|
)
|
|
|
|
.pipe(gulp.dest(BUILD_DIR))
|
|
|
|
.on("end", done);
|
|
|
|
})
|
|
|
|
);
|
|
|
|
|
|
|
|
gulp.task("locale", function() {
|
|
|
|
var VIEWER_LOCALE_OUTPUT = "web/locale/";
|
2017-01-11 02:50:38 +09:00
|
|
|
|
|
|
|
console.log();
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log("### Building localization files");
|
2017-01-11 02:50:38 +09:00
|
|
|
|
|
|
|
rimraf.sync(VIEWER_LOCALE_OUTPUT);
|
|
|
|
mkdirp.sync(VIEWER_LOCALE_OUTPUT);
|
|
|
|
|
|
|
|
var subfolders = fs.readdirSync(L10N_DIR);
|
|
|
|
subfolders.sort();
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var viewerOutput = "";
|
2017-01-11 02:50:38 +09:00
|
|
|
var locales = [];
|
|
|
|
for (var i = 0; i < subfolders.length; i++) {
|
|
|
|
var locale = subfolders[i];
|
|
|
|
var path = L10N_DIR + locale;
|
|
|
|
if (!checkDir(path)) {
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
if (!/^[a-z][a-z]([a-z])?(-[A-Z][A-Z])?$/.test(locale)) {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log("Skipping invalid locale: " + locale);
|
2017-01-11 02:50:38 +09:00
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
mkdirp.sync(VIEWER_LOCALE_OUTPUT + "/" + locale);
|
2017-01-11 02:50:38 +09:00
|
|
|
|
|
|
|
locales.push(locale);
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
if (checkFile(path + "/viewer.properties")) {
|
|
|
|
viewerOutput +=
|
|
|
|
"[" +
|
|
|
|
locale +
|
|
|
|
"]\n" +
|
|
|
|
"@import url(" +
|
|
|
|
locale +
|
|
|
|
"/viewer.properties)\n\n";
|
2017-01-11 02:50:38 +09:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return merge([
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
createStringSource("locale.properties", viewerOutput).pipe(
|
|
|
|
gulp.dest(VIEWER_LOCALE_OUTPUT)
|
|
|
|
),
|
|
|
|
gulp
|
2019-12-26 04:03:46 +09:00
|
|
|
.src(L10N_DIR + "/{" + locales.join(",") + "}/viewer.properties", {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
base: L10N_DIR,
|
|
|
|
})
|
2017-01-11 02:50:38 +09:00
|
|
|
.pipe(gulp.dest(VIEWER_LOCALE_OUTPUT)),
|
|
|
|
]);
|
|
|
|
});
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task("cmaps", function(done) {
|
|
|
|
var CMAP_INPUT = "external/cmaps";
|
|
|
|
var VIEWER_CMAP_OUTPUT = "external/bcmaps";
|
2017-01-11 02:50:38 +09:00
|
|
|
|
|
|
|
console.log();
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log("### Building cmaps");
|
2017-01-11 02:50:38 +09:00
|
|
|
|
|
|
|
// Testing a file that usually present.
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
if (!checkFile(CMAP_INPUT + "/UniJIS-UCS2-H")) {
|
|
|
|
console.log("./external/cmaps has no cmap files, download them from:");
|
|
|
|
console.log(" https://github.com/adobe-type-tools/cmap-resources");
|
|
|
|
throw new Error("cmap files were not found");
|
2017-01-11 02:50:38 +09:00
|
|
|
}
|
|
|
|
|
|
|
|
// Remove old bcmap files.
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
fs.readdirSync(VIEWER_CMAP_OUTPUT).forEach(function(file) {
|
2017-01-11 02:50:38 +09:00
|
|
|
if (/\.bcmap$/i.test(file)) {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
fs.unlinkSync(VIEWER_CMAP_OUTPUT + "/" + file);
|
2017-01-11 02:50:38 +09:00
|
|
|
}
|
|
|
|
});
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var compressCmaps = require("./external/cmapscompress/compress.js")
|
|
|
|
.compressCmaps;
|
2017-01-11 02:50:38 +09:00
|
|
|
compressCmaps(CMAP_INPUT, VIEWER_CMAP_OUTPUT, true);
|
2018-11-19 02:33:23 +09:00
|
|
|
done();
|
2017-01-11 02:50:38 +09:00
|
|
|
});
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task(
|
|
|
|
"bundle",
|
|
|
|
gulp.series("buildnumber", function() {
|
|
|
|
return createBundle(DEFINES).pipe(gulp.dest(BUILD_DIR));
|
|
|
|
})
|
|
|
|
);
|
2016-04-23 07:20:47 +09:00
|
|
|
|
2017-02-04 23:19:46 +09:00
|
|
|
function preprocessCSS(source, mode, defines, cleanup) {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var outName = getTempFile("~preprocess", ".css");
|
2017-04-29 02:47:20 +09:00
|
|
|
builder.preprocessCSS(mode, source, outName);
|
2017-02-04 23:19:46 +09:00
|
|
|
var out = fs.readFileSync(outName).toString();
|
|
|
|
fs.unlinkSync(outName);
|
|
|
|
if (cleanup) {
|
|
|
|
// Strip out all license headers in the middle.
|
|
|
|
var reg = /\n\/\* Copyright(.|\n)*?Mozilla Foundation(.|\n)*?\*\//g;
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
out = out.replace(reg, "");
|
2017-02-04 23:19:46 +09:00
|
|
|
}
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var i = source.lastIndexOf("/");
|
2017-02-04 23:19:46 +09:00
|
|
|
return createStringSource(source.substr(i + 1), out);
|
|
|
|
}
|
|
|
|
|
|
|
|
function preprocessHTML(source, defines) {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var outName = getTempFile("~preprocess", ".html");
|
2017-04-29 02:47:20 +09:00
|
|
|
builder.preprocess(source, outName, defines);
|
2017-02-04 23:19:46 +09:00
|
|
|
var out = fs.readFileSync(outName).toString();
|
|
|
|
fs.unlinkSync(outName);
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var i = source.lastIndexOf("/");
|
2017-02-04 23:19:46 +09:00
|
|
|
return createStringSource(source.substr(i + 1), out);
|
|
|
|
}
|
|
|
|
|
|
|
|
// Builds the generic production viewer that should be compatible with most
|
|
|
|
// modern HTML5 browsers.
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task(
|
|
|
|
"generic",
|
|
|
|
gulp.series("buildnumber", "default_preferences", "locale", function() {
|
|
|
|
console.log();
|
|
|
|
console.log("### Creating generic viewer");
|
|
|
|
var defines = builder.merge(DEFINES, { GENERIC: true });
|
|
|
|
|
|
|
|
rimraf.sync(GENERIC_DIR);
|
|
|
|
|
|
|
|
return merge([
|
|
|
|
createBundle(defines).pipe(gulp.dest(GENERIC_DIR + "build")),
|
|
|
|
createWebBundle(defines).pipe(gulp.dest(GENERIC_DIR + "web")),
|
|
|
|
gulp
|
|
|
|
.src(COMMON_WEB_FILES, { base: "web/" })
|
|
|
|
.pipe(gulp.dest(GENERIC_DIR + "web")),
|
|
|
|
gulp.src("LICENSE").pipe(gulp.dest(GENERIC_DIR)),
|
|
|
|
gulp
|
|
|
|
.src(
|
|
|
|
["web/locale/*/viewer.properties", "web/locale/locale.properties"],
|
|
|
|
{ base: "web/" }
|
|
|
|
)
|
|
|
|
.pipe(gulp.dest(GENERIC_DIR + "web")),
|
|
|
|
gulp
|
|
|
|
.src(["external/bcmaps/*.bcmap", "external/bcmaps/LICENSE"], {
|
|
|
|
base: "external/bcmaps",
|
|
|
|
})
|
|
|
|
.pipe(gulp.dest(GENERIC_DIR + "web/cmaps")),
|
|
|
|
preprocessHTML("web/viewer.html", defines).pipe(
|
|
|
|
gulp.dest(GENERIC_DIR + "web")
|
|
|
|
),
|
|
|
|
preprocessCSS("web/viewer.css", "generic", defines, true)
|
Add support for CSS variables using the `PostCSS CSS Variables` package (issue 11462)
Having thought *briefly* about using `css-vars-ponyfill`, I'm no longer convinced that it'd be a good idea. The reason is that if we actually want to properly support CSS variables, then that functionality should be available in *all* of our CSS files.
Note in particular the `pdf_viewer.css` file that's built as part of the `COMPONENTS` target, in which case I really cannot see how a rewrite-at-the-client solution would ever be guaranteed to always work correctly and without accidentally touching other CSS in the surrounding application.
All-in-all, simply re-writing the CSS variables at build-time seems much easier and is thus the approach taken in this patch; courtesy of https://github.com/MadLittleMods/postcss-css-variables
By using its `preserve` option, the built files will thus include *both* a fallback and a modern `var(...)` format[1]. As a proof-of-concept this patch removes a couple of manually added fallback values, and converts an additional sidebar related property to use a CSS variable.
---
[1] Comparing the `master` branch with this patch, when using `gulp generic`, produces the following diff for the built `web/viewer.css` file:
```diff
@@ -408,6 +408,7 @@
:root {
--sidebar-width: 200px;
+ --sidebar-transition-duration: 200ms;
}
* {
@@ -550,27 +551,28 @@
position: absolute;
top: 32px;
bottom: 0;
- width: 200px; /* Here, and elsewhere below, keep the constant value for compatibility
- with older browsers that lack support for CSS variables. */
+ width: 200px;
width: var(--sidebar-width);
visibility: hidden;
z-index: 100;
border-top: 1px solid rgba(51, 51, 51, 1);
-webkit-transition-duration: 200ms;
transition-duration: 200ms;
+ -webkit-transition-duration: var(--sidebar-transition-duration);
+ transition-duration: var(--sidebar-transition-duration);
-webkit-transition-timing-function: ease;
transition-timing-function: ease;
}
html[dir='ltr'] #sidebarContainer {
-webkit-transition-property: left;
transition-property: left;
- left: -200px;
+ left: calc(-1 * 200px);
left: calc(-1 * var(--sidebar-width));
}
html[dir='rtl'] #sidebarContainer {
-webkit-transition-property: right;
transition-property: right;
- right: -200px;
+ right: calc(-1 * 200px);
right: calc(-1 * var(--sidebar-width));
}
@@ -640,6 +642,8 @@
#viewerContainer:not(.pdfPresentationMode) {
-webkit-transition-duration: 200ms;
transition-duration: 200ms;
+ -webkit-transition-duration: var(--sidebar-transition-duration);
+ transition-duration: var(--sidebar-transition-duration);
-webkit-transition-timing-function: ease;
transition-timing-function: ease;
}
```
2020-02-05 06:28:38 +09:00
|
|
|
.pipe(
|
|
|
|
postcss([
|
|
|
|
cssvariables(CSS_VARIABLES_CONFIG),
|
2020-02-05 08:34:44 +09:00
|
|
|
calc(),
|
Add support for CSS variables using the `PostCSS CSS Variables` package (issue 11462)
Having thought *briefly* about using `css-vars-ponyfill`, I'm no longer convinced that it'd be a good idea. The reason is that if we actually want to properly support CSS variables, then that functionality should be available in *all* of our CSS files.
Note in particular the `pdf_viewer.css` file that's built as part of the `COMPONENTS` target, in which case I really cannot see how a rewrite-at-the-client solution would ever be guaranteed to always work correctly and without accidentally touching other CSS in the surrounding application.
All-in-all, simply re-writing the CSS variables at build-time seems much easier and is thus the approach taken in this patch; courtesy of https://github.com/MadLittleMods/postcss-css-variables
By using its `preserve` option, the built files will thus include *both* a fallback and a modern `var(...)` format[1]. As a proof-of-concept this patch removes a couple of manually added fallback values, and converts an additional sidebar related property to use a CSS variable.
---
[1] Comparing the `master` branch with this patch, when using `gulp generic`, produces the following diff for the built `web/viewer.css` file:
```diff
@@ -408,6 +408,7 @@
:root {
--sidebar-width: 200px;
+ --sidebar-transition-duration: 200ms;
}
* {
@@ -550,27 +551,28 @@
position: absolute;
top: 32px;
bottom: 0;
- width: 200px; /* Here, and elsewhere below, keep the constant value for compatibility
- with older browsers that lack support for CSS variables. */
+ width: 200px;
width: var(--sidebar-width);
visibility: hidden;
z-index: 100;
border-top: 1px solid rgba(51, 51, 51, 1);
-webkit-transition-duration: 200ms;
transition-duration: 200ms;
+ -webkit-transition-duration: var(--sidebar-transition-duration);
+ transition-duration: var(--sidebar-transition-duration);
-webkit-transition-timing-function: ease;
transition-timing-function: ease;
}
html[dir='ltr'] #sidebarContainer {
-webkit-transition-property: left;
transition-property: left;
- left: -200px;
+ left: calc(-1 * 200px);
left: calc(-1 * var(--sidebar-width));
}
html[dir='rtl'] #sidebarContainer {
-webkit-transition-property: right;
transition-property: right;
- right: -200px;
+ right: calc(-1 * 200px);
right: calc(-1 * var(--sidebar-width));
}
@@ -640,6 +642,8 @@
#viewerContainer:not(.pdfPresentationMode) {
-webkit-transition-duration: 200ms;
transition-duration: 200ms;
+ -webkit-transition-duration: var(--sidebar-transition-duration);
+ transition-duration: var(--sidebar-transition-duration);
-webkit-transition-timing-function: ease;
transition-timing-function: ease;
}
```
2020-02-05 06:28:38 +09:00
|
|
|
autoprefixer(AUTOPREFIXER_CONFIG),
|
|
|
|
])
|
|
|
|
)
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
.pipe(gulp.dest(GENERIC_DIR + "web")),
|
|
|
|
|
|
|
|
gulp
|
|
|
|
.src("web/compressed.tracemonkey-pldi-09.pdf")
|
|
|
|
.pipe(gulp.dest(GENERIC_DIR + "web")),
|
|
|
|
]);
|
|
|
|
})
|
|
|
|
);
|
|
|
|
|
|
|
|
gulp.task(
|
|
|
|
"components",
|
|
|
|
gulp.series("buildnumber", function() {
|
|
|
|
console.log();
|
|
|
|
console.log("### Creating generic components");
|
|
|
|
var defines = builder.merge(DEFINES, { COMPONENTS: true, GENERIC: true });
|
|
|
|
|
|
|
|
rimraf.sync(COMPONENTS_DIR);
|
|
|
|
|
|
|
|
var COMPONENTS_IMAGES = [
|
|
|
|
"web/images/annotation-*.svg",
|
|
|
|
"web/images/loading-icon.gif",
|
|
|
|
"web/images/shadow.png",
|
|
|
|
"web/images/texture.png",
|
|
|
|
];
|
|
|
|
|
|
|
|
return merge([
|
|
|
|
createComponentsBundle(defines).pipe(gulp.dest(COMPONENTS_DIR)),
|
|
|
|
gulp.src(COMPONENTS_IMAGES).pipe(gulp.dest(COMPONENTS_DIR + "images")),
|
|
|
|
preprocessCSS("web/pdf_viewer.css", "components", defines, true)
|
Add support for CSS variables using the `PostCSS CSS Variables` package (issue 11462)
Having thought *briefly* about using `css-vars-ponyfill`, I'm no longer convinced that it'd be a good idea. The reason is that if we actually want to properly support CSS variables, then that functionality should be available in *all* of our CSS files.
Note in particular the `pdf_viewer.css` file that's built as part of the `COMPONENTS` target, in which case I really cannot see how a rewrite-at-the-client solution would ever be guaranteed to always work correctly and without accidentally touching other CSS in the surrounding application.
All-in-all, simply re-writing the CSS variables at build-time seems much easier and is thus the approach taken in this patch; courtesy of https://github.com/MadLittleMods/postcss-css-variables
By using its `preserve` option, the built files will thus include *both* a fallback and a modern `var(...)` format[1]. As a proof-of-concept this patch removes a couple of manually added fallback values, and converts an additional sidebar related property to use a CSS variable.
---
[1] Comparing the `master` branch with this patch, when using `gulp generic`, produces the following diff for the built `web/viewer.css` file:
```diff
@@ -408,6 +408,7 @@
:root {
--sidebar-width: 200px;
+ --sidebar-transition-duration: 200ms;
}
* {
@@ -550,27 +551,28 @@
position: absolute;
top: 32px;
bottom: 0;
- width: 200px; /* Here, and elsewhere below, keep the constant value for compatibility
- with older browsers that lack support for CSS variables. */
+ width: 200px;
width: var(--sidebar-width);
visibility: hidden;
z-index: 100;
border-top: 1px solid rgba(51, 51, 51, 1);
-webkit-transition-duration: 200ms;
transition-duration: 200ms;
+ -webkit-transition-duration: var(--sidebar-transition-duration);
+ transition-duration: var(--sidebar-transition-duration);
-webkit-transition-timing-function: ease;
transition-timing-function: ease;
}
html[dir='ltr'] #sidebarContainer {
-webkit-transition-property: left;
transition-property: left;
- left: -200px;
+ left: calc(-1 * 200px);
left: calc(-1 * var(--sidebar-width));
}
html[dir='rtl'] #sidebarContainer {
-webkit-transition-property: right;
transition-property: right;
- right: -200px;
+ right: calc(-1 * 200px);
right: calc(-1 * var(--sidebar-width));
}
@@ -640,6 +642,8 @@
#viewerContainer:not(.pdfPresentationMode) {
-webkit-transition-duration: 200ms;
transition-duration: 200ms;
+ -webkit-transition-duration: var(--sidebar-transition-duration);
+ transition-duration: var(--sidebar-transition-duration);
-webkit-transition-timing-function: ease;
transition-timing-function: ease;
}
```
2020-02-05 06:28:38 +09:00
|
|
|
.pipe(
|
|
|
|
postcss([
|
|
|
|
cssvariables(CSS_VARIABLES_CONFIG),
|
2020-02-05 08:34:44 +09:00
|
|
|
calc(),
|
Add support for CSS variables using the `PostCSS CSS Variables` package (issue 11462)
Having thought *briefly* about using `css-vars-ponyfill`, I'm no longer convinced that it'd be a good idea. The reason is that if we actually want to properly support CSS variables, then that functionality should be available in *all* of our CSS files.
Note in particular the `pdf_viewer.css` file that's built as part of the `COMPONENTS` target, in which case I really cannot see how a rewrite-at-the-client solution would ever be guaranteed to always work correctly and without accidentally touching other CSS in the surrounding application.
All-in-all, simply re-writing the CSS variables at build-time seems much easier and is thus the approach taken in this patch; courtesy of https://github.com/MadLittleMods/postcss-css-variables
By using its `preserve` option, the built files will thus include *both* a fallback and a modern `var(...)` format[1]. As a proof-of-concept this patch removes a couple of manually added fallback values, and converts an additional sidebar related property to use a CSS variable.
---
[1] Comparing the `master` branch with this patch, when using `gulp generic`, produces the following diff for the built `web/viewer.css` file:
```diff
@@ -408,6 +408,7 @@
:root {
--sidebar-width: 200px;
+ --sidebar-transition-duration: 200ms;
}
* {
@@ -550,27 +551,28 @@
position: absolute;
top: 32px;
bottom: 0;
- width: 200px; /* Here, and elsewhere below, keep the constant value for compatibility
- with older browsers that lack support for CSS variables. */
+ width: 200px;
width: var(--sidebar-width);
visibility: hidden;
z-index: 100;
border-top: 1px solid rgba(51, 51, 51, 1);
-webkit-transition-duration: 200ms;
transition-duration: 200ms;
+ -webkit-transition-duration: var(--sidebar-transition-duration);
+ transition-duration: var(--sidebar-transition-duration);
-webkit-transition-timing-function: ease;
transition-timing-function: ease;
}
html[dir='ltr'] #sidebarContainer {
-webkit-transition-property: left;
transition-property: left;
- left: -200px;
+ left: calc(-1 * 200px);
left: calc(-1 * var(--sidebar-width));
}
html[dir='rtl'] #sidebarContainer {
-webkit-transition-property: right;
transition-property: right;
- right: -200px;
+ right: calc(-1 * 200px);
right: calc(-1 * var(--sidebar-width));
}
@@ -640,6 +642,8 @@
#viewerContainer:not(.pdfPresentationMode) {
-webkit-transition-duration: 200ms;
transition-duration: 200ms;
+ -webkit-transition-duration: var(--sidebar-transition-duration);
+ transition-duration: var(--sidebar-transition-duration);
-webkit-transition-timing-function: ease;
transition-timing-function: ease;
}
```
2020-02-05 06:28:38 +09:00
|
|
|
autoprefixer(AUTOPREFIXER_CONFIG),
|
|
|
|
])
|
|
|
|
)
|
2017-02-04 23:19:46 +09:00
|
|
|
.pipe(gulp.dest(COMPONENTS_DIR)),
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
]);
|
|
|
|
})
|
|
|
|
);
|
2016-04-23 07:20:47 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task(
|
|
|
|
"image_decoders",
|
|
|
|
gulp.series("buildnumber", function() {
|
|
|
|
console.log();
|
|
|
|
console.log("### Creating image decoders");
|
|
|
|
var defines = builder.merge(DEFINES, {
|
|
|
|
GENERIC: true,
|
|
|
|
IMAGE_DECODERS: true,
|
|
|
|
});
|
2017-02-04 23:19:46 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
return createImageDecodersBundle(defines).pipe(
|
|
|
|
gulp.dest(IMAGE_DECODERS_DIR)
|
|
|
|
);
|
|
|
|
})
|
|
|
|
);
|
2017-02-04 23:19:46 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task(
|
|
|
|
"minified-pre",
|
|
|
|
gulp.series("buildnumber", "default_preferences", "locale", function() {
|
|
|
|
console.log();
|
|
|
|
console.log("### Creating minified viewer");
|
|
|
|
var defines = builder.merge(DEFINES, { MINIFIED: true, GENERIC: true });
|
|
|
|
|
|
|
|
rimraf.sync(MINIFIED_DIR);
|
|
|
|
|
|
|
|
return merge([
|
|
|
|
createBundle(defines).pipe(gulp.dest(MINIFIED_DIR + "build")),
|
|
|
|
createWebBundle(defines).pipe(gulp.dest(MINIFIED_DIR + "web")),
|
|
|
|
createImageDecodersBundle(
|
|
|
|
builder.merge(defines, { IMAGE_DECODERS: true })
|
|
|
|
).pipe(gulp.dest(MINIFIED_DIR + "image_decoders")),
|
|
|
|
gulp
|
|
|
|
.src(COMMON_WEB_FILES, { base: "web/" })
|
|
|
|
.pipe(gulp.dest(MINIFIED_DIR + "web")),
|
|
|
|
gulp
|
|
|
|
.src(
|
|
|
|
["web/locale/*/viewer.properties", "web/locale/locale.properties"],
|
|
|
|
{ base: "web/" }
|
|
|
|
)
|
|
|
|
.pipe(gulp.dest(MINIFIED_DIR + "web")),
|
|
|
|
gulp
|
|
|
|
.src(["external/bcmaps/*.bcmap", "external/bcmaps/LICENSE"], {
|
|
|
|
base: "external/bcmaps",
|
|
|
|
})
|
|
|
|
.pipe(gulp.dest(MINIFIED_DIR + "web/cmaps")),
|
|
|
|
|
|
|
|
preprocessHTML("web/viewer.html", defines).pipe(
|
|
|
|
gulp.dest(MINIFIED_DIR + "web")
|
|
|
|
),
|
|
|
|
preprocessCSS("web/viewer.css", "minified", defines, true)
|
Add support for CSS variables using the `PostCSS CSS Variables` package (issue 11462)
Having thought *briefly* about using `css-vars-ponyfill`, I'm no longer convinced that it'd be a good idea. The reason is that if we actually want to properly support CSS variables, then that functionality should be available in *all* of our CSS files.
Note in particular the `pdf_viewer.css` file that's built as part of the `COMPONENTS` target, in which case I really cannot see how a rewrite-at-the-client solution would ever be guaranteed to always work correctly and without accidentally touching other CSS in the surrounding application.
All-in-all, simply re-writing the CSS variables at build-time seems much easier and is thus the approach taken in this patch; courtesy of https://github.com/MadLittleMods/postcss-css-variables
By using its `preserve` option, the built files will thus include *both* a fallback and a modern `var(...)` format[1]. As a proof-of-concept this patch removes a couple of manually added fallback values, and converts an additional sidebar related property to use a CSS variable.
---
[1] Comparing the `master` branch with this patch, when using `gulp generic`, produces the following diff for the built `web/viewer.css` file:
```diff
@@ -408,6 +408,7 @@
:root {
--sidebar-width: 200px;
+ --sidebar-transition-duration: 200ms;
}
* {
@@ -550,27 +551,28 @@
position: absolute;
top: 32px;
bottom: 0;
- width: 200px; /* Here, and elsewhere below, keep the constant value for compatibility
- with older browsers that lack support for CSS variables. */
+ width: 200px;
width: var(--sidebar-width);
visibility: hidden;
z-index: 100;
border-top: 1px solid rgba(51, 51, 51, 1);
-webkit-transition-duration: 200ms;
transition-duration: 200ms;
+ -webkit-transition-duration: var(--sidebar-transition-duration);
+ transition-duration: var(--sidebar-transition-duration);
-webkit-transition-timing-function: ease;
transition-timing-function: ease;
}
html[dir='ltr'] #sidebarContainer {
-webkit-transition-property: left;
transition-property: left;
- left: -200px;
+ left: calc(-1 * 200px);
left: calc(-1 * var(--sidebar-width));
}
html[dir='rtl'] #sidebarContainer {
-webkit-transition-property: right;
transition-property: right;
- right: -200px;
+ right: calc(-1 * 200px);
right: calc(-1 * var(--sidebar-width));
}
@@ -640,6 +642,8 @@
#viewerContainer:not(.pdfPresentationMode) {
-webkit-transition-duration: 200ms;
transition-duration: 200ms;
+ -webkit-transition-duration: var(--sidebar-transition-duration);
+ transition-duration: var(--sidebar-transition-duration);
-webkit-transition-timing-function: ease;
transition-timing-function: ease;
}
```
2020-02-05 06:28:38 +09:00
|
|
|
.pipe(
|
|
|
|
postcss([
|
|
|
|
cssvariables(CSS_VARIABLES_CONFIG),
|
2020-02-05 08:34:44 +09:00
|
|
|
calc(),
|
Add support for CSS variables using the `PostCSS CSS Variables` package (issue 11462)
Having thought *briefly* about using `css-vars-ponyfill`, I'm no longer convinced that it'd be a good idea. The reason is that if we actually want to properly support CSS variables, then that functionality should be available in *all* of our CSS files.
Note in particular the `pdf_viewer.css` file that's built as part of the `COMPONENTS` target, in which case I really cannot see how a rewrite-at-the-client solution would ever be guaranteed to always work correctly and without accidentally touching other CSS in the surrounding application.
All-in-all, simply re-writing the CSS variables at build-time seems much easier and is thus the approach taken in this patch; courtesy of https://github.com/MadLittleMods/postcss-css-variables
By using its `preserve` option, the built files will thus include *both* a fallback and a modern `var(...)` format[1]. As a proof-of-concept this patch removes a couple of manually added fallback values, and converts an additional sidebar related property to use a CSS variable.
---
[1] Comparing the `master` branch with this patch, when using `gulp generic`, produces the following diff for the built `web/viewer.css` file:
```diff
@@ -408,6 +408,7 @@
:root {
--sidebar-width: 200px;
+ --sidebar-transition-duration: 200ms;
}
* {
@@ -550,27 +551,28 @@
position: absolute;
top: 32px;
bottom: 0;
- width: 200px; /* Here, and elsewhere below, keep the constant value for compatibility
- with older browsers that lack support for CSS variables. */
+ width: 200px;
width: var(--sidebar-width);
visibility: hidden;
z-index: 100;
border-top: 1px solid rgba(51, 51, 51, 1);
-webkit-transition-duration: 200ms;
transition-duration: 200ms;
+ -webkit-transition-duration: var(--sidebar-transition-duration);
+ transition-duration: var(--sidebar-transition-duration);
-webkit-transition-timing-function: ease;
transition-timing-function: ease;
}
html[dir='ltr'] #sidebarContainer {
-webkit-transition-property: left;
transition-property: left;
- left: -200px;
+ left: calc(-1 * 200px);
left: calc(-1 * var(--sidebar-width));
}
html[dir='rtl'] #sidebarContainer {
-webkit-transition-property: right;
transition-property: right;
- right: -200px;
+ right: calc(-1 * 200px);
right: calc(-1 * var(--sidebar-width));
}
@@ -640,6 +642,8 @@
#viewerContainer:not(.pdfPresentationMode) {
-webkit-transition-duration: 200ms;
transition-duration: 200ms;
+ -webkit-transition-duration: var(--sidebar-transition-duration);
+ transition-duration: var(--sidebar-transition-duration);
-webkit-transition-timing-function: ease;
transition-timing-function: ease;
}
```
2020-02-05 06:28:38 +09:00
|
|
|
autoprefixer(AUTOPREFIXER_CONFIG),
|
|
|
|
])
|
|
|
|
)
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
.pipe(gulp.dest(MINIFIED_DIR + "web")),
|
|
|
|
|
|
|
|
gulp
|
|
|
|
.src("web/compressed.tracemonkey-pldi-09.pdf")
|
|
|
|
.pipe(gulp.dest(MINIFIED_DIR + "web")),
|
|
|
|
]);
|
|
|
|
})
|
|
|
|
);
|
|
|
|
|
|
|
|
gulp.task(
|
|
|
|
"minified-post",
|
|
|
|
gulp.series("minified-pre", function(done) {
|
|
|
|
var pdfFile = fs.readFileSync(MINIFIED_DIR + "/build/pdf.js").toString();
|
|
|
|
var pdfWorkerFile = fs
|
|
|
|
.readFileSync(MINIFIED_DIR + "/build/pdf.worker.js")
|
|
|
|
.toString();
|
|
|
|
var pdfImageDecodersFile = fs
|
|
|
|
.readFileSync(MINIFIED_DIR + "/image_decoders/pdf.image_decoders.js")
|
|
|
|
.toString();
|
|
|
|
var viewerFiles = {
|
|
|
|
"pdf.js": pdfFile,
|
|
|
|
"viewer.js": fs.readFileSync(MINIFIED_DIR + "/web/viewer.js").toString(),
|
|
|
|
};
|
2017-04-19 04:00:53 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log();
|
|
|
|
console.log("### Minifying js files");
|
2017-04-19 04:00:53 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var Terser = require("terser");
|
|
|
|
// V8 chokes on very long sequences. Works around that.
|
|
|
|
var optsForHugeFile = { compress: { sequences: false } };
|
2017-04-19 04:00:53 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
fs.writeFileSync(
|
|
|
|
MINIFIED_DIR + "/web/pdf.viewer.js",
|
|
|
|
Terser.minify(viewerFiles).code
|
|
|
|
);
|
|
|
|
fs.writeFileSync(
|
|
|
|
MINIFIED_DIR + "/build/pdf.min.js",
|
|
|
|
Terser.minify(pdfFile).code
|
|
|
|
);
|
|
|
|
fs.writeFileSync(
|
|
|
|
MINIFIED_DIR + "/build/pdf.worker.min.js",
|
|
|
|
Terser.minify(pdfWorkerFile, optsForHugeFile).code
|
|
|
|
);
|
|
|
|
fs.writeFileSync(
|
|
|
|
MINIFIED_DIR + "image_decoders/pdf.image_decoders.min.js",
|
|
|
|
Terser.minify(pdfImageDecodersFile).code
|
|
|
|
);
|
2017-04-19 04:00:53 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log();
|
|
|
|
console.log("### Cleaning js files");
|
|
|
|
|
|
|
|
fs.unlinkSync(MINIFIED_DIR + "/web/viewer.js");
|
|
|
|
fs.unlinkSync(MINIFIED_DIR + "/web/debugger.js");
|
|
|
|
fs.unlinkSync(MINIFIED_DIR + "/build/pdf.js");
|
|
|
|
fs.unlinkSync(MINIFIED_DIR + "/build/pdf.worker.js");
|
|
|
|
fs.renameSync(
|
|
|
|
MINIFIED_DIR + "/build/pdf.min.js",
|
|
|
|
MINIFIED_DIR + "/build/pdf.js"
|
|
|
|
);
|
|
|
|
fs.renameSync(
|
|
|
|
MINIFIED_DIR + "/build/pdf.worker.min.js",
|
|
|
|
MINIFIED_DIR + "/build/pdf.worker.js"
|
|
|
|
);
|
|
|
|
fs.renameSync(
|
|
|
|
MINIFIED_DIR + "/image_decoders/pdf.image_decoders.min.js",
|
|
|
|
MINIFIED_DIR + "/image_decoders/pdf.image_decoders.js"
|
|
|
|
);
|
|
|
|
done();
|
|
|
|
})
|
|
|
|
);
|
2017-02-07 23:53:33 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task("minified", gulp.series("minified-post"));
|
2017-04-19 04:00:53 +09:00
|
|
|
|
2018-03-17 00:46:57 +09:00
|
|
|
function preprocessDefaultPreferences(content) {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var preprocessor2 = require("./external/builder/preprocessor2.js");
|
|
|
|
var licenseHeader = fs.readFileSync("./src/license_header.js").toString();
|
2018-03-17 00:46:57 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var GLOBALS = "/* eslint-disable */\n";
|
2018-03-17 00:46:57 +09:00
|
|
|
var MODIFICATION_WARNING =
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
"//\n// THIS FILE IS GENERATED AUTOMATICALLY, DO NOT EDIT MANUALLY!\n//\n";
|
2018-03-17 00:46:57 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
content = preprocessor2.preprocessPDFJSCode(
|
|
|
|
{
|
|
|
|
rootPath: __dirname,
|
|
|
|
defines: DEFINES,
|
|
|
|
},
|
|
|
|
content
|
|
|
|
);
|
|
|
|
|
|
|
|
return (
|
|
|
|
licenseHeader +
|
|
|
|
"\n" +
|
|
|
|
GLOBALS +
|
|
|
|
"\n" +
|
|
|
|
MODIFICATION_WARNING +
|
|
|
|
"\n" +
|
|
|
|
content +
|
|
|
|
"\n"
|
|
|
|
);
|
2018-03-17 00:46:57 +09:00
|
|
|
}
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task(
|
|
|
|
"mozcentral-pre",
|
|
|
|
gulp.series("buildnumber", "default_preferences", function() {
|
|
|
|
console.log();
|
|
|
|
console.log("### Building mozilla-central extension");
|
|
|
|
var defines = builder.merge(DEFINES, {
|
|
|
|
MOZCENTRAL: true,
|
|
|
|
SKIP_BABEL: true,
|
|
|
|
});
|
2017-02-07 23:53:33 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var MOZCENTRAL_DIR = BUILD_DIR + "mozcentral/",
|
|
|
|
MOZCENTRAL_EXTENSION_DIR = MOZCENTRAL_DIR + "browser/extensions/pdfjs/",
|
|
|
|
MOZCENTRAL_CONTENT_DIR = MOZCENTRAL_EXTENSION_DIR + "content/",
|
|
|
|
FIREFOX_EXTENSION_DIR = "extensions/firefox/",
|
|
|
|
MOZCENTRAL_L10N_DIR = MOZCENTRAL_DIR + "browser/locales/en-US/pdfviewer/",
|
|
|
|
FIREFOX_CONTENT_DIR = EXTENSION_SRC_DIR + "/firefox/content/";
|
|
|
|
|
|
|
|
// Clear out everything in the firefox extension build directory
|
|
|
|
rimraf.sync(MOZCENTRAL_DIR);
|
|
|
|
|
|
|
|
var versionJSON = getVersionJSON();
|
|
|
|
var version = versionJSON.version,
|
|
|
|
commit = versionJSON.commit;
|
|
|
|
|
|
|
|
return merge([
|
|
|
|
createBundle(defines).pipe(gulp.dest(MOZCENTRAL_CONTENT_DIR + "build")),
|
|
|
|
createWebBundle(defines).pipe(gulp.dest(MOZCENTRAL_CONTENT_DIR + "web")),
|
|
|
|
gulp
|
|
|
|
.src(COMMON_WEB_FILES, { base: "web/" })
|
|
|
|
.pipe(gulp.dest(MOZCENTRAL_CONTENT_DIR + "web")),
|
|
|
|
gulp
|
|
|
|
.src(["external/bcmaps/*.bcmap", "external/bcmaps/LICENSE"], {
|
|
|
|
base: "external/bcmaps",
|
|
|
|
})
|
|
|
|
.pipe(gulp.dest(MOZCENTRAL_CONTENT_DIR + "web/cmaps")),
|
|
|
|
|
|
|
|
preprocessHTML("web/viewer.html", defines).pipe(
|
|
|
|
gulp.dest(MOZCENTRAL_CONTENT_DIR + "web")
|
|
|
|
),
|
|
|
|
preprocessCSS("web/viewer.css", "mozcentral", defines, true)
|
|
|
|
.pipe(
|
|
|
|
postcss([
|
|
|
|
autoprefixer({ overrideBrowserslist: ["last 1 firefox versions"] }),
|
|
|
|
])
|
|
|
|
)
|
|
|
|
.pipe(gulp.dest(MOZCENTRAL_CONTENT_DIR + "web")),
|
|
|
|
|
|
|
|
gulp.src("l10n/en-US/*.properties").pipe(gulp.dest(MOZCENTRAL_L10N_DIR)),
|
|
|
|
gulp
|
|
|
|
.src(FIREFOX_EXTENSION_DIR + "README.mozilla")
|
2017-02-07 23:53:33 +09:00
|
|
|
.pipe(replace(/\bPDFJSSCRIPT_VERSION\b/g, version))
|
2017-04-28 05:33:53 +09:00
|
|
|
.pipe(replace(/\bPDFJSSCRIPT_COMMIT\b/g, commit))
|
2017-02-04 23:19:46 +09:00
|
|
|
.pipe(gulp.dest(MOZCENTRAL_EXTENSION_DIR)),
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.src("LICENSE").pipe(gulp.dest(MOZCENTRAL_EXTENSION_DIR)),
|
|
|
|
gulp
|
|
|
|
.src(FIREFOX_CONTENT_DIR + "PdfJsDefaultPreferences.jsm")
|
|
|
|
.pipe(transform("utf8", preprocessDefaultPreferences))
|
2018-03-17 00:46:57 +09:00
|
|
|
.pipe(gulp.dest(MOZCENTRAL_CONTENT_DIR)),
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
]);
|
|
|
|
})
|
|
|
|
);
|
2017-02-07 23:53:33 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task("mozcentral", gulp.series("mozcentral-pre"));
|
2017-02-04 23:19:46 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task(
|
|
|
|
"chromium-pre",
|
|
|
|
gulp.series("buildnumber", "default_preferences", "locale", function() {
|
|
|
|
console.log();
|
|
|
|
console.log("### Building Chromium extension");
|
|
|
|
var defines = builder.merge(DEFINES, { CHROME: true });
|
|
|
|
|
|
|
|
var CHROME_BUILD_DIR = BUILD_DIR + "/chromium/",
|
|
|
|
CHROME_BUILD_CONTENT_DIR = CHROME_BUILD_DIR + "/content/";
|
|
|
|
|
|
|
|
// Clear out everything in the chrome extension build directory
|
|
|
|
rimraf.sync(CHROME_BUILD_DIR);
|
|
|
|
|
|
|
|
var version = getVersionJSON().version;
|
|
|
|
|
|
|
|
return merge([
|
|
|
|
createBundle(defines).pipe(gulp.dest(CHROME_BUILD_CONTENT_DIR + "build")),
|
|
|
|
createWebBundle(defines).pipe(
|
|
|
|
gulp.dest(CHROME_BUILD_CONTENT_DIR + "web")
|
|
|
|
),
|
|
|
|
gulp
|
|
|
|
.src(COMMON_WEB_FILES, { base: "web/" })
|
|
|
|
.pipe(gulp.dest(CHROME_BUILD_CONTENT_DIR + "web")),
|
|
|
|
|
|
|
|
gulp
|
|
|
|
.src(
|
|
|
|
["web/locale/*/viewer.properties", "web/locale/locale.properties"],
|
|
|
|
{ base: "web/" }
|
|
|
|
)
|
|
|
|
.pipe(gulp.dest(CHROME_BUILD_CONTENT_DIR + "web")),
|
|
|
|
gulp
|
|
|
|
.src(["external/bcmaps/*.bcmap", "external/bcmaps/LICENSE"], {
|
|
|
|
base: "external/bcmaps",
|
|
|
|
})
|
|
|
|
.pipe(gulp.dest(CHROME_BUILD_CONTENT_DIR + "web/cmaps")),
|
|
|
|
|
|
|
|
preprocessHTML("web/viewer.html", defines).pipe(
|
|
|
|
gulp.dest(CHROME_BUILD_CONTENT_DIR + "web")
|
|
|
|
),
|
|
|
|
preprocessCSS("web/viewer.css", "chrome", defines, true)
|
|
|
|
.pipe(
|
|
|
|
postcss([autoprefixer({ overrideBrowserslist: ["chrome >= 49"] })])
|
|
|
|
)
|
|
|
|
.pipe(gulp.dest(CHROME_BUILD_CONTENT_DIR + "web")),
|
|
|
|
|
|
|
|
gulp.src("LICENSE").pipe(gulp.dest(CHROME_BUILD_DIR)),
|
|
|
|
gulp
|
|
|
|
.src("extensions/chromium/manifest.json")
|
2017-02-07 23:53:33 +09:00
|
|
|
.pipe(replace(/\bPDFJSSCRIPT_VERSION\b/g, version))
|
2017-02-04 23:19:46 +09:00
|
|
|
.pipe(gulp.dest(CHROME_BUILD_DIR)),
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp
|
|
|
|
.src(
|
|
|
|
[
|
|
|
|
"extensions/chromium/**/*.{html,js,css,png}",
|
|
|
|
"extensions/chromium/preferences_schema.json",
|
|
|
|
],
|
|
|
|
{ base: "extensions/chromium/" }
|
|
|
|
)
|
2017-02-04 23:19:46 +09:00
|
|
|
.pipe(gulp.dest(CHROME_BUILD_DIR)),
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
]);
|
|
|
|
})
|
|
|
|
);
|
2016-04-23 07:20:47 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task("chromium", gulp.series("chromium-pre"));
|
2017-02-07 23:53:33 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task("jsdoc", function(done) {
|
2016-10-16 23:06:37 +09:00
|
|
|
console.log();
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log("### Generating documentation (JSDoc)");
|
2016-10-16 23:06:37 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var JSDOC_FILES = ["src/doc_helper.js", "src/display/api.js"];
|
2016-10-16 23:06:37 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
rimraf(JSDOC_BUILD_DIR, function() {
|
|
|
|
mkdirp(JSDOC_BUILD_DIR, function() {
|
|
|
|
var command =
|
|
|
|
'"node_modules/.bin/jsdoc" -d ' +
|
|
|
|
JSDOC_BUILD_DIR +
|
|
|
|
" " +
|
|
|
|
JSDOC_FILES.join(" ");
|
2016-10-16 23:06:37 +09:00
|
|
|
exec(command, done);
|
|
|
|
});
|
|
|
|
});
|
|
|
|
});
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task(
|
|
|
|
"lib",
|
|
|
|
gulp.series("buildnumber", "default_preferences", function() {
|
|
|
|
// When we create a bundle, webpack is run on the source and it will replace
|
|
|
|
// require with __webpack_require__. When we want to use the real require,
|
|
|
|
// __non_webpack_require__ has to be used.
|
|
|
|
// In this target, we don't create a bundle, so we have to replace the
|
|
|
|
// occurences of __non_webpack_require__ ourselves.
|
|
|
|
function babelPluginReplaceNonWebPackRequire(babel) {
|
|
|
|
return {
|
|
|
|
visitor: {
|
|
|
|
Identifier(path, state) {
|
|
|
|
if (path.node.name === "__non_webpack_require__") {
|
|
|
|
path.replaceWith(babel.types.identifier("require"));
|
|
|
|
}
|
|
|
|
},
|
2017-07-09 22:19:16 +09:00
|
|
|
},
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
};
|
|
|
|
}
|
|
|
|
function preprocess(content) {
|
|
|
|
var skipBabel =
|
|
|
|
process.env["SKIP_BABEL"] === "true" ||
|
|
|
|
/\/\*\s*no-babel-preset\s*\*\//.test(content);
|
|
|
|
content = preprocessor2.preprocessPDFJSCode(ctx, content);
|
|
|
|
content = babel.transform(content, {
|
|
|
|
sourceType: "module",
|
|
|
|
presets: skipBabel ? undefined : ["@babel/preset-env"],
|
|
|
|
plugins: [
|
|
|
|
"@babel/plugin-transform-modules-commonjs",
|
|
|
|
[
|
|
|
|
"@babel/plugin-transform-runtime",
|
|
|
|
{
|
|
|
|
helpers: false,
|
|
|
|
regenerator: true,
|
|
|
|
},
|
|
|
|
],
|
|
|
|
babelPluginReplaceNonWebPackRequire,
|
|
|
|
],
|
|
|
|
}).code;
|
|
|
|
var removeCjsSrc = /^(var\s+\w+\s*=\s*(_interopRequireDefault\()?require\(".*?)(?:\/src)(\/[^"]*"\)\)?;)$/gm;
|
|
|
|
content = content.replace(
|
|
|
|
removeCjsSrc,
|
|
|
|
(all, prefix, interop, suffix) => {
|
|
|
|
return prefix + suffix;
|
|
|
|
}
|
|
|
|
);
|
|
|
|
return licenseHeaderLibre + content;
|
|
|
|
}
|
|
|
|
var babel = require("@babel/core");
|
|
|
|
var versionInfo = getVersionJSON();
|
|
|
|
var ctx = {
|
|
|
|
rootPath: __dirname,
|
|
|
|
saveComments: false,
|
|
|
|
defines: builder.merge(DEFINES, {
|
|
|
|
GENERIC: true,
|
|
|
|
LIB: true,
|
|
|
|
BUNDLE_VERSION: versionInfo.version,
|
|
|
|
BUNDLE_BUILD: versionInfo.commit,
|
|
|
|
TESTING: process.env["TESTING"] === "true",
|
|
|
|
}),
|
|
|
|
map: {
|
|
|
|
"pdfjs-lib": "../pdf",
|
2017-07-09 22:19:16 +09:00
|
|
|
},
|
|
|
|
};
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var licenseHeaderLibre = fs
|
|
|
|
.readFileSync("./src/license_header_libre.js")
|
|
|
|
.toString();
|
|
|
|
var preprocessor2 = require("./external/builder/preprocessor2.js");
|
|
|
|
return merge([
|
|
|
|
gulp.src(
|
|
|
|
[
|
|
|
|
"src/{core,display,shared}/*.js",
|
|
|
|
"!src/shared/{cffStandardStrings,fonts_utils}.js",
|
|
|
|
"src/{pdf,pdf.worker}.js",
|
|
|
|
],
|
|
|
|
{ base: "src/" }
|
|
|
|
),
|
|
|
|
gulp.src(
|
|
|
|
["examples/node/domstubs.js", "web/*.js", "!web/{pdfjs,viewer}.js"],
|
|
|
|
{ base: "." }
|
|
|
|
),
|
|
|
|
gulp.src("test/unit/*.js", { base: "." }),
|
|
|
|
])
|
|
|
|
.pipe(transform("utf8", preprocess))
|
|
|
|
.pipe(gulp.dest("build/lib/"));
|
|
|
|
})
|
|
|
|
);
|
|
|
|
|
|
|
|
gulp.task(
|
|
|
|
"publish",
|
|
|
|
gulp.series("generic", function(done) {
|
|
|
|
var version = JSON.parse(
|
|
|
|
fs.readFileSync(BUILD_DIR + "version.json").toString()
|
|
|
|
).version;
|
|
|
|
|
|
|
|
config.stableVersion = config.betaVersion;
|
|
|
|
config.betaVersion = version;
|
|
|
|
|
|
|
|
createStringSource(CONFIG_FILE, JSON.stringify(config, null, 2))
|
|
|
|
.pipe(gulp.dest("."))
|
|
|
|
.on("end", function() {
|
|
|
|
var targetName = "pdfjs-" + version + "-dist.zip";
|
|
|
|
gulp
|
|
|
|
.src(BUILD_DIR + "generic/**")
|
|
|
|
.pipe(zip(targetName))
|
|
|
|
.pipe(gulp.dest(BUILD_DIR))
|
|
|
|
.on("end", function() {
|
|
|
|
console.log("Built distribution file: " + targetName);
|
|
|
|
done();
|
|
|
|
});
|
|
|
|
});
|
|
|
|
})
|
|
|
|
);
|
2016-04-27 06:28:36 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task("testing-pre", function(done) {
|
|
|
|
process.env["TESTING"] = "true";
|
2018-11-19 02:33:23 +09:00
|
|
|
done();
|
2018-06-12 00:25:50 +09:00
|
|
|
});
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task(
|
|
|
|
"test",
|
|
|
|
gulp.series("testing-pre", "generic", "components", function() {
|
|
|
|
return streamqueue(
|
|
|
|
{ objectMode: true },
|
|
|
|
createTestSource("unit"),
|
|
|
|
createTestSource("browser")
|
|
|
|
);
|
|
|
|
})
|
|
|
|
);
|
|
|
|
|
|
|
|
gulp.task(
|
|
|
|
"bottest",
|
|
|
|
gulp.series("testing-pre", "generic", "components", function() {
|
|
|
|
return streamqueue(
|
|
|
|
{ objectMode: true },
|
|
|
|
createTestSource("unit", true),
|
|
|
|
createTestSource("font", true),
|
|
|
|
createTestSource("browser (no reftest)", true)
|
|
|
|
);
|
|
|
|
})
|
|
|
|
);
|
|
|
|
|
|
|
|
gulp.task(
|
|
|
|
"browsertest",
|
|
|
|
gulp.series("testing-pre", "generic", "components", function() {
|
|
|
|
return createTestSource("browser");
|
|
|
|
})
|
|
|
|
);
|
|
|
|
|
|
|
|
gulp.task(
|
|
|
|
"unittest",
|
|
|
|
gulp.series("testing-pre", "generic", "components", function() {
|
|
|
|
return createTestSource("unit");
|
|
|
|
})
|
|
|
|
);
|
|
|
|
|
|
|
|
gulp.task(
|
|
|
|
"fonttest",
|
|
|
|
gulp.series("testing-pre", function() {
|
|
|
|
return createTestSource("font");
|
|
|
|
})
|
|
|
|
);
|
|
|
|
|
|
|
|
gulp.task(
|
|
|
|
"makeref",
|
|
|
|
gulp.series("testing-pre", "generic", "components", function(done) {
|
|
|
|
makeRef(done);
|
|
|
|
})
|
|
|
|
);
|
|
|
|
|
|
|
|
gulp.task(
|
|
|
|
"botmakeref",
|
|
|
|
gulp.series("testing-pre", "generic", "components", function(done) {
|
|
|
|
makeRef(done, true);
|
|
|
|
})
|
|
|
|
);
|
|
|
|
|
|
|
|
gulp.task("baseline", function(done) {
|
2017-02-22 07:24:07 +09:00
|
|
|
console.log();
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log("### Creating baseline environment");
|
2017-02-22 07:24:07 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var baselineCommit = process.env["BASELINE"];
|
2017-02-22 07:24:07 +09:00
|
|
|
if (!baselineCommit) {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
done(new Error("Missing baseline commit. Specify the BASELINE variable."));
|
2017-02-22 07:24:07 +09:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var initializeCommand = "git fetch origin";
|
2017-02-22 07:24:07 +09:00
|
|
|
if (!checkDir(BASELINE_DIR)) {
|
|
|
|
mkdirp.sync(BASELINE_DIR);
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
initializeCommand = "git clone ../../ .";
|
2017-02-22 07:24:07 +09:00
|
|
|
}
|
|
|
|
|
|
|
|
var workingDirectory = path.resolve(process.cwd(), BASELINE_DIR);
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
exec(initializeCommand, { cwd: workingDirectory }, function(error) {
|
2017-02-22 07:24:07 +09:00
|
|
|
if (error) {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
done(new Error("Baseline clone/fetch failed."));
|
2017-02-22 07:24:07 +09:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
exec("git checkout " + baselineCommit, { cwd: workingDirectory }, function(
|
|
|
|
error
|
|
|
|
) {
|
2017-02-22 07:24:07 +09:00
|
|
|
if (error) {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
done(new Error("Baseline commit checkout failed."));
|
2017-02-22 07:24:07 +09:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
console.log('Baseline commit "' + baselineCommit + '" checked out.');
|
|
|
|
done();
|
|
|
|
});
|
|
|
|
});
|
|
|
|
});
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task(
|
|
|
|
"unittestcli",
|
|
|
|
gulp.series("testing-pre", "lib", function(done) {
|
|
|
|
var options = [
|
|
|
|
"node_modules/jasmine/bin/jasmine",
|
|
|
|
"JASMINE_CONFIG_PATH=test/unit/clitests.json",
|
|
|
|
];
|
|
|
|
var jasmineProcess = startNode(options, { stdio: "inherit" });
|
|
|
|
jasmineProcess.on("close", function(code) {
|
|
|
|
if (code !== 0) {
|
|
|
|
done(new Error("Unit tests failed."));
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
done();
|
|
|
|
});
|
|
|
|
})
|
|
|
|
);
|
2016-05-02 23:58:29 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task(
|
|
|
|
"lint",
|
|
|
|
gulp.series("default_preferences", function(done) {
|
2016-05-12 07:58:17 +09:00
|
|
|
console.log();
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log("### Linting JS files");
|
|
|
|
|
|
|
|
// Ensure that we lint the Firefox specific *.jsm files too.
|
|
|
|
var options = [
|
|
|
|
"node_modules/eslint/bin/eslint",
|
|
|
|
"--ext",
|
|
|
|
".js,.jsm",
|
|
|
|
".",
|
|
|
|
"--report-unused-disable-directives",
|
|
|
|
];
|
|
|
|
var esLintProcess = startNode(options, { stdio: "inherit" });
|
|
|
|
esLintProcess.on("close", function(code) {
|
|
|
|
if (code !== 0) {
|
|
|
|
done(new Error("ESLint failed."));
|
|
|
|
return;
|
|
|
|
}
|
2016-05-12 07:58:17 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log();
|
|
|
|
console.log("### Checking supplemental files");
|
2016-05-12 07:58:17 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
if (
|
|
|
|
!checkChromePreferencesFile(
|
|
|
|
"extensions/chromium/preferences_schema.json",
|
|
|
|
"build/default_preferences.json"
|
|
|
|
)
|
|
|
|
) {
|
|
|
|
done(new Error("chromium/preferences_schema is not in sync."));
|
|
|
|
return;
|
|
|
|
}
|
2016-05-02 23:58:29 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log("files checked, no errors found");
|
|
|
|
done();
|
|
|
|
});
|
|
|
|
})
|
|
|
|
);
|
|
|
|
|
|
|
|
gulp.task("server", function() {
|
2016-03-05 00:36:46 +09:00
|
|
|
console.log();
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log("### Starting local server");
|
2016-03-05 00:36:46 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var WebServer = require("./test/webserver.js").WebServer;
|
2016-03-05 00:36:46 +09:00
|
|
|
var server = new WebServer();
|
|
|
|
server.port = 8888;
|
|
|
|
server.start();
|
|
|
|
});
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task("clean", function(done) {
|
2016-03-05 05:14:56 +09:00
|
|
|
console.log();
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log("### Cleaning up project builds");
|
2016-03-05 05:14:56 +09:00
|
|
|
|
2018-11-19 02:33:23 +09:00
|
|
|
rimraf(BUILD_DIR, done);
|
2016-03-05 05:14:56 +09:00
|
|
|
});
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task("makefile", function() {
|
|
|
|
var makefileContent = "help:\n\tgulp\n\n";
|
2016-03-05 00:36:46 +09:00
|
|
|
var targetsNames = [];
|
|
|
|
for (var i in target) {
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
makefileContent += i + ":\n\tgulp " + i + "\n\n";
|
2016-03-05 00:36:46 +09:00
|
|
|
targetsNames.push(i);
|
|
|
|
}
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
makefileContent += ".PHONY: " + targetsNames.join(" ") + "\n";
|
|
|
|
return createStringSource("Makefile", makefileContent).pipe(gulp.dest("."));
|
2016-03-05 00:36:46 +09:00
|
|
|
});
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task("importl10n", function(done) {
|
|
|
|
var locales = require("./external/importL10n/locales.js");
|
2016-03-05 05:14:56 +09:00
|
|
|
|
|
|
|
console.log();
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log("### Importing translations from mozilla-central");
|
2016-03-05 05:14:56 +09:00
|
|
|
|
|
|
|
if (!fs.existsSync(L10N_DIR)) {
|
|
|
|
fs.mkdirSync(L10N_DIR);
|
|
|
|
}
|
2016-04-23 07:23:25 +09:00
|
|
|
locales.downloadL10n(L10N_DIR, done);
|
2016-03-05 05:14:56 +09:00
|
|
|
});
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task("gh-pages-prepare", function() {
|
2017-04-15 04:28:46 +09:00
|
|
|
console.log();
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log("### Creating web site");
|
2017-04-15 04:28:46 +09:00
|
|
|
|
|
|
|
rimraf.sync(GH_PAGES_DIR);
|
|
|
|
|
2017-12-31 03:47:08 +09:00
|
|
|
// 'vfs' because web/viewer.html needs its BOM.
|
2017-04-15 04:28:46 +09:00
|
|
|
return merge([
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
vfs
|
|
|
|
.src(GENERIC_DIR + "**/*", { base: GENERIC_DIR, stripBOM: false })
|
|
|
|
.pipe(gulp.dest(GH_PAGES_DIR)),
|
|
|
|
gulp
|
|
|
|
.src("test/features/**/*", { base: "test/" })
|
|
|
|
.pipe(gulp.dest(GH_PAGES_DIR)),
|
|
|
|
gulp
|
|
|
|
.src(JSDOC_BUILD_DIR + "**/*", { base: JSDOC_BUILD_DIR })
|
|
|
|
.pipe(gulp.dest(GH_PAGES_DIR + "api/draft/")),
|
2017-04-15 04:28:46 +09:00
|
|
|
]);
|
|
|
|
});
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task("wintersmith", function(done) {
|
|
|
|
var wintersmith = require("wintersmith");
|
|
|
|
var env = wintersmith("docs/config.json");
|
2019-05-10 19:54:06 +09:00
|
|
|
env.build(GH_PAGES_DIR, function(error) {
|
2017-04-15 04:28:46 +09:00
|
|
|
if (error) {
|
2019-05-10 19:54:06 +09:00
|
|
|
done(error);
|
|
|
|
return;
|
2017-04-15 04:28:46 +09:00
|
|
|
}
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
replaceInFile(
|
|
|
|
GH_PAGES_DIR + "/getting_started/index.html",
|
|
|
|
/STABLE_VERSION/g,
|
|
|
|
config.stableVersion
|
|
|
|
);
|
|
|
|
replaceInFile(
|
|
|
|
GH_PAGES_DIR + "/getting_started/index.html",
|
|
|
|
/BETA_VERSION/g,
|
|
|
|
config.betaVersion
|
|
|
|
);
|
2018-10-28 03:57:01 +09:00
|
|
|
|
|
|
|
// Hide the beta version button if there is only a stable version.
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
const groupClass = config.betaVersion ? "btn-group-vertical centered" : "";
|
|
|
|
const hiddenClass = config.betaVersion ? "" : "hidden";
|
|
|
|
replaceInFile(
|
|
|
|
GH_PAGES_DIR + "/getting_started/index.html",
|
|
|
|
/GROUP_CLASS/g,
|
|
|
|
groupClass
|
|
|
|
);
|
|
|
|
replaceInFile(
|
|
|
|
GH_PAGES_DIR + "/getting_started/index.html",
|
|
|
|
/HIDDEN_CLASS/g,
|
|
|
|
hiddenClass
|
|
|
|
);
|
|
|
|
|
|
|
|
console.log("Done building with wintersmith.");
|
2017-04-15 04:28:46 +09:00
|
|
|
done();
|
|
|
|
});
|
|
|
|
});
|
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task("gh-pages-git", function(done) {
|
2017-04-15 04:28:46 +09:00
|
|
|
var VERSION = getVersionJSON().version;
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var reason = process.env["PDFJS_UPDATE_REASON"];
|
2017-04-15 04:28:46 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
safeSpawnSync("git", ["init"], { cwd: GH_PAGES_DIR });
|
|
|
|
safeSpawnSync("git", ["remote", "add", "origin", REPO], {
|
|
|
|
cwd: GH_PAGES_DIR,
|
|
|
|
});
|
|
|
|
safeSpawnSync("git", ["add", "-A"], { cwd: GH_PAGES_DIR });
|
|
|
|
safeSpawnSync(
|
|
|
|
"git",
|
|
|
|
[
|
|
|
|
"commit",
|
|
|
|
"-am",
|
|
|
|
"gh-pages site created via gulpfile.js script",
|
|
|
|
"-m",
|
|
|
|
"PDF.js version " + VERSION + (reason ? " - " + reason : ""),
|
2017-04-19 04:00:53 +09:00
|
|
|
],
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
{ cwd: GH_PAGES_DIR }
|
|
|
|
);
|
|
|
|
safeSpawnSync("git", ["branch", "-m", "gh-pages"], { cwd: GH_PAGES_DIR });
|
2017-04-19 04:00:53 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log();
|
|
|
|
console.log("Website built in " + GH_PAGES_DIR);
|
2018-11-19 02:33:23 +09:00
|
|
|
done();
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
});
|
2017-04-19 04:00:53 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task(
|
|
|
|
"web",
|
|
|
|
gulp.series(
|
|
|
|
"generic",
|
|
|
|
"jsdoc",
|
|
|
|
"gh-pages-prepare",
|
|
|
|
"wintersmith",
|
|
|
|
"gh-pages-git"
|
|
|
|
)
|
|
|
|
);
|
|
|
|
|
|
|
|
gulp.task(
|
|
|
|
"dist-pre",
|
|
|
|
gulp.series(
|
|
|
|
"generic",
|
|
|
|
"components",
|
|
|
|
"image_decoders",
|
|
|
|
"lib",
|
|
|
|
"minified",
|
|
|
|
function() {
|
|
|
|
var VERSION = getVersionJSON().version;
|
|
|
|
|
|
|
|
console.log();
|
|
|
|
console.log("### Cloning baseline distribution");
|
|
|
|
|
|
|
|
rimraf.sync(DIST_DIR);
|
|
|
|
mkdirp.sync(DIST_DIR);
|
|
|
|
safeSpawnSync("git", ["clone", "--depth", "1", DIST_REPO_URL, DIST_DIR]);
|
|
|
|
|
|
|
|
console.log();
|
|
|
|
console.log("### Overwriting all files");
|
|
|
|
rimraf.sync(path.join(DIST_DIR, "*"));
|
|
|
|
|
|
|
|
// Rebuilding manifests
|
|
|
|
var DIST_NAME = "pdfjs-dist";
|
|
|
|
var DIST_DESCRIPTION = "Generic build of Mozilla's PDF.js library.";
|
|
|
|
var DIST_KEYWORDS = ["Mozilla", "pdf", "pdf.js"];
|
|
|
|
var DIST_HOMEPAGE = "http://mozilla.github.io/pdf.js/";
|
|
|
|
var DIST_BUGS_URL = "https://github.com/mozilla/pdf.js/issues";
|
|
|
|
var DIST_LICENSE = "Apache-2.0";
|
|
|
|
var npmManifest = {
|
|
|
|
name: DIST_NAME,
|
|
|
|
version: VERSION,
|
|
|
|
main: "build/pdf.js",
|
|
|
|
description: DIST_DESCRIPTION,
|
|
|
|
keywords: DIST_KEYWORDS,
|
|
|
|
homepage: DIST_HOMEPAGE,
|
|
|
|
bugs: DIST_BUGS_URL,
|
|
|
|
license: DIST_LICENSE,
|
|
|
|
browser: {
|
|
|
|
fs: false,
|
|
|
|
http: false,
|
|
|
|
https: false,
|
|
|
|
url: false,
|
|
|
|
zlib: false,
|
|
|
|
},
|
|
|
|
format: "amd", // to not allow system.js to choose 'cjs'
|
|
|
|
repository: {
|
|
|
|
type: "git",
|
|
|
|
url: DIST_REPO_URL,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
var packageJsonSrc = createStringSource(
|
|
|
|
"package.json",
|
|
|
|
JSON.stringify(npmManifest, null, 2)
|
|
|
|
);
|
|
|
|
var bowerManifest = {
|
|
|
|
name: DIST_NAME,
|
|
|
|
version: VERSION,
|
|
|
|
main: ["build/pdf.js", "build/pdf.worker.js"],
|
|
|
|
ignore: [],
|
|
|
|
keywords: DIST_KEYWORDS,
|
|
|
|
};
|
|
|
|
var bowerJsonSrc = createStringSource(
|
|
|
|
"bower.json",
|
|
|
|
JSON.stringify(bowerManifest, null, 2)
|
|
|
|
);
|
|
|
|
|
|
|
|
return merge([
|
|
|
|
packageJsonSrc.pipe(gulp.dest(DIST_DIR)),
|
|
|
|
bowerJsonSrc.pipe(gulp.dest(DIST_DIR)),
|
|
|
|
vfs
|
|
|
|
.src("external/dist/**/*", { base: "external/dist", stripBOM: false })
|
|
|
|
.pipe(gulp.dest(DIST_DIR)),
|
|
|
|
gulp.src(GENERIC_DIR + "LICENSE").pipe(gulp.dest(DIST_DIR)),
|
|
|
|
gulp
|
|
|
|
.src(GENERIC_DIR + "web/cmaps/**/*", { base: GENERIC_DIR + "web" })
|
|
|
|
.pipe(gulp.dest(DIST_DIR)),
|
|
|
|
gulp
|
|
|
|
.src([
|
|
|
|
GENERIC_DIR + "build/pdf.js",
|
|
|
|
GENERIC_DIR + "build/pdf.js.map",
|
|
|
|
GENERIC_DIR + "build/pdf.worker.js",
|
|
|
|
GENERIC_DIR + "build/pdf.worker.js.map",
|
|
|
|
SRC_DIR + "pdf.worker.entry.js",
|
|
|
|
])
|
|
|
|
.pipe(gulp.dest(DIST_DIR + "build/")),
|
|
|
|
gulp
|
|
|
|
.src(MINIFIED_DIR + "build/pdf.js")
|
|
|
|
.pipe(rename("pdf.min.js"))
|
|
|
|
.pipe(gulp.dest(DIST_DIR + "build/")),
|
|
|
|
gulp
|
|
|
|
.src(MINIFIED_DIR + "build/pdf.worker.js")
|
|
|
|
.pipe(rename("pdf.worker.min.js"))
|
|
|
|
.pipe(gulp.dest(DIST_DIR + "build/")),
|
|
|
|
gulp
|
|
|
|
.src(MINIFIED_DIR + "image_decoders/pdf.image_decoders.js")
|
|
|
|
.pipe(rename("pdf.image_decoders.min.js"))
|
|
|
|
.pipe(gulp.dest(DIST_DIR + "image_decoders/")),
|
|
|
|
gulp
|
|
|
|
.src(COMPONENTS_DIR + "**/*", { base: COMPONENTS_DIR })
|
|
|
|
.pipe(gulp.dest(DIST_DIR + "web/")),
|
|
|
|
gulp
|
|
|
|
.src(IMAGE_DECODERS_DIR + "**/*", { base: IMAGE_DECODERS_DIR })
|
|
|
|
.pipe(gulp.dest(DIST_DIR + "image_decoders")),
|
|
|
|
gulp
|
|
|
|
.src(LIB_DIR + "**/*", { base: LIB_DIR })
|
|
|
|
.pipe(gulp.dest(DIST_DIR + "lib/")),
|
|
|
|
]);
|
|
|
|
}
|
|
|
|
)
|
|
|
|
);
|
|
|
|
|
|
|
|
gulp.task(
|
|
|
|
"dist-install",
|
|
|
|
gulp.series("dist-pre", function(done) {
|
|
|
|
var distPath = DIST_DIR;
|
|
|
|
var opts = {};
|
|
|
|
var installPath = process.env["PDFJS_INSTALL_PATH"];
|
|
|
|
if (installPath) {
|
|
|
|
opts.cwd = installPath;
|
|
|
|
distPath = path.relative(installPath, distPath);
|
|
|
|
}
|
|
|
|
safeSpawnSync("npm", ["install", distPath], opts);
|
|
|
|
done();
|
|
|
|
})
|
|
|
|
);
|
2017-04-19 04:00:53 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task(
|
|
|
|
"dist-repo-git",
|
|
|
|
gulp.series("dist-pre", function(done) {
|
|
|
|
var VERSION = getVersionJSON().version;
|
2019-02-10 01:21:27 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log();
|
|
|
|
console.log("### Committing changes");
|
|
|
|
|
|
|
|
var reason = process.env["PDFJS_UPDATE_REASON"];
|
|
|
|
// Attempt to work-around the broken link, see https://github.com/mozilla/pdf.js/issues/10391
|
|
|
|
if (typeof reason === "string") {
|
|
|
|
var reasonParts = /^(See )(mozilla\/pdf\.js)@tags\/(v\d+\.\d+\.\d+)\s*$/.exec(
|
|
|
|
reason
|
|
|
|
);
|
|
|
|
|
|
|
|
if (reasonParts) {
|
|
|
|
reason =
|
|
|
|
reasonParts[1] +
|
|
|
|
"https://github.com/" +
|
|
|
|
reasonParts[2] +
|
|
|
|
"/releases/tag/" +
|
|
|
|
reasonParts[3];
|
|
|
|
}
|
2019-02-10 01:21:27 +09:00
|
|
|
}
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var message = "PDF.js version " + VERSION + (reason ? " - " + reason : "");
|
|
|
|
safeSpawnSync("git", ["add", "*"], { cwd: DIST_DIR });
|
|
|
|
safeSpawnSync("git", ["commit", "-am", message], { cwd: DIST_DIR });
|
|
|
|
safeSpawnSync("git", ["tag", "-a", "v" + VERSION, "-m", message], {
|
|
|
|
cwd: DIST_DIR,
|
|
|
|
});
|
2017-04-19 04:00:53 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
console.log();
|
|
|
|
console.log("Done. Push with");
|
|
|
|
console.log(
|
2019-12-26 04:03:46 +09:00
|
|
|
" cd " + DIST_DIR + "; git push --tags " + DIST_REPO_URL + " master"
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
);
|
|
|
|
console.log();
|
|
|
|
done();
|
|
|
|
})
|
|
|
|
);
|
2017-04-19 04:00:53 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task("dist", gulp.series("dist-repo-git"));
|
2017-04-19 04:00:53 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task(
|
|
|
|
"mozcentralbaseline",
|
|
|
|
gulp.series("baseline", function(done) {
|
|
|
|
console.log();
|
|
|
|
console.log("### Creating mozcentral baseline environment");
|
2017-02-04 23:19:46 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
// Create a mozcentral build.
|
|
|
|
rimraf.sync(BASELINE_DIR + BUILD_DIR);
|
2016-03-05 00:36:46 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
var workingDirectory = path.resolve(process.cwd(), BASELINE_DIR);
|
|
|
|
safeSpawnSync("gulp", ["mozcentral"], {
|
|
|
|
env: process.env,
|
|
|
|
cwd: workingDirectory,
|
|
|
|
stdio: "inherit",
|
|
|
|
});
|
2017-04-28 04:42:07 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
// Copy the mozcentral build to the mozcentral baseline directory.
|
|
|
|
rimraf.sync(MOZCENTRAL_BASELINE_DIR);
|
|
|
|
mkdirp.sync(MOZCENTRAL_BASELINE_DIR);
|
2017-04-28 04:42:07 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp
|
|
|
|
.src([BASELINE_DIR + BUILD_DIR + "mozcentral/**/*"])
|
2017-04-28 04:42:07 +09:00
|
|
|
.pipe(gulp.dest(MOZCENTRAL_BASELINE_DIR))
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
.on("end", function() {
|
2017-04-28 04:42:07 +09:00
|
|
|
// Commit the mozcentral baseline.
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
safeSpawnSync("git", ["init"], { cwd: MOZCENTRAL_BASELINE_DIR });
|
|
|
|
safeSpawnSync("git", ["add", "."], { cwd: MOZCENTRAL_BASELINE_DIR });
|
|
|
|
safeSpawnSync("git", ["commit", "-m", '"mozcentral baseline"'], {
|
|
|
|
cwd: MOZCENTRAL_BASELINE_DIR,
|
|
|
|
});
|
2017-04-28 04:42:07 +09:00
|
|
|
done();
|
|
|
|
});
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
})
|
|
|
|
);
|
2016-03-05 00:36:46 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task(
|
|
|
|
"mozcentraldiff",
|
|
|
|
gulp.series("mozcentral", "mozcentralbaseline", function(done) {
|
|
|
|
console.log();
|
|
|
|
console.log("### Creating mozcentral diff");
|
2017-04-28 05:59:45 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
// Create the diff between the current mozcentral build and the
|
|
|
|
// baseline mozcentral build, which both exist at this point.
|
|
|
|
// The mozcentral baseline directory is a Git repository, so we
|
|
|
|
// remove all files and copy the current mozcentral build files
|
|
|
|
// into it to create the diff.
|
|
|
|
rimraf.sync(MOZCENTRAL_BASELINE_DIR + "*");
|
2017-04-28 05:59:45 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp
|
|
|
|
.src([BUILD_DIR + "mozcentral/**/*"])
|
2017-04-28 05:59:45 +09:00
|
|
|
.pipe(gulp.dest(MOZCENTRAL_BASELINE_DIR))
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
.on("end", function() {
|
|
|
|
safeSpawnSync("git", ["add", "-A"], { cwd: MOZCENTRAL_BASELINE_DIR });
|
|
|
|
var diff = safeSpawnSync(
|
|
|
|
"git",
|
|
|
|
["diff", "--binary", "--cached", "--unified=8"],
|
|
|
|
{ cwd: MOZCENTRAL_BASELINE_DIR }
|
|
|
|
).stdout;
|
2017-04-28 05:59:45 +09:00
|
|
|
|
|
|
|
createStringSource(MOZCENTRAL_DIFF_FILE, diff)
|
|
|
|
.pipe(gulp.dest(BUILD_DIR))
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
.on("end", function() {
|
|
|
|
console.log(
|
|
|
|
"Result diff can be found at " + BUILD_DIR + MOZCENTRAL_DIFF_FILE
|
|
|
|
);
|
2017-04-28 05:59:45 +09:00
|
|
|
done();
|
|
|
|
});
|
|
|
|
});
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
})
|
|
|
|
);
|
|
|
|
|
|
|
|
gulp.task("externaltest", function(done) {
|
|
|
|
fancylog("Running test-fixtures.js");
|
|
|
|
safeSpawnSync("node", ["external/builder/test-fixtures.js"], {
|
|
|
|
stdio: "inherit",
|
|
|
|
});
|
|
|
|
fancylog("Running test-fixtures_esprima.js");
|
|
|
|
safeSpawnSync("node", ["external/builder/test-fixtures_esprima.js"], {
|
|
|
|
stdio: "inherit",
|
|
|
|
});
|
2018-11-19 02:33:23 +09:00
|
|
|
done();
|
2017-05-04 02:16:37 +09:00
|
|
|
});
|
2019-12-19 05:26:44 +09:00
|
|
|
|
Enable auto-formatting of the entire code-base using Prettier (issue 11444)
Note that Prettier, purposely, has only limited [configuration options](https://prettier.io/docs/en/options.html). The configuration file is based on [the one in `mozilla central`](https://searchfox.org/mozilla-central/source/.prettierrc) with just a few additions (to avoid future breakage if the defaults ever changes).
Prettier is being used for a couple of reasons:
- To be consistent with `mozilla-central`, where Prettier is already in use across the tree.
- To ensure a *consistent* coding style everywhere, which is automatically enforced during linting (since Prettier is used as an ESLint plugin). This thus ends "all" formatting disussions once and for all, removing the need for review comments on most stylistic matters.
Many ESLint options are now redundant, and I've tried my best to remove all the now unnecessary options (but I may have missed some).
Note also that since Prettier considers the `printWidth` option as a guide, rather than a hard rule, this patch resorts to a small hack in the ESLint config to ensure that *comments* won't become too long.
*Please note:* This patch is generated automatically, by appending the `--fix` argument to the ESLint call used in the `gulp lint` task. It will thus require some additional clean-up, which will be done in a *separate* commit.
(On a more personal note, I'll readily admit that some of the changes Prettier makes are *extremely* ugly. However, in the name of consistency we'll probably have to live with that.)
2019-12-25 23:59:37 +09:00
|
|
|
gulp.task(
|
|
|
|
"npm-test",
|
|
|
|
gulp.series(gulp.parallel("lint", "externaltest"), "unittestcli")
|
|
|
|
);
|